A nonbulbous instrument calibrated with graduations along the cylindrical portion only.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED16759*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDGSA000*;MATTDPCAC00$DGSE000*;MATTDPCAC00$$DGSE000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| GSA000 | GLASS |
| GSE000 | GLASS BOROSILICATE |
| PCA000 | PLASTIC |
| PCX000 | PLASTIC POLYETHYLENE |
| PCAC00 | PLASTIC POLYPROPYLENE |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
ANEH*DDESIGN DESIGNATION
THE DESIGNATION DERIVED FROM THE NAME OF THE DESIGNER OR USE FOR WHICH THE ITEM IS INTENDED.
Enter the applicable reply code from the table below
(ANEHDBQK)
| Table 1 |
| Reply Code (AJ50) | Reply |
| BQD | ASSOCIATED RESEARCH |
| BAB | BERZELTUS |
| AAJ | BREWER |
| BQE | BUECHNER |
| BQF | CALDWELL |
| GVH | CARAWAY |
| BQG | CLINITEST REAGENT TEST |
| BEL | COPLIN |
| BAL | DEWAR |
| BAM | DIXON |
| BQH | FERNBACH |
| BQJ | FOLIN |
| BQK | FOLIN-WU |
| BAR | FRENCH |
| BAS | FRESENIUS |
| BAK | FRIEDMAN-LAMER |
| BQL | GOOCH |
| BAN | GRIFFIN |
| BQM | HIRSCH |
| BQN | IVES |
| CFS | JACKSON |
| BQP | KAHN |
| CGY | KIRK |
| BQQ | KOLLE |
| BQR | KOLMER |
| BBN | KRAISSEL |
| BQS | LANG-LEVY |
| BAP | LUFT |
| BPF | MOHR |
| GVJ | NATELSON |
| BQB | OSTWALD |
| BQT | OSTWALD-FOLIN |
| BQW | PASTEUR |
| ADX | PETROFF |
| BQX | PICKARD-PIERCE |
| BBL | PINCHCOCK/SALVARSAN |
| BQY | ROUX |
| BPP | SAHLI |
| BBM | SALVARSAN |
| BQZ | SAYBOLT DRAW-OFF |
| BBP | SCHELLBACH |
| BCS | SCHWARTZ |
| BCT | SNYDER |
| BRA | STENDER |
| BRB | TAPER TOP-SWIM |
| BRC | THOMA |
| BCW | THUNBERG |
| BRD | TRENNER |
| BRE | USP |
| BRG | V.D.L. |
| BRH | V.D.R.L. |
| CTY | VAN SLYKE |
| BRF | VAN SLYKE-NEILL |
| BCX | WESTERGREN |
| BRJ | WESTGREN |
IF STYLE/REPLY CODE(s) M1, M2, M3, M4, M5, M6, M7, M8, M9, M10, M11, M12, M13, M23, M24 OR M35 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP)
IF STYLE/REPLY CODE(s) M14, M15 OR M25 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AEVU and ABHP and CSZS) or (ABHP and CSZS)
IF STYLE/REPLY CODE(s) M16, M17, M18, M20, M21 OR M22 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CSMQ)
IF STYLE/REPLY CODE(s) M28, M29, M30 OR M31 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP)
IF STYLE/REPLY CODE(s) M19 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and CSMQ)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLM19)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| BV10214 | M1 | AUTOMATIC |
| BV10223 | M10 | MICRO CONSTRICTED |
| BV10224 | M11 | WHITE CORPUSCLES |
| BV10225 | M12 | RED CORPUSCLES |
| BV10226 | M13 | SPECIFIC GRAVITY WEIGHING |
| BV10227 | M14 | DROPPING CURVED END PLAIN TIP |
| BV10228 | M15 | DROPPING STRAIGHT END PLAIN TIP |
| BV10229 | M16 | PLAIN MOUTH |
| BV10230 | M17 | REDUCED MOUTH |
| BV10231 | M18 | GENERAL PURPOSE SEROLOGICAL |
| BV10232 | M19 | CONSTRICTED |
| BV10215 | M2 | PASTEUR |
| BV10233 | M20 | STRAIGHT |
| BV10234 | M21 | STRAIGHT |
| BV10235 | M22 | EXPANDED MOUTH SEROLOGICAL |
| BV10236 | M23 | VOLUMETRIC |
| BV10237 | M24 | VOLUMETRIC TRANSFER TYPE |
| BV10238 | M25 | DROPPING W/INCORPORATED BOTTLE CLOSURE |
| BV10239 | M26 | CAPILLARY TIP |
| BV10240 | M27 | DISPOSABLE TIP |
| BV10241 | M28 | SMALL TIP |
| BV10242 | M29 | MEDIUM TIP |
| BV10216 | M3 | CAPILLARY, BREED AND BREW |
| BV10243 | M30 | LARGE TIP |
| BV10244 | M31 | TRANSFER ONE PIECE W/MOLDED BULB |
| BV10245 | M32 | PLUNGER TIP |
| BV10246 | M33 | SYRINGE, AUTOMATIC TRANSFER |
| BV10247 | M34 | RESERVOIR TIP |
| BV10248 | M35 | MICRO CAPILLARY OPEN ENDS |
| BV10217 | M4 | MILK DILUTING PLAIN MOUTH |
| BV10218 | M5 | MILK DILUTING REDUCED MOUTH |
| BV10219 | M6 | CAPILLARY STRAIGHT WESTERGREN |
| BV10220 | M7 | FOLIN V.D.R.L. |
| BV10221 | M8 | BULB TYPE |
| BV10222 | M9 | BULB AND COCK |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAC2.0*;ABHPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEVU*JBULB LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF A BULB.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEVUJAC2.0*;AEVUJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CSMQ*JSCALE PORTION OUTSIDE DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CSMQJAC2.0*;CSMQJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CSZS*JOUTSIDE DIAMETER EXCLUDING COLLAR
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CSZSJAC2.0*;CSZSJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BBLTJCAPACITY RATING
A MEASUREMENT OF THE CAPACITY OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BBLTJDHC2.0*;BBLTJDHC2.0$$JDHC2.1*)
| Table 1 |
| Reply Code (AG67) | Reply |
| AC | CUBIC CENTIMETERS |
| CD | DRAMS |
| AF | GALLONS |
| AG | GRAINS |
| CC | LITERS |
| HN | MICROLITERS |
| AM | MILLILITERS |
| HP | MINIMS |
| DH | OUNCES, FLUID |
| CG | PERCENT |
| AR | PINTS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BJBS*DCALIBRATION FUNCTION
A DESIGNATION OF THE FUNCTION WHICH IS CALIBRATED.
Enter the applicable reply code from the table below
(BJBSDDX*;BJBSDEL$DDW*;BJBSDEL$$DDW*)
| Table 1 |
| Reply Code (AJ52) | Reply |
| DW | TO CONTAIN |
| DX | TO DELIVER |
| EL | TO DELIVER W/VOLUME ADJUSTED FOR BLOWING OUT LAST DROP |
CSTJ*DSCALE READING DIRECTION
INDICATES THE READING DIRECTION OF THE SCALE.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CSTJ3AEEDC*;CSTJ3AEEDC$DK*;CSTJ3AEEDC$$DK*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AYP | OUTSIDE SINGLE SCALE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB50) | Reply |
| K | BOTTOM TO TOP |
| C | TOP TO BOTTOM |
CQPX*JSCALE GRADUATION UNIT
INDICATES THE INCREMENTS OF MEASURE ON THE SCALE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQPX3AEEJAF2.0*;CQPX3AEEJAF2.0$JAF2.0*;CQPX3AEEJAF2.0$$JAF2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AYS | SINGLE INTERVAL SINGLE SCALE |
| 3AYV | FIRST INTERVAL SINGLE SCALE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AG67) | Reply |
| AC | CUBIC CENTIMETERS |
| CD | DRAMS |
| AF | GALLONS |
| AG | GRAINS |
| CC | LITERS |
| HN | MICROLITERS |
| AM | MILLILITERS |
| HP | MINIMS |
| DH | OUNCES, FLUID |
| CG | PERCENT |
| AR | PINTS |
CTBL*JSCALE GRADUATION UNIT RANGE
INDICATES THE RANGE OF THE INCREMENTS OF MEASURE ON THE SCALE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(CTBL3AYVJAMM32.0/P50.0*;CTBL3AYVJAMM32.0/P50.0$$JAM*;CTBL3AYVJAMM32.0/P50.0$JAMM32.0/P50.0*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AYS | SINGLE INTERVAL SINGLE SCALE |
| 3AYV | FIRST INTERVAL SINGLE SCALE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AG67) | Reply |
| AC | CUBIC CENTIMETERS |
| CD | DRAMS |
| AF | GALLONS |
| AG | GRAINS |
| CC | LITERS |
| HN | MICROLITERS |
| AM | MILLILITERS |
| HP | MINIMS |
| DH | OUNCES, FLUID |
| CG | PERCENT |
| AR | PINTS |
ASTW*GSCALE MARKING
AN INDICATION OF THE MARKING(S) ON THE SCALE.
Enter clear text.
(ASTWGCLEARTEXT)
CRLY*DGRADUATION MARKING METHOD
THE PROCESS USED IN MARKING THE GRADUATIONS ON THE ITEM.
Enter the applicable reply code from the table below
(CRLYDDW*;CRLYDDC$DDD*)
| Table 1 |
| Reply Code (AM12) | Reply |
| DC | ENGRAVED |
| DD | ETCHED |
| DW | FIRED ENAMEL |
| DX | FIRED STAIN |
| DT | GRIT BLASTED |
| DF | MOLDED |
| DG | PAINTED |
BMJP*DCOLOR CODING
THE HUE OR TINT OF THE COLOR CODING.
Enter the applicable reply code from the table below
(BMJPDPU0033*;BMJPDRG0000$DRE0000*;BMJPDRG0000$$DRE0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BR0000 | BROWN |
| CL0000 | CLEAR |
| CL0001 | COLORLESS |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| PU0033 | LAVENDER |
| NA0000 | NATURAL |
| RG0000 | ORANGE |
| PK0000 | PINK |
| RE0000 | RED |
| WH0000 | WHITE |
| WH0019 | WHITE, OPAQUE |
| YE0000 | YELLOW |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDAQD*;CBBLDDJW$DCPY*;CBBLDDJW$$DCPY*)
| Table 1 |
| Reply Code (AN47) | Reply |
| DJV | ATTACHED NEEDLE |
| BHQ | AUTOCLAVABLE |
| CTJ | AUTOMATIC |
| BEL | BULB |
| CZQ | CANTED NECK |
| AQB | CAPILLARY ACTION |
| AQC | CAPILLARY AT GRADUATION MARK |
| AQD | CAPILLARY TIP |
| CRW | CLEAR |
| CSR | CLOUD AND POUR |
| CSS | CONTROLLED DROP SIZE |
| CST | COTTON PLUG |
| BEM | COVER |
| CTK | DIAL CONTROL |
| CTL | DIGITAL READOUT |
| AQE | DISPOSABLE |
| CPW | DISPOSABLE TIP |
| AQF | ELONGATED TIP |
| DJY | END TO END FILL |
| CSU | EXTRA FINE TIP |
| AQG | FILLED MARKINGS |
| CSV | FINE TIP |
| AQH | FIXED PLATE |
| CSW | FLEXIBLE BULB |
| CSX | GAS STERILIZABLE |
| AQJ | GRADUATED TO TIP |
| CPD | GROOVE |
| AQK | HANDLE |
| AQL | HEAVY WALL CONSTRUCTION |
| CRL | HEPARINIZED |
| AQM | HOOK |
| BCG | INDIVIDUALLY SEALED |
| CZR | LEAKPROOF |
| AQN | MERCURY SEAL |
| CSY | MICRO TIP |
| CSZ | NARROW TAPER WITH FINE TIP |
| CTM | NONPLUGGED |
| CRY | NONSERIALIZED |
| EHE | NONSILICONE COATED |
| AQP | NONSTERILE |
| CTN | NONWETTABLE |
| CZS | PHENOLIC CAP |
| CPX | PLUNGER |
| CPY | PLUNGER WIRE |
| AQQ | POUR-OUT |
| DRX | PREASSEMBLED |
| CRM | PRELABELED |
| ALS | PROTECTIVE CAP |
| CTA | REGULAR TIP |
| AQR | REMOVABLE PLATE |
| AQS | REUSABLE |
| AQT | SIDE FUNNEL |
| CRN | SILICONE COATED |
| AFM | STERILE |
| CTP | SYRINGE TYPE |
| DJZ | TAPERED TIP |
| CTB | THIN STEM |
| CRX | THIN WALL CONSTRUCTION |
| CTQ | TIP EJECTOR |
| CZT | TISSUE CULTURED TREATED |
| DJW | VACUUM |
BTHN*DACCURACY CERTIFIER
THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZAITON ATTESTING TO THE TOLERANCE ACCURACY OF THE ITEM.
Enter the applicable reply code from the table below
(BTHNDAE)
| Table 1 |
| Reply Code (AM46) | Reply |
| AE | MANUFACTURER |
| AF | NATIONAL BUREAU OF STANDARDS |
CQCTDPRIMARY CONTAINER TYPE
INDICATES THE TYPE OF CONTAINER/S/ OR SUPPORTING DEVICE/S/ WHICH IS IN DIRECT CONTACT WITH THE ITEM.
Enter the applicable reply code from the table below
(CQCTDAFQ*;CQCTDACD$DADM*)
| Table 1 |
| Reply Code (AN65) | Reply |
| AAH | BAG |
| AAK | BOTTLE |
| ACD | BOX |
| ACJ | CAN |
| ACX | CARTON |
| ADD | CASE |
| ADF | DISPENSER |
| ADM | ENVELOPE |
| AFL | PACKAGE |
| AGH | RACK |
| AEC | SPOOL |
| AFZ | TRAY |
| AFQ | VIAL |
CQTFAPRIMARY CONTAINER UNIT QUANTITY
THE NUMBER OF ITEMS OF SUPPLY WITHIN EACH PRIMARY CONTAINER.
Enter the numeric reply with a minimum of one digit.
(CQTFA10*)
CSCW*ATOTAL PRIMARY CONTAINER QUANTITY
THE NUMBER OF PRIMARY CONTAINERS WITHIN THE ITEM OF SUPPLY.
Enter the numeric reply with a minimum of one digit.
(CSCWA10*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
AFJQ*JSTORAGE TEMP RANGE
THE MINIMUM AND MAXIMUM TEMPERATURES AT WHICH AN ITEM CAN BE STORED WITHOUT DETRIMENTAL EFFECT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFJQJCM32.0/P50.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
BBRH*JINSPECTION FREQUENCY
THE SPECIFIED TIME INTERVAL,FROM RECEIPT,NECESSARY TO DETECT MATERIAL DETERIORATION THAT WILL AFFECT STOCK READINESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit.
(BBRHJMHAB2*;BBRHJMHAB2$$JMHAB3*)
| Table 1 |
| Reply Code (AH68) | Reply |
| MH | MONTHS |
| YR | YEARS |
| Table 2 |
| Reply Code (AM82) | Reply |
| AB | FIRST INSPECTION |
| AC | REINSPECTION |
BBRG*DSTORAGE TYPE
INDICATES THE TYPE OF STORAGE SPACE REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(BBRGDAD*;BBRGDAE$DAM*;BBRGDAE$$DAM*)
| Table 1 |
| Reply Code (AM81) | Reply |
| AD | CONTROLLED HUMIDITY WAREHOUSE |
| AM | DEHUMIDIFIED WAREHOUSE |
| AE | GENERAL PURPOSE WAREHOUSE |
| AN | HEATED WAREHOUSE |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCC2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
| CF | CUBIC FEET |
| CN | CUBIC INCHES |
| CM | CUBIC METERS |
BBRJ*DSPECIAL HANDLING FEATURE
THE UNUSUAL OR UNIQUE CHARACTERISTIC/S/ OR QUALITY/IES/ OF AN ITEM WHICH NECESSITATES THE ESTABLISHMENT OF A REQUIREMENT FOR SPECIAL HANDLING.
Enter the applicable reply code from the table below
(BBRJDAE*;BBRJDAQ$$DAQ*)
| Table 1 |
| Reply Code (AM83) | Reply |
| AE | FRAGILE |
| AQ | PILFERABLE |
AFJN*DFRAGILITY FACTOR
THE MEASURE OF SENSITIVITY OF THE ITEM TO BE PACKAGED. A FACTOR USED BY PACKAGING ENGINEERS IN DEVISING PROPER CUSHIONING IN A PACKAGE.
Enter the applicable reply code from the table below
(AFJNDC)
| Table 1 |
| Reply Code (AD40) | Reply |
| D | DELICATE |
| B | EXTREMELY FRAGILE |
| E | MODERATELY DELICATE |
| F | MODERATELY RUGGED |
| G | RUGGED |
| C | VERY DELICATE |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
AJAF*JUNPACKAGED UNIT LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING, IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAFJAA2.0*;AJAFJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJAG*JUNPACKAGED UNIT WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAGJAA2.0*;AJAGJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJAH*JUNPACKAGED UNIT HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAHJAC2.0*;AJAHJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJCN*DPROTECTIVE STORAGE FEATURE
THE PECULIAR STORAGE FEATURE/S/ REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(AJCNDCW*;AJCNDCX$$DCZ*)
| Table 1 |
| Reply Code (AA65) | Reply |
| CW | HUMIDITY CONTROLLED |
| CX | NONFLAMMABLE |
| CZ | SECURITY |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDAUA000*;PRMTDRTA000$$DRHA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJAZA000R2.0*;PMWTJAZA000R2.0$$JAZA000R2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJIRA0002.0*;PMLCJIRA0002.0$$JIRA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDGR0000*;HUESDRE0000$DCL0001*)
| Table 1 |
| Reply Code (AD06) | Reply |
| AM0000 | AMBER |
| BU0000 | BLUE |
| BR0000 | BROWN |
| CL0001 | COLORLESS |
| GR0000 | GREEN |
| RE0000 | RED |
| WH0000 | WHITE |
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ012)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ012 | COPPER |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information