A CAMERA, STILL PICTURE designed for use in the graphic arts to make accurate, distortion-free copies from flat surface subject matter upon sensitized material.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED18934*)
ASZPDCAMERA TYPE
INDICATES THE TYPE OF CAMERA.
Enter the applicable reply code from the table below
(ASZPDAB*;ASZPDAW$DAY*;ASZPDAW$$DAY*)
| Table 1 |
| Reply Code (AM04) | Reply |
| AB | AIRCRAFT |
| BF | AIRCRAFT/CONTINUOUS STRIP RECONNAISSANCE |
| AC | AIRCRAFT/DAY RECONNAISSANCE |
| BG | AIRCRAFT/FRAMING RECONNAISSANCE |
| AD | AIRCRAFT/NIGHT RECONNAISSANCE |
| BH | AIRCRAFT/PANORAMIC RECONNAISSANCE |
| AE | CLINICAL RESEARCH |
| AF | COMBAT |
| BJ | COPY NONLITHOGRAPHIC |
| AG | DARKROOM |
| AH | DIFFUSION-TRANSFER PROCESSING |
| AJ | FINGERPRINT |
| AK | GALLERY |
| AL | GENERAL PURPOSE |
| AM | GUNSIGHT RECORDING |
| AN | HIGH SPEED |
| AP | IDENTIFICATION |
| AQ | INSTRUMENTATION RECORDING |
| AR | MAPPING |
| AS | MEDICAL |
| AT | MICROFILM COPY |
| AW | MICROSCOPE |
| AX | OSCILLOSCOPE |
| AY | PERISCOPE |
| EE | PORTRAIT |
| AZ | PRESS |
| BA | RADARSCOPE |
| BB | RECORDING |
| BK | SEQUENCE |
| BL | SPECIAL PURPOSE |
| BC | STRIKE RECORDING |
| BD | STUDIO |
| EF | UNDERWATER PANORAMIC |
| BE | VIEW |
ASZRDMAXIMUM REDUCTION RATIO
THE MAXIMUM RATIO BY WHICH THE ITEM MAY BE REDUCED.
Enter the applicable reply code from the table below
(ASZRDAC*;ASZRDAF$$DBF*)
| Table 1 |
| Reply Code (AM06) | Reply |
| BE | 1 TO 0.12 |
| BF | 1 TO 0.22 |
| AB | 1 TO 0.30 |
| AC | 1 TO 0.33 |
| AD | 1 TO 0.82 |
| AE | 2 TO 1 |
| AF | 3 TO 1 |
| AG | 4 TO 1 |
| AH | 5 TO 1 |
| AJ | 6 TO 1 |
| AK | 7 TO 1 |
ASZTFLENS APERTURE SETTING RANGE
THE MINIMUM AND MAXIMUM SETTING LIMITS OF THE LENS APERTURE.
Enter the range of numeric values with a minimum of one digit on both sides of the decimal. Separating range values with a slash and preceding negative values with an ‘M’ and positive values with a ‘P’.
(ASZTFM2.0/P4.7*)
ATAMDFOCUS METHOD
THE MEANS BY WHICH THE ITEM IS FOCUSED.
Enter the applicable reply code from the table below
(ATAMDAACD*;ATAMDAACB$DAACF*;ATAMDAACB$$DAACF*)
| Table 1 |
| Reply Code (AC58) | Reply |
| AABD | AUTOMATIC |
| AABR | BACK BODY TRACK |
| AABS | DUAL DRIVE |
| AABT | ELECTRIC SCREW |
| AABW | FIXED |
| AABX | FRONT BODY TRACK |
| AABY | LEAD SCREW |
| AABZ | LENS BARREL |
| AACA | LENS MOUNT |
| AAAH | LEVER |
| AACB | MANUAL CABLE |
| ACV | MICROPRISM SPOT |
| AAJQ | MONORAIL |
| AACC | MOVABLE BACK |
| AACD | NUT |
| AACE | PINION |
| AACF | RACK |
| AACG | SLIDING BED |
BKHF*JLENS FOCAL LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION FROM THE CENTER OF A LENS TO THE FOCAL PLANE,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BKHFJLB2.0*;BKHFJLB2.0$$JLB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ASZS*DMAXIMUM ENLARGEMENT RATIO
THE MAXIMUM RATIO BY WHICH THE ITEM MAY BE ENLARGED.
Enter the applicable reply code from the table below
(ASZSDBG*;ASZSDAQ$$DAW*)
| Table 1 |
| Reply Code (AM06) | Reply |
| BG | 1 TO 1.5 |
| AL | 1 TO 2.0 |
| BH | 1 TO 2.25 |
| AM | 1 TO 2.5 |
| AN | 1 TO 3.0 |
| AP | 1 TO 3.5 |
| AQ | 1 TO 4.0 |
| AR | 1 TO 4.5 |
| AS | 1 TO 5.0 |
| AT | 1 TO 5.5 |
| AW | 1 TO 6.0 |
IF STYLE/REPLY CODE(s) 1 OR 5 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABGL and HGTH and ABRY)
IF STYLE/REPLY CODE(s) 2 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABGL and HGTH and ATEM and ATEN)
IF STYLE/REPLY CODE(s) 3 OR 6 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AEJZ and ABGL and HGTH)
IF STYLE/REPLY CODE(s) 4 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABGL and HGTH and ATEP and ADAQ)
IF STYLE/REPLY CODE(s) 7 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (HGTH and ABGL and ABRY)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLL2)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAD1290 | 1 | MOTION PICTURE OR STILL PICTURE |
| AAD1291 | 2 | STILL PICTURE |
| AAD1292 | 3 | STILL PICTURE AERIAL |
| AAD1293 | 4 | CAMERA BODY, STILL PICTURE |
| AAD1294 | 5 | HORIZONTAL LITHOGRAPHIC |
| AAD1295 | 6 | VERTICAL LITHOGRAPHIC |
| AAD1296 | 7 | CAMERA BODY, MOTION PICTURE |
ABGL*JWIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGLJAC2.0*;ABGLJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABRY*JLENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRYJAB2.0*;ABRYJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAQ*JBODY LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE BODY,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAQJAC2.0*;ADAQJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEJZ*JDEPTH
A LINEAR MEASUREMENT FROM THE SURFACE TO A SPECIFIED INNER POINT ON AN ITEM,IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEJZJAB2.0*;AEJZJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ATEM*JEXTENDED LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM WHEN IT IS IN AN EXTENDED POSITION,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ATEMJAC2.0*;ATEMJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ATEN*JCONTRACTED LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM WHEN IT IS IN A CONTRACTED /COMPRESSED/ POSITION,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ATENJAA2.0*;ATENJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ATEP*JMAGAZINE THICKNESS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ATEPJAA2.0*;ATEPJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
HGTH*JHEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN OBJECT,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(HGTHJAC2.0*;HGTHJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ASZZDCAMERA MOUNTING TYPE
INDICATES THE TYPE OF MOUNT UTILIZED TO SUPPORT THE CAMERA.
Enter the applicable reply code from the table below
(ASZZDDD*;ASZZDAFJ$$DDF*)
| Table 1 |
| Reply Code (AA78) | Reply |
| CZ | AIRCRAFT |
| DA | ANTENNA |
| DB | BEZEL |
| CL | BRACKET |
| TJ | EASEL |
| DC | FIXED |
| DD | HAND HELD |
| DE | HINGED MOUNTED ADAPTER |
| DF | HOOD |
| TK | HOOD-ADAPTER, CATHODE RAY TUBE |
| DG | METAL BASE |
| AFJ | OSCILLOGRAPH |
| DH | PERISCOPE |
| DJ | PLATFORM STAND |
| FY | POD |
| DL | RADAR SCOPE |
| DM | RATCHET MOUNTING CLAMP |
| DN | SCREW |
| DP | SHOULDER |
| DQ | SPECIAL |
| HT | STAND |
| BY | TABLE |
| BQ | TRIPOD |
| DR | VERTICAL COLUMN |
ATABDFILM ACCOMMODATION TYPE
INDICATES THE TYPE OF FILM ACCOMMODATION PROVIDED.
Enter the applicable reply code from the table below
(ATABDAT*;ATABDAL$DAW*)
| Table 1 |
| Reply Code (AG37) | Reply |
| AJ | CARTRIDGE LOAD |
| AX | CASSETTE |
| AK | CUT FILM |
| AL | FILM PACK |
| DA | FLOPPY DISC |
| AM | GLASS PLATE |
| AN | MAGAZINE |
| AQ | MAGAZINE DOUBLE COMPARTMENT |
| AP | MAGAZINE LOAD |
| AR | MAGAZINE SINGLE COMPARTMENT |
| AS | ROLL FILM |
| AT | SINGLE COMPARTMENT FILM LOAD |
| AW | SPOOL FILM LOAD |
ATAJ*AFILM SIZE FOR WHICH DESIGNED
THE SIZE OF THE FILM FOR WHICH THE ITEM IS DESIGNED.
Enter the alpha-numeric reply with a minimum of one character.
(ATAJAY0)
ATAK*JFILM WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE FILM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ATAKJAB2.0*;ATAKJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ATAW*JFILM LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE FILM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ATAWJAB2.0*;ATAWJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ATBB*JNEGATIVE WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE NEGATIVE,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ATBBJAC2.0*;ATBBJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ATBC*JNEGATIVE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE NEGATIVE,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ATBCJAA2.0*;ATBCJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ATAL*AEXPOSURE QUANTITY ACCOMMODATED
THE NUMBER OF EXPOSURES THE ITEM WILL ACCOMMODATE.
Enter the numeric reply with a minimum of one digit.
(ATALA10*)
ATAP*DVIEWFINDER TYPE
INDICATES THE TYPE OF VIEWFINDER PROVIDED.
Enter the applicable reply code from the table below
(ATAPDCK*;ATAPDCM$$DBM*)
| Table 1 |
| Reply Code (AM04) | Reply |
| EG | BORESIGHT |
| BM | COLLAPSIBLE SPORT |
| BN | COUPLED SUPERIMPOSED |
| BP | DIRECT |
| BQ | EYE LEVEL |
| BR | EYE PIECE |
| BS | FOLDING OPTICAL EYE LEVEL |
| BT | GROUND GLASS BACK |
| BW | INTERNAL NEWTON |
| BY | OBLIQUE |
| BX | OBLIQUE FOLDING |
| BZ | OPEN FRAME |
| CB | OPTICAL |
| CA | OPTICAL TUBULAR |
| CC | PARALLAX CORRECTING |
| CD | PEEP-SIGHT |
| CE | PENTA PRISM |
| AY | PERISCOPE |
| CF | PROJECTION |
| CG | RANGE COUPLED |
| CH | REFLEX |
| CJ | SPLIT FIELD |
| CK | TUBULAR |
| CL | VERTICAL |
| CM | WAIST LEVEL |
| CN | WIRE FRAME |
ATASDLENS MOUNTING METHOD
THE MEANS BY WHICH THE LENS IS MOUNTED TO AN ITEM.
Enter the applicable reply code from the table below
(ATASDCK*;ATASDTJ$DCM*)
| Table 1 |
| Reply Code (AB89) | Reply |
| LF | ADAPTER |
| CK | BARREL |
| CM | BAYONET |
| TL | BOARD |
| TG | C TYPE ADJUSTABLE FOCUS |
| TF | CLAMP RING VARIABLE |
| TH | EYEMO STUD |
| AF | FLANGE |
| TJ | FOCUSING C |
| TK | FOCUSING S |
| AED | FRONT CONE ASSEMBLY |
| TM | PLATE FIXED FOCUS |
| TN | REVOLVING TURRET FOUR LENS |
| TP | REVOLVING TURRET THREE LENS |
| TQ | REVOLVING TURRET TWO LENS |
| AN | SCREW |
| DF | STUD |
IF STYLE/REPLY CODE(s) AAFY WERE ENTERED FOR MRC ATBD, YOU MUST ANSWER MRC (AKCV and ATDC)
IF STYLE/REPLY CODE(s) AACK WERE ENTERED FOR MRC ATBD, YOU MUST ANSWER MRC (AKCV and ATDX)
ATBD*DFILM ADVANCE METHOD
THE MEANS BY WHICH THE FILM IS ADVANCED.
Enter the applicable reply code from the table below
(ATBDDAAFY*;ATBDDAACJ$$DAACK*)
| Table 1 |
| Reply Code (AC58) | Reply |
| AAFY | ELECTRIC MOTOR |
| AACJ | HAND OPERATED |
| AACK | SPRING MOTOR |
AKCV*DDRIVE TYPE
INDICATES THE TYPE OF DRIVE FOR TURNING,ROTATING,OR POSITIONING THE MECHANISM.
Enter the applicable reply code from the table below
(AKCVDBX*;AKCVDBY$$DBY*)
| Table 1 |
| Reply Code (AG25) | Reply |
| BY | EXTERNAL |
| BX | INTEGRAL |
ATDX*JSPRING MOTOR CAPACITY
THE CAPACITY OF THE SPRING MOTOR.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ATDXJAB2.0*;ATDXJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) AJ WERE ENTERED FOR MRC ATDC, YOU MUST ANSWER MRC (ATDE and ATDG)
ATDC*JDRIVE MOTOR VOLTAGE RATING
THE TYPE AND AMOUNT OF VOLTAGE FOR WHICH THE DRIVE MOTOR IS DESIGNED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ATDCJAJ2.0*;ATDCJAJ2.0$$JAJ2.1*)
| Table 1 |
| Reply Code (AG13) | Reply |
| AJ | ALTERNATING CURRENT |
| AK | DIRECT CURRENT |
ATDE*BDRIVE MOTOR CURRENT FREQUENCY IN HERTZ
THE CYCLES PER SECOND (HERTZ) OF ALTERNATING CURRENT FOR WHICH THE DRIVE MOTOR IS DESIGNED.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ATDEB2.0)
ATDG*DDRIVE MOTOR PHASE
THE NUMBER OF ALTERNATING CURRENT PHASE/S/ FOR WHICH THE DRIVE MOTOR IS DESIGNED.
Enter the applicable reply code from the table below
(ATDGDA*;ATDGDB$DC*)
| Table 1 |
| Reply Code (AD02) | Reply |
| A | SINGLE |
| C | THREE |
| B | TWO |
AMQYDINSTALLATION DESIGN
THE INSTALLATION FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(AMQYDAF*;AMQYDAJ$DAK*;AMQYDAJ$$DAK*)
| Table 1 |
| Reply Code (AJ17) | Reply |
| AJ | FIXED |
| AK | MOBILE |
| AF | PORTABLE |
ATDY*HSTRUCTURAL DESIGN
THE STRUCTURAL DESIGN OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below.
(ATDYHALDV*)
| Table 1 |
| Reply Code (AH79) | Reply |
| AM | BED SUPPORTED |
| AL | OVERHEAD SUPPORTED |
| Table 2 |
| Reply Code (AA78) | Reply |
| DX | BI-RAIL |
| DS | MOUNTED ON MONORAIL |
| DW | MOUNTED ON TORQUE TUBE |
| DT | MOUNTED ON TWO TRACKS |
| DZ | MULTI-RAIL |
| DY | TRI-RAIL |
ATDKDFILM HOLDER TYPE
INDICATES THE TYPE OF FILM HOLDER PROVIDED.
Enter the applicable reply code from the table below
(ATDKDAP*;ATDKDAZ$$DAY*)
| Table 1 |
| Reply Code (AF72) | Reply |
| BB | PACK |
| AZ | PLATE |
| BA | PRESSURE ADHESIVE BACK |
| AP | ROLL |
| AY | VACUUM BACK |
ATDLDCOPY BOARD TYPE
INDICATES THE TYPE OF COPY BOARD PROVIDED.
Enter the applicable reply code from the table below
(ATDLDBC*;ATDLDBD$DBE*)
| Table 1 |
| Reply Code (AF72) | Reply |
| AR | OPEN |
| BC | SPRING BACK |
| BE | TRANSPARENT |
| BD | VACUUM |
ATDP*JCOPY BOARD MAXIMUM WIDTH
THE MAXIMUM MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE COPY BOARD,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ATDPJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
ATDQ*JCOPY BOARD MAXIMUM LENGTH
THE MAXIMUM MEASUREMENT OF THE LONGEST DIMENSION OF THE COPY BOARD,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ATDQJL2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
IF STYLE/REPLY CODE(s) AJ WERE ENTERED FOR MRC ATDR, YOU MUST ANSWER MRC (ATDT and ATDZ)
ATDR*JVACUUM PUMP MOTOR VOLTAGE RATING
THE TYPE AND AMOUNT OF VOLTAGE FOR WHICH THE VACUUM PUMP MOTOR IS DESIGNED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ATDRJAK2.0*;ATDRJAK2.0$$JAK2.1*)
| Table 1 |
| Reply Code (AG13) | Reply |
| AJ | ALTERNATING CURRENT |
| AK | DIRECT CURRENT |
ATDT*BVACUUM PUMP MOTOR CURRENT FREQUENCY IN HERTZ
THE CYCLES PER SECOND (HERTZ) OF ALTERNATING CURRENT FOR WHICH THE VACUUM PUMP MOTOR IS DESIGNED.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ATDTB2.0)
ATDZ*DVACUUM PUMP MOTOR PHASE
THE NUMBER OF ALTERNATING CURRENT PHASES FOR WHICH THE VACUUM PUMP MOTOR IS DESIGNED.
Enter the applicable reply code from the table below
(ATDZDC*;ATDZDB$DA*)
| Table 1 |
| Reply Code (AD02) | Reply |
| A | SINGLE |
| C | THREE |
| B | TWO |
IF STYLE/REPLY CODE(s) AJ WERE ENTERED FOR MRC ATEA, YOU MUST ANSWER MRC (ATEB and ATEC)
ATEA*JILLUMINATED COPY BOARD VOLTAGE RATING
THE TYPE AND AMOUNT OF VOLTAGE FOR WHICH THE ILLUMINATED COPY BOARD IS DESIGNED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ATEAJAJ2.0*;ATEAJAJ2.0$$JAJ2.1*)
| Table 1 |
| Reply Code (AG13) | Reply |
| AJ | ALTERNATING CURRENT |
| AK | DIRECT CURRENT |
ATEB*BILLUMINATED COPY BOARD CURRENT FREQUENCY IN HERTZ
THE CYCLES PER SECOND /HERTZ/ OF ALTERNATING CURRENT FOR WHICH THE ILLUMINATED COPY BOARD IS DESIGNED.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ATEBB2.0)
ATEC*BILLUMINATED COPY BOARD WATTAGE RATING
THE MAXIMUM AMOUNT OF POWER FOR WHICH THE ILLUMINATED COPY BOARD IS DESIGNED,EXPRESSED IN WATTS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ATECB2.0*;ATECB2.0$$BM2.0*)
IF STYLE/REPLY CODE(s) AJ WERE ENTERED FOR MRC ATED, YOU MUST ANSWER MRC (ATEE and ATEF)
ATED*JFOCUSING DRIVE MOTOR VOLTAGE RATING
THE TYPE AND AMOUNT OF VOLTAGE FOR WHICH THE FOCUSING DRIVE MOTOR IS DESIGNED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ATEDJAK2.0*;ATEDJAK2.0$$JAK2.1*)
| Table 1 |
| Reply Code (AG13) | Reply |
| AJ | ALTERNATING CURRENT |
| AK | DIRECT CURRENT |
ATEE*BFOCUSING DRIVE MOTOR CURRENT FREQUENCY IN HERTZ
THE CYCLES PER SECOND (HERTZ) OF ALTERNATING CURRENT FOR WHICH THE FOCUSING DRIVE MOTOR IS DESIGNED.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ATEEB2.0)
ATEF*DFOCUSING DRIVE MOTOR PHASE
THE NUMBER OF ALTERNATING CURRENT PHASES FOR WHICH THE FOCUSING DRIVE MOTOR IS DESIGNED.
Enter the applicable reply code from the table below
(ATEFDC*;ATEFDA$DB*)
| Table 1 |
| Reply Code (AD02) | Reply |
| A | SINGLE |
| C | THREE |
| B | TWO |
ABFF*DFURNISHED ITEMS
ITEMS FURNISHED AS ACCESSORIES WHICH ARE NOT SPECIFIED ELSEWHERE.
Enter the applicable reply code from the table below
(ABFFDMV*;ABFFDVI$$DMQ*)
| Table 1 |
| Reply Code (AB28) | Reply |
| XK | 15 DEG SHUTTER |
| XL | 45 DEG SHUTTER |
| XM | 72 DEG SHUTTER |
| XG | 8 IN. FLASH REFLECTOR |
| LX | AC TO DC ADAPTER |
| VH | ADJUSTABLE EXPOSURE CALCULATOR |
| MC | APERATURE BORE SIGHT ASSEMBLY |
| XD | ARGON TIMING LIGHT |
| VK | BASE W/EASEL |
| MF | BATTERY CHARGER |
| VL | BATTERY HOLDER |
| VM | BATTERY PACK |
| VE | BEZEL ADAPTER RING |
| NP | CABLE RELEASE |
| VJ | CAMERA BACK |
| NF | CAMERA DRIVE MOTOR |
| WJ | CAMERA FRAME |
| VP | CAMERA MOUNT |
| NM | CAMERA RANGEFINDER |
| XR | CAMERA SUPPORT |
| NX | CAMERA VIEWFINDER |
| NT | CAMERA/EVENT TIMING UNIT SYNCHRONIZER |
| VQ | CAPTION SLATE |
| HG | CARRYING CASE |
| NR | CARRYING STRAP |
| WP | CATHODE RAY TUBE HOOD-ADAPTER |
| BGL | COLLIMATOR LENS |
| WK | CUT FILM HOLDER |
| VX | DATA RECORDING CHAMBER |
| BGM | DIODE |
| BGN | EFFECTS BOX |
| VY | ELECTRICAL BRUSHES |
| NE | EXPOSURE METER |
| MM | EYE CUP |
| VZ | FILM CASSETTE |
| WL | FILM HOLDER |
| ND | FILM MAGAZINE |
| WA | FILM MAGAZINE CONTROL BOX |
| VF | FILM PACK ADAPTER |
| WM | FILM PACK HOLDER |
| XP | FILM REEL |
| XQ | FILM REEL CAN |
| WB | FILM WIND BACK DEVICE |
| MW | FILTER HOLDER |
| MY | FILTER KIT |
| WF | FIXATION LAMP |
| MR | FLASH GUN |
| MD | FLASH MOUNT BRACKET |
| XS | FLASH SYNCHRONIZER |
| MG | FLASH SYNCHRONIZER CORD |
| VS | FOCUSING CLOTH |
| WG | FOCUSING DEVICE |
| NJ | FOCUSING PANEL |
| WH | FOOTAGE COUNTER |
| VW | FRAME COUNTER |
| ML | HAND CRANK |
| HE | HANDLE |
| WZ | ILLUMINATION LAMP |
| BGP | IMAGE INTENSIFIER |
| WQ | INCANDESCENT LAMP |
| WR | INSTRUCTION MANUAL |
| MS | INTERNAL HEATER |
| WS | INTERVALOMETER |
| XA | LAMPHOLDER ADAPTER |
| XB | LENS AND SHUTTER ASSEMBLY |
| MB | LENS BELLOWS ATTACHMENT |
| VN | LENS BRUSH |
| ME | LENS CAP |
| XC | LENS CONE ASSEMBLY |
| MJ | LENS COVER |
| WX | LENS COVER KIT |
| MN | LENS FILTER |
| MX | LENS HOOD |
| WW | LENS HOOD KIT |
| MZ | LENS KIT |
| LY | LENS MOUNT ADAPTER |
| NS | LENS SUPPORT |
| NW | LENS TISSUE |
| NA | LENSES |
| NH | LUBRICATING OIL |
| VR | MAGAZINE CARRYING CASE |
| NG | MAGAZINE DRIVE MOTOR |
| NL | MAGAZINE POWER SUPPLY/SPEED CONTROL UNIT |
| VG | MOTOR ADAPTER |
| LZ | MOUNTING ADAPTER |
| XE | PISTOL GRIP |
| NK | POWER PACK |
| MH | POWER PACK CORD |
| NN | POWER SUPPLY RECTIFIER |
| XY | PRESSLOCK TRIPOD MOUNT |
| MK | PROTECTIVE COVER |
| NB | QUICK FOCUSING LEVER |
| WC | RED LENS FILTER |
| XF | REFLECTOR |
| XH | REMOTE CONTROL UNIT |
| WE | RFI FILTER |
| MA | RING FILTER ADAPTER |
| WN | ROLL FILM HOLDER |
| NQ | SHADE LENS |
| XJ | SHOULDER CARRYING STRAP SCREW |
| WY | SHUTTER KIT |
| VT | SHUTTER TRIP CONTROL |
| XN | SLIT MASKS |
| MQ | SPEED CONTROL GEARBOX |
| MP | SPOOL GAGE |
| BGQ | SWITCHING ELEMENT |
| XT | TIME RECORDING UNIT |
| XW | TIMING LIGHT |
| BGR | TRANSISTOR |
| XX | TRANSPARENCY SLIDE |
| BGS | TURRET HEAD LENS |
| BGT | VIEWFINDER ELBOW |
| WT | WINDING KEY |
| WD | YELLOW LENS FILTER |
| NC | ZOOM CONTROL LEVER |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDRTA000*;PRMTDAUA000$DPDA000*;PRMTDAUA000$$DPDA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJAZA0002.0*;PMLCJAZA0002.0$$JAZA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJRTA000R2.0*;PMWTJRTA000R2.0$JRTA000R2.0*;PMWTJRTA000R2.0$$JRTA000R2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
AJJZ*DDOCUMENT TYPE
INDICATES THE TYPE OF DOCUMENT BY THE TITLE.
Enter the applicable reply code from the table below
(AJJZDAB*;AJJZDAJ$DAI*)
| Table 1 |
| Reply Code (AF70) | Reply |
| AE | FEDERAL SPECIFICATION |
| AC | MILITARY SPECIFICATION |
| AF | MILITARY STANDARD |
| AH | SUPPLY CATALOG |
| AJ | SUPPLY MANUAL |
| AB | TECHNICAL MANUAL |
| AG | TECHNICAL ORDER |
| AD | TRAINING MANUAL |
AJKA*ADOCUMENT IDENTIFICATION
THE NUMBER OR SYMBOL USED TO IDENTIFY THE DOCUMENT.
Enter the alpha-numeric reply with a minimum of one character.
(AJKAAI0)
ATEH*GGOVERNMENT TYPE NUMBER ASSIGNEE
THE NAME OF THE GOVERNMENT ACTIVITY ASSIGNING THE TYPE NUMBER TO THE ITEM.
Enter clear text.
(ATEHGCLEARTEXT)
ATEJ*GTYPE DESIGNATION
THE IDENTIFYING DESIGNATOR ASSIGNED TO THE ITEM.
Enter clear text.
(ATEJGCLEARTEXT)
ATEK*GAIRCRAFT MOUNT NUMBER
THE NUMBER ASSIGNED TO THE AIRCRAFT MOUNT.
Enter clear text.
(ATEKGCLEARTEXT)
ATEL*GGOVERNMENT MOUNT NUMBER ASSIGNEE
THE NAME OF THE GOVERNMENT ACTIVITY ASSIGNING THE NUMBER TO THE MOUNT.
Enter clear text.
(ATELGCLEARTEXT)
AWJN*JUNPACKAGED UNIT WEIGHT
THE MEASURED WEIGHT OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING MATERIAL. PLEASE USE MRC CTJS IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AWJNJAJ2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| AJ | KILOGRAMS |
| AS | POUNDS |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
PKQT*AINTERMEDIATE PACKAGE QUANTITY
THE NUMBER OF WRAPS,BOXES,OR BUNDLES,WHICH CONTAINS TWO OR MORE UNITS OF ISSUE,PLACED INSIDE AN EXTERIOR CONTAINER.
Enter the numeric reply with a minimum of one digit.
(PKQTA10*)
EXQT*AEXTERIOR CONTAINER QUANTITY
THE NUMBER OF UNITS OF ISSUE PLACED INSIDE THE EXTERIOR CONTAINER. PLEASE USE MRC NMBR WITH ISAC CODING OF OUTER CONTAINER IN PLACE OF THIS DISCONTINUED MRC.
Enter the numeric reply with a minimum of one digit.
(EXQTA10*)
SUWT*JUNIT OF ISSUE WEIGHT
THE MEASURED WEIGHT OF THE ACTUAL CONTAINER(S) OR SUPPORTING DEVICE(S) WHICH IS IN DIRECT CONTACT WITH THE ITEM AND ITS CONTENTS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(SUWTJKG2.0*)
| Table 1 |
| Reply Code (AN75) | Reply |
| KG | KILOGRAMS |
| LB | POUNDS |
ECWT*JEXTERIOR CONTAINER WEIGHT
THE MEASURED WEIGHT OF THE EXTERIOR CONTAINER. PLEASE USE MRC AJWK WITH ISAC CODING OF OUTER CONTAINER IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ECWTJKG2.0*)
| Table 1 |
| Reply Code (AN75) | Reply |
| KG | KILOGRAMS |
| LB | POUNDS |
SUCB*JUNIT OF ISSUE CUBE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF THE UNIT OF ISSUE AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(SUCBJCF2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CF | CUBIC FEET |
| CM | CUBIC METERS |
EXME*JEXTERIOR CONTAINER CUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF THE EXTERIOR CONTAINER AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(EXMEJCM2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CF | CUBIC FEET |
| CM | CUBIC METERS |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information