An electronic device which supplies keying pulses for radio frequency energy beacon equipment in accordance with a predetermined combination of signals. See also KEYER and MODULATOR (as modified). Excludes:CODER, AUDIO FREQUENCY.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED19682*)
BHSXDCIRCUIT CONSTRUCTION TYPE
INDICATES THE TYPE OF CIRCUIT CONSTRUCTION PROVIDED IN THE ITEM.
Enter the applicable reply code from the table below
(BHSXDAA*;BHSXDAF$$DAW*)
| Table 1 |
| Reply Code (AM43) | Reply |
| AA | ELECTROMECHANICAL |
| AW | ELECTRON TUBE |
| AF | SOLID STATE |
BHTB*JFREQUENCY PER CHANNEL
THE PORTION OF THE FREQUENCY SPECTRUM AT WHICH AN ITEM IS DESIGNED TO RECEIVE OR TRANSMIT SIGNAL POWER.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BHTBJECABG2.0*;BHTBJECABG2.0$$JECABG2.1*)
| Table 1 |
| Reply Code (AC32) | Reply |
| G | GIGAHERTZ |
| E | HERTZ |
| K | KILOHERTZ |
| M | MEGAHERTZ |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 3 |
| Reply Code (AN18) | Reply |
| AAX | 10TH INPUT CHANNEL |
| ABC | 10TH OUTPUT CHANNEL |
| AAY | 11TH INPUT CHANNEL |
| AAZ | 12TH INPUT CHANNEL |
| ABH | 13TH INPUT CHANNEL |
| AAH | 1ST INPUT CHANNEL |
| AAC | 1ST OPERATING CHANNEL |
| AAN | 1ST OUTPUT CHANNEL |
| AAJ | 2ND INPUT CHANNEL |
| AAD | 2ND OPERATING CHANNEL |
| AAP | 2ND OUTPUT CHANNEL |
| AAK | 3RD INPUT CHANNEL |
| AAE | 3RD OPERATING CHANNEL |
| AAQ | 3RD OUTPUT CHANNEL |
| AAL | 4TH INPUT CHANNEL |
| AAF | 4TH OPERATING CHANNEL |
| AAR | 4TH OUTPUT CHANNEL |
| AAS | 5TH INPUT CHANNEL |
| AAT | 5TH OUTPUT CHANNEL |
| AAU | 6TH INPUT CHANNEL |
| AAW | 6TH OUTPUT CHANNEL |
| AAV | 7TH INPUT CHANNEL |
| ABD | 7TH OUTPUT CHANNEL |
| ABA | 8TH INPUT CHANNEL |
| ABF | 8TH OUTPUT CHANNEL |
| ABB | 9TH INPUT CHANNEL |
| ABG | 9TH OUTPUT CHANNEL |
| AAG | INPUT CHANNEL |
| AAB | OPERATING CHANNEL |
| AAM | OUTPUT CHANNEL |
BHSY*ASWITCHING RATE PER SECOND
THE NUMBER OF SWITCHING CYCLES THAT OCCUR PER SECOND.
Enter the numeric reply with a minimum of one digit.
(BHSYA10*)
BHSZ*JFREQUENCY SHIFT
THE SHIFT OF THE FREQUENCY OF THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BHSZJG2.0*;BHSZJG2.0$$JG2.1*)
| Table 1 |
| Reply Code (AC32) | Reply |
| G | GIGAHERTZ |
| E | HERTZ |
| K | KILOHERTZ |
| M | MEGAHERTZ |
IF STYLE/REPLY CODE(s) J WERE ENTERED FOR MRC BHTD, YOU MUST ANSWER MRC (BHTF)
BHTD*DFREQUENCY ADJUSTMENT TYPE
INDICATES THE TYPE OF FREQUENCY ADJUSTMENT INCLUDED IN THE ITEM.
Enter the applicable reply code from the table below
(BHTDDJ)
| Table 1 |
| Reply Code (AD63) | Reply |
| E | CONTINUOUS |
| J | STEPPED |
BHTF*JINDIVIDUAL STEP FREQUENCY
THE FREQUENCY OF EACH STEP.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BHTFJG2.0*;BHTFJG2.0$$JG2.1*)
| Table 1 |
| Reply Code (AC32) | Reply |
| G | GIGAHERTZ |
| E | HERTZ |
| K | KILOHERTZ |
| M | MEGAHERTZ |
BHTG*BVARIATION FREQUENCY RATING IN DECIBELS
THE AMOUNT OF ALLOWABLE VARIATION RELATIVE TO A SPECIFIED FREQUENCY LEVEL,EXPRESSED IN DECIBELS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(BHTGB2.0*;BHTGB2.0$$BM2.0*)
AJVF*JPHASE SHIFT ANGLE IN DEG
THE DIFFERENCE BETWEEN THE PHASE TIME OF TWO OR MORE VOLTAGES OR CURRENTS OF THE SAME FREQUENCY,AT THE SAME INSTANT OF TIME,EXPRESSED IN DEGREES.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJVFJACB2.0*;AJVFJACB2.0$$JACB2.1*)
| Table 1 |
| Reply Code (AG04) | Reply |
| AB | INPUT TO OUTPUT |
| AC | OUTPUT TO INPUT |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFBH*AINDIVIDUAL SECTION QUANTITY
THE NUMBER OF INDIVIDUAL SECTIONS INCLUDED IN THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AFBHA10*)
BHTH*BATTENUATION IN DECIBELS
THE DECREASE IN STRENGTH OF AN ELECTRICAL IMPULSE,EXPRESSED IN DECIBELS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(BHTHB2.0*;BHTHB2.0$$BM2.0*)
BHTJ*JAVERAGE POWER RATING PER CHANNEL
THE RATED AVERAGE POWER FOR EACH CHANNEL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BHTJJWF2.0*;BHTJJWF2.0$$JWF2.1*)
| Table 1 |
| Reply Code (AC33) | Reply |
| L | KILOWATTS |
| R | MEGAWATTS |
| M | MILLIWATTS |
| W | WATTS |
| Table 2 |
| Reply Code (AC00) | Reply |
| B | INPUT |
| F | OUTPUT |
BHTK*JSIGNAL VOLTAGE RATING PER CHANNEL
THE RATED SIGNAL VOLTAGE FOR EACH CHANNEL.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BHTKJVCB2.0*;BHTKJVCB2.0$$JVCB2.1*)
| Table 1 |
| Reply Code (AB63) | Reply |
| K | KILOVOLTS |
| M | MEGAVOLTS |
| U | MICROVOLTS |
| L | MILLIVOLTS |
| V | VOLTS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 3 |
| Reply Code (AC00) | Reply |
| B | INPUT |
| F | OUTPUT |
BHTL*JOVERALL GAIN
THE INCREASE IN ENERGY FROM THE INPUT TO THE OUTPUT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BHTLJAS2.0*;BHTLJAS2.0$$JAS2.1*)
| Table 1 |
| Reply Code (AB49) | Reply |
| AA | AMPERES |
| AD | DECIBELS |
| BA | MILLIAMPERES |
| BB | MILLIVOLTS |
| AS | VOLTS |
BHTN*JIMPEDANCE RATING PER CHANNEL
THE TOTAL OPPOSITION (RESISTIVE AND REACTIVE) TO THE FLOW OF ALTERNATING CURRENT PER CHANNEL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BHTNJMLAAL2.0*;BHTNJMLAAL2.0$$JMLAAL2.1*)
| Table 1 |
| Reply Code (AE75) | Reply |
| GF | GIGOHMS |
| KR | KILOHMS |
| MR | MEGOHMS |
| MC | MICROHMS |
| ML | MILLIOHMS |
| QR | OHMS |
| Table 2 |
| Reply Code (AN18) | Reply |
| AAX | 10TH INPUT CHANNEL |
| ABC | 10TH OUTPUT CHANNEL |
| AAY | 11TH INPUT CHANNEL |
| AAZ | 12TH INPUT CHANNEL |
| ABH | 13TH INPUT CHANNEL |
| AAH | 1ST INPUT CHANNEL |
| AAC | 1ST OPERATING CHANNEL |
| AAN | 1ST OUTPUT CHANNEL |
| AAJ | 2ND INPUT CHANNEL |
| AAD | 2ND OPERATING CHANNEL |
| AAP | 2ND OUTPUT CHANNEL |
| AAK | 3RD INPUT CHANNEL |
| AAE | 3RD OPERATING CHANNEL |
| AAQ | 3RD OUTPUT CHANNEL |
| AAL | 4TH INPUT CHANNEL |
| AAF | 4TH OPERATING CHANNEL |
| AAR | 4TH OUTPUT CHANNEL |
| AAS | 5TH INPUT CHANNEL |
| AAT | 5TH OUTPUT CHANNEL |
| AAU | 6TH INPUT CHANNEL |
| AAW | 6TH OUTPUT CHANNEL |
| AAV | 7TH INPUT CHANNEL |
| ABD | 7TH OUTPUT CHANNEL |
| ABA | 8TH INPUT CHANNEL |
| ABF | 8TH OUTPUT CHANNEL |
| ABB | 9TH INPUT CHANNEL |
| ABG | 9TH OUTPUT CHANNEL |
| AAG | INPUT CHANNEL |
| AAB | OPERATING CHANNEL |
| AAM | OUTPUT CHANNEL |
BHTW*JPULSE PEAK AMPLITUDE PER CHANNEL
THE MAXIMUM ABSOLUTE PEAK VALUE OF THE PULSE PER CHANNEL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BHTWJBWABG2.0*;BHTWJBWABG2.0$$JBWABG2.1*)
| Table 1 |
| Reply Code (AB49) | Reply |
| BW | MICROVOLTS |
| BB | MILLIVOLTS |
| AS | VOLTS |
| Table 2 |
| Reply Code (AN18) | Reply |
| AAX | 10TH INPUT CHANNEL |
| ABC | 10TH OUTPUT CHANNEL |
| AAY | 11TH INPUT CHANNEL |
| AAZ | 12TH INPUT CHANNEL |
| ABH | 13TH INPUT CHANNEL |
| AAH | 1ST INPUT CHANNEL |
| AAC | 1ST OPERATING CHANNEL |
| AAN | 1ST OUTPUT CHANNEL |
| AAJ | 2ND INPUT CHANNEL |
| AAD | 2ND OPERATING CHANNEL |
| AAP | 2ND OUTPUT CHANNEL |
| AAK | 3RD INPUT CHANNEL |
| AAE | 3RD OPERATING CHANNEL |
| AAQ | 3RD OUTPUT CHANNEL |
| AAL | 4TH INPUT CHANNEL |
| AAF | 4TH OPERATING CHANNEL |
| AAR | 4TH OUTPUT CHANNEL |
| AAS | 5TH INPUT CHANNEL |
| AAT | 5TH OUTPUT CHANNEL |
| AAU | 6TH INPUT CHANNEL |
| AAW | 6TH OUTPUT CHANNEL |
| AAV | 7TH INPUT CHANNEL |
| ABD | 7TH OUTPUT CHANNEL |
| ABA | 8TH INPUT CHANNEL |
| ABF | 8TH OUTPUT CHANNEL |
| ABB | 9TH INPUT CHANNEL |
| ABG | 9TH OUTPUT CHANNEL |
| AAG | INPUT CHANNEL |
| AAB | OPERATING CHANNEL |
| AAM | OUTPUT CHANNEL |
BHTP*JPULSE DURATION PER CHANNEL
THE TIME REQUIRED FOR ONE COMPLETE PULSE PER CHANNEL.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BHTPJALAAAW2.0*;BHTPJALAAAW2.0$$JALAAAW2.1*)
| Table 1 |
| Reply Code (AB49) | Reply |
| AL | MICROSECONDS |
| BK | MILLISECONDS |
| EF | NANOSECONDS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 3 |
| Reply Code (AN18) | Reply |
| AAX | 10TH INPUT CHANNEL |
| ABC | 10TH OUTPUT CHANNEL |
| AAY | 11TH INPUT CHANNEL |
| AAZ | 12TH INPUT CHANNEL |
| ABH | 13TH INPUT CHANNEL |
| AAH | 1ST INPUT CHANNEL |
| AAC | 1ST OPERATING CHANNEL |
| AAN | 1ST OUTPUT CHANNEL |
| AAJ | 2ND INPUT CHANNEL |
| AAD | 2ND OPERATING CHANNEL |
| AAP | 2ND OUTPUT CHANNEL |
| AAK | 3RD INPUT CHANNEL |
| AAE | 3RD OPERATING CHANNEL |
| AAQ | 3RD OUTPUT CHANNEL |
| AAL | 4TH INPUT CHANNEL |
| AAF | 4TH OPERATING CHANNEL |
| AAR | 4TH OUTPUT CHANNEL |
| AAS | 5TH INPUT CHANNEL |
| AAT | 5TH OUTPUT CHANNEL |
| AAU | 6TH INPUT CHANNEL |
| AAW | 6TH OUTPUT CHANNEL |
| AAV | 7TH INPUT CHANNEL |
| ABD | 7TH OUTPUT CHANNEL |
| ABA | 8TH INPUT CHANNEL |
| ABF | 8TH OUTPUT CHANNEL |
| ABB | 9TH INPUT CHANNEL |
| ABG | 9TH OUTPUT CHANNEL |
| AAG | INPUT CHANNEL |
| AAB | OPERATING CHANNEL |
| AAM | OUTPUT CHANNEL |
BHTQ*JPULSE RISE TIME PER CHANNEL
THE LENGTH OF TIME IT TAKES THE PULSE TO RISE PER CHANNEL.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BHTQJALAAAC2.0*;BHTQJALAAAC2.0$$JALAAAC2.1*)
| Table 1 |
| Reply Code (AB49) | Reply |
| AL | MICROSECONDS |
| BK | MILLISECONDS |
| EF | NANOSECONDS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 3 |
| Reply Code (AN18) | Reply |
| AAX | 10TH INPUT CHANNEL |
| ABC | 10TH OUTPUT CHANNEL |
| AAY | 11TH INPUT CHANNEL |
| AAZ | 12TH INPUT CHANNEL |
| ABH | 13TH INPUT CHANNEL |
| AAH | 1ST INPUT CHANNEL |
| AAC | 1ST OPERATING CHANNEL |
| AAN | 1ST OUTPUT CHANNEL |
| AAJ | 2ND INPUT CHANNEL |
| AAD | 2ND OPERATING CHANNEL |
| AAP | 2ND OUTPUT CHANNEL |
| AAK | 3RD INPUT CHANNEL |
| AAE | 3RD OPERATING CHANNEL |
| AAQ | 3RD OUTPUT CHANNEL |
| AAL | 4TH INPUT CHANNEL |
| AAF | 4TH OPERATING CHANNEL |
| AAR | 4TH OUTPUT CHANNEL |
| AAS | 5TH INPUT CHANNEL |
| AAT | 5TH OUTPUT CHANNEL |
| AAU | 6TH INPUT CHANNEL |
| AAW | 6TH OUTPUT CHANNEL |
| AAV | 7TH INPUT CHANNEL |
| ABD | 7TH OUTPUT CHANNEL |
| ABA | 8TH INPUT CHANNEL |
| ABF | 8TH OUTPUT CHANNEL |
| ABB | 9TH INPUT CHANNEL |
| ABG | 9TH OUTPUT CHANNEL |
| AAG | INPUT CHANNEL |
| AAB | OPERATING CHANNEL |
| AAM | OUTPUT CHANNEL |
BHTR*JPULSE DECAY TIME PER CHANNEL
THE LENGTH OF TIME IT TAKES THE TRAILING EDGE OF THE PULSE TO FALL PER CHANNEL.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BHTRJEFBAAE2.0*;BHTRJEFBAAE2.0$$JEFBAAE2.1*)
| Table 1 |
| Reply Code (AB49) | Reply |
| AL | MICROSECONDS |
| BK | MILLISECONDS |
| EF | NANOSECONDS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 3 |
| Reply Code (AN18) | Reply |
| AAX | 10TH INPUT CHANNEL |
| ABC | 10TH OUTPUT CHANNEL |
| AAY | 11TH INPUT CHANNEL |
| AAZ | 12TH INPUT CHANNEL |
| ABH | 13TH INPUT CHANNEL |
| AAH | 1ST INPUT CHANNEL |
| AAC | 1ST OPERATING CHANNEL |
| AAN | 1ST OUTPUT CHANNEL |
| AAJ | 2ND INPUT CHANNEL |
| AAD | 2ND OPERATING CHANNEL |
| AAP | 2ND OUTPUT CHANNEL |
| AAK | 3RD INPUT CHANNEL |
| AAE | 3RD OPERATING CHANNEL |
| AAQ | 3RD OUTPUT CHANNEL |
| AAL | 4TH INPUT CHANNEL |
| AAF | 4TH OPERATING CHANNEL |
| AAR | 4TH OUTPUT CHANNEL |
| AAS | 5TH INPUT CHANNEL |
| AAT | 5TH OUTPUT CHANNEL |
| AAU | 6TH INPUT CHANNEL |
| AAW | 6TH OUTPUT CHANNEL |
| AAV | 7TH INPUT CHANNEL |
| ABD | 7TH OUTPUT CHANNEL |
| ABA | 8TH INPUT CHANNEL |
| ABF | 8TH OUTPUT CHANNEL |
| ABB | 9TH INPUT CHANNEL |
| ABG | 9TH OUTPUT CHANNEL |
| AAG | INPUT CHANNEL |
| AAB | OPERATING CHANNEL |
| AAM | OUTPUT CHANNEL |
BHTS*HPOLARITY PER CHANNEL
AN ELECTRICAL CONDITION DETERMINING THE DIRECTION IN WHICH CURRENT TENDS TO FLOW PER CHANNEL.
Enter the applicable Reply Code from Tables 1 & 2 below.
(BHTSHPAAF2.0*;BHTSHPAAF2.0$$HPAAF2.1*)
| Table 1 |
| Reply Code (AK22) | Reply |
| N | NEGATIVE |
| P | POSITIVE |
| Table 2 |
| Reply Code (AN18) | Reply |
| AAX | 10TH INPUT CHANNEL |
| ABC | 10TH OUTPUT CHANNEL |
| AAY | 11TH INPUT CHANNEL |
| AAZ | 12TH INPUT CHANNEL |
| ABH | 13TH INPUT CHANNEL |
| AAH | 1ST INPUT CHANNEL |
| AAC | 1ST OPERATING CHANNEL |
| AAN | 1ST OUTPUT CHANNEL |
| AAJ | 2ND INPUT CHANNEL |
| AAD | 2ND OPERATING CHANNEL |
| AAP | 2ND OUTPUT CHANNEL |
| AAK | 3RD INPUT CHANNEL |
| AAE | 3RD OPERATING CHANNEL |
| AAQ | 3RD OUTPUT CHANNEL |
| AAL | 4TH INPUT CHANNEL |
| AAF | 4TH OPERATING CHANNEL |
| AAR | 4TH OUTPUT CHANNEL |
| AAS | 5TH INPUT CHANNEL |
| AAT | 5TH OUTPUT CHANNEL |
| AAU | 6TH INPUT CHANNEL |
| AAW | 6TH OUTPUT CHANNEL |
| AAV | 7TH INPUT CHANNEL |
| ABD | 7TH OUTPUT CHANNEL |
| ABA | 8TH INPUT CHANNEL |
| ABF | 8TH OUTPUT CHANNEL |
| ABB | 9TH INPUT CHANNEL |
| ABG | 9TH OUTPUT CHANNEL |
| AAG | INPUT CHANNEL |
| AAB | OPERATING CHANNEL |
| AAM | OUTPUT CHANNEL |
BHTT*JPULSE REPETITION RATE PER CHANNEL
THE AVERAGE RATE AT WHICH THE PULSE(S) RECURS WITHIN A SPECIFIC TIME INTERVAL PER CHANNEL.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BHTTJEGBABF2.0*;BHTTJEGBABF2.0$$JEGBABF2.1*)
| Table 1 |
| Reply Code (AB49) | Reply |
| EG | KILOPULSES PER SECOND |
| EH | MEGAPULSES PER SECOND |
| AQ | PULSES PER SECOND |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 3 |
| Reply Code (AN18) | Reply |
| AAX | 10TH INPUT CHANNEL |
| ABC | 10TH OUTPUT CHANNEL |
| AAY | 11TH INPUT CHANNEL |
| AAZ | 12TH INPUT CHANNEL |
| ABH | 13TH INPUT CHANNEL |
| AAH | 1ST INPUT CHANNEL |
| AAC | 1ST OPERATING CHANNEL |
| AAN | 1ST OUTPUT CHANNEL |
| AAJ | 2ND INPUT CHANNEL |
| AAD | 2ND OPERATING CHANNEL |
| AAP | 2ND OUTPUT CHANNEL |
| AAK | 3RD INPUT CHANNEL |
| AAE | 3RD OPERATING CHANNEL |
| AAQ | 3RD OUTPUT CHANNEL |
| AAL | 4TH INPUT CHANNEL |
| AAF | 4TH OPERATING CHANNEL |
| AAR | 4TH OUTPUT CHANNEL |
| AAS | 5TH INPUT CHANNEL |
| AAT | 5TH OUTPUT CHANNEL |
| AAU | 6TH INPUT CHANNEL |
| AAW | 6TH OUTPUT CHANNEL |
| AAV | 7TH INPUT CHANNEL |
| ABD | 7TH OUTPUT CHANNEL |
| ABA | 8TH INPUT CHANNEL |
| ABF | 8TH OUTPUT CHANNEL |
| ABB | 9TH INPUT CHANNEL |
| ABG | 9TH OUTPUT CHANNEL |
| AAG | INPUT CHANNEL |
| AAB | OPERATING CHANNEL |
| AAM | OUTPUT CHANNEL |
BHTX*JPULSE TRAIN CONTENT QUANTITY PER CHANNEL
THE NUMBER OF PULSES IN A GROUP PER CHANNEL.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(BHTXJAAE2*;BHTXJAAE2$$JAAE3*)
| Table 1 |
| Reply Code (AN18) | Reply |
| AAX | 10TH INPUT CHANNEL |
| ABC | 10TH OUTPUT CHANNEL |
| AAY | 11TH INPUT CHANNEL |
| AAZ | 12TH INPUT CHANNEL |
| ABH | 13TH INPUT CHANNEL |
| AAH | 1ST INPUT CHANNEL |
| AAC | 1ST OPERATING CHANNEL |
| AAN | 1ST OUTPUT CHANNEL |
| AAJ | 2ND INPUT CHANNEL |
| AAD | 2ND OPERATING CHANNEL |
| AAP | 2ND OUTPUT CHANNEL |
| AAK | 3RD INPUT CHANNEL |
| AAE | 3RD OPERATING CHANNEL |
| AAQ | 3RD OUTPUT CHANNEL |
| AAL | 4TH INPUT CHANNEL |
| AAF | 4TH OPERATING CHANNEL |
| AAR | 4TH OUTPUT CHANNEL |
| AAS | 5TH INPUT CHANNEL |
| AAT | 5TH OUTPUT CHANNEL |
| AAU | 6TH INPUT CHANNEL |
| AAW | 6TH OUTPUT CHANNEL |
| AAV | 7TH INPUT CHANNEL |
| ABD | 7TH OUTPUT CHANNEL |
| ABA | 8TH INPUT CHANNEL |
| ABF | 8TH OUTPUT CHANNEL |
| ABB | 9TH INPUT CHANNEL |
| ABG | 9TH OUTPUT CHANNEL |
| AAG | INPUT CHANNEL |
| AAB | OPERATING CHANNEL |
| AAM | OUTPUT CHANNEL |
BHTY*HPULSE MODULATION TYPE PER CHANNEL
INDICATES THE TYPE OF PULSE MODULATION PER CHANNEL.
Enter the applicable Reply Code from Tables 1 & 2 below.
(BHTYHBSAAN2.0*;BHTYHBSAAN2.0$$HBSAAN2.1*)
| Table 1 |
| Reply Code (AJ52) | Reply |
| BQ | AMPLITUDE |
| CP | CODE |
| CQ | DURATION |
| BS | FREQUENCY |
| CR | POSITION |
| CS | TIME |
| Table 2 |
| Reply Code (AN18) | Reply |
| AAX | 10TH INPUT CHANNEL |
| ABC | 10TH OUTPUT CHANNEL |
| AAY | 11TH INPUT CHANNEL |
| AAZ | 12TH INPUT CHANNEL |
| ABH | 13TH INPUT CHANNEL |
| AAH | 1ST INPUT CHANNEL |
| AAC | 1ST OPERATING CHANNEL |
| AAN | 1ST OUTPUT CHANNEL |
| AAJ | 2ND INPUT CHANNEL |
| AAD | 2ND OPERATING CHANNEL |
| AAP | 2ND OUTPUT CHANNEL |
| AAK | 3RD INPUT CHANNEL |
| AAE | 3RD OPERATING CHANNEL |
| AAQ | 3RD OUTPUT CHANNEL |
| AAL | 4TH INPUT CHANNEL |
| AAF | 4TH OPERATING CHANNEL |
| AAR | 4TH OUTPUT CHANNEL |
| AAS | 5TH INPUT CHANNEL |
| AAT | 5TH OUTPUT CHANNEL |
| AAU | 6TH INPUT CHANNEL |
| AAW | 6TH OUTPUT CHANNEL |
| AAV | 7TH INPUT CHANNEL |
| ABD | 7TH OUTPUT CHANNEL |
| ABA | 8TH INPUT CHANNEL |
| ABF | 8TH OUTPUT CHANNEL |
| ABB | 9TH INPUT CHANNEL |
| ABG | 9TH OUTPUT CHANNEL |
| AAG | INPUT CHANNEL |
| AAB | OPERATING CHANNEL |
| AAM | OUTPUT CHANNEL |
BHTZHSIGNAL DATA TYPE PER CHANNEL
INDICATES THE TYPE OF SIGNAL DATA PER CHANNEL.
Enter the applicable Reply Code from Tables 1 & 2 below.
(BHTZHAAVCZ2.0*;BHTZHAAVCZ2.0$$HAAVCZ2.1*)
| Table 1 |
| Reply Code (AN18) | Reply |
| AAX | 10TH INPUT CHANNEL |
| ABC | 10TH OUTPUT CHANNEL |
| AAY | 11TH INPUT CHANNEL |
| AAZ | 12TH INPUT CHANNEL |
| ABH | 13TH INPUT CHANNEL |
| AAH | 1ST INPUT CHANNEL |
| AAC | 1ST OPERATING CHANNEL |
| AAN | 1ST OUTPUT CHANNEL |
| AAJ | 2ND INPUT CHANNEL |
| AAD | 2ND OPERATING CHANNEL |
| AAP | 2ND OUTPUT CHANNEL |
| AAK | 3RD INPUT CHANNEL |
| AAE | 3RD OPERATING CHANNEL |
| AAQ | 3RD OUTPUT CHANNEL |
| AAL | 4TH INPUT CHANNEL |
| AAF | 4TH OPERATING CHANNEL |
| AAR | 4TH OUTPUT CHANNEL |
| AAS | 5TH INPUT CHANNEL |
| AAT | 5TH OUTPUT CHANNEL |
| AAU | 6TH INPUT CHANNEL |
| AAW | 6TH OUTPUT CHANNEL |
| AAV | 7TH INPUT CHANNEL |
| ABD | 7TH OUTPUT CHANNEL |
| ABA | 8TH INPUT CHANNEL |
| ABF | 8TH OUTPUT CHANNEL |
| ABB | 9TH INPUT CHANNEL |
| ABG | 9TH OUTPUT CHANNEL |
| AAG | INPUT CHANNEL |
| AAB | OPERATING CHANNEL |
| AAM | OUTPUT CHANNEL |
| Table 2 |
| Reply Code (AJ52) | Reply |
| CT | ANALOG VOLTAGE |
| CW | AUDIO FREQUENCY |
| CX | AZIMUTH |
| CY | DIGITAL |
| CZ | DISCRETE CURRENT |
| DA | DISCRETE VOLTAGE |
| DB | ELEVATION |
| DC | ERROR |
| DD | INTERRUPTED TRANSMISSION |
| DE | PROPORTIONAL |
| AW | PULSE |
| DG | PULSE DELAY |
| DH | PULSE MODULATION |
| DF | PULSE, AMPLITUDE |
| DK | RADIO FREQUENCY |
| DJ | RANGE |
| DL | RESOLVER |
| EQ | SELF-TEST |
| DM | SERVO |
| DN | SWEEP |
| DP | SYNCHRO |
| CS | TIME |
| BE | VIDEO |
ALBM*DOPERATING CONTROL METHOD
THE MEANS BY WHICH THE ITEM IS OPERATED OR CONTROLLED.
Enter the applicable reply code from the table below
(ALBMDAB*;ALBMDAF$DAB*)
| Table 1 |
| Reply Code (AH20) | Reply |
| AB | AUTOMATIC |
| AF | MANUAL |
AQZF*DCONTROL TYPE
INDICATES THE TYPE OF CONTROL.
Enter the applicable reply code from the table below
(AQZFDAAY*;AQZFDACK$DAAY*)
| Table 1 |
| Reply Code (AL37) | Reply |
| ACK | LOCAL |
| AAY | REMOTE |
BJBL*JINDICATOR DEVICE TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF INDICATOR DEVICE(S) INCLUDED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(BJBLJAKD2*;BJBLJAKD2$$JAKD3*)
| Table 1 |
| Reply Code (AJ12) | Reply |
| AKB | AUDIBLE ALARM |
| ADS | CATHODE RAY TUBE |
| AKK | HEADSET |
| ACE | LIGHT |
| AKD | LOUDSPEAKER |
| ACJ | METER |
BJBM*BMAXIMUM CONTINUOUS OPERATING TIME IN HOURS
THE MAXIMUM TIME AN ITEM WILL CONTINUOUSLY RUN,EXPRESSED IN HOURS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(BJBMB2.0)
IF STYLE/REPLY CODE(s) A OR B WERE ENTERED FOR MRC AFSU, YOU MUST ANSWER MRC (AFHH)
AFSUDAVERAGE LIFE MEASUREMENT
A TERM USED TO DENOTE THE SPECIFIC MEASUREMENT OF DURATION USED TO INDICATE THE AVERAGE LIFE OF THE ITEM.
Enter the applicable reply code from the table below
(AFSUDA)
| Table 1 |
| Reply Code (AE52) | Reply |
| B | HOURS |
| C | INDEFINITE |
| N | NOT RATED |
| A | YEARS |
AFHH*BAVERAGE LIFE RATING
THE NUMERIC VALUE OF THE LIFE EXPECTANCY OF THE ITEM.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AFHHB2.0)
AKAE*JMAXIMUM OPERATING ALTITUDE RATING
THE MAXIMUM ALTITUDE AT WHICH THE ITEM IS RATED TO FUNCTION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKAEJF2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| M | METERS |
AFGA*JOPERATING TEMP RANGE
THE MINIMUM AND MAXIMUM LIMITS OF TEMPERATURE AT WHICH THE ITEM IS RATED FOR OPERATION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFGAJCM32.0/P50.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
AECR*FVIBRATION RESISTANCE RANGE IN HERTZ
THE LOW AND HIGH FREQUENCIES OF VIBRATORY MOTION AND MECHANICAL STRESSES BETWEEN WHICH THE ITEM IS TESTED,OR OPERATED,WITHOUT DELETERIOUS EFFECT ON ITS ELECTRICAL OR MECHANICAL CHARACTERISTICS,EXPRESSED IN HERTZ.
Enter the range of numeric values with a minimum of one digit on both sides of the decimal. Separating range values with a slash and preceding negative values with an ‘M’ and positive values with a ‘P’.
(AECRFM2.0/P4.7*)
AFDN*JVIBRATION RESISTANCE AMPLITUDE
THE AMPLITUDE OF VIBRATION FOR WHICH THE VIBRATION RESISTANCE FREQUENCY RANGE APPLIES.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFDNJC2.0*;AFDNJC2.0$$JC2.1*)
| Table 1 |
| Reply Code (AD97) | Reply |
| D | CENTIMETERS TOTAL EXCURSION |
| B | GRAVITATIONAL UNITS |
| C | INCHES TOTAL EXCURSION |
AFDP*BSHOCK RESISTANCE RATING IN GRAVITATIONAL UNITS
THE MAXIMUM FORCE AT IMPACT THAT THE ITEM IS RATED TO WITHSTAND,WITHOUT RESULTING IN ANY PERMANENT CHANGE IN PHYSICAL OR ELECTRICAL CHARACTERISTICS,EXPRESSED IN GRAVITATIONAL UNITS /G'S/.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AFDPB2.0)
BJBN*JSHOCK PULSE DURATION TIME
THE LENGTH OF TIME AFTER IMPACT THAT ESTABLISHED THE CONDITION AT WHICH THE SHOCK RESISTANCE RATING APPLIES.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BJBNJBK2.0*)
| Table 1 |
| Reply Code (AB49) | Reply |
| AL | MICROSECONDS |
| BK | MILLISECONDS |
BKFB*JEXTERNAL DC OPERATING VOLTAGE IN VOLTS
THE VALUE(S) OF THE POTENTIAL SUPPLIED FROM AN EXTERIOR DIRECT CURRENT SOURCE TO OPERATE THE ITEM,EXPRESSED IN VOLTS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BKFBJAAM2.0*;BKFBJAAM2.0$$JAAM2.1*)
| Table 1 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 2 |
| Reply Code (AD88) | Reply |
| AM | 10TH VOLTAGE |
| AN | 11TH VOLTAGE |
| AP | 12TH VOLTAGE |
| AQ | 13TH VOLTAGE |
| AC | 1ST VOLTAGE |
| AD | 2ND VOLTAGE |
| AE | 3RD VOLTAGE |
| AF | 4TH VOLTAGE |
| AG | 5TH VOLTAGE |
| AH | 6TH VOLTAGE |
| AJ | 7TH VOLTAGE |
| AK | 8TH VOLTAGE |
| AL | 9TH VOLTAGE |
| AA | SINGLE VOLTAGE |
BKFC*JEXTERNAL AC OPERATING VOLTAGE IN VOLTS
THE VALUE(S) OF THE POTENTIAL SUPPLIED FROM AN EXTERIOR ALTERNATING CURRENT SOURCE TO OPERATE THE ITEM,EXPRESSED IN VOLTS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BKFCJBAG2.0*;BKFCJBAG2.0$$JBAG2.1*)
| Table 1 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 2 |
| Reply Code (AD88) | Reply |
| AM | 10TH VOLTAGE |
| AN | 11TH VOLTAGE |
| AP | 12TH VOLTAGE |
| AQ | 13TH VOLTAGE |
| AC | 1ST VOLTAGE |
| AD | 2ND VOLTAGE |
| AE | 3RD VOLTAGE |
| AF | 4TH VOLTAGE |
| AG | 5TH VOLTAGE |
| AH | 6TH VOLTAGE |
| AJ | 7TH VOLTAGE |
| AK | 8TH VOLTAGE |
| AL | 9TH VOLTAGE |
| AA | SINGLE VOLTAGE |
BJBQ*JOPERATING AC FREQUENCY IN HERTZ
THE CYCLES PER SECOND /HERTZ/ OF THE OPERATING ALTERNATING CURRENT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BJBQJBAC2.0*;BJBQJBAC2.0$$JBAC2.1*)
| Table 1 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 2 |
| Reply Code (AD88) | Reply |
| AM | 10TH VOLTAGE |
| AN | 11TH VOLTAGE |
| AP | 12TH VOLTAGE |
| AQ | 13TH VOLTAGE |
| AC | 1ST VOLTAGE |
| AD | 2ND VOLTAGE |
| AE | 3RD VOLTAGE |
| AF | 4TH VOLTAGE |
| AG | 5TH VOLTAGE |
| AH | 6TH VOLTAGE |
| AJ | 7TH VOLTAGE |
| AK | 8TH VOLTAGE |
| AL | 9TH VOLTAGE |
| AA | SINGLE VOLTAGE |
FAAZ*DPHASE
THE NUMBER OF ALTERNATING CURRENT PHASES.
Enter the applicable reply code from the table below
(FAAZDC*;FAAZDA$$DB*)
| Table 1 |
| Reply Code (AD02) | Reply |
| A | SINGLE |
| E | SINGLE/THREE |
| C | THREE |
| B | TWO |
BJBW*JCONNECTION CONTACT TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF CONTACT(S) INCLUDED IN THE CONNECTION.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit.
(BJBWJFGCW2*;BJBWJFGCW2$$JFGCW3*)
| Table 1 |
| Reply Code (AB76) | Reply |
| SM | BINDING POST |
| WK | CONNECTOR, PLUG |
| FF | DUAL PANEL JACK |
| WW | GROUND TERMINAL |
| FA | INTEGRAL CABLE W/AUDIO PLUG |
| FB | INTEGRAL CABLE W/COAXIAL PLUG |
| FC | INTEGRAL CABLE W/POWER PLUG |
| FD | INTEGRAL CORD W/POWER PLUG |
| JM | PIN |
| FM | PRESSURIZED COAXIAL PLUG |
| FN | PRESSURIZED COAXIAL SOCKET |
| FL | PRINTED CIRCUIT |
| FG | RECEPTACLE, AUDIO |
| FH | RECEPTACLE, COAXIAL |
| FJ | RECEPTACLE, POWER |
| FE | SINGLE PANEL JACK |
| PE | SOCKET |
| RN | SOLDER LUG |
| SQ | SOLDER STUD |
| BU | SURFACE MOUNT |
| FK | TERMINAL BLOCK W/SCREW |
| SS | TERMINAL LUG |
| ST | TERMINAL STUD |
| RC | WIRE LEAD TERMINALS |
| Table 2 |
| Reply Code (AG81) | Reply |
| CW | EXTERNAL |
| CT | INTERNAL |
BJBT*JMAXIMUM CONNECTION PRESSURE RATING
THE MAXIMUM RATED PRESSURE THAT A CONNECTION CAN WITHSTAND WITHOUT RUPTURE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BJBTJKST2.0*;BJBTJKST2.0$$JKST2.1*)
| Table 1 |
| Reply Code (AB18) | Reply |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| V | POUNDS PER SQUARE INCH |
| Table 2 |
| Reply Code (AB76) | Reply |
| SM | BINDING POST |
| WK | CONNECTOR, PLUG |
| FF | DUAL PANEL JACK |
| WW | GROUND TERMINAL |
| FA | INTEGRAL CABLE W/AUDIO PLUG |
| FB | INTEGRAL CABLE W/COAXIAL PLUG |
| FC | INTEGRAL CABLE W/POWER PLUG |
| FD | INTEGRAL CORD W/POWER PLUG |
| JM | PIN |
| FM | PRESSURIZED COAXIAL PLUG |
| FN | PRESSURIZED COAXIAL SOCKET |
| FL | PRINTED CIRCUIT |
| FG | RECEPTACLE, AUDIO |
| FH | RECEPTACLE, COAXIAL |
| FJ | RECEPTACLE, POWER |
| FE | SINGLE PANEL JACK |
| PE | SOCKET |
| RN | SOLDER LUG |
| SQ | SOLDER STUD |
| BU | SURFACE MOUNT |
| FK | TERMINAL BLOCK W/SCREW |
| SS | TERMINAL LUG |
| ST | TERMINAL STUD |
| RC | WIRE LEAD TERMINALS |
AKNADINCLOSURE TYPE
INDICATES THE TYPE OF INCLOSURE PROVIDED TO COAT,COVER,PROTECT,OR ENCASE THE ITEM.
Enter the applicable reply code from the table below
(AKNADAN)
| Table 1 |
| Reply Code (AG85) | Reply |
| AC | ENCAPSULATED |
| AN | ENCASED |
| AD | HERMETICALLY SEALED |
| AE | OPEN |
| AP | PARTIALLY INCLOSED |
IF STYLE/REPLY CODE(s) CB OR CH WERE ENTERED FOR MRC ADZC, YOU MUST ANSWER MRC (AKAP)
ADZC*DENVIRONMENTAL PROTECTION
THE ENVIRONMENTAL ELEMENTS OR CONDITIONS THAT AN ITEM IS DESIGNED OR PROTECTED TO RESIST OR WITHSTAND SATISFACTORILY.
Enter the applicable reply code from the table below
(ADZCDCA*;ADZCDBV$$DCM*)
| Table 1 |
| Reply Code (AA65) | Reply |
| AB | ACID RESISTANT |
| CM | DRIPTIGHT |
| GL | DUST TIGHT |
| BV | DUSTPROOF |
| CS | ELECTRICALLY INSULATED |
| AFC | ELECTROMAGNETICALLY SHIELDED |
| BW | EXPLOSION PROOF |
| GN | FUNGUS PROOF |
| CV | GENERAL PURPOSE |
| GS | MOISTURE PROOF |
| CA | OIL TIGHT |
| CH | PRESSURE PROOF |
| CB | PRESSURIZED |
| CJ | RAINTIGHT |
| GW | SALT SPRAY RESISTANT |
| HA | SHOCK RESISTANT |
| CP | SPLASH PROOF |
| CK | SUBMERSIBLE |
| CC | VIBRATION |
| BX | WATERTIGHT |
| AR | WEATHERPROOF |
AKAP*JPROOF PRESSURE
THE MAXIMUM PRESSURE THAT AN ITEM WILL WITHSTAND WITHOUT RESULTING IN ANY PERMANENT CHANGES IN ITS STRUCTURAL,MECHANICAL,OR ELECTRICAL CHARACTERISTICS. PLEASE USE MRC CQJB IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKAPJK2.0*)
| Table 1 |
| Reply Code (AB18) | Reply |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| V | POUNDS PER SQUARE INCH |
AMQYDINSTALLATION DESIGN
THE INSTALLATION FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(AMQYDAZ*;AMQYDAF$$DAD*)
| Table 1 |
| Reply Code (AJ17) | Reply |
| AW | DRAWER |
| AC | FREE-STANDING |
| CB | FREE-STANDING WITH CASTERS |
| AE | FREE-STANDING WITH LEGS |
| CC | MECHANICAL |
| AK | MOBILE |
| CD | MODULE |
| AP | PANEL |
| AF | PORTABLE |
| AZ | RACK |
| AD | TOP OF CABINET/COUNTER |
| AM | TRANSPORTABLE |
IF STYLE/REPLY CODE(s) 1 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABHP and ABKW and ABMK)
IF STYLE/REPLY CODE(s) 2 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABHP and ADAV)
AGTALBASIC SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE BASIC APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AGTAL2)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| DQ00286 | 1 | RECTANGULAR OR SQUARE |
| DQ00287 | 2 | CYLINDRICAL |
| DQ00288 | 3 | IRREGULAR |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAA2.0*;ABHPJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAC2.0*;ABKWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAA2.0*;ABMKJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAA2.0*;ADAVJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJKH*GIDENTIFICATION DESIGNATOR
A DESIGNATION ASSIGNED TO THE ITEM FOR PURPOSE OF READY IDENTIFICATION. PLEASE USE MRC BTXN IN PLACE OF THIS DISCONTINUED MRC.
Enter clear text.
(AJKHGCLEARTEXT)
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDAADS*;CBBLDAABS$$DAABT*)
| Table 1 |
| Reply Code (AN47) | Reply |
| AADS | AUTOMATIC GAIN CONTROL |
| AABT | INTERNAL BATTERY ACCOMMODATION |
| AABS | ZERO SHIFT CAPABILITY |
IF STYLE/REPLY CODE(s) P WERE ENTERED FOR MRC RADC, YOU MUST ANSWER MRC (RADD)
RADC*DRADIOACTIVE CONTENT
AN INDICATION OF WHETHER OR NOT THE ITEM CONTAINS RADIOACTIVE MATERIALS.
Enter the applicable reply code from the table below
(RADCDP)
| Table 1 |
| Reply Code (AN54) | Reply |
| P | CONTAINS RADIOACTIVE MATERIAL |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
AARG*DRELIABILITY INDICATOR
AN INDICATION THAT THE LEVEL OF PROBABILITY THAT AN ITEM WILL OPERATE WITHOUT FAILURE,AT A SPECIFIED RATED CAPABILITY,AT A SPECIFIED TEMPERATURE,AND FOR A SPECIFIED PERIOD OF TIME,HAS BEEN ESTABLISHED BY TESTING RANDOM SAMPLES OF PRODUCTION LOT.
Enter the applicable reply code from the table below
(AARGDE)
| Table 1 |
| Reply Code (AA61) | Reply |
| E | ESTABLISHED |
| N | NOT ESTABLISHED |
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
BJBR*JMAXIMUM POWER DRAIN RATING
THE MAXIMUM POWER DRAIN FOR WHICH THE ITEM IS RATED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BJBRJBZ2.0*)
| Table 1 |
| Reply Code (AB49) | Reply |
| BC | KILOWATTS |
| BZ | MILLIWATTS |
| AT | WATTS |
IF YOU ANSWER MRC HDCL, YOU MUST ANSWER MRC (HUES)
HDCL*JCOLOR DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,MANUFACTURERS REFERENCE,OR INDEX SYSTEM AND THE CLASIFICATION DESIGNATION, USED TO IDENTIFY COLOR, COLOR SELECTION, COLOR MATCHING AND QUALITY CONTROL OF A SPECIFIC COLOR.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(HDCLJEATEXT1234*;HDCLJEATEXT1234$$JEATEXT1234*;HDCLJEATEXT1234$JEATEXT1234*;HDCL1BJEATEXT1234*;HDCL1BJEATEXT1234$$JEATEXT1234*;HDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP93) | Reply |
| M | 10TH COLOR RESPONSE |
| N | 11TH COLOR RESPONSE |
| P | 12TH COLOR RESPONSE |
| Q | 13TH COLOR RESPONSE |
| R | 14TH COLOR RESPONSE |
| S | 15TH COLOR RESPONSE |
| T | 16TH COLOR RESPONSE |
| U | 17TH COLOR RESPONSE |
| W | 18TH COLOR RESPONSE |
| X | 19TH COLOR RESPONSE |
| B | 1ST COLOR RESPONSE |
| Y | 20TH COLOR RESPONSE |
| Z | 21ST COLOR RESPONSE |
| V | 22ND COLOR RESPONSE |
| C | 2ND COLOR RESPONSE |
| D | 3RD COLOR RESPONSE |
| E | 4TH COLOR RESPONSE |
| F | 5TH COLOR RESPONSE |
| H | 6TH COLOR RESPONSE |
| J | 7TH COLOR RESPONSE |
| K | 8TH COLOR RESPONSE |
| L | 9TH COLOR RESPONSE |
| G | ALL COLOR RESPONSE |
| A | SINGLE COLOR RESPONSE |
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDBL0000)
| Table 1 |
| Reply Code (AD06) | Reply |
| BL0000 | BLACK |
| GY0000 | GRAY/GREY |
| NA0000 | NATURAL |
| LD0000 | OLIVE DRAB |
ABSW*DSURFACE LUSTER
THE APPEARANCE OF THE SURFACE OF AN ITEM AS TO ITS REFLECTING QUALITIES.
Enter the applicable reply code from the table below
(ABSWDH)
| Table 1 |
| Reply Code (AB46) | Reply |
| G | HAMMERED |
| B | MATTE |
| A | MIRROR |
| H | SCRATCH GRAIN |
| J | WRINKLE |
MARK*GSPECIAL MARKINGS
MARKINGS INCLUDED ON AN ITEM FOR THE PURPOSE OF OFFERING INSTRUCTIONS OR WARNINGS OR TO INDICATE THE PURPOSE, FUNCTION, OR APPLICATION OF THE ITEM. EXCLUDES MANUFACTURER'S PART NUMBERS, SYMBOLS, OR THE LIKE.
Enter clear text.
(MARKGCLEARTEXT)
BBRJ*DSPECIAL HANDLING FEATURE
THE UNUSUAL OR UNIQUE CHARACTERISTIC/S/ OR QUALITY/IES/ OF AN ITEM WHICH NECESSITATES THE ESTABLISHMENT OF A REQUIREMENT FOR SPECIAL HANDLING.
Enter the applicable reply code from the table below
(BBRJDAD)
| Table 1 |
| Reply Code (AM83) | Reply |
| AC | EXPLOSIVE |
| AD | FLAMMABLE |
| AE | FRAGILE |
| AK | MAGNETIC |
| AH | RADIOACTIVE |
AFJN*DFRAGILITY FACTOR
THE MEASURE OF SENSITIVITY OF THE ITEM TO BE PACKAGED. A FACTOR USED BY PACKAGING ENGINEERS IN DEVISING PROPER CUSHIONING IN A PACKAGE.
Enter the applicable reply code from the table below
(AFJNDC)
| Table 1 |
| Reply Code (AD40) | Reply |
| D | DELICATE |
| B | EXTREMELY FRAGILE |
| E | MODERATELY DELICATE |
| F | MODERATELY RUGGED |
| G | RUGGED |
| C | VERY DELICATE |
BBRG*DSTORAGE TYPE
INDICATES THE TYPE OF STORAGE SPACE REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(BBRGDAN)
| Table 1 |
| Reply Code (AM81) | Reply |
| A | ANY ACCEPTABLE |
| AC | CLOSED SHED |
| AD | CONTROLLED HUMIDITY WAREHOUSE |
| AM | DEHUMIDIFIED WAREHOUSE |
| AE | GENERAL PURPOSE WAREHOUSE |
| AN | HEATED WAREHOUSE |
| AH | OPEN SHED |
| AJ | UNHEATED WAREHOUSE |
RADD*JRADIONUCLIDES DATA
THE NAME AND AMOUNT OF THE RADIONUCLIDE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(RADDJJHAAHH2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| JF | CURIES |
| JH | MICROCURIES |
| JG | MILLICURIES |
| Table 2 |
| Reply Code (AN55) | Reply |
| AAAB | ACTINIUM (89) AC-227 |
| AAAC | ACTINIUM (89) AC-228 |
| AAAD | AMERICIUM (95) AM-241 |
| AAAE | AMERICIUM (95) AM-243 |
| AAAF | ANTIMONY (51) SB-122 |
| AAAG | ANTIMONY (51) SB-124 |
| AAAH | ANTIMONY (51) SB-125 |
| AAAJ | ARGON (18) AR-37 |
| AAAK | ARGON (18) AR-41 |
| AAAL | ARGON (18) AR-41, UNCOMPRESSED |
| AAAM | ARSENIC (33) AS-73 |
| AAAN | ARSENIC (33) AS-74 |
| AAAP | ARSENIC (33) AS-76 |
| AAAQ | ARSENIC (33) AS-77 |
| AAAR | ASTATINE (85) AT-211 |
| AAAS | BARIUM (56) BA-131 |
| AAAT | BARIUM (56) BA-133 |
| AAAW | BARIUM (56) BA-140 |
| AAAX | BERKELIUM (97) BK-249 |
| AAAY | BERYLLIUM (4) BE-7 |
| AAAZ | BISMUTH (83) BI-206 |
| AABA | BISMUTH (83) BI-207 |
| AABB | BISMUTH (83) BI-210 |
| AABC | BISMUTH (83) BI-212 |
| AABD | BROMINE (35) BR-82 |
| AABE | CADMIUM (48) CD-109 |
| AABG | CADMIUM (48) CD-115 |
| AABF | CADMIUM (48) CD-115M |
| AABH | CALCIUM (20) CA-45 |
| AABJ | CALCIUM (20) CA-47 |
| AABK | CALIFORNIUM /98/ CF-249 |
| AABL | CALIFORNIUM /98/ CF-250 |
| AABM | CALIFORNIUM /98/ CF-252 |
| AABN | CARBON (6) C-14 |
| AABP | CERIUM (58) CE-141 |
| AABQ | CERIUM (58) CE-143 |
| AABR | CERIUM (58) CE-144 |
| AABS | CESIUM (55) CS-131 |
| AABW | CESIUM (55) CS-134 |
| AABT | CESIUM (55) CS-134M |
| AABX | CESIUM (55) CS-135 |
| AABY | CESIUM (55) CS-136 |
| AABZ | CESIUM (55) CS-137 |
| AACA | CHLORINE (17) CL-36 |
| AACB | CHLORINE (17) CL-38 |
| AACC | CHROMIUM (24) CR-51 |
| AACD | COBALT (27) CO-56 |
| AACE | COBALT (27) CO-57 |
| AACG | COBALT (27) CO-58 |
| AACF | COBALT (27) CO-58M |
| AACH | COBALT (27) CO-60 |
| AACJ | COPPER (29) CU-64 |
| AACK | CURIUM (96) CM-242 |
| AACL | CURIUM (96) CM-243 |
| AACM | CURIUM (96) CM-244 |
| AACN | CURIUM (96) CM-245 |
| AACP | CURIUM (96) CM-246 |
| AACQ | DYSPROSIUM (66) DY-154 |
| AACR | DYSPROSIUM (66) DY-165 |
| AACS | DYSPROSIUM (66) DY-166 |
| AACT | ERBIUM (68) ER-169 |
| AACW | ERBIUM (68) ER-171 |
| AACX | EUROPIUM (63) EU-150 |
| AACZ | EUROPIUM (63) EU-152 |
| AACY | EUROPIUM (63) EU-152M |
| AADA | EUROPIUM (63) EU-154 |
| AADB | EUROPIUM (63) EU-155 |
| AADC | FLUORINE (9) F-18 |
| AADD | GADOLINIUM (64) GD-153 |
| AADE | GADOLINIUM (64) GD-159 |
| AADF | GALLIUM (31) GA-67 |
| AADG | GALLIUM (31) GA-72 |
| AADH | GERMANIUM (32) GE-71 |
| AADJ | GOLD (79) AU-193 |
| AADK | GOLD (79) AU-194 |
| AADL | GOLD (79) AU-195 |
| AADM | GOLD (79) AU-196 |
| AADN | GOLD (79) AU-198 |
| AADP | GOLD (79) AU-199 |
| AADQ | HAFNIUM (72) HF-181 |
| AADR | HOLMIUM (67) HO-166 |
| AADS | INDIUM (49) IN-113M |
| AADT | INDIUM (49) IN-114M |
| AADX | INDIUM (49) IN-115 |
| AADW | INDIUM (49) IN-115M |
| AADY | IODINE (53) I-124 |
| AADZ | IODINE (53) I-125 |
| AAEA | IODINE (53) I-126 |
| AAEB | IODINE (53) I-129 |
| AAEC | IODINE (53) I-131 |
| AAED | IODINE (53) I-132 |
| AAEE | IODINE (53) I-133 |
| AAEF | IODINE (53) I-134 |
| AAEG | IODINE (53) I-135 |
| AAEH | IRIDIUM (77) IR-190 |
| AAEJ | IRIDIUM (77) IR-192 |
| AAEK | IRIDIUM (77) IR-194 |
| AAEL | IRON (26) FE-55 |
| AAEM | IRON (26) FE-59 |
| AAEQ | KRYPTON (36) KR-85 |
| AAER | KRYPTON (36) KR-85, UNCOMPRESSED |
| AAEN | KRYPTON (36) KR-85M |
| AAEP | KRYPTON (36) KR-85M, UNCOMPRESSED |
| AAES | KRYPTON (36) KR-87 |
| AAET | KRYPTON (36) KR-87, UNCOMPRESSED |
| AAEW | LANTHANUM (57) LA-140 |
| AAEX | LEAD (82) PB-203 |
| AAEY | LEAD (82) PB-210 |
| AAEZ | LEAD (82) PB-212 |
| AAFA | LUTECIUM (71) LU-172 |
| AAFB | LUTECIUM (71) LU-177 |
| AAFC | MAGNESIUM (12) MG-28 |
| AAFD | MANGANESE (25) MN-52 |
| AAFE | MANGANESE (25) MN-54 |
| AAFF | MANGANESE (25) MN-56 |
| AAFH | MERCURY (80) HG-197 |
| AAFG | MERCURY (80) HG-197M |
| AAFJ | MERCURY (80) HG-203 |
| AAFK | MIXED FISSION PRODUCTS MF-P |
| AAFL | MOLYBDENUM (42) MO-99 |
| AAFM | NEODYMIUM (60) ND-147 |
| AAFN | NEODYMIUM (60) ND-149 |
| AAFP | NEPTUNIUM (93) NP-237 |
| AAFQ | NEPTUNIUM (93) NP-239 |
| AAFR | NICKEL (28) NI-56 |
| AAFS | NICKEL (28) NI-59 |
| AAFT | NICKEL (28) NI-63 |
| AAFW | NICKEL (28) NI-65 |
| AAFX | NIOBIUM (41) NB-93M |
| AAFY | NIOBIUM (41) NB-95 |
| AAFZ | NIOBIUM (41) NB-97 |
| AAGA | OSMIUM (76) OS-185 |
| AAGC | OSMIUM (76) OS-191 |
| AAGB | OSMIUM (76) OS-191M |
| AAGD | OSMIUM (76) OS-193 |
| AAGE | PALLADIUM (46) PD-103 |
| AAGF | PALLADIUM (46) PD-109 |
| AAGG | PHOSPHORUS (15) P-32 |
| AAGH | PLATINUM (78) PT-191 |
| AAGJ | PLATINUM (78) PT-193 |
| AAGK | PLATINUM (78) PT-193M |
| AAGM | PLATINUM (78) PT-197 |
| AAGL | PLATINUM (78) PT-197M |
| AAGN | PLUTONIUM (94) PU-238 |
| AAGP | PLUTONIUM (94) PU-239 |
| AAGQ | PLUTONIUM (94) PU-240 |
| AAGR | PLUTONIUM (94) PU-241 |
| AAGS | PLUTONIUM (94) PU-242 |
| AAGT | POLONIUM (84) PO-210 |
| AAGW | POTASSIUM (19) K-42 |
| AAGX | POTASSIUM (19) K-43 |
| AAGY | PRASEODYMIUM (59) PR-142 |
| AAGZ | PRASEODYMIUM (59) PR-143 |
| AAHA | PROMETHIUM (61) PM-147 |
| AAHB | PROMETHIUM (61) PM-149 |
| AAHC | PROTACTINIUM (91) PA-230 |
| AAHD | PROTACTINIUM (91) PA-231 |
| AAHE | PROTACTINIUM (91) PA-233 |
| AAHF | RADIUM (88) RA-223 |
| AAHG | RADIUM (88) RA-224 |
| AAHH | RADIUM (88) RA-226 |
| AAHJ | RADIUM (88) RA-228 |
| AAHK | RADON (86) RN-220 |
| AAHL | RADON (86) RN-222 |
| AAHM | RHENIUM (75) RE-183 |
| AAHN | RHENIUM (75) RE-186 |
| AAHP | RHENIUM (75) RE-187 |
| AAHQ | RHENIUM (75) RE-188 |
| AAHR | RHENIUM (75) RE-NATURAL |
| AAHS | RHODIUM (45) RH-103M |
| AAHT | RHODIUM (45) RH-105 |
| AAHW | RUBIDIUM (37) RB-86 |
| AAHX | RUBIDIUM (37) RB-87 |
| AAHY | RUBIDIUM (37) RB-NATURAL |
| AAJA | RUTHENIUM (44) RU-103 |
| AAJB | RUTHENIUM (44) RU-105 |
| AAJC | RUTHENIUM (44) RU-106 |
| AAHZ | RUTHENIUM (44) RU-97 |
| AAJD | SAMARIUM (62) SM-145 |
| AAJE | SAMARIUM (62) SM-147 |
| AAJF | SAMARIUM (62) SM-151 |
| AAJG | SAMARIUM (62) SM-153 |
| AAJH | SCANDIUM (21) SC-46 |
| AAJJ | SCANDIUM (21) SC-47 |
| AAJK | SCANDIUM (21) SC-48 |
| AAJL | SELENIUM (34) SE-75 |
| AAJM | SILICON (14) SI-31 |
| AAJN | SILVER (47) AG-105 |
| AAJP | SILVER (47) AG-110M |
| AAJQ | SILVER (47) AG-111 |
| AAJR | SODIUM (11) NA-22 |
| AAJS | SODIUM (11) NA-24 |
| AAJW | STRONTIUM (38) SR-85 |
| AAJT | STRONTIUM (38) SR-85M |
| AAJX | STRONTIUM (38) SR-89 |
| AAJY | STRONTIUM (38) SR-90 |
| AAJZ | STRONTIUM (38) SR-91 |
| AAKA | STRONTIUM (38) SR-92 |
| AAKB | SULPHUR (16) S-35 |
| AAKC | TANTALUM (73) TA-182 |
| AAKE | TECHNETIUM (43) TC-96 |
| AAKD | TECHNETIUM (43) TC-96M |
| AAKG | TECHNETIUM (43) TC-97 |
| AAKF | TECHNETIUM (43) TC-97M |
| AAKJ | TECHNETIUM (43) TC-99 |
| AAKH | TECHNETIUM (43) TC-99M |
| AAKK | TELLURIUM (52) TE-125M |
| AAKM | TELLURIUM (52) TE-127 |
| AAKL | TELLURIUM (52) TE-127M |
| AAKP | TELLURIUM (52) TE-129 |
| AAKN | TELLURIUM (52) TE-129M |
| AAKQ | TELLURIUM (52) TE-131M |
| AAKR | TELLURIUM (52) TE-132 |
| AAKS | TERBIUM (65) TB-160 |
| AAKT | THALLIUM (81) TL-200 |
| AAKW | THALLIUM (81) TL-201 |
| AAKX | THALLIUM (81) TL-202 |
| AAKY | THALLIUM (81) TL-204 |
| AAKZ | THORIUM (90) TH-227 |
| AALA | THORIUM (90) TH-228 |
| AALB | THORIUM (90) TH-230 |
| AALC | THORIUM (90) TH-231 |
| AALD | THORIUM (90) TH-232 |
| AALE | THORIUM (90) TH-234 |
| AALF | THORIUM (90) TH-NATURAL |
| AALG | THULIUM (69) TM-168 |
| AALH | THULIUM (69) TM-170 |
| AALJ | THULIUM (69) TM-171 |
| AALK | TIN (50) SN-113 |
| AALL | TIN (50) SN-117M |
| AALM | TIN (50) SN-121 |
| AALN | TIN (50) SN-125 |
| AALP | TRITIUM (1) H-3 |
| AALQ | TRITIUM (1) H-3 AS GAS, LUMINOUS PAINT, OR ADSORBED ON SOLID MATERIAL |
| AALR | TUNGSTEN (74) W-181 |
| AALS | TUNGSTEN (74) W-185 |
| AALT | TUNGSTEN (74) W-187 |
| AALW | URANIUM (92) U-230 |
| AALX | URANIUM (92) U-232 |
| AALY | URANIUM (92) U-233 |
| AALZ | URANIUM (92) U-234 |
| AAMA | URANIUM (92) U-235 |
| AAMB | URANIUM (92) U-236 |
| AAMC | URANIUM (92) U-238 |
| AAMF | URANIUM (92) U-DEPLETED |
| AAME | URANIUM (92) U-ENRICHED |
| AAMD | URANIUM (92) U-NATURAL |
| AAMG | VANADIUM (23) V-48 |
| AAMH | VANADIUM (23) V-49 |
| AAMJ | XENON (54) XE-125 |
| AAMK | XENON (54) XE-131M |
| AAML | XENON (54) XE-131M, UNCOMPRESSED |
| AAMM | XENON (54) XE-133 |
| AAMN | XENON (54) XE-133, UNCOMPRESSED |
| AAMP | XENON (54) XE-135 |
| AAMQ | XENON (54) XE-135, UNCOMPRESSED |
| AAMR | YTTERBIUM (70) YB-175 |
| AAMS | YTTRIUM (39) Y-88 |
| AAMT | YTTRIUM (39) Y-90 |
| AAMX | YTTRIUM (39) Y-91 |
| AAMW | YTTRIUM (39) Y-91M |
| AAMY | YTTRIUM (39) Y-92 |
| AAMZ | YTTRIUM (39) Y-93 |
| AANA | ZINC (30) ZN-65 |
| AANC | ZINC (30) ZN-69 |
| AANB | ZINC (30) ZN-69M |
| AAND | ZIRCONIUM (40) ZR-93 |
| AANE | ZIRCONIUM (40) ZR-95 |
| AANF | ZIRCONIUM (40) ZR-97 |
AFJQ*JSTORAGE TEMP RANGE
THE MINIMUM AND MAXIMUM TEMPERATURES AT WHICH AN ITEM CAN BE STORED WITHOUT DETRIMENTAL EFFECT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFJQJFM32.0/P50.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDIRA000*;PRMTDPDA000$DAZA000*;PRMTDPDA000$$DAZA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJRTA000E2.0*;PMWTJRTA000E2.0$JRTA000E2.0*;PMWTJRTA000E2.0$$JRTA000E2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJAGA0002.0*;PMLCJAGA0002.0$JAGA0002.0*;PMLCJAGA0002.0$$JAGA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAH3)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAJ7)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.
(NTRDA80-05-28*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(ZZZPJ81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ035)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ035 | RADIOACTIVE |
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
MATT*DMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AEEDALA000*;MATT3AEEDALA000$DALA000*;MATT3AEEDALA000$$DALA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ACE | INCLOSURE |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
AWLS*DCONNECTION TYPE
INDICATES THE TYPE OF CONNECTION/S/.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AWLS3AEEDAPU*;AWLS3AEEDAPU$DAQW*;AWLS3AEEDAPU$$DAQW*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HCB | REAR |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB76) | Reply |
| APU | PIN |
| ADQ | PLUG CONNECTOR |
| AQW | PRINTED CIRCUIT |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information