An item that controls the flow of a fluid by rotation of a ported plug within a suitable ported seat. It must not have any lubrication other than from the fluid controlled, nor contain any nonmetallic seal between plug and seat. See also VALVE, SEATLESS and VALVE, PLUG.
ISAC Reply 3AEE added to MRC AWLS.
ISAC Reply 3AET added to MRC AWLS.
ISAC Reply 3AEU added to MRC AWLS.
ISAC Reply 3AEX added to MRC AWLS.
ISAC Reply 3AIB added to MRC AWLS.
ISAC Reply 3HOU added to MRC AWLS.
ISAC Reply 1A deleted from MRC AWLS.
ISAC Reply 1B deleted from MRC AWLS.
ISAC Reply 1C deleted from MRC AWLS.
ISAC Reply 1D deleted from MRC AWLS.
ISAC Reply 1E deleted from MRC AWLS.
ISAC Reply 3AAT added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3AEF added to MRC MATT.
ISAC Reply 3AYK added to MRC MATT.
ISAC Reply 3BAU added to MRC MATT.
ISAC Reply 3BCM added to MRC MATT.
ISAC Reply 3BKI added to MRC MATT.
ISAC Reply 3DLU added to MRC MATT.
ISAC Reply 3DTD added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 1A deleted from MRC MATT.
ISAC Reply 1B deleted from MRC MATT.
ISAC Reply 1C deleted from MRC MATT.
ISAC Reply 1D deleted from MRC MATT.
ISAC Reply 1E deleted from MRC MATT.
ISAC Reply 1F deleted from MRC MATT.
ISAC Reply 1X deleted from MRC MATT.
ISAC Reply 3AAT added to MRC MDCL.
ISAC Reply 3AEE added to MRC MDCL.
ISAC Reply 3AEF added to MRC MDCL.
ISAC Reply 3AYK added to MRC MDCL.
ISAC Reply 3BAU added to MRC MDCL.
ISAC Reply 3BCM added to MRC MDCL.
ISAC Reply 3BKI added to MRC MDCL.
ISAC Reply 3DLU added to MRC MDCL.
ISAC Reply 3DTD added to MRC MDCL.
ISAC Reply 3HOU added to MRC MDCL.
ISAC Reply 1A deleted from MRC MDCL.
ISAC Reply 1B deleted from MRC MDCL.
ISAC Reply 1C deleted from MRC MDCL.
ISAC Reply 1D deleted from MRC MDCL.
ISAC Reply 1E deleted from MRC MDCL.
ISAC Reply 1F deleted from MRC MDCL.
ISAC Reply 1X deleted from MRC MDCL.
ISAC Reply 3AEE added to MRC MEDA.
ISAC Reply 3DQX added to MRC MEDA.
ISAC Reply 3DQY added to MRC MEDA.
ISAC Reply 3DQZ added to MRC MEDA.
ISAC Reply 3DRA added to MRC MEDA.
ISAC Reply 3DRB added to MRC MEDA.
ISAC Reply 3DRC added to MRC MEDA.
ISAC Reply 3HOU added to MRC MEDA.
ISAC Reply 1A deleted from MRC MEDA.
ISAC Reply 1B deleted from MRC MEDA.
ISAC Reply 1C deleted from MRC MEDA.
ISAC Reply 1D deleted from MRC MEDA.
ISAC Reply 1E deleted from MRC MEDA.
ISAC Reply 1F deleted from MRC MEDA.
ISAC Reply 3AEE added to MRC CQGM.
ISAC Reply 3DQX added to MRC CQGM.
ISAC Reply 3DQY added to MRC CQGM.
ISAC Reply 3DQZ added to MRC CQGM.
ISAC Reply 3DRA added to MRC CQGM.
ISAC Reply 3DRB added to MRC CQGM.
ISAC Reply 3DRC added to MRC CQGM.
ISAC Reply 3HOU added to MRC CQGM.
ISAC Reply 1A deleted from MRC CQGM.
ISAC Reply 1B deleted from MRC CQGM.
ISAC Reply 1C deleted from MRC CQGM.
ISAC Reply 1D deleted from MRC CQGM.
ISAC Reply 1E deleted from MRC CQGM.
ISAC Reply 1F deleted from MRC CQGM.
ISAC Reply 3AEE added to MRC AEHZ.
ISAC Reply 3DQX added to MRC AEHZ.
ISAC Reply 3DQY added to MRC AEHZ.
ISAC Reply 3DQZ added to MRC AEHZ.
ISAC Reply 3DRA added to MRC AEHZ.
ISAC Reply 3DRB added to MRC AEHZ.
ISAC Reply 3DRC added to MRC AEHZ.
ISAC Reply 3HOU added to MRC AEHZ.
ISAC Reply 1A deleted from MRC AEHZ.
ISAC Reply 1B deleted from MRC AEHZ.
ISAC Reply 1C deleted from MRC AEHZ.
ISAC Reply 1D deleted from MRC AEHZ.
ISAC Reply 1E deleted from MRC AEHZ.
ISAC Reply 1F deleted from MRC AEHZ.
ISAC Reply 3AEE added to MRC AHNC.
ISAC Reply 3AET added to MRC AHNC.
ISAC Reply 3AEU added to MRC AHNC.
ISAC Reply 3AEX added to MRC AHNC.
ISAC Reply 3AIB added to MRC AHNC.
ISAC Reply 3HOU added to MRC AHNC.
ISAC Reply 1A deleted from MRC AHNC.
ISAC Reply 1B deleted from MRC AHNC.
ISAC Reply 1C deleted from MRC AHNC.
ISAC Reply 1D deleted from MRC AHNC.
ISAC Reply 1E deleted from MRC AHNC.
ISAC Reply 3AEE added to MRC CQRB.
ISAC Reply 3AET added to MRC CQRB.
ISAC Reply 3AEU added to MRC CQRB.
ISAC Reply 3AEX added to MRC CQRB.
ISAC Reply 3HOU added to MRC CQRB.
ISAC Reply 1A deleted from MRC CQRB.
ISAC Reply 1B deleted from MRC CQRB.
ISAC Reply 1C deleted from MRC CQRB.
ISAC Reply 1D deleted from MRC CQRB.
ISAC Reply 1E deleted from MRC CQRB.
ISAC Reply 3AEE added to MRC CWBZ.
ISAC Reply 3AET added to MRC CWBZ.
ISAC Reply 3AEU added to MRC CWBZ.
ISAC Reply 3AEX added to MRC CWBZ.
ISAC Reply 3HOU added to MRC CWBZ.
ISAC Reply 1A deleted from MRC CWBZ.
ISAC Reply 1B deleted from MRC CWBZ.
ISAC Reply 1C deleted from MRC CWBZ.
ISAC Reply 1D deleted from MRC CWBZ.
ISAC Reply 1E deleted from MRC CWBZ.
ISAC Reply 3AEE added to MRC CTCJ.
ISAC Reply 3AEU added to MRC CTCJ.
ISAC Reply 3AEX added to MRC CTCJ.
ISAC Reply 3HOU added to MRC CTCJ.
ISAC Reply 1A deleted from MRC CTCJ.
ISAC Reply 1B deleted from MRC CTCJ.
ISAC Reply 1C deleted from MRC CTCJ.
ISAC Reply 1D deleted from MRC CTCJ.
ISAC Reply 1E deleted from MRC CTCJ.
ISAC Reply 3AEE added to MRC CWCK.
ISAC Reply 3AET added to MRC CWCK.
ISAC Reply 3AEU added to MRC CWCK.
ISAC Reply 3AEX added to MRC CWCK.
ISAC Reply 3HOU added to MRC CWCK.
ISAC Reply 1A deleted from MRC CWCK.
ISAC Reply 1B deleted from MRC CWCK.
ISAC Reply 1C deleted from MRC CWCK.
ISAC Reply 1D deleted from MRC CWCK.
ISAC Reply 1E deleted from MRC CWCK.
ISAC Reply 3AEE added to MRC AKGG.
ISAC Reply 3AET added to MRC AKGG.
ISAC Reply 3AEU added to MRC AKGG.
ISAC Reply 3AEX added to MRC AKGG.
ISAC Reply 3HOU added to MRC AKGG.
ISAC Reply 1A deleted from MRC AKGG.
ISAC Reply 1B deleted from MRC AKGG.
ISAC Reply 1C deleted from MRC AKGG.
ISAC Reply 1D deleted from MRC AKGG.
ISAC Reply 1E deleted from MRC AKGG.
ISAC Reply 3AEE added to MRC AKGF.
ISAC Reply 3AET added to MRC AKGF.
ISAC Reply 3AEU added to MRC AKGF.
ISAC Reply 3AEX added to MRC AKGF.
ISAC Reply 3HOU added to MRC AKGF.
ISAC Reply 1A deleted from MRC AKGF.
ISAC Reply 1B deleted from MRC AKGF.
ISAC Reply 1C deleted from MRC AKGF.
ISAC Reply 1D deleted from MRC AKGF.
ISAC Reply 1E deleted from MRC AKGF.
ISAC Reply 3AEE added to MRC AECS.
ISAC Reply 3AET added to MRC AECS.
ISAC Reply 3AEU added to MRC AECS.
ISAC Reply 3AEX added to MRC AECS.
ISAC Reply 3HOU added to MRC AECS.
ISAC Reply 1A deleted from MRC AECS.
ISAC Reply 1B deleted from MRC AECS.
ISAC Reply 1C deleted from MRC AECS.
ISAC Reply 1D deleted from MRC AECS.
ISAC Reply 1E deleted from MRC AECS.
ISAC Reply 3AEE added to MRC CWCQ.
ISAC Reply 3AET added to MRC CWCQ.
ISAC Reply 3AEU added to MRC CWCQ.
ISAC Reply 3AEX added to MRC CWCQ.
ISAC Reply 3AIB added to MRC CWCQ.
ISAC Reply 3HOU added to MRC CWCQ.
ISAC Reply 1A deleted from MRC CWCQ.
ISAC Reply 1B deleted from MRC CWCQ.
ISAC Reply 1C deleted from MRC CWCQ.
ISAC Reply 1D deleted from MRC CWCQ.
ISAC Reply 1E deleted from MRC CWCQ.
ISAC Reply 3AEE added to MRC CWCT.
ISAC Reply 3AET added to MRC CWCT.
ISAC Reply 3AEU added to MRC CWCT.
ISAC Reply 3AEX added to MRC CWCT.
ISAC Reply 3AIB added to MRC CWCT.
ISAC Reply 3HOU added to MRC CWCT.
ISAC Reply 1A deleted from MRC CWCT.
ISAC Reply 1B deleted from MRC CWCT.
ISAC Reply 1C deleted from MRC CWCT.
ISAC Reply 1D deleted from MRC CWCT.
ISAC Reply 1E deleted from MRC CWCT.
ISAC Reply 3AEE added to MRC CWCY.
ISAC Reply 3AET added to MRC CWCY.
ISAC Reply 3HOU added to MRC CWCY.
ISAC Reply 1A deleted from MRC CWCY.
ISAC Reply 1B deleted from MRC CWCY.
ISAC Reply 1C deleted from MRC CWCY.
ISAC Reply 1D deleted from MRC CWCY.
ISAC Reply 1E deleted from MRC CWCY.
ISAC Reply 3AEE added to MRC CWDC.
ISAC Reply 3AEU added to MRC CWDC.
ISAC Reply 3HOU added to MRC CWDC.
ISAC Reply 1A deleted from MRC CWDC.
ISAC Reply 1B deleted from MRC CWDC.
ISAC Reply 1C deleted from MRC CWDC.
ISAC Reply 1D deleted from MRC CWDC.
ISAC Reply 1E deleted from MRC CWDC.
ISAC Reply 3AEE added to MRC AAGW.
ISAC Reply 3AET added to MRC AAGW.
ISAC Reply 3HOU added to MRC AAGW.
ISAC Reply 1A deleted from MRC AAGW.
ISAC Reply 1B deleted from MRC AAGW.
ISAC Reply 1C deleted from MRC AAGW.
ISAC Reply 1D deleted from MRC AAGW.
ISAC Reply 1E deleted from MRC AAGW.
ISAC Reply 3AEE added to MRC ADBQ.
ISAC Reply 3AET added to MRC ADBQ.
ISAC Reply 3AEX added to MRC ADBQ.
ISAC Reply 3AIB added to MRC ADBQ.
ISAC Reply 3HOU added to MRC ADBQ.
ISAC Reply 1A deleted from MRC ADBQ.
ISAC Reply 1B deleted from MRC ADBQ.
ISAC Reply 1C deleted from MRC ADBQ.
ISAC Reply 1D deleted from MRC ADBQ.
ISAC Reply 1E deleted from MRC ADBQ.
ISAC Reply 3AEE added to MRC CWDF.
ISAC Reply 3AET added to MRC CWDF.
ISAC Reply 3AEU added to MRC CWDF.
ISAC Reply 3AEX added to MRC CWDF.
ISAC Reply 3AIB added to MRC CWDF.
ISAC Reply 3HOU added to MRC CWDF.
ISAC Reply 1A deleted from MRC CWDF.
ISAC Reply 1B deleted from MRC CWDF.
ISAC Reply 1C deleted from MRC CWDF.
ISAC Reply 1D deleted from MRC CWDF.
ISAC Reply 1E deleted from MRC CWDF.
ISAC Reply 3AEE added to MRC CWDW.
ISAC Reply 3AET added to MRC CWDW.
ISAC Reply 3AEU added to MRC CWDW.
ISAC Reply 3AEX added to MRC CWDW.
ISAC Reply 3AIB added to MRC CWDW.
ISAC Reply 3HOU added to MRC CWDW.
ISAC Reply 1A deleted from MRC CWDW.
ISAC Reply 1B deleted from MRC CWDW.
ISAC Reply 1C deleted from MRC CWDW.
ISAC Reply 1D deleted from MRC CWDW.
ISAC Reply 1E deleted from MRC CWDW.
ISAC Reply 3AEE added to MRC AAAR.
ISAC Reply 3AET added to MRC AAAR.
ISAC Reply 3AEU added to MRC AAAR.
ISAC Reply 3AEX added to MRC AAAR.
ISAC Reply 3AIB added to MRC AAAR.
ISAC Reply 3HOU added to MRC AAAR.
ISAC Reply 1A deleted from MRC AAAR.
ISAC Reply 1B deleted from MRC AAAR.
ISAC Reply 1C deleted from MRC AAAR.
ISAC Reply 1D deleted from MRC AAAR.
ISAC Reply 1E deleted from MRC AAAR.
ISAC Reply 3AEE added to MRC CWFD.
ISAC Reply 3AET added to MRC CWFD.
ISAC Reply 3AEU added to MRC CWFD.
ISAC Reply 3AEX added to MRC CWFD.
ISAC Reply 3AIB added to MRC CWFD.
ISAC Reply 3HOU added to MRC CWFD.
ISAC Reply 1A deleted from MRC CWFD.
ISAC Reply 1B deleted from MRC CWFD.
ISAC Reply 1C deleted from MRC CWFD.
ISAC Reply 1D deleted from MRC CWFD.
ISAC Reply 1E deleted from MRC CWFD.
ISAC Reply 3AEE added to MRC THSD.
ISAC Reply 3AET added to MRC THSD.
ISAC Reply 3AEU added to MRC THSD.
ISAC Reply 3AEX added to MRC THSD.
ISAC Reply 3AIB added to MRC THSD.
ISAC Reply 3HOU added to MRC THSD.
ISAC Reply 1A deleted from MRC THSD.
ISAC Reply 1B deleted from MRC THSD.
ISAC Reply 1C deleted from MRC THSD.
ISAC Reply 1D deleted from MRC THSD.
ISAC Reply 1E deleted from MRC THSD.
ISAC Reply 3AEE added to MRC CQJX.
ISAC Reply 3AET added to MRC CQJX.
ISAC Reply 3AEU added to MRC CQJX.
ISAC Reply 3AEX added to MRC CQJX.
ISAC Reply 3AIB added to MRC CQJX.
ISAC Reply 3HOU added to MRC CQJX.
ISAC Reply 1A deleted from MRC CQJX.
ISAC Reply 1B deleted from MRC CQJX.
ISAC Reply 1C deleted from MRC CQJX.
ISAC Reply 1D deleted from MRC CQJX.
ISAC Reply 1E deleted from MRC CQJX.
ISAC Reply 3AEE added to MRC CMLP.
ISAC Reply 3AET added to MRC CMLP.
ISAC Reply 3AEU added to MRC CMLP.
ISAC Reply 3AEX added to MRC CMLP.
ISAC Reply 3AIB added to MRC CMLP.
ISAC Reply 3HOU added to MRC CMLP.
ISAC Reply 1A deleted from MRC CMLP.
ISAC Reply 1B deleted from MRC CMLP.
ISAC Reply 1C deleted from MRC CMLP.
ISAC Reply 1D deleted from MRC CMLP.
ISAC Reply 1E deleted from MRC CMLP.
ISAC Reply 3AEE added to MRC AAJD.
ISAC Reply 3AET added to MRC AAJD.
ISAC Reply 3AEU added to MRC AAJD.
ISAC Reply 3AEX added to MRC AAJD.
ISAC Reply 3AIB added to MRC AAJD.
ISAC Reply 3HOU added to MRC AAJD.
ISAC Reply 1A deleted from MRC AAJD.
ISAC Reply 1B deleted from MRC AAJD.
ISAC Reply 1C deleted from MRC AAJD.
ISAC Reply 1D deleted from MRC AAJD.
ISAC Reply 1E deleted from MRC AAJD.
ISAC Reply 3AEE added to MRC CQQR.
ISAC Reply 3AET added to MRC CQQR.
ISAC Reply 3AEU added to MRC CQQR.
ISAC Reply 3AEX added to MRC CQQR.
ISAC Reply 3AIB added to MRC CQQR.
ISAC Reply 3HOU added to MRC CQQR.
ISAC Reply 1A deleted from MRC CQQR.
ISAC Reply 1B deleted from MRC CQQR.
ISAC Reply 1C deleted from MRC CQQR.
ISAC Reply 1D deleted from MRC CQQR.
ISAC Reply 1E deleted from MRC CQQR.
ISAC Reply 3AEE added to MRC AAJF.
ISAC Reply 3AET added to MRC AAJF.
ISAC Reply 3AEU added to MRC AAJF.
ISAC Reply 3AEX added to MRC AAJF.
ISAC Reply 3AIB added to MRC AAJF.
ISAC Reply 3HOU added to MRC AAJF.
ISAC Reply 1A deleted from MRC AAJF.
ISAC Reply 1B deleted from MRC AAJF.
ISAC Reply 1C deleted from MRC AAJF.
ISAC Reply 1D deleted from MRC AAJF.
ISAC Reply 1E deleted from MRC AAJF.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED16991*)
ADQSLFLOW STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE FLOW.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(ADQSLA26)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| BU10131 | A1 | TWO WAY TWO PORT 90 DEGREE PLUG TURN |
| BU10140 | A10 | THREE-WAY TWO PORT 90 DEGREE PLUG TURN |
| BU10141 | A11 | THREE-WAY TWO PORT 180 DEGREE PLUG TURN |
| BU10142 | A12 | THREE-WAY TWO PORT 180 DEGREE PLUG TURN |
| BU10143 | A13 | THREE-WAY THREE PORT 90 DEGREE PLUG TURN |
| BU10144 | A14 | THREE-WAY THREE PORT 180 DEGREE PLUG TURN |
| BU10145 | A15 | THREE-WAY THREE PORT 180 DEGREE PLUG TURN |
| BU10146 | A16 | THREE-WAY THREE PORT 90 DEGREE PLUG TURN |
| BU10147 | A17 | THREE-WAY THREE PORT 90 DEGREE PLUG TURN |
| BU10148 | A18 | THREE-WAY THREE PORT 90 DEGREE PLUG TURN |
| BU10149 | A19 | THREE-WAY THREE PORT 180 DEGREE PLUG TURN |
| BU10132 | A2 | TWO WAY TWO PORT BOTTOM OUTLET 90 DEGREE PLUG TURN |
| BU10150 | A20 | THREE-WAY THREE PORT 180 DEGREE PLUG TURN |
| BU10151 | A21 | THREE-WAY THREE PORT 360 DEGREE PLUG TURN |
| BU10152 | A22 | THREE-WAY THREE PORT 270 DEGREE PLUG TURN |
| BU10153 | A23 | FOUR-WAY ONE PORT BOTTOM OUTLET 360 DEGREE PLUG TURN |
| BU10154 | A24 | THREE-WAY TWO PORT BOTTOM OUTLET 90 DEGREE PLUG TURN |
| BU10176 | A25 | THREE-WAY TWO PORT 90 DEGREE PLUG TURN |
| BU10155 | A26 | THREE-WAY THREE PORT BOTTOM OUTLET 90 DEGREE PLUG TURN |
| BU10156 | A27 | FOUR-WAY FOUR PORT 90 DEGREE PLUG TURN |
| BU10157 | A28 | FOUR-WAY TWO PORT BOTTOM OUTLET 360 DEGREE PLUG TURN |
| BU10158 | A29 | FOUR-WAY TWO PORT BOTTOM OUTLET 360 DEGREE PLUG TURN |
| BU10133 | A3 | TWO WAY TWO PORT BOTTOM OUTLET 90 DEGREE PLUG TURN |
| BU10159 | A30 | FOUR-WAY THREE PORT BOTTOM OUTLET 90 DEGREE PLUG TURN |
| BU10160 | A31 | THREE-WAY TWO PORT |
| BU10161 | A32 | THREE-WAY THREE PORT |
| BU10162 | A33 | TWO WAY TWO PORT 360 DEGREE PLUG TURN |
| BU10163 | A34 | THREE W-WAY TWO PORT 360 DEGREE PLUG TURN |
| BU10164 | A35 | ONE-WAY ONE-PORT BOTTOM OUTLET 90 DEGREE PLUG TURN |
| BU10134 | A4 | TWO-WAY THREE PORT BOTTOM OUTLET 90 DEGREE PLUG TURN |
| BU10135 | A5 | TWO-WAY ONE PORT BOTTOM OUTLET 360 DEGREE PLUG TURN |
| BU10136 | A6 | THREE-WAY ONE PORT BOTTOM OUTLET 360 DEGREE PLUG TURN |
| BU10137 | A7 | TWO-WAY THREE PORT BOTTOM OUTLET 360 DEGREE PLUG TURN |
| BU10138 | A8 | TWO-WAY TWO PORT BOTTOM OUTLET 360 DEGREE PLUG TURN |
| BU10139 | A9 | TWO-WAY TWO PORT BOTTOM OUTLET 360 DEGREE PLUG TURN |
AQLRDVALVE OPERATION METHOD
THE MEANS USED TO CONTROL THE OPERATION OF THE VALVE.
Enter the applicable reply code from the table below
(AQLRDAAG*;AQLRDAAF$DAAB*)
| Table 1 |
| Reply Code (AC58) | Reply |
| AAB | AIR |
| AAC | AUTOMATIC |
| AAD | ELECTRIC MOTOR |
| AAE | HYDRAULIC |
| AAF | MANUAL |
| AAG | SOLENOID |
IF STYLE/REPLY CODE(s) AA WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (AHNC and CWFD and THSD)
IF STYLE/REPLY CODE(s) BE, AB OR AD WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (AHNC and CWFD)
IF STYLE/REPLY CODE(s) AC, AE, AG, AP, AR, AV, AW, WR, WS OR WY WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (AHNC and THSD)
IF STYLE/REPLY CODE(s) BD, AF OR AJ WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (AHNC and AAAR)
IF STYLE/REPLY CODE(s) BF WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (CTCJ and CWDF)
IF STYLE/REPLY CODE(s) AQ OR WZ WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (AHNC)
IF STYLE/REPLY CODE(s) AS WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (AHNC and CWDW)
AWLSDCONNECTION TYPE
INDICATES THE TYPE OF CONNECTION/S/.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AWLS3AIBDWY*;AWLS3AIBDWY$DAJ*;AWLS3AIBDWY$$DAJ*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB76) | Reply |
| BD | BUTT WELD PIPE |
| BE | BUTT WELD TUBE |
| BF | FLANGE |
| WY | THREADED CARTRIDGE |
| AW | THREADED EXTERNAL BOSS |
| WR | THREADED EXTERNAL GAS FITTING |
| AR | THREADED EXTERNAL HOSE |
| AG | THREADED EXTERNAL PIPE |
| AC | THREADED EXTERNAL TUBE |
| AV | THREADED INTERNAL BOSS |
| WS | THREADED INTERNAL GAS FITTING |
| AP | THREADED INTERNAL HOSE |
| AE | THREADED INTERNAL PIPE |
| AA | THREADED INTERNAL TUBE |
| WZ | UNTHREADED CARTRIDGE |
| AS | UNTHREADED EXTERNAL HOSE |
| AJ | UNTHREADED EXTERNAL PIPE |
| AD | UNTHREADED EXTERNAL TUBE |
| AQ | UNTHREADED INTERNAL HOSE |
| AF | UNTHREADED INTERNAL PIPE |
| AB | UNTHREADED INTERNAL TUBE |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3DTDDPCAF00*;MATT3DTDDPCAF00$DPCA000*;MATT3DTDDPCAF00$$DPCA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3AEF | HANDLE |
| 3AYK | GASKET |
| 3BAU | SEAT |
| 3BCM | FLOW CONTROL DEVICE |
| 3BKI | STEM |
| 3DLU | PACKING |
| 3DTD | BODY LINING |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL7075 | ALUMINUM ALLOY 7075 |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CU0080 | COPPER ALLOY 268 |
| CU0091 | COPPER ALLOY 360 |
| CU0092 | COPPER ALLOY 377 |
| CU0172 | COPPER ALLOY 836 |
| CU0202 | COPPER ALLOY 922 |
| FEA000 | IRON |
| FEB000 | IRON CAST |
| FEC000 | IRON MALLEABLE |
| NLB000 | NICKEL ALLOY |
| PCA000 | PLASTIC |
| PCAC00 | PLASTIC POLYPROPYLENE |
| PCAF00 | PLASTIC POLYTETRAFLUOROETHYLENE |
| RCE000 | RUBBER |
| RC0019 | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| STA000 | STEEL |
| ST0303 | STEEL COMP 303 |
| ST0316 | STEEL COMP 316 |
| ST4140 | STEEL COMP 4140 |
| ST0107 | STEEL COMP 440C |
| STB000 | STEEL CORROSION RESISTING |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3AEF | HANDLE |
| 3AYK | GASKET |
| 3BAU | SEAT |
| 3BCM | FLOW CONTROL DEVICE |
| 3BKI | STEM |
| 3DLU | PACKING |
| 3DTD | BODY LINING |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(SFTTDANA000*;SFTTDCDA000$DPSA000*;SFTTDCDA000$$DPSA000*)
| Table 1 |
| Reply Code (SF01) | Reply |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CRA000 | CHROMIUM |
| PNA000 | PAINT |
| PSA000 | PASSIVATE |
| ZNA000 | ZINC |
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
MEDA*DMEDIA FOR WHICH DESIGNED
THE TYPE OF MEDIA FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MEDA3DQYDACK*;MEDA3DQYDACK$DACP*;MEDA3DQYDACK$$DACP*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3DQY | FIRST RESPONSE |
| 3DQZ | SECOND RESPONSE |
| 3DRA | THIRD RESPONSE |
| 3DRB | FOURTH RESPONSE |
| 3DRC | FIFTH RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN91) | Reply |
| AAE | AIR |
| AAL | BUTANE |
| AAM | CARBON DIOXIDE |
| AAY | FUEL/OIL, HYDROCARBON |
| ABA | GAS, INERT |
| ABD | GAS, NATURAL |
| AGT | HYDRAULIC FLUID, MINERAL BASE |
| ABB | LIQUID, INGESTED |
| ACJ | OIL |
| ACE | OIL, HYDRAULIC |
| ACK | PROPANE |
| ABP | STEAM |
| ABS | WATER, FRESH |
| ABT | WATER, SALT |
| ACP | WATER-OIL-GAS |
CQGM*JMAXIMUM OPERATING PRESSURE
THE MAXIMUM PRESSURE AT WHICH THE ITEM IS RATED FOR OPERATION.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQGM3DRCJB2.0*;CQGM3DRCJB2.0$JB2.0*;CQGM3DRCJB2.0$$JB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3DQY | FIRST RESPONSE |
| 3DQZ | SECOND RESPONSE |
| 3DRA | THIRD RESPONSE |
| 3DRB | FOURTH RESPONSE |
| 3DRC | FIFTH RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN71) | Reply |
| B | BAR |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
AEHZ*JMAXIMUM OPERATING TEMP
THE MAXIMUM TEMPERATURE AT WHICH THE ITEM IS RATED TO OPERATE FOR AN EXTENDED PERIOD OF TIME.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEHZ3DQZJC2.0*;AEHZ3DQZJC2.0$JC2.0*;AEHZ3DQZJC2.0$$JC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3DQY | FIRST RESPONSE |
| 3DQZ | SECOND RESPONSE |
| 3DRA | THIRD RESPONSE |
| 3DRB | FOURTH RESPONSE |
| 3DRC | FIFTH RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
IF STYLE/REPLY CODE(s) B7, B11, B12, B42, B43, B45, B47, B1A, B1B, B2A, B2B, B10A, B10B, B41A, B41B OR B41C WERE ENTERED FOR MRC AHNC, YOU MUST ANSWER MRC (CQRB)
IF STYLE/REPLY CODE(s) B6, B8, B44, B52, B54, B51A OR B51B WERE ENTERED FOR MRC AHNC, YOU MUST ANSWER MRC (CWBZ)
AHNC*LCONNECTION STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE CONNECTION.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(AHNC3AEELB63*;AHNC3AEELB63$LB43*;AHNC3AEELB63$$LB43*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| DR03481 | B10A | INVERTED FLARE (TUBE) |
| DR03482 | B10B | INVERTED FLARE (PIPE) |
| BU10175 | B11 | DOUBLE COMPRESSION (TUBE) |
| BU10177 | B12 | HIGH PRESSURE FLARE (TUBE) |
| DR00935 | B1A | SWIVEL NUT, INVERTED FLARE (TUBE) |
| DR00936 | B1B | SWIVEL NUT, INVERTED FLARE (PIPE) |
| DR00956 | B20A | SOCKET (TUBE) |
| DR00957 | B20B | SOCKET (PIPE) |
| DR00958 | B21A | STREAMLINED WITH ONE BRAZING RING (TUBE) |
| DR00959 | B21B | STREAMLINED WITH ONE BRAZING RING (PIPE) |
| DR00960 | B22A | STREAM LINEDD WITH TWO BRAZING RING (TUBE) |
| DR00961 | B22B | STREAMLINED WITH TWO BRAZING RING (PIPE) |
| DR00962 | B23A | REDUCED SOCKET (TUBE) |
| DR00963 | B23B | REDUCED SOCKET (PIPE) |
| DR00964 | B24A | REDUCED SOCKET WITH ONE BRAZING RING (TUBE) |
| DR00965 | B24B | REDUCED SOCKET WITH ONE BRAZING RING (PIPE) |
| DR00966 | B25A | REDUCED GASKET SEAL (TUBE) |
| DR00967 | B25B | REDUCED GASKET SEAL (PIPE) |
| BU10184 | B26 | PLAIN (TUBE) |
| BU10185 | B27 | CRIMPED (TUBE) |
| BU10186 | B28 | GROOVED INSIDE |
| BU10187 | B29 | HOSE SOCKET (HOSE) |
| DR00937 | B2A | SWIVEL NUT, FLARE (TUBE) |
| DR00938 | B2B | SWIVEL NUT, FLARE (PIPE) |
| DR00968 | B30A | SOCKET WITH BRAZING RING (TUBE) |
| DR00969 | B30B | SOCKET WITH BRAZING RING (PIPE) |
| BU10189 | B31 | GASKET SEAL (PIPE) |
| BU10190 | B32 | BELL (PIPE) |
| DR00939 | B3A | SWIVEL NUT, GASKET SEAL (TUBE) |
| DR00940 | B3B | SWIVEL NUT, GASKET SEAL (PIPE) |
| DR00941 | B3C | SWIVEL NUT, GASKET SEAL (HOSE) |
| DR00942 | B3D | SWIVEL NUT, GASKET SEAL (GAS FITTING) |
| BU10168 | B4 | GASKET SEAL (BOSS) |
| BU10191 | B40 | GASKET SEAL COMPRESSION (TUBE) |
| DR00970 | B41A | INVERTED FLARE (TUBE) |
| DR00971 | B41B | INVERTED FLARE (PIPE) |
| DR00972 | B41C | INVERTED FLARE (GAS FITTING) |
| BU10193 | B42 | FLARED (TUBE) |
| BU10194 | B43 | EXTERNAL SEAT FOR GASKET SEAL (BOSS) |
| BU10195 | B44 | COMPRESSION (TUBE) |
| BU10196 | B45 | FLARELESS |
| DR00973 | B46A | PLAIN (TUBE) |
| DR00974 | B46B | PLAIN (PIPE) |
| DR00975 | B46C | PLAIN (HOSE) |
| DR00976 | B46D | PLAIN (SCREW-IN CARTRIDGE) |
| BU10198 | B47 | SWIVEL NUT INVERTED FLARE (TUBE) |
| DR01397 | B48A | SWIVEL, PLAIN (TUBE) |
| DR01398 | B48B | SWIVEL, PLAIN (PIPE) |
| DR01399 | B48C | SWIVEL, PLAIN (HOSE) |
| DR01400 | B49A | GASKET SEAL (TUBE) |
| DR01401 | B49B | GASKET SEAL (PIPE) |
| DR01402 | B49C | GASKET SEAL (HOSE) |
| DR01403 | B49D | GASKET SEAL (GAS FITTIG) |
| BU10201 | B50 | EXTERNAL SEAT FOR GASKET SEAL (BOSS) |
| DR01404 | B51A | SWIVEL NUT, FLARED (TUBE) |
| DR01405 | B51B | SWIVEL NUT, FLARED (PIPE) |
| BU10203 | B52 | SWIVEL NUT, DOUBLE COMPRESSION (TUBE) |
| BU10204 | B53 | DOUBLE THREADED SECTION BOSS FITTING GASKET WITH LOCKNUT SEALING, BOSS |
| BU10205 | B54 | FLARED (TUBE) |
| DR00943 | B5A | FLARE (TUBE) |
| DR00955 | B5B | FLARE (GAS FITTING) |
| BU10170 | B6 | SWIVEL NUT, COMPRESSION (TUBE) |
| DR01406 | B60A | PLAIN (TUBE) |
| DR01407 | B60B | PLAIN (PIPE) |
| DR01408 | B60C | PLAIN (HOSE) |
| DR01409 | B61A | GROOVED (TUBE) |
| DR01410 | B61B | GROOVED (PIPE) |
| DR01411 | B61C | GROOVED (DROP-IN CARTRIDGE) |
| BU10208 | B62 | BEADED (HOSE) |
| BU10209 | B63 | BEADED (HOSE) |
| DR01412 | B64A | PLAIN BEVELED (PIPE) |
| DR01413 | B64B | PLAIN BEVELED (HOSE) |
| BU10211 | B65 | BARBED-BEADED (HOSE) |
| BU10212 | B66 | BARBED-BEADED (HOSE) |
| BU10213 | B67 | MULTI-GROOVED (HOSE) |
| BU10171 | B7 | SWIVEL NUT, FLARELESS (TUBE) |
| DR01414 | B70A | BEVELED (TUBE) |
| DR01415 | B70B | BEVELED (PIPE) |
| DR00418 | B71A | BEVELED (TUBE) |
| DR00419 | B71B | BEVELED (PIPE) |
| DR00788 | B72A | BEVELED (TUBE) |
| DR00789 | B72B | BEVELED (PIPE) |
| BU10172 | B8 | SWIVEL NUT, (GAS FITTING) |
| BU10173 | B9 | PLAIN, OPTIONAL END (PIPE) |
CQRB*JSEAT ANGLE
THE ANGLE OF THE END SURFACE UPON WHICH THE MATED SURFACE SEATS.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQRB3AEUJR2.0*;CQRB3AEUJR2.0$JR2.0*;CQRB3AEUJR2.0$$JR2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP38) | Reply |
| D | DEGREES |
| R | RADIANS |
CWBZ*JSEAT NOMINAL RADIUS
THE NOMINAL RADIUS OF THE END SURFACE UPON WHICH THE MATED SURFACE SEATS.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWBZ3AETJA2.0*;CWBZ3AETJA2.0$JA2.0*;CWBZ3AETJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
IF STYLE/REPLY CODE(s) BKN, BKP OR BKS WERE ENTERED FOR MRC CTCJ, YOU MUST ANSWER MRC (AECS and CWCQ and AAGW and CWCK and CWCT)
IF YOU ANSWER MRC CTCJ, YOU MUST ANSWER MRC (AAGW and CWCK)
IF STYLE/REPLY CODE(s) APL WERE ENTERED FOR MRC CTCJ, YOU MUST ANSWER MRC (ADBQ and CWCK)
IF STYLE/REPLY CODE(s) BKR WERE ENTERED FOR MRC CTCJ, YOU MUST ANSWER MRC (CWCQ and AECS and CWCY and CWDC and AKGF and AKGG and CWCK)
IF STYLE/REPLY CODE(s) AND WERE ENTERED FOR MRC CTCJ, YOU MUST ANSWER MRC (CWCK and AKGG)
IF STYLE/REPLY CODE(s) BKQ OR BKT WERE ENTERED FOR MRC CTCJ, YOU MUST ANSWER MRC (CWCK and AECS and CWCQ and CWCT and AKGF and AKGG)
CTCJ*LFLANGE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE FLANGE.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(CTCJ3AEXLBKR*;CTCJ3AEXLBKR$LBKN*;CTCJ3AEXLBKR$$LBKN*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| BU10218 | AHH | HEXAGON |
| BU10223 | AND | RECTANGULAR (INCLUDES SQUARE) |
| BU10221 | APL | ROUND |
| BU10217 | BKN | HEXAGON WITH HOLES |
| BU10219 | BKP | OCTAGON WITH HOLES |
| BU10233 | BKQ | OVAL WITH HOLES |
| BU10232 | BKR | RECTANGULAR WITH HOLES (INCLUDES SQUARES) |
| BU10220 | BKS | ROUND WITH HOLES |
| BU10222 | BKT | TRIANGULAR WITH HOLES |
CWCK*JNOMINAL THICKNESS
A NOMINAL MEASUREMENT OF THE SMALLEST DIMENSION OF AN ITEM,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCK3AEUJA2.0*;CWCK3AEUJA2.0$JA2.0*;CWCK3AEUJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AKGG*JNOMINAL LENGTH
A NOMINAL MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKGG3AEUJA2.0*;AKGG3AEUJA2.0$JA2.0*;AKGG3AEUJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AKGF*JNOMINAL WIDTH
A NOMINAL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKGF3AEXJA2.0*;AKGF3AEXJA2.0$JA2.0*;AKGF3AEXJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AECS*ABOLT HOLE QUANTITY
THE NUMBER OF BOLT HOLES PROVIDED ON THE ITEM.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(AECS3AEXA10)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CWCQ*JBOLT HOLE NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE BOLT HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCQ3AEXJA2.0*;CWCQ3AEXJA2.0$JA2.0*;CWCQ3AEXJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCT*JBOLT CIRCLE NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE BOLT CIRCLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCT3AIBJA2.0*;CWCT3AIBJA2.0$JA2.0*;CWCT3AIBJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCY*JCENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH
THE CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG THE LENGTH OF AN ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCY3AEEJA2.0*;CWCY3AEEJA2.0$JA2.0*;CWCY3AEEJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWDC*JCENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH
THE CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG THE WIDTH OF AN ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWDC3AEUJA2.0*;CWDC3AEUJA2.0$JA2.0*;CWDC3AEUJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEU | SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AAGW*JWIDTH ACROSS FLATS
THE SHORTEST STRAIGHT LINE BETWEEN THE FLATS OF A HEXAGONAL OR OCTAGONAL CROSS-SECTIONAL PLANE WHICH IS PERPENDICULAR TO THE HEIGHT.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAGW3AEEJA2.0*;AAGW3AEEJA2.0$JA2.0*;AAGW3AEEJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
ADBQ*JOUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE ITEM,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADBQ3AEXJA2.0*;ADBQ3AEXJA2.0$JA2.0*;ADBQ3AEXJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWDF*DFLANGE FACE DESIGN
THE DESIGN OF THE FLANGE FACE.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CWDF3AEXDBA*;CWDF3AEXDBA$DBG*;CWDF3AEXDBA$$DBG*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH33) | Reply |
| AH | PLAIN |
| AW | PLAIN SWIVEL |
| AZ | RAISED STRAIGHT |
| BA | RAISED SWIVEL |
| BC | RAISED WITH CURVE AND COUNTERBORE |
| BD | RAISED WITH CURVE AND RADIUS |
| BF | RECESSED STRAIGHT |
| BG | RECESSED WITH GASKET GROOVE |
Reference NotesRefer to Reference Drawings for determining flange face design. Optional face designs cannot be entered for this requirement.
Refer to Reference Drawings for assitance in answering this MRC.
CWDW*JNOMINAL INSIDE DIAMETER HOSE ACCOMMODATED
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE ACCOMMODATED HOSE,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWDW3AEXJA2.0*;CWDW3AEXJA2.0$JA2.0*;CWDW3AEXJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AAAR*JNOMINAL PIPE SIZE ACCOMMODATED
A MEASUREMENT OF THE PIPE SIZE THE ITEM WILL ACCOMMODATE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAAR3AEXJA2.0*;AAAR3AEXJA2.0$JA2.0*;AAAR3AEXJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWFD*JNOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE ACCOMMODATED TUBE,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWFD3AEXJA2.0*;CWFD3AEXJA2.0$JA2.0*;CWFD3AEXJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
IF STYLE/REPLY CODE(s) AN, BF, BR, BS, BW, FB, MT, NG, NP, NT, PF, PL, PM, PP, PS, PT, SF, SH OR ZP WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJF)
IF STYLE/REPLY CODE(s) AM, JC, JE, JF, NC, NE, NF OR SA WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJD and AAJF)
IF STYLE/REPLY CODE(s) EM, MJ, SM OR SS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJF) or (CQJX and CQQR and AAJF)
IF STYLE/REPLY CODE(s) NH WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP and AAJF)
IF STYLE/REPLY CODE(s) RD WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CQQR)
IF STYLE/REPLY CODE(s) SJ OR SK WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CQQR and AAJF) or (CQJX and AAJF)
IF STYLE/REPLY CODE(s) NJ OR UN WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP and AAJD and AAJF)
IF STYLE/REPLY CODE(s) JS OR NS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP and AAJD and AAJF) or (CQJX and CMLP and AAJF)
IF STYLE/REPLY CODE(s) NM WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP and AAJF) or (CQJX and CQQR and AAJF)
THSD*DTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(THSD3AETDBF*;THSD3AETDBF$DSF*;THSD3AETDBF$$DSF*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH06) | Reply |
| AM | ACME |
| AN | ANPT |
| BF | BRITISH STANDARD FINE (BSF) |
| BW | BRITISH STANDARD WHITWORTH (BSW) |
| ZP | BSP. L |
| FB | BSP.F |
| PL | BSP.PL |
| BS | BSP.TR EXT |
| BR | BSP.TR INT |
| SM | ISO M |
| SS | ISO S |
| EM | M |
| MJ | MJ |
| NG | NGO |
| NH | NH |
| SF | NPSF |
| SH | NPSH |
| PS | NPSI |
| PM | NPSM |
| NP | NPT |
| NT | NPTF |
| PT | PTF-SAE SHORT |
| PP | PTF-SPL |
| PF | PTF-SPL SHORT |
| RD | ROUND |
| SJ | SI |
| SK | SI-M |
| SA | STUB ACME |
| MT | SUBMARINE THD |
| UN | UN |
| NC | UNC |
| NE | UNEF |
| NF | UNF |
| NJ | UNIFIED NATIONAL FINE (UNJ) |
| JF | UNIFIED NATIONAL JOINT FINE (UNJF) |
| JC | UNJC |
| JE | UNJEF |
| JS | UNJS |
| NM | UNM |
| NS | UNS |
CQJX*JNOMINAL THREAD SIZE
A DESIGNATION THAT IS USED FOR THE PURPOSE OF GENERAL IDENTIFICATION OF THE THREAD.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQJX3AIBJA2.0*;CQJX3AIBJA2.0$JA2.0*;CQJX3AIBJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CMLP*ATHREAD QUANTITY PER INCH
THE NUMBER OF THREADS ON THE ITEM PER LINEAR INCH MEASURED ON A LINE PARALLEL TO THE THREAD AXIS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(CMLP3AEUAM1)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AAJD*ATHREAD CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(AAJD3AEEAA1)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CQQR*BTHREAD PITCH IN MILLIMETERS
A MEASUREMENT OF DISTANCE BETWEEN CORRESPONDING POINTS ON TWO ADJACENT THREADS MEASURED PARALLEL TO THE THREAD AXIS,EXPRESSED IN MILLIMETERS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(CQQR3AIBB2.0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AAJF*DTHREAD DIRECTION
THE DIRECTION OF THE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AAJF3AETDAAG*;AAJF3AETDAAG$DAAL*;AAJF3AETDAAG$$DAAL*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA38) | Reply |
| AAG | LEFT-HAND |
| AAL | RIGHT-HAND |
AZGM*DMOUNTING FACILITY
THE FACILITY FOR MOUNTING THE ITEM.
Enter the applicable reply code from the table below
(AZGMDBWX)
| Table 1 |
| Reply Code (AM39) | Reply |
| ABC | BRACKET |
| BJY | BULKHEAD |
| ABH | CLAMP |
| ABN | LUG |
| AED | PANEL |
| AKB | THREADED FASTENER |
| BWX | WAFER |
TMQY*JFURNISHED ITEMS AND QUANTITY
THE NAME AND NUMBER OF THOSE PARTS FURNISHED WITH THE ITEM OF SUPPLY THAT HAVE NOT BEEN SPECIFIED ELSEWHERE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(TMQYJACH2*;TMQYJACH2$$JACH3*)
| Table 1 |
| Reply Code (AB28) | Reply |
| ACH | ADAPTER |
| AKH | FERRULE |
| ABW | NUT |
| BFT | OPEN DRAIN |
| ACR | PLUGGED DRAIN |
| ADA | WRENCH |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDAAZ)
| Table 1 |
| Reply Code (AN47) | Reply |
| AAW | ADJUSTABLE ROTATION STOP |
| AAZ | NONADJUSTABLE ROTATION |
| FNY | ROHS DIRECTIVE COMPLIANCE |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ030*;HZRDDHAZ029$$DHAZ042*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ042 | ASBESTOS |
| HAZ008 | CADMIUM |
| HAZ011 | CHROMIUM |
| HAZ012 | COPPER |
| HAZ029 | LEAD |
| HAZ030 | MAGNESIUM ALLOY |
| HAZ052 | ZINC |
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)