A precision telescopic instrument used in topographic and geodetic surveying or precise alignment operations. Generally, the optical systems for reading the horizontal and vertical circles are fully inclosed. The reading of the circles is made through optical micrometers. Some optical systems are so designed that readings of diametrically opposite points of the circles are mechanically averaged. The instruments are leveled by three leveling screws. Internal illumination may be provided for reading the circles and viewing the reticle crosslines. Excludes:TRANSIT and TRANSIT, POCKET.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED18488*)
APQBDUNIT TYPE
INDICATES THE TYPE OF UNIT.
Enter the applicable reply code from the table below
(APQBDAFF*;APQBDCCN$DCMA*)
| Table 1 |
| Reply Code (AK95) | Reply |
| AEQ | ANCHORED |
| AER | ARCHITECT |
| AES | ARM |
| AET | BLACKBOARD |
| AEW | BUILDER |
| AEX | CHICAGO |
| AEY | CONCRETE FINISHERS SMOOTHNESS |
| AEZ | CORNER-ANCHORED |
| AFA | DIRECTIONAL |
| AFB | DISC |
| AFC | DRAFTSMAN |
| AFD | DROP-BOW |
| AFE | DROP-SPRING BOW |
| AFF | FLEXIBLE |
| AFG | FOLDING |
| AFH | FRISCO |
| AFJ | GEODETIC |
| AFK | HAIRSPRING |
| AFL | HAND |
| AFM | HANDLE |
| AFN | LEVELING |
| AFP | MACHINIST |
| AFR | MID-ANCHORED |
| AFS | MOUNTED |
| AFT | NONTELESCOPING |
| AFW | ONE-PIECE |
| AFX | OPEN CENTER |
| AFY | PHILADELPHIA |
| AFZ | PLAIN |
| AGA | PLOTTING |
| AGB | POLAR |
| AGC | PRECISE LEVELING |
| AGD | PRINTER |
| AGE | RADIAL |
| AGF | REPEATING |
| AGG | ROLLING |
| AGH | SECTIONAL |
| CCN | SINE BAR |
| AGJ | SOLID |
| AGK | SPRING-BOW |
| AGL | STANDARD |
| AGM | STEPPING |
| AGN | STRAIGHT |
| AGP | STRAIGHT EDGE |
| CLZ | STRAIGHT FOUR EDGES |
| CMA | STRAIGHT KNIFE EDGE |
| AGQ | SUSPENDED |
| AGR | TELESCOPING |
| AGS | TOOLMAKER |
| AGT | TRACK |
| AGW | WATCH |
BCTM*ALEVELING SCREW QUANTITY
THE NUMBER OF LEVELING SCREW(S) PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BCTMA10*)
AAWN*DBODY CROSS-SECTIONAL SHAPE
THE PHYSICAL CONFIGURATION OF THE BODY WHEN VIEWED IN CROSS SECTION.
Enter the applicable reply code from the table below
(AAWNDSQ*;AAWNDRT$DRT*)
| Table 1 |
| Reply Code (AD07) | Reply |
| RT | RECTANGULAR |
| SQ | SQUARE |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAB2.0*;ABHPJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BCGY*DSIGHTING DEVICE TYPE
INDICATES THE TYPE OF SIGHTING DEVICE PROVIDED.
Enter the applicable reply code from the table below
(BCGYDBE*;BCGYDBC$DBD*)
| Table 1 |
| Reply Code (AD54) | Reply |
| BC | FOLDING |
| BD | NONMAGNIFYING |
| BE | TELESCOPE |
BCTB*DTELESCOPE TYPE
INDICATES THE TYPE OF TELESCOPE PROVIDED.
Enter the applicable reply code from the table below
(BCTBDBG*;BCTBDBF$DBF*)
| Table 1 |
| Reply Code (AD54) | Reply |
| BF | ERECTING |
| BG | INVERTING |
BCTC*JTELESCOPE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF A TELESCOPE,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BCTCJAB2.0*;BCTCJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BCTD*DFOCUSING TYPE
INDICATES THE TYPE OF FOCUSING PROVIDED.
Enter the applicable reply code from the table below
(BCTDDAFC*;BCTDDAFD$DAFD*)
| Table 1 |
| Reply Code (AH21) | Reply |
| AFC | EXTERNAL |
| AFD | INTERNAL |
BCTF*JDIAMETER MAGNIFYING POWER
AN INDICATION OF THE NUMBER OF TIMES AN ITEM CAN ENLARGE A DIAMETER.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BCTFJB2.0*;BCTFJB2.0$$JB2.1*)
| Table 1 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BCTG*DSTADIA HAIR
AN INDICATION OF WHETHER OR NOT A STADIA HAIR IS INCLUDED.
Enter the applicable reply code from the table below
(BCTGDC*;BCTGDB$DB*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
BCTH*DSTRIDING LEVEL
AN INDICATION OF WHETHER OR NOT A STRIDING LEVEL IS INCLUDED.
Enter the applicable reply code from the table below
(BCTHDC*;BCTHDB$DC*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
BCTJ*JEFFECTIVE APERTURE SIZE
DESIGNATES THE REAL OR TRUE SIZE OF THE OPENING.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BCTJJLC2.0*;BCTJJLC2.0$$JLC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BCTK*DAUXILIARY TELESCOPE
AN INDICATION OF WHETHER OR NOT AN AUXILIARY TELESCOPE IS INCLUDED.
Enter the applicable reply code from the table below
(BCTKDC*;BCTKDB$DC*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
BCTL*DTELESCOPE LEVEL VIAL
AN INDICATION OF WHETHER OR NOT A TELESCOPE LEVEL VIAL IS INCLUDED.
Enter the applicable reply code from the table below
(BCTLDC*;BCTLDB$DB*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
ANXYDILLUMINATED FEATURE
AN INDICATION OF WHETHER OR NOT AN ILLUMINATED FEATURE IS INCLUDED. IF INCLUDED PLEASE USE MRC ABFF IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable reply code from the table below
(ANXYDC*;ANXYDB$DB*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
AMYJDTRIPOD
AN INDICATION OF WHETHER OR NOT A TRIPOD IS INCLUDED.
Enter the applicable reply code from the table below
(AMYJDB*;AMYJDC$DC*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
BCFM*DLEG TYPE
INDICATES THE TYPE OF LEG PROVIDED.
Enter the applicable reply code from the table below
(BCFMDA*;BCFMDANW$DAPW*)
| Table 1 |
| Reply Code (AK54) | Reply |
| A | ANY ACCEPTABLE |
| APW | EXTENSION |
| ANW | FIXED |
BDBWDGRADUATION UNIT ON HORIZONTAL/VERTICAL CIRCLE
THE INCREMENT OF MEASURE REPRESENTED BY THE MARKING/S/ ON THE HORIZONTAL AND VERTICAL CIRCLES.
Enter the applicable reply code from the table below
(BDBWDAAZ*;BDBWDAAC$DAAW*)
| Table 1 |
| Reply Code (AJ40) | Reply |
| AAZ | CENTESIMALS |
| AAC | DEGREES |
| AAW | MILS |
BDBXJMINIMUM GRADUATION
THE SMALLEST INCREMENT OF MEASURE REPRESENTED BY THE MARKING(S) ON THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BDBXJABBAK2.0*;BDBXJABBAK2.0$JABBAK2.1*)
| Table 1 |
| Reply Code (AJ40) | Reply |
| ABA | CENTESIMAL SECONDS |
| AAC | DEGREES |
| ABB | MILLISECONDS |
| AAX | MINUTES |
| AAY | SECONDS |
| Table 2 |
| Reply Code (AM12) | Reply |
| AK | BREAKDOWN SCALE |
| AL | MICROMETER DRUM |
BDBYDAUTOCOLLIMATION EYEPIECE
AN INDICATION OF WHETHER OR NOT AN AUTOCOLLIMATION EYEPIECE IS INCLUDED.
Enter the applicable reply code from the table below
(BDBYDB*;BDBYDC$DC*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
BDBZDDOUBLE CENTER
AN INDICATION OF WHETHER OR NOT A DOUBLE CENTER IS PROVIDED.
Enter the applicable reply code from the table below
(BDBZDB*;BDBZDC$DB*)
| Table 1 |
| Reply Code (AB22) | Reply |
| C | NOT PROVIDED |
| B | PROVIDED |
BDCBDHORIZONTAL BASE DETACHABLE TRIBRACH
AN INDICATION OF WHETHER OR NOT A HORIZONTAL BASE DETACHABLE TRIBRACH IS INCLUDED.
Enter the applicable reply code from the table below
(BDCBDB*;BDCBDC$DB*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
BDCC*DDETACHABLE TRIBRACH QUICK RELEASE MECHANISM
AN INDICATION OF WHETHER OR NOT A DETACHABLE TRIBRACH QUICK RELEASE MECHANISM IS INCLUDED.
Enter the applicable reply code from the table below
(BDCCDC*;BDCCDB$DB*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
BDCDDHORIZONTAL BASE AUTOMATIC CENTERING DEVICE
AN INDICATION OF WHETHER OR NOT A HORIZONTAL BASE AUTOMATIC CENTERING DEVICE IS INCLUDED.
Enter the applicable reply code from the table below
(BDCDDC*;BDCDDB$DB*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
BDCFDOPTICAL PLUMB
AN INDICATION OF WHETHER OR NOT AN OPTICAL PLUMB IS INCLUDED.
Enter the applicable reply code from the table below
(BDCFDB*;BDCFDC$DC*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
BDCGDCIRCULAR LEVEL
AN INDICATION OF WHETHER OR NOT A CIRCULAR LEVEL IS INCLUDED.
Enter the applicable reply code from the table below
(BDCGDB*;BDCGDC$DB*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
BDCHDPLOTTING DEVICE
AN INDICATION OF WHETHER OR NOT A PLOTTING DEVICE IS INCLUDED.
Enter the applicable reply code from the table below
(BDCHDB*;BDCHDC$DB*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
AKYD*GACCESSORY COMPONENTS AND QUANTITY
THE NAME AND NUMBER OF PARTS SUPPLIED WITH THE ITEM WHICH MAY BE REQUIRED FOR APPLICATION.
Enter clear text.
(AKYDGCLEARTEXT)
BDCK*HCONTAINER MATERIAL AND TYPE
THE ELEMENT,COMPOUND,OR MIXTURE OF WHICH THE CONTAINER IS FABRICATED,AND THE TYPE.
Enter the applicable Reply Code from Tables 1 & 2 below.
(BDCKHST0000BR2.0*;BDCKHST0000BR2.0$HST0000BR2.0*;BDCKHST0000BR2.0$$HST0000BR2.1*)
| Table 1 |
| Reply Code (AD09) | Reply |
| ALC000 | ALUMINUM |
| AL0000 | ALUMINUM ALLOY |
| WDAB00 | BASSWOOD |
| WDAC00 | BOXWOOD |
| BR0000 | BRASS |
| CPB000 | BRISTOL BOARD |
| BN0000 | BRONZE |
| CPE000 | CHIPBOARD |
| CR0000 | CHROMIUM |
| DFX000 | CLOTH, ACRYLIC |
| CQA000 | CORK |
| ABT000 | CORUNDUM |
| CCA000 | COTTON CANVAS, STANDARD |
| FB0000 | FIBER |
| FD0000 | FIBERBOARD |
| FG0000 | FIBERGLASS |
| GS0000 | GLASS |
| WDAD00 | HARDBOARD |
| WDAE00 | HARDWOOD |
| BXA000 | HORN |
| FE0000 | IRON |
| FEA000 | IRON, CAST |
| DFAAB0 | JUTE |
| LR0000 | LEATHER |
| LRA000 | LEATHER, ARTIFICIAL |
| LE0000 | LINOLEUM |
| MG0000 | MAGNESIUM |
| MGA000 | MAGNESIUM ALLOY |
| ME0000 | METAL |
| NF0000 | NICKEL |
| NFK000 | NICKEL BRASS |
| NS0000 | NICKEL SILVER |
| NFT000 | NICKEL STEEL |
| PF0000 | PAPER |
| PC0000 | PLASTIC |
| PCH000 | PLASTIC, CELLULOSE NITRATE |
| PCDT00 | PLASTIC, MOLDED |
| PCDW00 | PLASTIC, OPTICAL |
| PCDX00 | PLASTIC, TRANSPARENT |
| PCDY00 | PLASTIC, VINYL ACETATE RESIN |
| PW0000 | PLYWOOD |
| RCAZ00 | RUBBER, HARD |
| JEA000 | SAPPHIRE |
| AG0000 | SILVER |
| ST0000 | STEEL |
| STB000 | STEEL, CORROSION RESISTING |
| STAAE0 | STEEL, CORROSION RESISTING, HARDENED |
| STAAF0 | STEEL, CORROSION RESISTING, SEMIHARDENED |
| STAAG0 | STEEL, HARDENED |
| STD000 | STEEL, STAINLESS |
| WDT000 | TEAKWOOD |
| TL0000 | TOOL STEEL |
| TNA000 | TUNGSTEN CARBIDE |
| WD0000 | WOOD |
| WDG000 | WOOD, BALSA |
| WDW000 | WOOD, HARD MAPLE |
| WDK000 | WOOD, MAHOGANY |
| WDA000 | WOOD, MAPLE |
| WDX000 | WOOD, PINE |
| WDZ000 | WOOD, PRESSED |
| WDY000 | WOOD, WHITE PINE |
| WDAA00 | WOOD, YELLOW BIRCH |
| ZNL000 | ZINC ALLOY |
| Table 2 |
| Reply Code (AF72) | Reply |
| BP | CARRIER |
| BQ | CARRYING CASE |
| BR | KNAPSACK |
| BS | TRANSPORTATION CASE |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDAZA000*;PRMTDPDA000$DAGA000*;PRMTDPDA000$$DAGA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJAZA000F2.0*;PMWTJAZA000F2.0$$JAZA000F2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJRTA0002.0*;PMLCJRTA0002.0$JRTA0002.0*;PMLCJRTA0002.0$$JRTA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAG4)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAK4)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.
(NTRDA80-05-28*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCM2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CM | CUBIC METERS |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information