An item made of duck, coated cloth, or similar flexible material with loops and/or pockets for retaining tools and accessories. It does not contain the tools or accessories.
ISAC Reply 3AEE added to MRC BYKY.
ISAC Reply 3HMJ added to MRC BYKY.
ISAC Reply 3HMK added to MRC BYKY.
ISAC Reply 3HML added to MRC BYKY.
ISAC Reply 3HMM added to MRC BYKY.
ISAC Reply 3HMN added to MRC BYKY.
ISAC Reply 3HMO added to MRC BYKY.
ISAC Reply 3HMP added to MRC BYKY.
ISAC Reply 3HMQ added to MRC BYKY.
ISAC Reply 3HMR added to MRC BYKY.
ISAC Reply 3HMS added to MRC BYKY.
ISAC Reply 3HMT added to MRC BYKY.
ISAC Reply 3HMU added to MRC BYKY.
ISAC Reply 3HMV added to MRC BYKY.
ISAC Reply 3HMW added to MRC BYKY.
ISAC Reply 3HMX added to MRC BYKY.
ISAC Reply 3HMY added to MRC BYKY.
ISAC Reply 3HMZ added to MRC BYKY.
ISAC Reply 3HNA added to MRC BYKY.
ISAC Reply 3HNB added to MRC BYKY.
ISAC Reply 3HNC added to MRC BYKY.
ISAC Reply 3HND added to MRC BYKY.
ISAC Reply 3HNE added to MRC BYKY.
ISAC Reply 3HNF added to MRC BYKY.
ISAC Reply 3HNG added to MRC BYKY.
ISAC Reply 3HNH added to MRC BYKY.
ISAC Reply 3HNI added to MRC BYKY.
ISAC Reply 3HNJ added to MRC BYKY.
ISAC Reply 3HNK added to MRC BYKY.
ISAC Reply 3HNL added to MRC BYKY.
ISAC Reply 3HNM added to MRC BYKY.
ISAC Reply 3HNN added to MRC BYKY.
ISAC Reply 3HNO added to MRC BYKY.
ISAC Reply 3HNP added to MRC BYKY.
ISAC Reply 3HNQ added to MRC BYKY.
ISAC Reply 3HNR added to MRC BYKY.
ISAC Reply 3HNS added to MRC BYKY.
ISAC Reply 3HNT added to MRC BYKY.
ISAC Reply 3HNU added to MRC BYKY.
ISAC Reply 3HNV added to MRC BYKY.
ISAC Reply 3HNW added to MRC BYKY.
ISAC Reply 3HNX added to MRC BYKY.
ISAC Reply 3HNY added to MRC BYKY.
ISAC Reply 3HNZ added to MRC BYKY.
ISAC Reply 3HOA added to MRC BYKY.
ISAC Reply 3HOB added to MRC BYKY.
ISAC Reply 3HOC added to MRC BYKY.
ISAC Reply 3HOU added to MRC BYKY.
ISAC Reply 2AA deleted from MRC BYKY.
ISAC Reply 2AB deleted from MRC BYKY.
ISAC Reply 2AC deleted from MRC BYKY.
ISAC Reply 2AD deleted from MRC BYKY.
ISAC Reply 2AE deleted from MRC BYKY.
ISAC Reply 2AF deleted from MRC BYKY.
ISAC Reply 2AG deleted from MRC BYKY.
ISAC Reply 2AH deleted from MRC BYKY.
ISAC Reply 2AJ deleted from MRC BYKY.
ISAC Reply 2AK deleted from MRC BYKY.
ISAC Reply 2AL deleted from MRC BYKY.
ISAC Reply 2AM deleted from MRC BYKY.
ISAC Reply 2AN deleted from MRC BYKY.
ISAC Reply 2AP deleted from MRC BYKY.
ISAC Reply 2AQ deleted from MRC BYKY.
ISAC Reply 2AR deleted from MRC BYKY.
ISAC Reply 2AS deleted from MRC BYKY.
ISAC Reply 2AT deleted from MRC BYKY.
ISAC Reply 2AU deleted from MRC BYKY.
ISAC Reply 2AV deleted from MRC BYKY.
ISAC Reply 2AW deleted from MRC BYKY.
ISAC Reply 2AX deleted from MRC BYKY.
ISAC Reply 2AY deleted from MRC BYKY.
ISAC Reply 2AZ deleted from MRC BYKY.
ISAC Reply 2BA deleted from MRC BYKY.
ISAC Reply 2BB deleted from MRC BYKY.
ISAC Reply 2BC deleted from MRC BYKY.
ISAC Reply 2BD deleted from MRC BYKY.
ISAC Reply 2BE deleted from MRC BYKY.
ISAC Reply 2BF deleted from MRC BYKY.
ISAC Reply 2BG deleted from MRC BYKY.
ISAC Reply 2BH deleted from MRC BYKY.
ISAC Reply 2BJ deleted from MRC BYKY.
ISAC Reply 2BK deleted from MRC BYKY.
ISAC Reply 2BL deleted from MRC BYKY.
ISAC Reply 2BM deleted from MRC BYKY.
ISAC Reply 2BN deleted from MRC BYKY.
ISAC Reply 2BP deleted from MRC BYKY.
ISAC Reply 2BQ deleted from MRC BYKY.
ISAC Reply 2BR deleted from MRC BYKY.
ISAC Reply 2BS deleted from MRC BYKY.
ISAC Reply 2BT deleted from MRC BYKY.
ISAC Reply 2BU deleted from MRC BYKY.
ISAC Reply 2BV deleted from MRC BYKY.
ISAC Reply 2BW deleted from MRC BYKY.
ISAC Reply 2BX deleted from MRC BYKY.
ISAC Reply 3AEE added to MRC BYKZ.
ISAC Reply 3HMJ added to MRC BYKZ.
ISAC Reply 3HMK added to MRC BYKZ.
ISAC Reply 3HML added to MRC BYKZ.
ISAC Reply 3HMM added to MRC BYKZ.
ISAC Reply 3HMN added to MRC BYKZ.
ISAC Reply 3HMO added to MRC BYKZ.
ISAC Reply 3HMP added to MRC BYKZ.
ISAC Reply 3HMQ added to MRC BYKZ.
ISAC Reply 3HMR added to MRC BYKZ.
ISAC Reply 3HMS added to MRC BYKZ.
ISAC Reply 3HMT added to MRC BYKZ.
ISAC Reply 3HMU added to MRC BYKZ.
ISAC Reply 3HMV added to MRC BYKZ.
ISAC Reply 3HMW added to MRC BYKZ.
ISAC Reply 3HMX added to MRC BYKZ.
ISAC Reply 3HMY added to MRC BYKZ.
ISAC Reply 3HMZ added to MRC BYKZ.
ISAC Reply 3HNA added to MRC BYKZ.
ISAC Reply 3HNB added to MRC BYKZ.
ISAC Reply 3HNC added to MRC BYKZ.
ISAC Reply 3HND added to MRC BYKZ.
ISAC Reply 3HNE added to MRC BYKZ.
ISAC Reply 3HNF added to MRC BYKZ.
ISAC Reply 3HNG added to MRC BYKZ.
ISAC Reply 3HNH added to MRC BYKZ.
ISAC Reply 3HNI added to MRC BYKZ.
ISAC Reply 3HNJ added to MRC BYKZ.
ISAC Reply 3HNK added to MRC BYKZ.
ISAC Reply 3HNL added to MRC BYKZ.
ISAC Reply 3HNM added to MRC BYKZ.
ISAC Reply 3HNN added to MRC BYKZ.
ISAC Reply 3HNO added to MRC BYKZ.
ISAC Reply 3HNP added to MRC BYKZ.
ISAC Reply 3HNQ added to MRC BYKZ.
ISAC Reply 3HNR added to MRC BYKZ.
ISAC Reply 3HNS added to MRC BYKZ.
ISAC Reply 3HNT added to MRC BYKZ.
ISAC Reply 3HNU added to MRC BYKZ.
ISAC Reply 3HNV added to MRC BYKZ.
ISAC Reply 3HNW added to MRC BYKZ.
ISAC Reply 3HNX added to MRC BYKZ.
ISAC Reply 3HNY added to MRC BYKZ.
ISAC Reply 3HNZ added to MRC BYKZ.
ISAC Reply 3HOA added to MRC BYKZ.
ISAC Reply 3HOB added to MRC BYKZ.
ISAC Reply 3HOC added to MRC BYKZ.
ISAC Reply 3HOU added to MRC BYKZ.
ISAC Reply 2AA deleted from MRC BYKZ.
ISAC Reply 2AB deleted from MRC BYKZ.
ISAC Reply 2AC deleted from MRC BYKZ.
ISAC Reply 2AD deleted from MRC BYKZ.
ISAC Reply 2AE deleted from MRC BYKZ.
ISAC Reply 2AF deleted from MRC BYKZ.
ISAC Reply 2AG deleted from MRC BYKZ.
ISAC Reply 2AH deleted from MRC BYKZ.
ISAC Reply 2AJ deleted from MRC BYKZ.
ISAC Reply 2AK deleted from MRC BYKZ.
ISAC Reply 2AL deleted from MRC BYKZ.
ISAC Reply 2AM deleted from MRC BYKZ.
ISAC Reply 2AN deleted from MRC BYKZ.
ISAC Reply 2AP deleted from MRC BYKZ.
ISAC Reply 2AQ deleted from MRC BYKZ.
ISAC Reply 2AR deleted from MRC BYKZ.
ISAC Reply 2AS deleted from MRC BYKZ.
ISAC Reply 2AT deleted from MRC BYKZ.
ISAC Reply 2AU deleted from MRC BYKZ.
ISAC Reply 2AV deleted from MRC BYKZ.
ISAC Reply 2AW deleted from MRC BYKZ.
ISAC Reply 2AX deleted from MRC BYKZ.
ISAC Reply 2AY deleted from MRC BYKZ.
ISAC Reply 2AZ deleted from MRC BYKZ.
ISAC Reply 2BA deleted from MRC BYKZ.
ISAC Reply 2BB deleted from MRC BYKZ.
ISAC Reply 2BC deleted from MRC BYKZ.
ISAC Reply 2BD deleted from MRC BYKZ.
ISAC Reply 2BE deleted from MRC BYKZ.
ISAC Reply 2BF deleted from MRC BYKZ.
ISAC Reply 2BG deleted from MRC BYKZ.
ISAC Reply 2BH deleted from MRC BYKZ.
ISAC Reply 2BJ deleted from MRC BYKZ.
ISAC Reply 2BK deleted from MRC BYKZ.
ISAC Reply 2BL deleted from MRC BYKZ.
ISAC Reply 2BM deleted from MRC BYKZ.
ISAC Reply 2BN deleted from MRC BYKZ.
ISAC Reply 2BP deleted from MRC BYKZ.
ISAC Reply 2BQ deleted from MRC BYKZ.
ISAC Reply 2BR deleted from MRC BYKZ.
ISAC Reply 2BS deleted from MRC BYKZ.
ISAC Reply 2BT deleted from MRC BYKZ.
ISAC Reply 2BU deleted from MRC BYKZ.
ISAC Reply 2BV deleted from MRC BYKZ.
ISAC Reply 2BW deleted from MRC BYKZ.
ISAC Reply 2BX deleted from MRC BYKZ.
ISAC Reply 3AEE added to MRC AZDA.
ISAC Reply 3HOD added to MRC AZDA.
ISAC Reply 3HOE added to MRC AZDA.
ISAC Reply 3HOF added to MRC AZDA.
ISAC Reply 3HOG added to MRC AZDA.
ISAC Reply 3HOH added to MRC AZDA.
ISAC Reply 3HOI added to MRC AZDA.
ISAC Reply 3HOJ added to MRC AZDA.
ISAC Reply 3HOK added to MRC AZDA.
ISAC Reply 3HOL added to MRC AZDA.
ISAC Reply 3HOU added to MRC AZDA.
ISAC Reply 1A deleted from MRC AZDA.
ISAC Reply 1B deleted from MRC AZDA.
ISAC Reply 1C deleted from MRC AZDA.
ISAC Reply 1D deleted from MRC AZDA.
ISAC Reply 1E deleted from MRC AZDA.
ISAC Reply 1F deleted from MRC AZDA.
ISAC Reply 1G deleted from MRC AZDA.
ISAC Reply 1H deleted from MRC AZDA.
ISAC Reply 1J deleted from MRC AZDA.
ISAC Reply 1K deleted from MRC AZDA.
ISAC Reply 1L deleted from MRC AZDA.
ISAC Reply 1M deleted from MRC AZDA.
ISAC Reply 1N deleted from MRC AZDA.
ISAC Reply 1X deleted from MRC AZDA.
ISAC Reply 3AEE added to MRC AZDB.
ISAC Reply 3HOD added to MRC AZDB.
ISAC Reply 3HOE added to MRC AZDB.
ISAC Reply 3HOF added to MRC AZDB.
ISAC Reply 3HOG added to MRC AZDB.
ISAC Reply 3HOH added to MRC AZDB.
ISAC Reply 3HOL added to MRC AZDB.
ISAC Reply 3HOU added to MRC AZDB.
ISAC Reply 1A deleted from MRC AZDB.
ISAC Reply 1B deleted from MRC AZDB.
ISAC Reply 1C deleted from MRC AZDB.
ISAC Reply 1D deleted from MRC AZDB.
ISAC Reply 1E deleted from MRC AZDB.
ISAC Reply 1F deleted from MRC AZDB.
ISAC Reply 1G deleted from MRC AZDB.
ISAC Reply 1H deleted from MRC AZDB.
ISAC Reply 1J deleted from MRC AZDB.
ISAC Reply 1K deleted from MRC AZDB.
ISAC Reply 1L deleted from MRC AZDB.
ISAC Reply 1M deleted from MRC AZDB.
ISAC Reply 1N deleted from MRC AZDB.
ISAC Reply 1X deleted from MRC AZDB.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED21716*)
ADZC*DENVIRONMENTAL PROTECTION
THE ENVIRONMENTAL ELEMENTS OR CONDITIONS THAT AN ITEM IS DESIGNED OR PROTECTED TO RESIST OR WITHSTAND SATISFACTORILY.
Enter the applicable reply code from the table below
(ADZCDACC)
| Table 1 |
| Reply Code (AA65) | Reply |
| ACC | MILDEW RESISTANT |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDMSX000)
| Table 1 |
| Reply Code (MA01) | Reply |
| FBZ000 | CANVAS |
| CCA000 | COTTON |
| PCA000 | PLASTIC |
| PCCB00 | PLASTIC NYLON |
| PCAP00 | PLASTIC VINYL |
| MSX000 | VARNISHED COTTON |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
ABHPJOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAB2.0*;ABHPJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMKJOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAA2.0*;ABMKJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDMA0000*;HUESDMS0054$DBU0026*;HUESDMS0054$$DBU0026*)
| Table 1 |
| Reply Code (AD06) | Reply |
| BE0000 | BEIGE |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BU0005 | BLUE, DARK |
| BU0026 | BLUE, LIGHT |
| MS0065 | BRONZE |
| BR0000 | BROWN |
| BR0010 | BROWN, DARK |
| BR0004 | BROWN, MEDIUM |
| MS0013 | BUFF |
| GR0044 | CHARTREUSE |
| CL0000 | CLEAR |
| GL0000 | GOLD |
| GY0006 | GRAY, BLUE |
| GY0008 | GRAY, DARK |
| GY0002 | GRAY, LIGHT |
| GY0019 | GRAY, SILVER |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0020 | GREEN, DARK |
| GR0032 | GREEN, LIGHT |
| GR0011 | GREEN, OLIVE |
| KH0000 | KHAKI |
| KH0035 | KHAKI, DARK |
| KH0036 | KHAKI, GREEN |
| KH0037 | KHAKI, LIGHT |
| BR0177 | MARENGO |
| MA0000 | MAROON |
| MA0016 | MAROON, LIGHT |
| NA0000 | NATURAL |
| LD0000 | OLIVE DRAB |
| SL0000 | SILVER |
| TA0000 | TAN |
| TA0082 | TAN, DARK |
| TA0003 | TAN, LIGHT |
| MS0054 | TAUPE |
| MS0380 | WHISKEY |
| WH0000 | WHITE |
| RE0026 | WINE |
| YE0000 | YELLOW |
IF YOU ANSWER MRC HDCL, YOU MUST ANSWER MRC (HUES)
HDCL*JCOLOR DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,MANUFACTURERS REFERENCE,OR INDEX SYSTEM AND THE CLASIFICATION DESIGNATION, USED TO IDENTIFY COLOR, COLOR SELECTION, COLOR MATCHING AND QUALITY CONTROL OF A SPECIFIC COLOR.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(HDCLJEATEXT1234*;HDCLJEATEXT1234$$JEATEXT1234*;HDCLJEATEXT1234$JEATEXT1234*;HDCL1BJEATEXT1234*;HDCL1BJEATEXT1234$$JEATEXT1234*;HDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP93) | Reply |
| M | 10TH COLOR RESPONSE |
| N | 11TH COLOR RESPONSE |
| P | 12TH COLOR RESPONSE |
| Q | 13TH COLOR RESPONSE |
| R | 14TH COLOR RESPONSE |
| S | 15TH COLOR RESPONSE |
| T | 16TH COLOR RESPONSE |
| U | 17TH COLOR RESPONSE |
| W | 18TH COLOR RESPONSE |
| X | 19TH COLOR RESPONSE |
| B | 1ST COLOR RESPONSE |
| Y | 20TH COLOR RESPONSE |
| Z | 21ST COLOR RESPONSE |
| V | 22ND COLOR RESPONSE |
| C | 2ND COLOR RESPONSE |
| D | 3RD COLOR RESPONSE |
| E | 4TH COLOR RESPONSE |
| F | 5TH COLOR RESPONSE |
| H | 6TH COLOR RESPONSE |
| J | 7TH COLOR RESPONSE |
| K | 8TH COLOR RESPONSE |
| L | 9TH COLOR RESPONSE |
| G | ALL COLOR RESPONSE |
| A | SINGLE COLOR RESPONSE |
CWZT*ACOLOR CHIP NUMBER
A NUMBER ASSIGNED TO A PARTICULAR GRADATION OF A COLOR IN ACCORDANCE WITH FEDERAL STANDARD 595 FOR PURPOSES OF READY IDENTIFICATION.
Enter the alpha-numeric reply with a minimum of one character.
(CWZTAV4)
IF YOU ANSWER MRC AJPM, YOU MUST ANSWER MRC (BYKY and BYKZ)
AJPM*APOCKET QUANTITY
THE NUMBER OF POCKETS INCLUDED IN THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AJPMA10*)
BYKY*JPOCKET HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF A POCKET,IN DISTICTION FROM DEPTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BYKY3HNHJAC2.0*;BYKY3HNHJAC2.0$JAC2.0*;BYKY3HNHJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HMJ | ALL POCKETS |
| 3HMK | FIRST POCKET |
| 3HML | SECOND POCKET |
| 3HMM | THIRD POCKET |
| 3HMN | FOURTH POCKET |
| 3HMO | FIFTH POCKET |
| 3HMP | SIXTH POCKET |
| 3HMQ | SEVENTH POCKET |
| 3HMR | EIGHTH POCKET |
| 3HMS | NINTH POCKET |
| 3HMT | TENTH POCKET |
| 3HMU | ELEVENTH POCKET |
| 3HMV | TWELFTH POCKET |
| 3HMW | THIRTEENTH POCKET |
| 3HMX | FOURTEENTH POCKET |
| 3HMY | FIFTEENTH POCKET |
| 3HMZ | SIXTEENTH POCKET |
| 3HNA | SEVENTEENTH POCKET |
| 3HNB | EIGHTEENTH POCKET |
| 3HNC | NINETEENTH POCKET |
| 3HND | TWENTIETH POCKET |
| 3HNE | TWENTY-FIRST POCKET |
| 3HNF | TWENTY-SECOND POCKET |
| 3HNG | TWENTY-THIRD POCKET |
| 3HNH | TWENTY-FOURTH POCKET |
| 3HNI | TWENTY-FIFTH POCKET |
| 3HNJ | TWENTY-SIXTH POCKET |
| 3HNK | TWENTY-SEVENTH POCKET |
| 3HNL | TWENTY-EIGHTH POCKET |
| 3HNM | TWENTY-NINTH POCKET |
| 3HNN | THIRTIETH POCKET |
| 3HNO | THIRTY-FIRST POCKET |
| 3HNP | THIRTY-SECOND POCKET |
| 3HNQ | THIRTY-THIRD POCKET |
| 3HNR | THIRTY-FOURTH POCKET |
| 3HNS | THIRTY-FIFTH POCKET |
| 3HNT | THIRTY-SIXTH POCKET |
| 3HNU | THIRTY-SEVENTH POCKET |
| 3HNV | THIRTY-EIGHTH POCKET |
| 3HNW | THIRTY-NINTH POCKET |
| 3HNX | FORTIETH POCKET |
| 3HNY | FORTY-FIRST POCKET |
| 3HNZ | FORTY-SECOND POCKET |
| 3HOA | FORTY-THIRD POCKET |
| 3HOB | FORTY-FOURTH POCKET |
| 3HOC | FORTY-FIFTH POCKET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BYKZ*JPOCKET WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF A POCKET,IN DISTINCTION FROM THICKNESS.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BYKZ3HMQJAA2.0*;BYKZ3HMQJAA2.0$JAA2.0*;BYKZ3HMQJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HMJ | ALL POCKETS |
| 3HMK | FIRST POCKET |
| 3HML | SECOND POCKET |
| 3HMM | THIRD POCKET |
| 3HMN | FOURTH POCKET |
| 3HMO | FIFTH POCKET |
| 3HMP | SIXTH POCKET |
| 3HMQ | SEVENTH POCKET |
| 3HMR | EIGHTH POCKET |
| 3HMS | NINTH POCKET |
| 3HMT | TENTH POCKET |
| 3HMU | ELEVENTH POCKET |
| 3HMV | TWELFTH POCKET |
| 3HMW | THIRTEENTH POCKET |
| 3HMX | FOURTEENTH POCKET |
| 3HMY | FIFTEENTH POCKET |
| 3HMZ | SIXTEENTH POCKET |
| 3HNA | SEVENTEENTH POCKET |
| 3HNB | EIGHTEENTH POCKET |
| 3HNC | NINETEENTH POCKET |
| 3HND | TWENTIETH POCKET |
| 3HNE | TWENTY-FIRST POCKET |
| 3HNF | TWENTY-SECOND POCKET |
| 3HNG | TWENTY-THIRD POCKET |
| 3HNH | TWENTY-FOURTH POCKET |
| 3HNI | TWENTY-FIFTH POCKET |
| 3HNJ | TWENTY-SIXTH POCKET |
| 3HNK | TWENTY-SEVENTH POCKET |
| 3HNL | TWENTY-EIGHTH POCKET |
| 3HNM | TWENTY-NINTH POCKET |
| 3HNN | THIRTIETH POCKET |
| 3HNO | THIRTY-FIRST POCKET |
| 3HNP | THIRTY-SECOND POCKET |
| 3HNQ | THIRTY-THIRD POCKET |
| 3HNR | THIRTY-FOURTH POCKET |
| 3HNS | THIRTY-FIFTH POCKET |
| 3HNT | THIRTY-SIXTH POCKET |
| 3HNU | THIRTY-SEVENTH POCKET |
| 3HNV | THIRTY-EIGHTH POCKET |
| 3HNW | THIRTY-NINTH POCKET |
| 3HNX | FORTIETH POCKET |
| 3HNY | FORTY-FIRST POCKET |
| 3HNZ | FORTY-SECOND POCKET |
| 3HOA | FORTY-THIRD POCKET |
| 3HOB | FORTY-FOURTH POCKET |
| 3HOC | FORTY-FIFTH POCKET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF YOU ANSWER MRC BQGX, YOU MUST ANSWER MRC (AZDA and AZDB)
BQGX*ALOOP QUANTITY
THE NUMBER OF LOOPS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BQGXA10*)
AZDA*JLOOP WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF A LOOP,IN DISTINCTION FROM THICKNESS.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AZDA3AEEJAA2.0*;AZDA3AEEJAA2.0$JAA2.0*;AZDA3AEEJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HOD | FIRST LOOP |
| 3HOE | SECOND LOOP |
| 3HOF | THIRD LOOP |
| 3HOG | FOURTH LOOP |
| 3HOH | FIFTH LOOP |
| 3HOI | SIXTH LOOP |
| 3HOJ | SEVENTH LOOP |
| 3HOK | EIGHTH LOOP |
| 3HOL | ALL LOOPS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AZDB*JLOOP LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF A LOOP,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AZDB3HOGJAC2.0*;AZDB3HOGJAC2.0$JAC2.0*;AZDB3HOGJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HOD | FIRST LOOP |
| 3HOE | SECOND LOOP |
| 3HOF | THIRD LOOP |
| 3HOG | FOURTH LOOP |
| 3HOH | FIFTH LOOP |
| 3HOL | ALL LOOPS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFPP*DCLOSURE METHOD
THE MEANS PROVIDED TO CLOSE THE OPENING OF THE ITEM.
Enter the applicable reply code from the table below
(AFPPDCH*;AFPPDCJ$DAS*;AFPPDCJ$$DAS*)
| Table 1 |
| Reply Code (AE35) | Reply |
| CH | BUCKLE |
| CN | HOOK-PILE FASTENER TAPE |
| CB | SNAP FASTENER |
| AS | STRAP |
| EE | STRAP AND BUCKLE |
| CJ | TAPE TIE |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDBVH*;CBBLDCYE$$DCYF*)
| Table 1 |
| Reply Code (AN47) | Reply |
| AHT | ADJUSTABLE LIGHT BEAM SPREAD |
| CYF | FIRE RESISTANT |
| CZC | FUNGUS RESISTANT |
| BVH | MILDEW RESISTANT |
| CYE | MOISTURE RESISTANT |
| FEZ | NONMAGNETIC CONSTRUCTION MATERIAL |
| BBY | POCKET FLAP |
| CPB | WATER REPELLENT |
| FGX | WEATHER RESISTANT |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAA7)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAT6)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information