A tubular or solid item specifically designed to transmit intermittent motion from the engine poppet valve tappet to the engine poppet valve rocker arm.
ISAC Reply 3AEE added to MRC STYL.
ISAC Reply 3AET added to MRC STYL.
ISAC Reply 3AEU added to MRC STYL.
ISAC Reply 3AEV added to MRC STYL.
ISAC Reply 3HOU added to MRC STYL.
ISAC Reply 1A deleted from MRC STYL.
ISAC Reply 2AA deleted from MRC STYL.
ISAC Reply 2AB deleted from MRC STYL.
ISAC Reply 2AC deleted from MRC STYL.
ISAC Reply 1B deleted from MRC STYL.
ISAC Reply 2BA deleted from MRC STYL.
ISAC Reply 2BB deleted from MRC STYL.
ISAC Reply 2BC deleted from MRC STYL.
ISAC Reply 1C deleted from MRC STYL.
ISAC Reply 3AEE added to MRC AATE.
ISAC Reply 3AET added to MRC AATE.
ISAC Reply 3AEU added to MRC AATE.
ISAC Reply 3AEV added to MRC AATE.
ISAC Reply 3HOU added to MRC AATE.
ISAC Reply 1A deleted from MRC AATE.
ISAC Reply 2AA deleted from MRC AATE.
ISAC Reply 2AB deleted from MRC AATE.
ISAC Reply 2AC deleted from MRC AATE.
ISAC Reply 1B deleted from MRC AATE.
ISAC Reply 2BA deleted from MRC AATE.
ISAC Reply 2BB deleted from MRC AATE.
ISAC Reply 2BC deleted from MRC AATE.
ISAC Reply 1C deleted from MRC AATE.
ISAC Reply 3AEE added to MRC AAVK.
ISAC Reply 3AET added to MRC AAVK.
ISAC Reply 3AEU added to MRC AAVK.
ISAC Reply 3AEV added to MRC AAVK.
ISAC Reply 3HOU added to MRC AAVK.
ISAC Reply 1A deleted from MRC AAVK.
ISAC Reply 2AA deleted from MRC AAVK.
ISAC Reply 2AB deleted from MRC AAVK.
ISAC Reply 2AC deleted from MRC AAVK.
ISAC Reply 1B deleted from MRC AAVK.
ISAC Reply 2BA deleted from MRC AAVK.
ISAC Reply 2BB deleted from MRC AAVK.
ISAC Reply 2BC deleted from MRC AAVK.
ISAC Reply 1C deleted from MRC AAVK.
ISAC Reply 3AEE added to MRC AAZP.
ISAC Reply 3AET added to MRC AAZP.
ISAC Reply 3AEU added to MRC AAZP.
ISAC Reply 3AEV added to MRC AAZP.
ISAC Reply 3HOU added to MRC AAZP.
ISAC Reply 1A deleted from MRC AAZP.
ISAC Reply 2AA deleted from MRC AAZP.
ISAC Reply 2AB deleted from MRC AAZP.
ISAC Reply 2AC deleted from MRC AAZP.
ISAC Reply 1B deleted from MRC AAZP.
ISAC Reply 2BA deleted from MRC AAZP.
ISAC Reply 2BB deleted from MRC AAZP.
ISAC Reply 2BC deleted from MRC AAZP.
ISAC Reply 1C deleted from MRC AAZP.
ISAC Reply 3AEE added to MRC ABPA.
ISAC Reply 3AET added to MRC ABPA.
ISAC Reply 3AEU added to MRC ABPA.
ISAC Reply 3AEV added to MRC ABPA.
ISAC Reply 3HOU added to MRC ABPA.
ISAC Reply 1A deleted from MRC ABPA.
ISAC Reply 2AA deleted from MRC ABPA.
ISAC Reply 2AB deleted from MRC ABPA.
ISAC Reply 2AC deleted from MRC ABPA.
ISAC Reply 1B deleted from MRC ABPA.
ISAC Reply 2BA deleted from MRC ABPA.
ISAC Reply 2BB deleted from MRC ABPA.
ISAC Reply 2BC deleted from MRC ABPA.
ISAC Reply 1C deleted from MRC ABPA.
ISAC Reply 3AEE added to MRC ABPC.
ISAC Reply 3AET added to MRC ABPC.
ISAC Reply 3AEU added to MRC ABPC.
ISAC Reply 3AEV added to MRC ABPC.
ISAC Reply 3HOU added to MRC ABPC.
ISAC Reply 1A deleted from MRC ABPC.
ISAC Reply 2AA deleted from MRC ABPC.
ISAC Reply 2AB deleted from MRC ABPC.
ISAC Reply 2AC deleted from MRC ABPC.
ISAC Reply 1B deleted from MRC ABPC.
ISAC Reply 2BA deleted from MRC ABPC.
ISAC Reply 2BB deleted from MRC ABPC.
ISAC Reply 2BC deleted from MRC ABPC.
ISAC Reply 1C deleted from MRC ABPC.
ISAC Reply 3AEE added to MRC ABPR.
ISAC Reply 3AET added to MRC ABPR.
ISAC Reply 3AEU added to MRC ABPR.
ISAC Reply 3HOU added to MRC ABPR.
ISAC Reply 1A deleted from MRC ABPR.
ISAC Reply 2AA deleted from MRC ABPR.
ISAC Reply 2AB deleted from MRC ABPR.
ISAC Reply 2AC deleted from MRC ABPR.
ISAC Reply 1B deleted from MRC ABPR.
ISAC Reply 2BA deleted from MRC ABPR.
ISAC Reply 2BB deleted from MRC ABPR.
ISAC Reply 2BC deleted from MRC ABPR.
ISAC Reply 1C deleted from MRC ABPR.
ISAC Reply 3AEE added to MRC ABPS.
ISAC Reply 3AET added to MRC ABPS.
ISAC Reply 3AEU added to MRC ABPS.
ISAC Reply 3HOU added to MRC ABPS.
ISAC Reply 1A deleted from MRC ABPS.
ISAC Reply 2AA deleted from MRC ABPS.
ISAC Reply 2AB deleted from MRC ABPS.
ISAC Reply 2AC deleted from MRC ABPS.
ISAC Reply 1B deleted from MRC ABPS.
ISAC Reply 2BA deleted from MRC ABPS.
ISAC Reply 2BB deleted from MRC ABPS.
ISAC Reply 2BC deleted from MRC ABPS.
ISAC Reply 1C deleted from MRC ABPS.
ISAC Reply 3AEE added to MRC ABPT.
ISAC Reply 3AET added to MRC ABPT.
ISAC Reply 3AEU added to MRC ABPT.
ISAC Reply 3HOU added to MRC ABPT.
ISAC Reply 1A deleted from MRC ABPT.
ISAC Reply 2AA deleted from MRC ABPT.
ISAC Reply 2AB deleted from MRC ABPT.
ISAC Reply 2AC deleted from MRC ABPT.
ISAC Reply 1B deleted from MRC ABPT.
ISAC Reply 2BA deleted from MRC ABPT.
ISAC Reply 2BB deleted from MRC ABPT.
ISAC Reply 2BC deleted from MRC ABPT.
ISAC Reply 1C deleted from MRC ABPT.
ISAC Reply 3AEE added to MRC ABPU.
ISAC Reply 3AET added to MRC ABPU.
ISAC Reply 3AEU added to MRC ABPU.
ISAC Reply 3HOU added to MRC ABPU.
ISAC Reply 1A deleted from MRC ABPU.
ISAC Reply 2AA deleted from MRC ABPU.
ISAC Reply 2AB deleted from MRC ABPU.
ISAC Reply 2AC deleted from MRC ABPU.
ISAC Reply 1B deleted from MRC ABPU.
ISAC Reply 2BA deleted from MRC ABPU.
ISAC Reply 2BB deleted from MRC ABPU.
ISAC Reply 2BC deleted from MRC ABPU.
ISAC Reply 1C deleted from MRC ABPU.
ISAC Reply 3AEE added to MRC AXMB.
ISAC Reply 3AET added to MRC AXMB.
ISAC Reply 3AEU added to MRC AXMB.
ISAC Reply 3AEV added to MRC AXMB.
ISAC Reply 3HOU added to MRC AXMB.
ISAC Reply 1A deleted from MRC AXMB.
ISAC Reply 2AA deleted from MRC AXMB.
ISAC Reply 2AB deleted from MRC AXMB.
ISAC Reply 2AC deleted from MRC AXMB.
ISAC Reply 1B deleted from MRC AXMB.
ISAC Reply 2BA deleted from MRC AXMB.
ISAC Reply 2BB deleted from MRC AXMB.
ISAC Reply 2BC deleted from MRC AXMB.
ISAC Reply 1C deleted from MRC AXMB.
ISAC Reply 3AEE added to MRC BNKG.
ISAC Reply 3AET added to MRC BNKG.
ISAC Reply 3AEU added to MRC BNKG.
ISAC Reply 3AEV added to MRC BNKG.
ISAC Reply 3HOU added to MRC BNKG.
ISAC Reply 1A deleted from MRC BNKG.
ISAC Reply 2AA deleted from MRC BNKG.
ISAC Reply 2AB deleted from MRC BNKG.
ISAC Reply 2AC deleted from MRC BNKG.
ISAC Reply 1B deleted from MRC BNKG.
ISAC Reply 2BA deleted from MRC BNKG.
ISAC Reply 2BB deleted from MRC BNKG.
ISAC Reply 2BC deleted from MRC BNKG.
ISAC Reply 1C deleted from MRC BNKG.
ISAC Reply 3AEE added to MRC BQTD.
ISAC Reply 3AET added to MRC BQTD.
ISAC Reply 3AEU added to MRC BQTD.
ISAC Reply 3AEV added to MRC BQTD.
ISAC Reply 3HOU added to MRC BQTD.
ISAC Reply 1A deleted from MRC BQTD.
ISAC Reply 2AA deleted from MRC BQTD.
ISAC Reply 2AB deleted from MRC BQTD.
ISAC Reply 2AC deleted from MRC BQTD.
ISAC Reply 1B deleted from MRC BQTD.
ISAC Reply 2BA deleted from MRC BQTD.
ISAC Reply 2BB deleted from MRC BQTD.
ISAC Reply 2BC deleted from MRC BQTD.
ISAC Reply 1C deleted from MRC BQTD.
ISAC Reply 3AEE added to MRC BQTF.
ISAC Reply 3AET added to MRC BQTF.
ISAC Reply 3AEU added to MRC BQTF.
ISAC Reply 3AEV added to MRC BQTF.
ISAC Reply 3HOU added to MRC BQTF.
ISAC Reply 1A deleted from MRC BQTF.
ISAC Reply 2AA deleted from MRC BQTF.
ISAC Reply 2AB deleted from MRC BQTF.
ISAC Reply 2AC deleted from MRC BQTF.
ISAC Reply 1B deleted from MRC BQTF.
ISAC Reply 2BA deleted from MRC BQTF.
ISAC Reply 2BB deleted from MRC BQTF.
ISAC Reply 2BC deleted from MRC BQTF.
ISAC Reply 1C deleted from MRC BQTF.
ISAC Reply 3AEE added to MRC BQTC.
ISAC Reply 3AET added to MRC BQTC.
ISAC Reply 3AEU added to MRC BQTC.
ISAC Reply 3AEV added to MRC BQTC.
ISAC Reply 3HOU added to MRC BQTC.
ISAC Reply 1A deleted from MRC BQTC.
ISAC Reply 2AA deleted from MRC BQTC.
ISAC Reply 2AB deleted from MRC BQTC.
ISAC Reply 2AC deleted from MRC BQTC.
ISAC Reply 1B deleted from MRC BQTC.
ISAC Reply 2BA deleted from MRC BQTC.
ISAC Reply 2BB deleted from MRC BQTC.
ISAC Reply 2BC deleted from MRC BQTC.
ISAC Reply 1C deleted from MRC BQTC.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED22102*)
BQSYJEND HARDNESS RATING
A NUMERIC VALUE THAT REFLECTS THE HARDNESS OF THE END(S) WHEN USED IN CONJUNCTION WITH A HARDNESS RATING SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BQSYJRCA2.0*;BQSYJRCA2.0$$JRCA2.1*)
| Table 1 |
| Reply Code (AC26) | Reply |
| RC | ROCKWELL C |
| RS | ROCKWELL SUPERFICIAL 15-N |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BQSZDEND CASEHARDENING INDICATOR
INDICATES WHETHER OR NOT AN OBJECT WITH FERROUS ALLOY ENDS HAS BEEN SUBJECTED TO A PROCESS WHEREBY THE END OUTER PORTION IS MADE SUBSTANTIALLY HARDER THAN THE INNER PORTION.
Enter the applicable reply code from the table below
(BQSZDA)
| Table 1 |
| Reply Code (AA70) | Reply |
| A | CASEHARDENED |
| B | NOT CASEHARDENED |
ADARJBODY OUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADARJAA2.0*;ADARJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABHPJOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAC2.0*;ABHPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDST0410*;MATTDST1144$DALA000*;MATTDST1144$$DALA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| STA000 | STEEL |
| ST1010 | STEEL COMP 1010 |
| ST1018 | STEEL COMP 1018 |
| ST1035 | STEEL COMP 1035 |
| ST1040 | STEEL COMP 1040 |
| ST1144 | STEEL COMP 1144 |
| ST0410 | STEEL COMP 410 |
| STB000 | STEEL CORROSION RESISTING |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
IF STYLE/REPLY CODE(s) K1 OR K3 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BQTD and BNKG and AXMB)
IF STYLE/REPLY CODE(s) K2 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BQTD and AXMB and BNKG)
IF STYLE/REPLY CODE(s) K4 OR K7 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BQTD and AAVK and AXMB and BNKG)
IF STYLE/REPLY CODE(s) K5 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AATE and AAZP and BNKG and AXMB and BQTD)
IF STYLE/REPLY CODE(s) K6 OR K8 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABPA and ABPC and AXMB and BQTD and BNKG)
IF STYLE/REPLY CODE(s) K9 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AATE and AAZP and AAVK and ABPU and ABPS and AXMB and BNKG and ABPT and ABPR)
IF STYLE/REPLY CODE(s) K10 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BQTF and AXMB and BQTD and BNKG)
IF STYLE/REPLY CODE(s) K11 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BQTD and BNKG and BQTF)
IF STYLE/REPLY CODE(s) K12 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AATE and AAZP and BQTF and AXMB and BQTD and BNKG and AAVK)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(STYL3AEULK7*;STYL3AEULK7$LK4*;STYL3AEULK7$$LK4*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AW10093 | K1 | DOME |
| AW10102 | K10 | CONCAVE |
| AW10103 | K11 | CUP |
| AW10104 | K12 | CUP W/SHOULDER AND CHAMFER |
| AW10094 | K2 | SPHERICAL, OPTIONAL FLAT |
| AW10095 | K3 | BALL |
| AW10096 | K4 | SPHERICAL W/SHOULDER, OPTIONAL FLAT |
| AW10097 | K5 | MUSHROOM |
| AW10098 | K6 | SPHERICAL, UNDERCUT OPTIONAL FLAT |
| AW10099 | K7 | DOME W/SHOULDER, OPTIONAL FLAT |
| AW10100 | K8 | BALL, UNDERCUT, OPTIONAL FLAT |
| AW10101 | K9 | POINTED, STEPPED W/SHOULDER |
AATE*BCHAMFER ANGLE IN DEG
THE MEASUREMENT OF THE CHAMFER ANGLE,EXPRESSED IN DEGREES.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(AATE3AEUB2.0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AAVK*JSHOULDER LENGTH
THE LENGTH OF THE ENLARGED PORTION/S/ LOCATED ON THE SHANK OF THE ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAVK3AEUJAB2.0*;AAVK3AEUJAB2.0$JAB2.0*;AAVK3AEUJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AAZP*JCHAMFER LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE CHAMFER,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAZP3AETJAA2.0*;AAZP3AETJAA2.0$JAA2.0*;AAZP3AETJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABPA*JUNDERCUT DIAMETER
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABPA3AEVJAB2.0*;ABPA3AEVJAB2.0$JAB2.0*;ABPA3AEVJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABPC*JUNDERCUT WIDTH
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABPC3AEVJAB2.0*;ABPC3AEVJAB2.0$JAB2.0*;ABPC3AEVJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABPR*JFIRST STEP DIAMETER
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABPR3AEEJAC2.0*;ABPR3AEEJAC2.0$JAC2.0*;ABPR3AEEJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABPS*JFIRST STEP LENGTH
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABPS3AEEJAB2.0*;ABPS3AEEJAB2.0$JAB2.0*;ABPS3AEEJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABPT*JSECOND STEP DIAMETER
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABPT3AEUJAB2.0*;ABPT3AEUJAB2.0$JAB2.0*;ABPT3AEUJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABPU*JSECOND STEP LENGTH
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABPU3AETJAB2.0*;ABPU3AETJAB2.0$JAB2.0*;ABPU3AETJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AXMB*JEND LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE END,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AXMB3AEVJAA2.0*;AXMB3AEVJAA2.0$JAA2.0*;AXMB3AEVJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BNKG*JEND LARGEST DIAMETER
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BNKG3AEVJAC2.0*;BNKG3AEVJAC2.0$JAC2.0*;BNKG3AEVJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BQTD*JEND SPHERICAL RADIUS
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BQTD3AEVJAA2.0*;BQTD3AEVJAA2.0$JAA2.0*;BQTD3AEVJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BQTF*JSPHERICAL RADIUS DEPTH
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BQTF3AEVJAC2.0*;BQTF3AEVJAC2.0$JAC2.0*;BQTF3AEVJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BQTC*JFLAT DIAMETER
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BQTC3AETJAB2.0*;BQTC3AETJAB2.0$JAB2.0*;BQTC3AETJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJGEDBODY TYPE
INDICATES THE TYPE OF BODY PROVIDED.
Enter the applicable reply code from the table below
(AJGEDRB)
| Table 1 |
| Reply Code (AE98) | Reply |
| AW | SOLID |
| RB | TUBULAR |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCF2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CF | CUBIC FEET |
| CM | CUBIC METERS |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information