A replaceable item designed to provide a stationary seating surface for a mating, moveable item such as a valve disk or the like. The body may have a flange of various shapes. For diesel and gasoline reciprocating engines, see INSERT, ENGINE VALVE SEAT.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED22113*)
IF STYLE/REPLY CODE(s) A1, A2, A3, A4, A8, A9, B1, B2 OR B4 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKK and AJRF and AJRM and ADAS)
IF STYLE/REPLY CODE(s) A6, B3 OR B5 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and ADAS)
IF STYLE/REPLY CODE(s) B6 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAR and ABKW and ADAS)
IF STYLE/REPLY CODE(s) B7, B8 OR B9 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKK and AJRF and AJRM and ADAS and ADAR)
IF STYLE/REPLY CODE(s) A10, A11 OR A12 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKK and AJRF and AJRM and ADAS)
IF STYLE/REPLY CODE(s) A13, B10, B12 OR B14 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKK and AJRF and AJRM and ADAS and ADAR)
IF STYLE/REPLY CODE(s) B11 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAR and ABKW and ADAS)
IF STYLE/REPLY CODE(s) A1A, A4A, B1A, B2A OR B4A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKK and AJRF and AJRM and CQKW)
IF STYLE/REPLY CODE(s) A6A, B3A OR B5A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and CQKW)
IF STYLE/REPLY CODE(s) B6A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAR and ABKW and CQKW)
IF STYLE/REPLY CODE(s) B7A, B8A OR B9A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKK and AJRF and AJRM and CQKW and ADAR)
IF STYLE/REPLY CODE(s) A2A, A3A, A8A, A9A, A10A, A11A OR A12A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKK and AJRF and AJRM and CQKW)
IF STYLE/REPLY CODE(s) A13A, B10A, B12A OR B14A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKK and AJRF and AJRM and CQKW and ADAR)
IF STYLE/REPLY CODE(s) B11A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAR and ABKW and CQKW)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLB8)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| DR02844 | A1 | FAUCET |
| DR02859 | A10 | FAUCET |
| DR02858 | A10A | FAUCET |
| DR02862 | A11 | FAUCET |
| DR02861 | A11A | FAUCET |
| DR02865 | A12 | FAUCET |
| DR02864 | A12A | FAUCET |
| DR02868 | A13 | FAUCET |
| DR02867 | A13A | FAUCET |
| DR02843 | A1A | FAUCET |
| DR02846 | A2 | FAUCET |
| DR02845 | A2A | FAUCET |
| DR02848 | A3 | FAUCET |
| DR02847 | A3A | FAUCET |
| DR02850 | A4 | FAUCET |
| DR02849 | A4A | FAUCET |
| DR02852 | A6 | FAUCET |
| DR02851 | A6A | FAUCET |
| DR02854 | A8 | FAUCET |
| DR02853 | A8A | FAUCET |
| DR02856 | A9 | FAUCET |
| DR02855 | A9A | FAUCET |
| DR02870 | B1 | THREADED FLANGED |
| DR02887 | B10 | PLAIN FLANGED |
| DR02888 | B10A | PLAIN FLANGED |
| DR02890 | B11 | PLAIN |
| DR02891 | B11A | PLAIN |
| DR02893 | B12 | PLAIN FLANGED |
| DR02894 | B12A | PLAIN FLANGED |
| DR02895 | B14 | PLAIN FLANGED |
| DR02897 | B14A | PLAIN FLANGED |
| DR02869 | B1A | THREADED FLANGED |
| DR02872 | B2 | THREADED FLANGED |
| DR02871 | B2A | THREADED FLANGED |
| DR02873 | B3 | DOUBLE FLANGED |
| DR02874 | B3A | DOUBLE FLANGED |
| DR02876 | B4 | THREADED FLANGED |
| DR02875 | B4A | THREADED FLANGED |
| DR04095 | B5 | PLAIN THREADED |
| DR02877 | B5A | PLAIN THREADED |
| DR02879 | B6 | PLAIN |
| DR02878 | B6A | PLAIN |
| DR02881 | B7 | PLAIN FLANGED |
| DR02880 | B7A | PLAIN FLANGED |
| DR02883 | B8 | PLAIN FLANGED |
| DR02882 | B8A | PLAIN FLANGED |
| DR02885 | B9 | PLAIN FLANGED |
| DR02884 | B9A | PLAIN FLANGED |
ABKK*JFLANGE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A FLANGE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKKJAA2.0*;ABKKJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAC2.0*;ABKWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAR*JBODY OUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADARJAB2.0*;ADARJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAS*JBODY INSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A BODY,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADASJAB2.0*;ADASJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJRF*JFLANGE SEAT TO DISK END HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJRFJAA2.0*;AJRFJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJRM*JUNDER FLANGE HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJRMJAA2.0*;AJRMJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CQKW*JBODY STEPPED INSIDE DIAMETER
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQKW3BBDJAB2.0*;CQKW3BBDJAB2.0$JAB2.0*;CQKW3BBDJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BBB | FIRST STEP |
| 3BBC | SECOND STEP |
| 3BBD | THIRD STEP |
| 3BBE | FOURTH STEP |
| 3BBF | FIFTH STEP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AATDGSB000*;MATT3AATDGSB000$DPCD000*;MATT3AATDGSB000$$DPCD000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACU | FLANGE |
| 3AEE | OVERALL |
| 3AWL | FACE |
| 3BAU | SEAT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL1060 | ALUMINUM ALLOY 1060 |
| AL1100 | ALUMINUM ALLOY 1100 |
| AL0113 | ALUMINUM ALLOY 113 |
| AL2011 | ALUMINUM ALLOY 2011 |
| AL2014 | ALUMINUM ALLOY 2014 |
| AL2017 | ALUMINUM ALLOY 2017 |
| AL2018 | ALUMINUM ALLOY 2018 |
| AL2020 | ALUMINUM ALLOY 2020 |
| AL2024 | ALUMINUM ALLOY 2024 |
| AL2025 | ALUMINUM ALLOY 2025 |
| AL2117 | ALUMINUM ALLOY 2117 |
| AL2218 | ALUMINUM ALLOY 2218 |
| AL2219 | ALUMINUM ALLOY 2219 |
| AL0038 | ALUMINUM ALLOY 222.0 |
| AL0039 | ALUMINUM ALLOY 242.0 |
| AL2618 | ALUMINUM ALLOY 2618 |
| AL0025 | ALUMINUM ALLOY 295.0 |
| AL3003 | ALUMINUM ALLOY 3003 |
| AL3004 | ALUMINUM ALLOY 3004 |
| AL0035 | ALUMINUM ALLOY 319.0 |
| AL0036 | ALUMINUM ALLOY 328.0 |
| AL0045 | ALUMINUM ALLOY 355.0 |
| AL0046 | ALUMINUM ALLOY 356.0 |
| AL4032 | ALUMINUM ALLOY 4032 |
| AL0044 | ALUMINUM ALLOY 443.0 |
| AL5005 | ALUMINUM ALLOY 5005 |
| AL5046 | ALUMINUM ALLOY 5046 |
| AL0505 | ALUMINUM ALLOY 505 |
| AL5050 | ALUMINUM ALLOY 5050 |
| AL5052 | ALUMINUM ALLOY 5052 |
| AL5054 | ALUMINUM ALLOY 5054 |
| AL5056 | ALUMINUM ALLOY 5056 |
| AL5083 | ALUMINUM ALLOY 5083 |
| AL5086 | ALUMINUM ALLOY 5086 |
| AL0026 | ALUMINUM ALLOY 514.0 |
| AL0043 | ALUMINUM ALLOY 520.0 |
| AL5356 | ALUMINUM ALLOY 5356 |
| AL5454 | ALUMINUM ALLOY 5454 |
| AL5456 | ALUMINUM ALLOY 5456 |
| AL6061 | ALUMINUM ALLOY 6061 |
| AL6062 | ALUMINUM ALLOY 6062 |
| AL6063 | ALUMINUM ALLOY 6063 |
| AL6066 | ALUMINUM ALLOY 6066 |
| AL0607 | ALUMINUM ALLOY 607 |
| AL6151 | ALUMINUM ALLOY 6151 |
| AL0047 | ALUMINUM ALLOY 705.0 |
| AL0048 | ALUMINUM ALLOY 707.0 |
| AL7075 | ALUMINUM ALLOY 7075 |
| AL7076 | ALUMINUM ALLOY 7076 |
| AL7079 | ALUMINUM ALLOY 7079 |
| AL0049 | ALUMINUM ALLOY 713.0 |
| AL7178 | ALUMINUM ALLOY 7178 |
| AL8040 | ALUMINUM ALLOY 8040 |
| AL0002 | ALUMINUM ALLOY A356.0 |
| AL0042 | ALUMINUM ALLOY A712.0 |
| AL0001 | ALUMINUM ALLOY AL-17 |
| AL0040 | ALUMINUM ALLOY B295.0 |
| AL0033 | ALUMINUM ALLOY B443.0 |
| AL0041 | ALUMINUM ALLOY B514.0 |
| AL0008 | ALUMINUM ALLOY C443.0 |
| AL0024 | ALUMINUM ALLOY D712.0 |
| ASA000 | ASBESTOS |
| BEA000 | BERYLLIUM |
| CNA000 | CARBON |
| CNB000 | CARBON GRAPHITE |
| CSA000 | CELLULOSE |
| CLD000 | CERAMIC |
| CRA000 | CHROMIUM |
| CRB000 | CHROMIUM ALLOY |
| CTA000 | COBALT |
| CTB000 | COBALT ALLOY |
| CT0002 | COBALT COMP 1 |
| CT0003 | COBALT COMP 3 |
| CT0005 | COBALT COMP 31 |
| CT0004 | COBALT COMP 6 |
| CT0001 | COBALT COMP L-605 |
| CT0009 | COBALT COMP VF-2 |
| CT0006 | COBALT COMP VF-5 |
| CT0007 | COBALT COMP VF-6 |
| CT0008 | COBALT COMP VF-7 |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CU0059 | COPPER ALLOY 101 |
| CU0063 | COPPER ALLOY 110 |
| CU0064 | COPPER ALLOY 111 |
| CU0068 | COPPER ALLOY 170 |
| CU0069 | COPPER ALLOY 172 |
| CU0233 | COPPER ALLOY 173 |
| CU0070 | COPPER ALLOY 19 |
| CU0074 | COPPER ALLOY 230 |
| CU0075 | COPPER ALLOY 24 |
| CU0076 | COPPER ALLOY 240 |
| CU0077 | COPPER ALLOY 25 |
| CU0078 | COPPER ALLOY 25S |
| CU0079 | COPPER ALLOY 260 |
| CU0080 | COPPER ALLOY 268 |
| CU0081 | COPPER ALLOY 270 |
| CU0088 | COPPER ALLOY 342 |
| CU0089 | COPPER ALLOY 353 |
| CU0090 | COPPER ALLOY 356 |
| CU0357 | COPPER ALLOY 357 |
| CU0091 | COPPER ALLOY 360 |
| CU0092 | COPPER ALLOY 377 |
| CU0095 | COPPER ALLOY 400 |
| CU0097 | COPPER ALLOY 430 |
| CU0098 | COPPER ALLOY 462 |
| CU0099 | COPPER ALLOY 464 |
| CU0100 | COPPER ALLOY 482 |
| CU0101 | COPPER ALLOY 485 |
| CU0103 | COPPER ALLOY 510 |
| CU0104 | COPPER ALLOY 511 |
| CU0105 | COPPER ALLOY 521 |
| CU0106 | COPPER ALLOY 524 |
| CU0107 | COPPER ALLOY 532-CANCELED |
| CU0108 | COPPER ALLOY 534 |
| CU0109 | COPPER ALLOY 544 |
| CU0110 | COPPER ALLOY 6 |
| CU0111 | COPPER ALLOY 606 |
| CU0112 | COPPER ALLOY 610 |
| CU0113 | COPPER ALLOY 612-CANCELED |
| CU0114 | COPPER ALLOY 613 |
| CU0115 | COPPER ALLOY 614 |
| CU0116 | COPPER ALLOY 617-CANCELED |
| CU0118 | COPPER ALLOY 620 CANCELED |
| CU0119 | COPPER ALLOY 623 |
| CU0120 | COPPER ALLOY 628-CANCELED |
| CU0122 | COPPER ALLOY 630 |
| CU0632 | COPPER ALLOY 632 |
| CU0123 | COPPER ALLOY 637-CANCELED |
| CU0124 | COPPER ALLOY 639-CANCELED |
| CU0126 | COPPER ALLOY 640 |
| CU0127 | COPPER ALLOY 642 |
| CU0128 | COPPER ALLOY 647 |
| CU0129 | COPPER ALLOY 651 |
| CU0130 | COPPER ALLOY 653-CANCELED |
| CU0131 | COPPER ALLOY 655 |
| CU0133 | COPPER ALLOY 660 |
| CU0134 | COPPER ALLOY 661 |
| CU0135 | COPPER ALLOY 67 |
| CU0676 | COPPER ALLOY 676 |
| CU0136 | COPPER ALLOY 692-CANCELED |
| CU0694 | COPPER ALLOY 694 |
| CU0137 | COPPER ALLOY 7 |
| CU0138 | COPPER ALLOY 70 |
| CU0146 | COPPER ALLOY 735 |
| CU0147 | COPPER ALLOY 74 |
| CU0148 | COPPER ALLOY 745 |
| CU0149 | COPPER ALLOY 746 |
| CU0150 | COPPER ALLOY 752 |
| CU0151 | COPPER ALLOY 762 |
| CU0152 | COPPER ALLOY 764 |
| CU0153 | COPPER ALLOY 766 |
| CU0157 | COPPER ALLOY 770 |
| CU0158 | COPPER ALLOY 79 |
| CU0160 | COPPER ALLOY 791 |
| CU0161 | COPPER ALLOY 792 |
| CU0162 | COPPER ALLOY 794 |
| CU0166 | COPPER ALLOY 820 |
| CU0167 | COPPER ALLOY 824 |
| CU0168 | COPPER ALLOY 825 |
| CU0169 | COPPER ALLOY 826 |
| CU0170 | COPPER ALLOY 827 |
| CU0171 | COPPER ALLOY 828 |
| CU0172 | COPPER ALLOY 836 |
| CU0173 | COPPER ALLOY 838 |
| CU0174 | COPPER ALLOY 842 |
| CU0175 | COPPER ALLOY 844 |
| CU0845 | COPPER ALLOY 845 |
| CU0176 | COPPER ALLOY 848 |
| CU0177 | COPPER ALLOY 852 |
| CU0179 | COPPER ALLOY 855 |
| CU0180 | COPPER ALLOY 857 |
| CU0181 | COPPER ALLOY 861 |
| CU0182 | COPPER ALLOY 862 |
| CU0183 | COPPER ALLOY 863 |
| CU0184 | COPPER ALLOY 864 |
| CU0185 | COPPER ALLOY 865 |
| CU0186 | COPPER ALLOY 868 |
| CU0187 | COPPER ALLOY 872 |
| CU0188 | COPPER ALLOY 874 |
| CU0194 | COPPER ALLOY 90 |
| CU0195 | COPPER ALLOY 903 |
| CU0196 | COPPER ALLOY 905 |
| CU0197 | COPPER ALLOY 907 |
| CU0198 | COPPER ALLOY 910 |
| CU0199 | COPPER ALLOY 913 |
| CU0200 | COPPER ALLOY 915-CANCELED |
| CU0201 | COPPER ALLOY 916 |
| CU0202 | COPPER ALLOY 922 |
| CU0203 | COPPER ALLOY 923 |
| CU0204 | COPPER ALLOY 925 |
| CU0205 | COPPER ALLOY 927 |
| CU0206 | COPPER ALLOY 932 |
| CU0207 | COPPER ALLOY 934 |
| CU0208 | COPPER ALLOY 935 |
| CU0209 | COPPER ALLOY 937 |
| CU0210 | COPPER ALLOY 938 |
| CU0211 | COPPER ALLOY 939 |
| CU0212 | COPPER ALLOY 940 |
| CU0213 | COPPER ALLOY 941 |
| CU0214 | COPPER ALLOY 943 |
| CU0215 | COPPER ALLOY 947 |
| CU0217 | COPPER ALLOY 952 |
| CU0218 | COPPER ALLOY 953 |
| CU0219 | COPPER ALLOY 954 |
| CU0220 | COPPER ALLOY 955 |
| CU0221 | COPPER ALLOY 957 |
| CU0222 | COPPER ALLOY 958 |
| CU0223 | COPPER ALLOY 962 |
| CU0224 | COPPER ALLOY 964 |
| CU0976 | COPPER ALLOY 976 |
| CU0978 | COPPER ALLOY 978 |
| CU0995 | COPPER ALLOY 995 |
| CU0007 | COPPER ALLOY A6 |
| CU0008 | COPPER ALLOY A7 |
| CU0009 | COPPER ALLOY A8 |
| CU0014 | COPPER ALLOY B-12 |
| CU0015 | COPPER ALLOY B-14 |
| CU0016 | COPPER ALLOY B-16 |
| CU0017 | COPPER ALLOY B-17 |
| CU0240 | COPPER ALLOY B6 |
| CU0038 | COPPER ALLOY C21 |
| CU0041 | COPPER ALLOY C6 |
| CU0019 | COPPER ALLOY CA110 |
| CU0226 | COPPER ALLOY CA111 |
| CU0259 | COPPER ALLOY CA113 |
| CU0260 | COPPER ALLOY CA114 |
| CU0261 | COPPER ALLOY CA116 |
| CU0232 | COPPER ALLOY CA122 |
| CU0238 | COPPER ALLOY CA220 |
| CU0020 | COPPER ALLOY CA230 |
| CU0021 | COPPER ALLOY CA240 |
| CU0022 | COPPER ALLOY CA260 |
| CU0023 | COPPER ALLOY CA263 |
| CU0024 | COPPER ALLOY CA268 |
| CU0025 | COPPER ALLOY CA270 |
| CU0026 | COPPER ALLOY CA330 |
| CU0027 | COPPER ALLOY CA360 |
| CU0242 | COPPER ALLOY CA377 |
| CU0028 | COPPER ALLOY CA464 |
| CU0029 | COPPER ALLOY CA510 |
| CU0030 | COPPER ALLOY CA521 |
| CU0262 | COPPER ALLOY CA532 |
| CU0256 | COPPER ALLOY CA617 |
| CU0031 | COPPER ALLOY CA623 |
| CU0257 | COPPER ALLOY CA624 |
| CU0258 | COPPER ALLOY CA637 |
| CU0032 | COPPER ALLOY CA836 |
| CU0033 | COPPER ALLOY CA865 |
| CU0034 | COPPER ALLOY CA905 |
| CU0227 | COPPER ALLOY CA907 |
| CU0255 | COPPER ALLOY CA927 |
| CU0035 | COPPER ALLOY CA932 |
| CU0036 | COPPER ALLOY CA935 |
| CU0037 | COPPER ALLOY CA937 |
| CU0234 | COPPER ALLOY CA938 |
| CU0251 | COPPER ALLOY D1 |
| CU0253 | COPPER ALLOY E3 |
| CU0254 | COPPER ALLOY E4 |
| CU0054 | COPPER ALLOY G1 |
| CPA000 | ELASTOMER CARBOXYLIC |
| CPB000 | ELASTOMER FLUOROCARBON |
| FBB001 | FABRIC, NYLON |
| FLR000 | FLUOROCARBON RUBBER |
| GSB000 | GLASS FIBER |
| AUA000 | GOLD |
| GFA000 | GRAPHITE |
| FEA000 | IRON |
| FEF000 | IRON ALLOY |
| FE0015 | IRON ALLOY 651 |
| FE0019 | IRON ALLOY 660 |
| FE0002 | IRON ALLOY HEV-1 |
| FE0003 | IRON ALLOY N-155 |
| FE0048 | IRON CAST UNS F13101 |
| PBA000 | LEAD |
| PBB000 | LEAD ALLOY |
| PB0001 | LEAD ALLOY B |
| PB0002 | LEAD ALLOY C |
| PB0003 | LEAD ALLOY D |
| LRA000 | LEATHER |
| MGA000 | MAGNESIUM |
| MGB000 | MAGNESIUM ALLOY |
| MG0001 | MAGNESIUM ALLOY AZ31B |
| MG0010 | MAGNESIUM ALLOY AZ31C |
| MG0011 | MAGNESIUM ALLOY AZ31Z |
| MG0002 | MAGNESIUM ALLOY AZ61A |
| MG0003 | MAGNESIUM ALLOY AZ80A |
| MG0004 | MAGNESIUM ALLOY HK31A |
| MG0005 | MAGNESIUM ALLOY M1A |
| MG0006 | MAGNESIUM ALLOY ZK60A |
| MNA000 | MANGANESE |
| MTA000 | METAL GRAPHITE |
| MBA000 | MOLYBDENUM |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| NL0008 | NICKEL ALLOY 400 |
| NL0025 | NICKEL ALLOY 49 |
| NL0019 | NICKEL ALLOY 502 |
| NL0009 | NICKEL ALLOY 600 |
| NL0012 | NICKEL ALLOY 625 |
| NL0010 | NICKEL ALLOY 718 |
| NL0030 | NICKEL ALLOY 80A |
| NL0031 | NICKEL ALLOY 90 |
| NL0021 | NICKEL ALLOY 902 |
| NL0001 | NICKEL ALLOY A |
| NL0002 | NICKEL ALLOY B |
| NL0014 | NICKEL ALLOY C |
| NL0011 | NICKEL ALLOY D |
| NL0013 | NICKEL ALLOY E |
| NL0022 | NICKEL ALLOY F |
| NL0003 | NICKEL ALLOY H |
| NL0026 | NICKEL ALLOY HEV-2 |
| NL0027 | NICKEL ALLOY HEV-3 |
| NL0028 | NICKEL ALLOY HEV-5 |
| NL0029 | NICKEL ALLOY HEV-6 |
| NL0018 | NICKEL ALLOY K-500 |
| NL0004 | NICKEL ALLOY L |
| NL0005 | NICKEL ALLOY M252 |
| NL0023 | NICKEL ALLOY NT4 |
| NL0017 | NICKEL ALLOY R-405 |
| NL0024 | NICKEL ALLOY S |
| NL0032 | NICKEL ALLOY VF-1 |
| NL0033 | NICKEL ALLOY VF-3 |
| NL0034 | NICKEL ALLOY VF-4 |
| NL0007 | NICKEL ALLOY X-750 |
| NLC000 | NICKEL SILVER |
| PCA000 | PLASTIC |
| PCB000 | PLASTIC ACETAL |
| PCC000 | PLASTIC ACRYLATE |
| PCD000 | PLASTIC ACRYLIC |
| PCAX00 | PLASTIC ACRYLONITRILE |
| PCE000 | PLASTIC ALKYD |
| PCF000 | PLASTIC ALLYL |
| PCAN00 | PLASTIC CELLULOSE ACETATE |
| PCAAP0 | PLASTIC CHLORINATED POLYETHER |
| PCAAQ0 | PLASTIC CHLOROTRIFLUOROETHYLENE |
| PC0001 | PLASTIC COMP 1 |
| PC0002 | PLASTIC COMP 2 |
| PC0004 | PLASTIC COMP 4 |
| PC0005 | PLASTIC COMP 5 |
| PCG000 | PLASTIC DIALLYL PHTHALATE |
| PCH000 | PLASTIC EPOXY |
| PCBR00 | PLASTIC FLUORINATED ETHYLENE PROPYLENE |
| PCAAD0 | PLASTIC FLUOROCARBON |
| PCJ000 | PLASTIC MELAMINE |
| PCK000 | PLASTIC METHYL METHACRYLATE |
| PCL000 | PLASTIC NITRATE |
| PCCB00 | PLASTIC NYLON |
| PCM000 | PLASTIC PHENOL FORMALDEHYDE (PMO) |
| PCN000 | PLASTIC PHENOLIC |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCR000 | PLASTIC POLYCARBONATE |
| PCS000 | PLASTIC POLYCHLOROFLUOROETHYLENE |
| PCT000 | PLASTIC POLYCHLOROTRIFLUOROETHYLENE |
| PCW000 | PLASTIC POLYESTER |
| PCBS00 | PLASTIC POLYETHER |
| PCX000 | PLASTIC POLYETHYLENE |
| PCY000 | PLASTIC POLYETHYLENE TEREPHTHALATE (PET) |
| PCZ000 | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE |
| PCAB00 | PLASTIC POLYOLEFIN |
| PCAC00 | PLASTIC POLYPROPYLENE |
| PCAD00 | PLASTIC POLYSTYRENE |
| PCAF00 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCAG00 | PLASTIC POLYTRIFLUOROCHLOROETHYLENE |
| PCAH00 | PLASTIC POLYURETHANE |
| PCBM00 | PLASTIC POLYVINYL ACETATE |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| PCBT00 | PLASTIC POLYVINYL FLUORIDE |
| PCBW00 | PLASTIC POLYVINYLIDENE |
| PCBG00 | PLASTIC POLYVINYLIDENE CHLORIDE |
| PCAL00 | PLASTIC UREA |
| PCBA00 | PLASTIC URETHANE |
| PCAP00 | PLASTIC VINYL |
| PCBX00 | PLASTIC VINYLIDENE FLUORIDE |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RCE000 | RUBBER |
| RCH000 | RUBBER ACRYLATE |
| RCF000 | RUBBER BUNA N |
| RCG000 | RUBBER BUNA S |
| RCD000 | RUBBER CHLOROPRENE |
| RC0013 | RUBBER FLUOROCARBON CLASS FPM |
| RCA000 | RUBBER NATURAL |
| RCM000 | RUBBER POLYACRYLATE |
| RCJ000 | RUBBER POLYBUTADIENE |
| RCN000 | RUBBER POLYCHLOROTRIFLUOROETHYLENE |
| RCL000 | RUBBER POLYETHYLENE |
| RCP000 | RUBBER POLYISOBUTYLENE |
| RCQ000 | RUBBER POLYSULFIDE |
| RCZ000 | RUBBER POLYURETHANE |
| RCC000 | RUBBER SILICONE |
| RC0021 | RUBBER SILICONE CLASS Q |
| RCB000 | RUBBER SYNTHETIC |
| RCK000 | RUBBER SYNTHETIC-NATURAL |
| RCR000 | RUBBER URETHANE |
| SLC000 | SILICON |
| SLA000 | SILICON ALLOY |
| SLB000 | SILICON CARBIDE |
| AGA000 | SILVER |
| AGF000 | SILVER ALLOY |
| STA000 | STEEL |
| ST1005 | STEEL COMP 1005 |
| ST1006 | STEEL COMP 1006 |
| ST1008 | STEEL COMP 1008 |
| ST1009 | STEEL COMP 1009 |
| ST1010 | STEEL COMP 1010 |
| ST1011 | STEEL COMP 1011 |
| ST1012 | STEEL COMP 1012 |
| ST1013 | STEEL COMP 1013 |
| ST1015 | STEEL COMP 1015 |
| ST1016 | STEEL COMP 1016 |
| ST1017 | STEEL COMP 1017 |
| ST1018 | STEEL COMP 1018 |
| ST1019 | STEEL COMP 1019 |
| ST1020 | STEEL COMP 1020 |
| ST1021 | STEEL COMP 1021 |
| ST1022 | STEEL COMP 1022 |
| ST1023 | STEEL COMP 1023 |
| ST1024 | STEEL COMP 1024 |
| ST1025 | STEEL COMP 1025 |
| ST1026 | STEEL COMP 1026 |
| ST1027 | STEEL COMP 1027 |
| ST1029 | STEEL COMP 1029 |
| ST1030 | STEEL COMP 1030 |
| ST1031 | STEEL COMP 1031 |
| ST1033 | STEEL COMP 1033 |
| ST1034 | STEEL COMP 1034 |
| ST1035 | STEEL COMP 1035 |
| ST1036 | STEEL COMP 1036 |
| ST1037 | STEEL COMP 1037 |
| ST1038 | STEEL COMP 1038 |
| ST1039 | STEEL COMP 1039 |
| ST1040 | STEEL COMP 1040 |
| ST1041 | STEEL COMP 1041 |
| ST1042 | STEEL COMP 1042 |
| ST1043 | STEEL COMP 1043 |
| ST1044 | STEEL COMP 1044 |
| ST1045 | STEEL COMP 1045 |
| ST1046 | STEEL COMP 1046 |
| ST1048 | STEEL COMP 1048 |
| ST1049 | STEEL COMP 1049 |
| ST1050 | STEEL COMP 1050 |
| ST1051 | STEEL COMP 1051 |
| ST1052 | STEEL COMP 1052 |
| ST1053 | STEEL COMP 1053 |
| ST1054 | STEEL COMP 1054 |
| ST1055 | STEEL COMP 1055 |
| ST1059 | STEEL COMP 1059 |
| ST1061 | STEEL COMP 1061 |
| ST1064 | STEEL COMP 1064 |
| ST1065 | STEEL COMP 1065 |
| ST1066 | STEEL COMP 1066 |
| ST1069 | STEEL COMP 1069 |
| ST1070 | STEEL COMP 1070 |
| ST1071 | STEEL COMP 1071 |
| ST1072 | STEEL COMP 1072 |
| ST1074 | STEEL COMP 1074 |
| ST1075 | STEEL COMP 1075 |
| ST1078 | STEEL COMP 1078 |
| ST1080 | STEEL COMP 1080 |
| ST1084 | STEEL COMP 1084 |
| ST1085 | STEEL COMP 1085 |
| ST1086 | STEEL COMP 1086 |
| ST1090 | STEEL COMP 1090 |
| ST1095 | STEEL COMP 1095 |
| ST1108 | STEEL COMP 1108 |
| ST1109 | STEEL COMP 1109 |
| ST1110 | STEEL COMP 1110 |
| ST1111 | STEEL COMP 1111 |
| ST1112 | STEEL COMP 1112 |
| ST1113 | STEEL COMP 1113 |
| ST1114 | STEEL COMP 1114 |
| ST1115 | STEEL COMP 1115 |
| ST1116 | STEEL COMP 1116 |
| ST1117 | STEEL COMP 1117 |
| ST1118 | STEEL COMP 1118 |
| ST1119 | STEEL COMP 1119 |
| ST1120 | STEEL COMP 1120 |
| ST1132 | STEEL COMP 1132 |
| ST1137 | STEEL COMP 1137 |
| ST1139 | STEEL COMP 1139 |
| ST1140 | STEEL COMP 1140 |
| ST1141 | STEEL COMP 1141 |
| ST1144 | STEEL COMP 1144 |
| ST1145 | STEEL COMP 1145 |
| ST1146 | STEEL COMP 1146 |
| ST1151 | STEEL COMP 1151 |
| ST1211 | STEEL COMP 1211 |
| ST1212 | STEEL COMP 1212 |
| ST1213 | STEEL COMP 1213 |
| ST1215 | STEEL COMP 1215 |
| ST0063 | STEEL COMP 12L14 |
| ST0064 | STEEL COMP 12L15 |
| ST1315 | STEEL COMP 1315 |
| ST1330 | STEEL COMP 1330 |
| ST0065 | STEEL COMP 1330H |
| ST1335 | STEEL COMP 1335 |
| ST0066 | STEEL COMP 1335H |
| ST1340 | STEEL COMP 1340 |
| ST0067 | STEEL COMP 1340H |
| ST1345 | STEEL COMP 1345 |
| ST0068 | STEEL COMP 1345H |
| ST0135 | STEEL COMP 135 |
| ST0227 | STEEL COMP 14-4PH |
| ST1541 | STEEL COMP 1541 |
| ST1547 | STEEL COMP 1547 |
| ST0069 | STEEL COMP 15-5PH |
| ST0071 | STEEL COMP 17-4PH |
| ST0072 | STEEL COMP 17-7PH |
| ST0073 | STEEL COMP 19-9DL |
| ST0074 | STEEL COMP 19-9DX |
| ST0201 | STEEL COMP 201 |
| ST0202 | STEEL COMP 202 |
| ST0167 | STEEL COMP 21-6-9 |
| ST2315 | STEEL COMP 2315 |
| ST0301 | STEEL COMP 301 |
| ST0302 | STEEL COMP 302 |
| ST0180 | STEEL COMP 302B |
| ST0303 | STEEL COMP 303 |
| ST0166 | STEEL COMP 303 PLUS X |
| ST0157 | STEEL COMP 303CU |
| ST0077 | STEEL COMP 303F |
| ST0165 | STEEL COMP 303MA |
| ST0158 | STEEL COMP 303PB |
| ST0078 | STEEL COMP 303S |
| ST0079 | STEEL COMP 303SE |
| ST0304 | STEEL COMP 304 |
| ST0080 | STEEL COMP 304L |
| ST0305 | STEEL COMP 305 |
| ST0152 | STEEL COMP 308 |
| ST0309 | STEEL COMP 309 |
| ST0153 | STEEL COMP 309S |
| ST0310 | STEEL COMP 310 |
| ST0154 | STEEL COMP 310S |
| ST0155 | STEEL COMP 314 |
| ST0316 | STEEL COMP 316 |
| ST0082 | STEEL COMP 316L |
| ST0317 | STEEL COMP 317 |
| ST1961 | STEEL COMP 320 |
| ST0321 | STEEL COMP 321 |
| ST0323 | STEEL COMP 323 |
| ST0324 | STEEL COMP 324 |
| ST0347 | STEEL COMP 347 |
| ST0348 | STEEL COMP 348 |
| ST0384 | STEEL COMP 384 |
| ST0385 | STEEL COMP 385 |
| ST4012 | STEEL COMP 4012 |
| ST4023 | STEEL COMP 4023 |
| ST4024 | STEEL COMP 4024 |
| ST4027 | STEEL COMP 4027 |
| ST0084 | STEEL COMP 4027H |
| ST4028 | STEEL COMP 4028 |
| ST0228 | STEEL COMP 4028H |
| ST0403 | STEEL COMP 403 |
| ST4037 | STEEL COMP 4037 |
| ST0085 | STEEL COMP 4037H |
| ST4042 | STEEL COMP 4042 |
| ST0086 | STEEL COMP 4042H |
| ST4047 | STEEL COMP 4047 |
| ST0087 | STEEL COMP 4047H |
| ST0405 | STEEL COMP 405 |
| ST0410 | STEEL COMP 410 |
| ST4118 | STEEL COMP 4118 |
| ST0229 | STEEL COMP 4118H |
| ST4120 | STEEL COMP 4120 |
| ST4130 | STEEL COMP 4130 |
| ST0090 | STEEL COMP 4130H |
| ST4135 | STEEL COMP 4135 |
| ST0091 | STEEL COMP 4135H |
| ST4137 | STEEL COMP 4137 |
| ST0092 | STEEL COMP 4137H |
| ST0414 | STEEL COMP 414 |
| ST4140 | STEEL COMP 4140 |
| ST0093 | STEEL COMP 4140H |
| ST4142 | STEEL COMP 4142 |
| ST0094 | STEEL COMP 4142H |
| ST4145 | STEEL COMP 4145 |
| ST0095 | STEEL COMP 4145H |
| ST4147 | STEEL COMP 4147 |
| ST0096 | STEEL COMP 4147H |
| ST4150 | STEEL COMP 4150 |
| ST0097 | STEEL COMP 4150H |
| ST0416 | STEEL COMP 416 |
| ST4161 | STEEL COMP 4161 |
| ST0230 | STEEL COMP 4161H |
| ST0099 | STEEL COMP 416SE |
| ST0420 | STEEL COMP 420 |
| ST0100 | STEEL COMP 420F |
| ST0231 | STEEL COMP 422M |
| ST0430 | STEEL COMP 430 |
| ST0101 | STEEL COMP 430F |
| ST0172 | STEEL COMP 430FSE |
| ST0431 | STEEL COMP 431 |
| ST4320 | STEEL COMP 4320 |
| ST0102 | STEEL COMP 4320H |
| ST4340 | STEEL COMP 4340 |
| ST0104 | STEEL COMP 4340H |
| ST0105 | STEEL COMP 440A |
| ST0106 | STEEL COMP 440B |
| ST0107 | STEEL COMP 440C |
| ST0108 | STEEL COMP 440F |
| ST4419 | STEEL COMP 4419 |
| ST0232 | STEEL COMP 4419H |
| ST0442 | STEEL COMP 442 |
| ST0446 | STEEL COMP 446 |
| ST4615 | STEEL COMP 4615 |
| ST4621 | STEEL COMP 4621 |
| ST0110 | STEEL COMP 4621H |
| ST4626 | STEEL COMP 4626 |
| ST0233 | STEEL COMP 4626H |
| ST4718 | STEEL COMP 4718 |
| ST0234 | STEEL COMP 4718H |
| ST4720 | STEEL COMP 4720 |
| ST0235 | STEEL COMP 4720H |
| ST4815 | STEEL COMP 4815 |
| ST0111 | STEEL COMP 4815H |
| ST4817 | STEEL COMP 4817 |
| ST0236 | STEEL COMP 4817H |
| ST4820 | STEEL COMP 4820 |
| ST0112 | STEEL COMP 4820H |
| ST0501 | STEEL COMP 501 |
| ST5015 | STEEL COMP 5015 |
| ST0502 | STEEL COMP 502 |
| ST0113 | STEEL COMP 50B44 |
| ST0237 | STEEL COMP 50B44H |
| ST0238 | STEEL COMP 50B46 |
| ST0239 | STEEL COMP 50B46H |
| ST0240 | STEEL COMP 50B50 |
| ST0241 | STEEL COMP 50B50H |
| ST0114 | STEEL COMP 50B60 |
| ST0164 | STEEL COMP 50B60H |
| ST5120 | STEEL COMP 5120 |
| ST0117 | STEEL COMP 5120H |
| ST5130 | STEEL COMP 5130 |
| ST0118 | STEEL COMP 5130H |
| ST5132 | STEEL COMP 5132 |
| ST0119 | STEEL COMP 5132H |
| ST5135 | STEEL COMP 5135 |
| ST0120 | STEEL COMP 5135H |
| ST5140 | STEEL COMP 5140 |
| ST0121 | STEEL COMP 5140H |
| ST5145 | STEEL COMP 5145 |
| ST0122 | STEEL COMP 5145H |
| ST5147 | STEEL COMP 5147 |
| ST0123 | STEEL COMP 5147H |
| ST5150 | STEEL COMP 5150 |
| ST0242 | STEEL COMP 5150H |
| ST5155 | STEEL COMP 5155 |
| ST0191 | STEEL COMP 5155H |
| ST5160 | STEEL COMP 5160 |
| ST0124 | STEEL COMP 5160H |
| ST0115 | STEEL COMP 51B60 |
| ST0116 | STEEL COMP 51B60H |
| ST0125 | STEEL COMP 52100 |
| ST6118 | STEEL COMP 6118 |
| ST0185 | STEEL COMP 6118H |
| ST0615 | STEEL COMP 615 |
| ST6150 | STEEL COMP 6150 |
| ST0630 | STEEL COMP 630 |
| ST0217 | STEEL COMP 71360 |
| ST8115 | STEEL COMP 8115 |
| ST8122 | STEEL COMP 8122 |
| ST0173 | STEEL COMP 81B45 |
| ST0192 | STEEL COMP 81B45H |
| ST8615 | STEEL COMP 8615 |
| ST8617 | STEEL COMP 8617 |
| ST0136 | STEEL COMP 8617H |
| ST8620 | STEEL COMP 8620 |
| ST0137 | STEEL COMP 8620H |
| ST8622 | STEEL COMP 8622 |
| ST0138 | STEEL COMP 8622H |
| ST8625 | STEEL COMP 8625 |
| ST0248 | STEEL COMP 8625H |
| ST8627 | STEEL COMP 8627 |
| ST0243 | STEEL COMP 8627H |
| ST8630 | STEEL COMP 8630 |
| ST0139 | STEEL COMP 8630H |
| ST8637 | STEEL COMP 8637 |
| ST0181 | STEEL COMP 8637H |
| ST8640 | STEEL COMP 8640 |
| ST0140 | STEEL COMP 8640H |
| ST8642 | STEEL COMP 8642 |
| ST0141 | STEEL COMP 8642H |
| ST8645 | STEEL COMP 8645 |
| ST0142 | STEEL COMP 8645H |
| ST8650 | STEEL COMP 8650 |
| ST0143 | STEEL COMP 8650H |
| ST8655 | STEEL COMP 8655 |
| ST0144 | STEEL COMP 8655H |
| ST8660 | STEEL COMP 8660 |
| ST0145 | STEEL COMP 8660H |
| ST8720 | STEEL COMP 8720 |
| ST0146 | STEEL COMP 8720H |
| ST8740 | STEEL COMP 8740 |
| ST0147 | STEEL COMP 8740H |
| ST0244 | STEEL COMP 8822H |
| ST9255 | STEEL COMP 9255 |
| ST9260 | STEEL COMP 9260 |
| ST0245 | STEEL COMP 9260H |
| ST9310 | STEEL COMP 9310 |
| ST0149 | STEEL COMP 9310H |
| ST0246 | STEEL COMP 94B17 |
| ST0247 | STEEL COMP 94B17H |
| ST0170 | STEEL COMP 94B30 |
| ST0182 | STEEL COMP 94B30H |
| ST0198 | STEEL COMP A2 |
| ST0011 | STEEL COMP A-286 |
| ST0199 | STEEL COMP A6 |
| ST0012 | STEEL COMP AM355 |
| ST0014 | STEEL COMP B1111 |
| ST0015 | STEEL COMP B1112 |
| ST0016 | STEEL COMP B1113 |
| ST0023 | STEEL COMP D4 |
| ST0028 | STEEL COMP E4340 |
| ST0029 | STEEL COMP E4340H |
| ST0213 | STEEL COMP E51100 |
| ST0030 | STEEL COMP E52100 |
| ST0031 | STEEL COMP E9310 |
| ST0032 | STEEL COMP E9310H |
| ST0200 | STEEL COMP EV-1 |
| ST0214 | STEEL COMP EV-10 |
| ST0215 | STEEL COMP EV-11 |
| ST0197 | STEEL COMP EV-12 |
| ST0203 | STEEL COMP EV-13 |
| ST0204 | STEEL COMP EV-2 |
| ST0205 | STEEL COMP EV-3 |
| ST0206 | STEEL COMP EV-4 |
| ST0207 | STEEL COMP EV-5 |
| ST0208 | STEEL COMP EV-6 |
| ST0195 | STEEL COMP EV-7 |
| ST0196 | STEEL COMP EV-8 |
| ST0209 | STEEL COMP EV-9 |
| ST0037 | STEEL COMP F1 |
| ST0038 | STEEL COMP F2 |
| ST0043 | STEEL COMP H11 |
| ST0218 | STEEL COMP H13 |
| ST0210 | STEEL COMP HNV-1 |
| ST0174 | STEEL COMP HNV-2 |
| ST0212 | STEEL COMP HNV-3 |
| ST0216 | STEEL COMP HNV-4 |
| ST0194 | STEEL COMP HNV-5 |
| ST0211 | STEEL COMP HNV-6 |
| ST0219 | STEEL COMP M1008 |
| ST0171 | STEEL COMP M1010 |
| ST0220 | STEEL COMP M1012 |
| ST0176 | STEEL COMP M1015 |
| ST0221 | STEEL COMP M1017 |
| ST0163 | STEEL COMP M1020 |
| ST0222 | STEEL COMP M1023 |
| ST0223 | STEEL COMP M1025 |
| ST0224 | STEEL COMP M1031 |
| ST0225 | STEEL COMP M1044 |
| ST0314 | STEEL COMP M3 |
| ST0177 | STEEL COMP MB1006 |
| ST0178 | STEEL COMP MB1010 |
| ST0046 | STEEL COMP MT1010 |
| ST0047 | STEEL COMP MT1015 |
| ST0048 | STEEL COMP MT1020 |
| ST0049 | STEEL COMP MTX1015 |
| ST0050 | STEEL COMP MTX1020 |
| ST0226 | STEEL COMP NV-3 |
| ST0053 | STEEL COMP PH-13-8MO |
| ST0054 | STEEL COMP PH-15-7MO |
| ST0308 | STEEL COMP W214 |
| STB000 | STEEL CORROSION RESISTING |
| ST1099 | STEEL UNS J03002 |
| ST0594 | STEEL UNS J03008 |
| ST0644 | STEEL UNS J12522 |
| ST0567 | STEEL UNS J91150 |
| ST1169 | STEEL UNS J92600 |
| ST0623 | STEEL UNS J92650 |
| ST1179 | STEEL UNS J92803 |
| ST1004 | STEEL UNS K11564 |
| ST1001 | STEEL UNS K12220 |
| ST0566 | STEEL UNS K21590 |
| TTB000 | TITANIUM |
| TTA000 | TITANIUM ALLOY |
| TT0003 | TITANIUM ALLOY 1 |
| TT0004 | TITANIUM ALLOY 11 |
| TT0005 | TITANIUM ALLOY 5 |
| TT0006 | TITANIUM ALLOY 6 |
| TT0007 | TITANIUM ALLOY 7 |
| TT0008 | TITANIUM ALLOY 75A |
| TT0009 | TITANIUM ALLOY 8 |
| TT0001 | TITANIUM ALLOY A70 |
| TT0002 | TITANIUM ALLOY C120AV |
| TNA000 | TUNGSTEN |
| TN0001 | TUNGSTEN ALLOY 3 |
| TNB000 | TUNGSTEN CARBIDE |
| VNA000 | VANADIUM |
| ZNB000 | ZINC |
| ZNA000 | ZINC ALLOY |
| ZN0003 | ZINC ALLOY 903 |
| ZN0004 | ZINC ALLOY 925 |
| ZN0002 | ZINC ALLOY AC41A |
| ZN0001 | ZINC ALLOY AG40A |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACU | FLANGE |
| 3AEE | OVERALL |
| 3AWL | FACE |
| 3BAU | SEAT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3BAUDPNB000*;SFTT3BAUDPNB000$DPBA000*;SFTT3BAUDPNB000$$DPBA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACU | FLANGE |
| 3AEE | OVERALL |
| 3AWL | FACE |
| 3BAU | SEAT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (SF01) | Reply |
| ALB000 | ALUMINUM |
| ALA000 | ALUMINUM ALLOY |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CMA000 | CHROMATE |
| CMC000 | CHROMATE MAGNESIUM |
| CMB000 | CHROMATE ZINC |
| CRA000 | CHROMIUM |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| DCA000 | DICHROMATE |
| DCB000 | DICHROMATE POTASSIUM |
| ENA000 | ENAMEL |
| ENB000 | ENAMEL LUSTERLESS |
| ENC000 | ENAMEL SYNTHETIC LUSTERLESS |
| AUA000 | GOLD |
| LQA000 | LACQUER |
| PBA000 | LEAD |
| PBB000 | LEAD ALLOY |
| LCB000 | LUBRICANT |
| NLA000 | NICKEL |
| XXB000 | OXIDE |
| XXA000 | OXIDE FILM |
| PNA000 | PAINT |
| PNB000 | PAINT HEAT RESISTANT |
| PSA000 | PASSIVATE |
| PHA000 | PHOSPHATE |
| PCA000 | PLASTIC |
| PCAF00 | PLASTIC EPOXY FORMALDEHYDE |
| PCF000 | PLASTIC POLYAMIDE |
| PCB000 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCC000 | PLASTIC POLYVINYL CHLORIDE |
| PRA000 | PRIMER |
| RCA000 | RUBBER |
| AGA000 | SILVER |
| SNA000 | TIN |
| TTA000 | TITANIUM |
| VAA000 | VARNISH |
| VAB000 | VARNISH SYNTHETIC |
| ZNA000 | ZINC |
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACU | FLANGE |
| 3AEE | OVERALL |
| 3AWL | FACE |
| 3BAU | SEAT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
CQFMJHARDNESS RATING
A NUMERIC VALUE THAT REFLECTS THE HARDNESS OF AN ITEM WHEN USED IN CONJUNCTION WITH A HARDNESS RATING SCALE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQFM3AEEJRCA2.0*;CQFM3AEEJRCA2.0$JRCA2.0*;CQFM3AEEJRCA2.0$$JRCA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACU | FLANGE |
| 3AEE | OVERALL |
| 3AWL | FACE |
| 3BAU | SEAT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC26) | Reply |
| BH | BRINELL HULTGREN |
| BS | BRINELL STANDARD |
| BT | BRINELL TUNGSTEN CARBIDE |
| DH | DUROMETER |
| RA | ROCKWELL A |
| RB | ROCKWELL B |
| RC | ROCKWELL C |
| RD | ROCKWELL D |
| RE | ROCKWELL E |
| RQ | ROCKWELL H |
| RL | ROCKWELL L |
| RM | ROCKWELL M |
| RR | ROCKWELL R |
| RS | ROCKWELL SUPERFICIAL 15-N |
| RU | ROCKWELL SUPERFICIAL 30-N |
| RN | ROCKWELL SUPERFICIAL 45-N |
| SA | SHORE DUROMETER A |
| SD | SHORE DUROMETER D |
| SC | SHORE SCLEROSCOPE |
| VF | VICKERS OR FIRTH DIAMOND PYRAMID |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) ANG WERE ENTERED FOR MRC CQKM, YOU MUST ANSWER MRC (AJSG)
IF STYLE/REPLY CODE(s) RDL WERE ENTERED FOR MRC CQKM, YOU MUST ANSWER MRC (AJFZ)
CQKMDSEATING SURFACE SHAPE
THE PHYSICAL CONFIGURATION OF THE SURFACE OF THE SEAT.
Enter the applicable reply code from the table below
(CQKMDFLT)
| Table 1 |
| Reply Code (AP00) | Reply |
| ANG | ANGULAR |
| FLT | FLAT |
| RNG | O-RING |
| RDL | RADIAL |
AJSG*JSEAT ANGLE IN DEG
THE ANGLE OF THE END SURFACE UPON WHICH THE MATED SURFACE SEATS,EXPRESSED IN DEGREES.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJSGJB2.0*;AJSGJB2.0$$JB2.1*)
| Table 1 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJFZ*JSEAT RADIUS
THE RADIUS OF THE END SURFACE UPON WHICH THE MATED SURFACE SEATS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJFZJAB2.0*;AJFZJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABQA*JTAPER MINOR DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE SMALLEST CIRCULAR CROSS SECTION OF THE TAPERED PORTION,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABQAJAC2.0*;ABQAJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABQB*JTAPER MAJOR DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE LARGEST CIRCULAR CROSS SECTION OF THE TAPERED PORTION,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABQBJAA2.0*;ABQBJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABND*JTAPER LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE TAPERED PORTION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABNDJAB2.0*;ABNDJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJSH*DSEAL ACCOMMODATION TYPE
INDICATES THE TYPE OF SEAL ACCOMMODATION INCLUDED IN OR ON THE ITEM.
Enter the applicable reply code from the table below
(AJSHDRC)
| Table 1 |
| Reply Code (AB80) | Reply |
| BD | BEADED |
| GR | GROOVED |
| RC | RECESSED |
| SL | SLEEVE |
IF STYLE/REPLY CODE(s) BP, NP OR NT WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AASA)
IF STYLE/REPLY CODE(s) JC, JE, JF, NC, NE, NF OR NJ WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJD and AASA)
IF STYLE/REPLY CODE(s) UN WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP and AAJD and AASA)
IF STYLE/REPLY CODE(s) NS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP and AAJD and AASA) or (CQJX and CMLP and AASA)
IF STYLE/REPLY CODE(s) SM OR SS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CQQR and AASA)
THSD*DTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(THSD3AEEDNS*;THSD3AEEDNS$DSS*;THSD3AEEDNS$$DSS*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BAV | FIRST THREADED PORTION |
| 3BAW | SECOND THREADED PORTION |
| 3BAX | THIRD THREADED PORTION |
| 3BAZ | SINGLE THREADED PORTION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH06) | Reply |
| BP | BSP.TR |
| SM | ISO M |
| SS | ISO S |
| NP | NPT |
| NT | NPTF |
| UN | UN |
| NE | UNEF |
| NF | UNF |
| NC | UNIFIED NATIONAL COARSE (UNC) |
| NJ | UNIFIED NATIONAL JOINT (UNJ) |
| JF | UNIFIED NATIONAL JOINT FINE (UNJF) |
| JC | UNJC |
| JE | UNJEF |
| NS | UNS |
CQJX*JNOMINAL THREAD SIZE
A DESIGNATION THAT IS USED FOR THE PURPOSE OF GENERAL IDENTIFICATION OF THE THREAD.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQJX3BAWJA2.0*;CQJX3BAWJA2.0$JA2.0*;CQJX3BAWJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BAV | FIRST THREADED PORTION |
| 3BAW | SECOND THREADED PORTION |
| 3BAX | THIRD THREADED PORTION |
| 3BAZ | SINGLE THREADED PORTION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CMLP*ATHREAD QUANTITY PER INCH
THE NUMBER OF THREADS ON THE ITEM PER LINEAR INCH MEASURED ON A LINE PARALLEL TO THE THREAD AXIS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(CMLP3BAXAP6)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BAV | FIRST THREADED PORTION |
| 3BAW | SECOND THREADED PORTION |
| 3BAX | THIRD THREADED PORTION |
| 3BAZ | SINGLE THREADED PORTION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CQQR*BTHREAD PITCH IN MILLIMETERS
A MEASUREMENT OF DISTANCE BETWEEN CORRESPONDING POINTS ON TWO ADJACENT THREADS MEASURED PARALLEL TO THE THREAD AXIS,EXPRESSED IN MILLIMETERS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(CQQR3BAZB2.0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BAV | FIRST THREADED PORTION |
| 3BAW | SECOND THREADED PORTION |
| 3BAZ | SINGLE THREADED PORTION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AAJD*ATHREAD CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(AAJD3BAXAR5)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BAV | FIRST THREADED PORTION |
| 3BAW | SECOND THREADED PORTION |
| 3BAX | THIRD THREADED PORTION |
| 3BAZ | SINGLE THREADED PORTION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AASA*JTHREAD LENGTH
A MEASUREMENT OF THE EXTENT OF THREADS,INCLUDING INCOMPLETE THREADS,ALONG A LINE PARALLEL TO THE LONGITUDINAL AXIS.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AASA3AEEJAC2.0*;AASA3AEEJAC2.0$JAC2.0*;AASA3AEEJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BAV | FIRST THREADED PORTION |
| 3BAW | SECOND THREADED PORTION |
| 3BAX | THIRD THREADED PORTION |
| 3BAZ | SINGLE THREADED PORTION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ052*;HZRDDHAZ012$$DHAZ008*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ042 | ASBESTOS |
| HAZ008 | CADMIUM |
| HAZ012 | COPPER |
| HAZ029 | LEAD |
| HAZ052 | ZINC |
SHPN*ADOT PROPER SHIPPING NAME
THE PROPER SHIPPING NAME AS IDENTIFIED BY THE DEPARTMENT OF TRANSPORTATION (DOT) AND LISTED IN THE TITLE 49 CODE OF FEDERAL REGULATIONS (CFR), PART 172, HAZARDOUS MATERIALS TABLE.
Enter the alpha-numeric reply with a minimum of one character.
(SHPNAQ4)
DENN*ADOT IDENTIFICATION NUMBER
THE IDENTIFICATION NUMBER ASSIGNED BY THE DEPARTMENT OF TRANSPORTATION (DOT) TO EACH PROPER SHIPPING NAME. IDENTIFICATION NUMBERS PRECEDED BY THE LETTERS "UN" ARE ASSOCIATED WITH INTERNATIONAL AS WELL AS DOMESTIC TRANSPORTATION AND THOSE PRECEDED BY THE LETTERS "NA" ARE NOT RECOGNIZED FOR INTERNATIONAL TRANSPORTATION OF HAZARDOUS MATERIALS (DANGEROUS GOODS) EXCEPT TO AND FROM THE UNITED STATES AND CANADA.
Enter the alpha-numeric reply with a minimum of one character.
(DENNAI3)
WLBL*ADOT WARNING LABEL CODE
THE WARNING LABEL CODE ASSIGNED BY THE DEPARTMENT OF TRANSPORTATION (DOT) TO EACH PACKAGE OR CONTAINMENT DEVICE OFFERED FOR TRANSPORTATION OF A HAZARDOUS MATERIAL WHICH MEETS ONE OR MORE HAZARD CLASS DEFINITIONS IN ACCORDANCE WITH THE TITLE 49 CODE OF FEDERAL REGULATIONS (CFR), PART 172, HAZARDOUS MATERIALS TABLE. THIS MRC HAS BEEN DISCONTINUED WITH NO REPLACEMENT - THIS INFORMATION IS NOT CHARACTERISTIC INFORMATION, THIS INFORMATION NEEDS TO BE INPUT IN SEG G OF THE TIR.
Enter the alpha-numeric reply with a minimum of one character.
(WLBLAG6)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information