A cap designed to be mounted on the vent piping of a fuel storage tank to allow the unimpeded flow of gases in and out. It prevents the admission of rain, dirt, and other foreign matter to the tank. Excludes:BREATHER.
expandFSC Information
5430Storage Tanks
expandColloquial Information
No Colloquials assigned to this Approve Item Name at this time
expandChange List
ISAC Reply 3AAT added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3AEF added to MRC MATT.
ISAC Reply 3AYF added to MRC MATT.
ISAC Reply 3AYG added to MRC MATT.
ISAC Reply 3AYH added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 1A deleted from MRC MATT.
ISAC Reply 1B deleted from MRC MATT.
ISAC Reply 1C deleted from MRC MATT.
ISAC Reply 1D deleted from MRC MATT.
ISAC Reply 1E deleted from MRC MATT.
ISAC Reply 1F deleted from MRC MATT.
ISAC Reply 1X deleted from MRC MATT.
ISAC Reply 3AAT added to MRC MDCL.
ISAC Reply 3AEE added to MRC MDCL.
ISAC Reply 3AEF added to MRC MDCL.
ISAC Reply 3AYF added to MRC MDCL.
ISAC Reply 3AYG added to MRC MDCL.
ISAC Reply 3AYH added to MRC MDCL.
ISAC Reply 3HOU added to MRC MDCL.
ISAC Reply 1A deleted from MRC MDCL.
ISAC Reply 1B deleted from MRC MDCL.
ISAC Reply 1C deleted from MRC MDCL.
ISAC Reply 1D deleted from MRC MDCL.
ISAC Reply 1E deleted from MRC MDCL.
ISAC Reply 1F deleted from MRC MDCL.
ISAC Reply 1X deleted from MRC MDCL.
ISAC Reply 3AAT added to MRC SFTT.
ISAC Reply 3AEE added to MRC SFTT.
ISAC Reply 3AEF added to MRC SFTT.
ISAC Reply 3AYG added to MRC SFTT.
ISAC Reply 3HOU added to MRC SFTT.
ISAC Reply 1A deleted from MRC SFTT.
ISAC Reply 1B deleted from MRC SFTT.
ISAC Reply 1C deleted from MRC SFTT.
ISAC Reply 1D deleted from MRC SFTT.
ISAC Reply 1E deleted from MRC SFTT.
ISAC Reply 1F deleted from MRC SFTT.
ISAC Reply 1X deleted from MRC SFTT.
ISAC Reply 3AAT added to MRC STDC.
ISAC Reply 3AEE added to MRC STDC.
ISAC Reply 3AEF added to MRC STDC.
ISAC Reply 3AYG added to MRC STDC.
ISAC Reply 3HOU added to MRC STDC.
ISAC Reply 1A deleted from MRC STDC.
ISAC Reply 1B deleted from MRC STDC.
ISAC Reply 1C deleted from MRC STDC.
ISAC Reply 1D deleted from MRC STDC.
ISAC Reply 1E deleted from MRC STDC.
ISAC Reply 1F deleted from MRC STDC.
ISAC Reply 1X deleted from MRC STDC.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED17502*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AEFDAL2219*;MATT3AEFDAL2219$DST0317*;MATT3AEFDAL2219$$DST0317*)
Table 1
ISAC Field Indicator (5000)Location
3AATBODY
3AEEOVERALL
3AEFHANDLE
3AYFSCREEN
3AYGTHREADED PORTION
3AYHVENT ACTUATOR
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (MA01)Reply
ALA000ALUMINUM
ALB000ALUMINUM ALLOY
AL1100ALUMINUM ALLOY 1100
AL0113ALUMINUM ALLOY 113
AL2011ALUMINUM ALLOY 2011
AL2014ALUMINUM ALLOY 2014
AL2017ALUMINUM ALLOY 2017
AL2018ALUMINUM ALLOY 2018
AL2020ALUMINUM ALLOY 2020
AL2024ALUMINUM ALLOY 2024
AL2117ALUMINUM ALLOY 2117
AL2219ALUMINUM ALLOY 2219
AL0038ALUMINUM ALLOY 222.0
AL0039ALUMINUM ALLOY 242.0
AL2618ALUMINUM ALLOY 2618
AL3003ALUMINUM ALLOY 3003
AL0045ALUMINUM ALLOY 355.0
AL0046ALUMINUM ALLOY 356.0
AL4032ALUMINUM ALLOY 4032
AL5052ALUMINUM ALLOY 5052
AL5083ALUMINUM ALLOY 5083
AL5086ALUMINUM ALLOY 5086
AL5454ALUMINUM ALLOY 5454
AL5456ALUMINUM ALLOY 5456
AL6061ALUMINUM ALLOY 6061
AL6063ALUMINUM ALLOY 6063
AL6066ALUMINUM ALLOY 6066
AL6151ALUMINUM ALLOY 6151
AL7075ALUMINUM ALLOY 7075
AL7076ALUMINUM ALLOY 7076
AL7079ALUMINUM ALLOY 7079
AL7178ALUMINUM ALLOY 7178
AL0002ALUMINUM ALLOY A356.0
AL0028ALUMINUM ALLOY A380.0
AL0040ALUMINUM ALLOY B295.0
BEA000BERYLLIUM
CSA000CELLULOSE
CUA000COPPER
CUB000COPPER ALLOY
CU0060COPPER ALLOY 11
CU0076COPPER ALLOY 240
CU0079COPPER ALLOY 260
CU0080COPPER ALLOY 268
CU0091COPPER ALLOY 360
CU0092COPPER ALLOY 377
CU0098COPPER ALLOY 462
CU0099COPPER ALLOY 464
CU0100COPPER ALLOY 482
CU0103COPPER ALLOY 510
CU0106COPPER ALLOY 524
CU0109COPPER ALLOY 544
CU0172COPPER ALLOY 836
CU0174COPPER ALLOY 842
CU0175COPPER ALLOY 844
CU0845COPPER ALLOY 845
CU0180COPPER ALLOY 857
CU0181COPPER ALLOY 861
CU0182COPPER ALLOY 862
CU0183COPPER ALLOY 863
CU0184COPPER ALLOY 864
CU0185COPPER ALLOY 865
CU0195COPPER ALLOY 903
CU0198COPPER ALLOY 910
CU0199COPPER ALLOY 913
CU0202COPPER ALLOY 922
CU0207COPPER ALLOY 934
CU0212COPPER ALLOY 940
CU0219COPPER ALLOY 954
CU0995COPPER ALLOY 995
CU0250COPPER ALLOY CA854
CU0054COPPER ALLOY G1
GSA000GLASS
FEA000IRON
PBA000LEAD
PBB000LEAD ALLOY
PB0004LEAD ALLOY 13
PB0005LEAD ALLOY 50A
PB0001LEAD ALLOY B
PB0002LEAD ALLOY C
PB0003LEAD ALLOY D
LRA000LEATHER
MGA000MAGNESIUM
MG0001MAGNESIUM ALLOY AZ31B
MG0010MAGNESIUM ALLOY AZ31C
MG0011MAGNESIUM ALLOY AZ31Z
MG0003MAGNESIUM ALLOY AZ80A
MG0004MAGNESIUM ALLOY HK31A
MG0005MAGNESIUM ALLOY M1A
MG0006MAGNESIUM ALLOY ZK60A
MNA000MANGANESE
MTC000METAL
NLA000NICKEL
NLB000NICKEL ALLOY
NL0008NICKEL ALLOY 400
NL0019NICKEL ALLOY 502
NL0009NICKEL ALLOY 600
NL0010NICKEL ALLOY 718
NL0001NICKEL ALLOY A
NL0002NICKEL ALLOY B
NL0014NICKEL ALLOY C
NL0011NICKEL ALLOY D
NL0013NICKEL ALLOY E
NL0022NICKEL ALLOY F
NL0018NICKEL ALLOY K-500
NL0017NICKEL ALLOY R-405
PCA000PLASTIC
PCM000PLASTIC PHENOL-FORMALDEHYDE
PCP000PLASTIC POLYAMIDE (NYLON)
RCA000RUBBER NATURAL
RCB000RUBBER SYNTHETIC
STA000STEEL
ST1010STEEL COMP 1010
ST1011STEEL COMP 1011
ST1012STEEL COMP 1012
ST1013STEEL COMP 1013
ST1015STEEL COMP 1015
ST1016STEEL COMP 1016
ST1018STEEL COMP 1018
ST1020STEEL COMP 1020
ST1022STEEL COMP 1022
ST1025STEEL COMP 1025
ST1026STEEL COMP 1026
ST1030STEEL COMP 1030
ST1035STEEL COMP 1035
ST1038STEEL COMP 1038
ST1040STEEL COMP 1040
ST1045STEEL COMP 1045
ST1050STEEL COMP 1050
ST1065STEEL COMP 1065
ST1075STEEL COMP 1075
ST1085STEEL COMP 1085
ST1113STEEL COMP 1113
ST1118STEEL COMP 1118
ST1120STEEL COMP 1120
ST1137STEEL COMP 1137
ST0302STEEL COMP 302
ST0303STEEL COMP 303
ST0078STEEL COMP 303S
ST0304STEEL COMP 304
ST0080STEEL COMP 304L
ST0309STEEL COMP 309
ST0310STEEL COMP 310
ST0154STEEL COMP 310S
ST0316STEEL COMP 316
ST0317STEEL COMP 317
ST0321STEEL COMP 321
ST0347STEEL COMP 347
ST0348STEEL COMP 348
ST0403STEEL COMP 403
ST4032STEEL COMP 4032
ST0253STEEL COMP 4032H
ST0405STEEL COMP 405
ST0410STEEL COMP 410
ST4130STEEL COMP 4130
ST0090STEEL COMP 4130H
ST4135STEEL COMP 4135
ST0091STEEL COMP 4135H
ST0414STEEL COMP 414
ST4140STEEL COMP 4140
ST0093STEEL COMP 4140H
ST0420STEEL COMP 420
ST0100STEEL COMP 420F
ST0430STEEL COMP 430
ST0442STEEL COMP 442
ST0446STEEL COMP 446
ST5130STEEL COMP 5130
ST6150STEEL COMP 6150
ST8630STEEL COMP 8630
ST8640STEEL COMP 8640
ST8720STEEL COMP 8720
ST0147STEEL COMP 8740H
ST0046STEEL COMP MT1010
ST0047STEEL COMP MT1015
ST0048STEEL COMP MT1020
ST0049STEEL COMP MTX1015
ST0050STEEL COMP MTX1020
STB000STEEL CORROSION RESISTING
SNB000TIN
SNA000TIN ALLOY
ZNB000ZINC
ZNA000ZINC ALLOY
ZN0003ZINC ALLOY 903
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
Table 1
ISAC Field Indicator (5000)Location
3AATBODY
3AEEOVERALL
3AEFHANDLE
3AYFSCREEN
3AYGTHREADED PORTION
3AYHVENT ACTUATOR
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AP33)Reply
QAEROSPACE MATERIAL SPEC STD
JAMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
GASSN STD
ACOMMERCIAL ITEM DESCRIPTION
KDEF STAN/SPEC
BFED SPEC
CFED STD
LGOVERNMENT STD/SPEC
NINTERNATIONAL STD/SPEC
FMFR REF
DMIL SPEC
EMIL STD
HNATIONAL SPEC
PNATIONAL STD
MNATIONAL STD/SPEC
Table 3
Reply Code (AP18)Reply
M10TH MATERIAL RESPONSE
N11TH MATERIAL RESPONSE
P12TH MATERIAL RESPONSE
Q13TH MATERIAL RESPONSE
R14TH MATERIAL RESPONSE
S15TH MATERIAL RESPONSE
T16TH MATERIAL RESPONSE
U17TH MATERIAL RESPONSE
W18TH MATERIAL RESPONSE
X19TH MATERIAL RESPONSE
B1ST MATERIAL RESPONSE
Y20TH MATERIAL RESPONSE
Z21ST MATERIAL RESPONSE
V22ND MATERIAL RESPONSE
C2ND MATERIAL RESPONSE
D3RD MATERIAL RESPONSE
E4TH MATERIAL RESPONSE
F5TH MATERIAL RESPONSE
H6TH MATERIAL RESPONSE
J7TH MATERIAL RESPONSE
K8TH MATERIAL RESPONSE
L9TH MATERIAL RESPONSE
GALL MATERIAL RESPONSES
ASINGLE MATERIAL RESPONSE
IF STYLE/REPLY CODE(s) A2, A7, A9, A10, A11, A12, A13, A15, A16, A17, A18 OR A19 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKV and ABKW and AGET)
IF STYLE/REPLY CODE(s) A3 OR A4 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAV and ABKV and ABKW and AGET)
IF STYLE/REPLY CODE(s) A14 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKV and ABKW)
IF STYLE/REPLY CODE(s) B1, B4, B5, B6, B17, B29, B37, B38, B39, B40 OR B41 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKV and ABKW)
IF STYLE/REPLY CODE(s) B2, B3, B9, B10, B11, B12, B13, B14, B15, B16, B18, B19, B20, B21, B22, B23, B24, B25, B26, B27, B28, B30, B31, B32, B33, B34, B35 OR B36 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKV and ABKW)
IF STYLE/REPLY CODE(s) B7 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW)
IF STYLE/REPLY CODE(s) C1, C2, C3, C5 OR C7 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAV and ABKW)
IF STYLE/REPLY CODE(s) B8 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKV)
IF STYLE/REPLY CODE(s) C4, C6 OR C12 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKV and ABKW)
IF STYLE/REPLY CODE(s) C8 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABMK and ABKW)
IF STYLE/REPLY CODE(s) C9 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and ABMK)
IF STYLE/REPLY CODE(s) C10 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and ABMK)
IF STYLE/REPLY CODE(s) C11 OR C21 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW)
IF STYLE/REPLY CODE(s) C13, C14 OR C17 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKV and ABKW)
IF STYLE/REPLY CODE(s) C15, C16, C18 OR C19 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKV and ABKW)
IF STYLE/REPLY CODE(s) C20 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAV and ABKV and ABKW and AGET)
IF STYLE/REPLY CODE(s) C22 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABMK and ABKW)
IF STYLE/REPLY CODE(s) D1 OR D2 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAV and ABKW)
IF STYLE/REPLY CODE(s) D3, D4 OR D5 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKV and ABKW)
IF STYLE/REPLY CODE(s) D6 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKV)
IF STYLE/REPLY CODE(s) E1 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and ABMK and ABHP)
IF STYLE/REPLY CODE(s) F1 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and ABMK)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLC19)
Table 1
Physical Drawing IDReply Code (STYL)Reply
AAI1007A10INSIDE CAM TYPE
AAI1008A11INSIDE CAM TYPE W/ HANDLE
AAI1009A12INSIDE CAM TYPE
AAI1010A13INSIDE CAM TYPE W/ HANDLE
AAI1011A14PLAIN-EXTERNAL LOCK
AAI1012A15CLOSED COOLING SYSTEM TYPE W/ LOOSE VACUUM VALVE
AAI1013A16CLOSED COOLING SYSTEM TYPE W/ LOOSE VACUUM VALVE
AAI1014A17CLOSED COOLING SYSTEM TYPE
AAI1015A18CLOSED COOLING SYSTEM TYPE
AAI1016A19CLOSED COOLING SYSTEM TYPE
AAI1002A2INSIDE CAM TYPE
AAI1003A3INSIDE CAM TYPE W/ LUGS
AAI1004A4INSIDE CAM TYPE W/ LUGS
AAI1005A7INSIDE CAM TYPE
AAI1006A9INSIDE CAM TYPE
AAI1017B1OUTSIDE CAM TYPE
AAI1026B10PRESSURE-VACUUM TYPE FOR EMISSION CONTROL
AAI1027B11PRESSURE-VACUUM TYPE FOR EMISSION CONTOL
AAI1028B12VENTED, ANTI-SURGE TYPE
AAI1029B13VENTED, ANTI-SURGE I.C.C. TYPE
AAI1030B14VENTED, ANTI-SURGE TYPE
AAI1031B15NON-VENTED
AAI1032B16NON-VENTED
AAI1033B17OUTSIDE CAM TYPE
AAI1034B18VENTED, ANTI-SURGE TYPE
AAI1035B19NON-VENTED
AAI1018B2OUTSIDE CAM TYPE
AAI1036B20PRESSURE-VACUUM TYPE FOR EMISSION CONTROL
AAI1037B21PRESSURE-VACUME TYPE FOR EMISSION CONTROL
AAI1038B22PRESSURE-VACUUM TYPE FOR EMISSION CONTROL
AAI1039B23PRESSURE-VACUUM TYPE FOR EMISSION CONTROL
AAI1040B24PRESSURE-VACUME TYPE FOR EMISSION CONTROL
AAI1041B25PRESSURE-VACUUM TYPE FOR EMISSION CONTROL
AAI1042B26PRESSURE-VACUUM TYPE FOR EMISSION CONTROL
AAI1043B27PRESSURE-VACUUM TYPE FOR EMISSION CONTROL
AAI1044B28LOCKING TYPE NON-VENTED
AAI1045B29LOCKING TYPE VENTED, OUTSIDE CAM
AAI1019B3THREADED TYPE-EXTERNAL BAIL HANDLE
AAI1046B30LOCKING TYPE VENTED ANTI-SURGE TYPE
AAI1047B31LOCKING TYPE NON-VENTED
AAI1048B32LOCKING TYPE VENTED, ANTI-SURGE
AAI1049B33LOCKING TYPE VENTED
AAI1050B34LOCKING TYPE VENTED, ANTI-SURGE
AAI1051B35LOCKING TYPE NON-VENTED
AAI1052B36LOCKING, EMISSION CONTROL TYPE
AAI1053B37NON-VENTED THREADED TYPE (EXTERNAL)
AAI1054B38NON-VENTED THREADED TYPE (INTERNAL)
AAI1055B39VENTED THREADED TYPE (INTERNAL)
AAI1020B4OUTSIDE CAM TYPE
AAI1056B40VENTED ORDNANCE NECK THREADED TYPE (INTERNAL)
AAI1057B41THREADED TYPE (EXTERNAL)
AAI1021B5OUTSIDE CAM TYPE
AAI1022B6OUTSIDE CAM TYPE
AAI1023B7THREADED TYPE-EXTERNAL
AAI1024B8PRESSURE FUEL SERVICING
AAI1025B9PRESSURE-VACUUM TYPE FOR EMISSION CONTROL
AAI1058C1HINGE TYPE THREADED INTERNAL
AAI1067C10SNAP TYPE THREADED EXTERNAL
AAI1068C11CROSS BAR TYPE THREADED INTERNAL
AAI1069C12PLAIN-EXTERNAL LOCK
AAI1070C13TUBE TYPE
AAI1071C14TUBE TYPE W/ SIDE CONNECTION
AAI1072C15TUBE TYPE
AAI1073C16ANTI-SURGE TYPE
AAI1074C17TUBE TYPE
AAI1075C18TUBE TYPE
AAI1076C19TUBE TYPE W/ BREATHER HOLE
AAI1059C2HINGE TYPE THREADED EXTERNAL
AAI1077C20CROSS BAR TYPE UNTHREADED
AAI1078C21THREADED TYPE EXTERNAL
AAI1079C22SNAP TYPE (FLANGED)
AAI1060C3LUG TYPE THREADED EXTERNAL
AAI1061C4FLANGE TYPE THREADED INTERNAL
AAI1062C5OFF-SET LUG TYPE THREADED EXTERNAL
AAI1063C6CIRCULAR TYPE THREADED INTERNAL
AAI1064C7OFF-SET LUG TYPE THREADED INTERNAL
AAI1065C8SNAP TYPE PILOT BARREL
AAI1066C9SNAP TYPE COUNTERBORE
AAI1080D1OUTSIDE CAM TYPE W/ LUGS
AAI1081D2INSIDE CAM TYPE W/ LUGS
AAI1082D3OUTSIDE CAM TYPE
AAI1083D4INSIDE CAM TYPE
AAI1084D5THREADED TYPE-INTERNAL
AAI1085D6ADJUSTABLE TYPE-INTERNAL
AAI1086E1VENT
AAI1087F1COMPRESSED GAS CYLINDER
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAB2.0*;ABHPJAB2.0$$JAB2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ABKV*JOUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKVJAC2.0*;ABKVJAC2.0$$JAC2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAA2.0*;ABKWJAA2.0$$JAA2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAB2.0*;ABMKJAB2.0$$JAB2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAB2.0*;ADAVJAB2.0$$JAB2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
AGET*JSEALING LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGETJAA2.0*;AGETJAA2.0$$JAA2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ABEZ*DGRIPPING ACCOMMODATION TYPE
INDICATES THE TYPE OF GRIPPING ACCOMMODATION USED AS AN AID IN THE APPLICATION OF TORQUE.
Enter the applicable reply code from the table below
(ABEZDAK*;ABEZDAH$DAJ*;ABEZDAH$$DAJ*)
Table 1
Reply Code (AB24)Reply
AFHANDLE
ABHEXAGON
AGKNURLED
ACLOBES
AHLUGS
AJNOTCHED
AKPLAIN
ALSTUD
ADWING GRIP
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3AATDCRA000*;SFTT3AATDCRA000$DDCA000*;SFTT3AATDCRA000$$DDCA000*)
Table 1
ISAC Field Indicator (5000)Location
3AATBODY
3AEEOVERALL
3AEFHANDLE
3AYGTHREADED PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (SF01)Reply
ANA000ANODIZE
CDA000CADMIUM
CMA000CHROMATE
CRA000CHROMIUM
CUA000COPPER
DCA000DICHROMATE
ENA000ENAMEL
GFA000GRAPHITE
LQA000LACQUER
NLA000NICKEL
XXB000OXIDE
XXA000OXIDE FILM
PNA000PAINT
PSA000PASSIVATE
PHA000PHOSPHATE
PCA000PLASTIC
PRA000PRIMER
SNA000TIN
VAA000VARNISH
ZNA000ZINC
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
Table 1
ISAC Field Indicator (5000)Location
3AATBODY
3AEEOVERALL
3AEFHANDLE
3AYGTHREADED PORTION
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AP33)Reply
GASSN STD
ACOMMERCIAL ITEM DESCRIPTION
KDEF STAN/SPEC
BFED SPEC
CFED STD
LGOVERNMENT STD/SPEC
NINTERNATIONAL STD/SPEC
FMFR REF
DMIL SPEC
EMIL STD
HNATIONAL SPEC
PNATIONAL STD
MNATIONAL STD/SPEC
Table 3
Reply Code (AP39)Reply
M10TH TREATMENT RESPONSE
N11TH TREATMENT RESPONSE
P12TH TREATMENT RESPONSE
Q13TH TREATMENT RESPONSE
R14TH TREATMENT RESPONSE
S15TH TREATMENT RESPONSE
B1ST TREATMENT RESPONSE
C2ND TREATMENT RESPONSE
D3RD TREATMENT RESPONSE
E4TH TREATMENT RESPONSE
F5TH TREATMENT RESPONSE
H6TH TREATMENT RESPONSE
J7TH TREATMENT RESPONSE
K8TH TREATMENT RESPONSE
L9TH TREATMENT RESPONSE
GALL TREATMENT RESPONSES
ASINGLE TREATMENT RESPONSE
CQST*JFILLER NECK DIAMETER FOR WHICH DESIGNED
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE FILLER NECK FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQSTJAA2.0*;CQSTJAA2.0$$JAA2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
IF STYLE/REPLY CODE(s) AN, NP, NT, PM, SF, SH OR SP WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (AWDP and AASA)
IF STYLE/REPLY CODE(s) NH OR TT WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (AWDP and AASA and CQRN)
IF STYLE/REPLY CODE(s) SM WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (AWDP and AASA) or (AWDP and CQRN and CQQR and AASA) or (AWDP and CQRN and CTTC and AASA) or (AWDP and CQRN and AAJE and AASA)
IF STYLE/REPLY CODE(s) NS OR UN WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (AWDP and AAJD and AASA) or (AWDP and AAJE and AASA and CQRN)
IF STYLE/REPLY CODE(s) JE, JF, NC, NE, NF OR NJ WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (AWDP and AAJD and AASA) or (AWDP and AAJE and AASA)
THSD*DTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable reply code from the table below
(THSDDPM)
Table 1
Reply Code (AH06)Reply
ANANPT
TTBUTTRESS
SMISO M
NHNH
SPNPS
SFNPSF
SHNPSH
PMNPSM
NPNPT
NTNPTF
UNUN
NCUNC
NEUNEF
NFUNF
NJUNIFIED NATIONAL FINE (UNJ)
JFUNIFIED NATIONAL JOINT FINE (UNJF)
JEUNJEF
NSUNS
AWDP*JTHREAD DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE THREADED PORTION,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AWDPJAC2.0*;AWDPJAC2.0$$JAC2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CQRN*JTHREAD QUANTITY
THE NUMBER OF THREADS PER SPECIFIC MEASUREMENT SCALE.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(CQRNJDTEXT1234*)
Table 1
Reply Code (AB39)Reply
DPER CENTIMETER
CPER INCH
JPER MILLIMETER
AAJD*ATHREAD CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.
Enter the alpha-numeric reply with a minimum of one character.
(AAJDAU0)
CTTC*JTHREAD TOLERANCE CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING ESTABLISHED PITCH AND CREST DIAMETER TOLERANCE POSITION AND GRADE.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(CTTCJNTETEXT1234*)
Table 1
Reply Code (AN73)Reply
EXTEXTERNAL
NTEINTERNAL
AAJE*JTHREAD PITCH DIAMETERS
THE MINIMUM AND MAXIMUM PITCH DIAMETER LIMITS OF A STRAIGHT SCREW THREAD.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AAJEJAM32.0/P50.0*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
CQQR*BTHREAD PITCH IN MILLIMETERS
A MEASUREMENT OF DISTANCE BETWEEN CORRESPONDING POINTS ON TWO ADJACENT THREADS MEASURED PARALLEL TO THE THREAD AXIS,EXPRESSED IN MILLIMETERS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CQQRB2.0)
AASA*JTHREAD LENGTH
A MEASUREMENT OF THE EXTENT OF THREADS,INCLUDING INCOMPLETE THREADS,ALONG A LINE PARALLEL TO THE LONGITUDINAL AXIS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AASAJAC2.0*;AASAJAC2.0$$JAC2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
AZAF*DLOCKING DEVICE TYPE
INDICATES THE TYPE OF DEVICE USED TO LOCK THE ITEM.
Enter the applicable reply code from the table below
(AZAFDBQ*;AZAFDLZ$DLY*)
Table 1
Reply Code (AE36)Reply
BQINTEGRAL KEY LOCK
LYINTEGRAL SELF LOCK
LZPADLOCK EYES
AGEZ*DRETAINING DEVICE TYPE
INDICATES THE TYPE OF RETAINING DEVICE USED TO SAFEGUARD THE ITEM AGAINST LOSS.
Enter the applicable reply code from the table below
(AGEZDHG*;AGEZDAL$$DAM*)
Table 1
Reply Code (AC52)Reply
ALCHAIN
ADHINGE
AMLANYARD
HFSAFETY WIRE
BBSTRAP
HGWIRE HOOK
AJQT*JRETAINING DEVICE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION BETWEEN THE EXTREME ENDS OF THE RETAINING DEVICE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJQTJAA2.0*;AJQTJAA2.0$$JAA2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
MARK*GSPECIAL MARKINGS
MARKINGS INCLUDED ON AN ITEM FOR THE PURPOSE OF OFFERING INSTRUCTIONS OR WARNINGS OR TO INDICATE THE PURPOSE, FUNCTION, OR APPLICATION OF THE ITEM. EXCLUDES MANUFACTURER'S PART NUMBERS, SYMBOLS, OR THE LIKE.
Enter clear text.
(MARKGCLEARTEXT)
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDAME*;CBBLDAMF$$DAMA*)
Table 1
Reply Code (AN47)Reply
AMKAIR VALVE
AMLAIR VALVE CAP
AMFANTISYPHONING
AMJBAR
AMBBLEEDER SCREW
AMDBREATHER HOLE
AMCFIRE BAFFLE
ALZFUSIBLE SAFETY PLUG
ALYINTEGRAL VACUUM RELIEF VALVE
AMNLEFT HAND THREAD
AMAPIPE PLUG
AMESCREEN
ALXSEAL
ALASUBMERSIBLE
AMGSURGE RESISTANT
AMHTAMPER PROOF
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
Table 1
Reply Code (AC28)Reply
ASPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
BSTANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
CDRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
Table 1
Reply Code (AN62)Reply
VFEDERAL MOTOR VEHICLE SAFETY STANDARD
FFLAMMABILITY STANDARD
SGOVERNMENT SPECIFICATION
TGOVERNMENT STANDARD
UINTERNATIONAL STD/SPEC
DMANUFACTURERS SOURCE CONTROL
RMANUFACTURERS SPECIFICATION
NMANUFACTURERS SPECIFICATION CONTROL
MMANUFACTURERS STANDARD
BNATIONAL STD/SPEC
APROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
PPROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
Table 1
Reply Code (AD08)Reply
ALALLOY
BEANNEALED
ANANNEX
APAPPENDIX
ACAPPLICABILITY CLASS
ARARRANGEMENT
ASASSEMBLY
ABASSORTMENT
BFBOND
BXBOX
CYCAPACITY
CACASE
CTCATEGORY
CFCIRCUMFERENCE
CLCLASS
CECODE
CRCOLOR
CCCOMBINATION CODE
CNCOMPONENT
CPCOMPOSITION
CMCOMPOUND
CDCONDITION
AVCONFIGURATION
CSCONSTRUCTION
BGCORE CONDITION
CBCUT OFF
AMDELAY CLASS
DEDESIGN
DGDESIGNATOR
DWDRAWING NUMBER
DUDUPLEX
EGEDGE
ENEND
FYFAMILY
FGFIGURE
AKFILE NUMBER
FNFINISH
FBFLAVOR
BHFLUX PERCENTAGE
FMFORM
FAFORMULA
AJGAGE STOCK NUMBER
GRGRADE
GAGRADUATION
AXGRANULES
AYGRIT
GBGROUND
GPGROUP
HAHEAVY DUTY
BAIMAGE COLOR
NSINSERT
TMITEM
KDKIND
KTKIT
LGLENGTH
LVLEVEL
LTLIMIT
MKMARK
AAMARKER
ADMASK APERTURE
MLMATERIAL
BBMAXIMUM DENSITY
TAMEDIUM TEMPER
MHMESH
MEMETHOD
BCMINIMUM DENSITY
MDMODEL
MTMOUNTING
AQNATURAL
AUNON-DELAY CLASS
NRNUMBER
BLOUTFIT NUMBER
PAPARAGRAPH
PTPART
PNPATTERN
PCPHYSICAL CONDITION
PSPIECE
PLPLAN
PRPOINT
PDPOLISHED
PBPRESSURE RATING
QAQUALITY
QBQUENCHED
RNRANGE
AERAPID
RTRATING
RFREFERENCE NUMBER
RAREGULAR DUTY
BJRMA FLUX
SJSALIENT CHARACTERISTICS
SCSCHEDULE
SBSECTION
SLSELECTION
BDSERIALIZED
SESERIES
SVSERVICE
SXSET
SASHADE
SHSHAPE
SGSHEET
SZSIZE
AGSLOW
TCSOFT TEMPER
SKSOURCE
PZSPECIES
SQSPECIFICATION SHEET
SDSPEED
AWSTANDARD
SRSTRAIGHT
STSTYLE
SSSUBCLASS
SFSUBFORM
SPSUBTYPE
BKSUPPORT
SNSURFACE CONDITION
SYSYMBOL
SMSYSTEM
TBTABLE
TNTANNAGE
TPTEMPER
TXTEXTURE
TKTHICKNESS
TTTREATMENT
TRTRIM
TYTYPE
YNUNIT
AZUNSERIALIZED
VAVARIETY
WTWEIGHT
WDWIDTH
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
Table 1
Reply Code (AN58)Reply
AADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCF2.0*)
Table 1
Reply Code (AN76)Reply
CFCUBIC FEET
CMCUBIC METERS
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)