A cylindrically-shaped metal item, usually tubular, designed to form a pivoting connection between the piston and connecting rod of an internal combustion engine, compressor and like items. May include oil sealing or pin retaining plugs. Excludes:BUSHING, SLEEVE; PIN, GROOVED, HEADLESS; PIN, STRAIGHT, HEADLESS; and PIN, HOLLOW.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED16414*)
AETCJMETALLIC HARDNESS RATING
A NUMERIC VALUE THAT REFLECTS THE HARDNESS OF A METALLIC ITEM WHEN USED IN CONJUNCTION WITH A HARDNESS RATING SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AETCJBRA2.0*;AETCJBRA2.0$$JBRA2.1*)
| Table 1 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 2 |
| Reply Code (AC26) | Reply |
| BH | BRINELL HULTGREN |
| BS | BRINELL STANDARD |
| BT | BRINELL TUNGSTEN CARBIDE |
| RA | ROCKWELL A |
| RB | ROCKWELL B |
| RC | ROCKWELL C |
| RD | ROCKWELL D |
| RF | ROCKWELL F |
| RG | ROCKWELL G |
| RS | ROCKWELL SUPERFICIAL 15-N |
| RU | ROCKWELL SUPERFICIAL 30-N |
| RN | ROCKWELL SUPERFICIAL 45-N |
| VF | VICKERS OR FIRTH DIAMOND PYRAMID |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3BDPDST1049*;MATT3BDPDST1049$DST8620*;MATT3BDPDST1049$$DST8620*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BDP | PLUG |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| CAA000 | CALCIUM SILICATE |
| CUB000 | COPPER ALLOY |
| NLB000 | NICKEL ALLOY |
| STA000 | STEEL |
| ZSC000 | STEEL ALLOY |
| ST0370 | STEEL COMP 1.0401 |
| ST0842 | STEEL COMP 1.1141 |
| ST0869 | STEEL COMP 1.7131 |
| ST1008 | STEEL COMP 1008 |
| ST1010 | STEEL COMP 1010 |
| ST1012 | STEEL COMP 1012 |
| ST1015 | STEEL COMP 1015 |
| ST1016 | STEEL COMP 1016 |
| ST1017 | STEEL COMP 1017 |
| ST1018 | STEEL COMP 1018 |
| ST1019 | STEEL COMP 1019 |
| ST1020 | STEEL COMP 1020 |
| ST1022 | STEEL COMP 1022 |
| ST1023 | STEEL COMP 1023 |
| ST0493 | STEEL COMP 1023W |
| ST1025 | STEEL COMP 1025 |
| ST1026 | STEEL COMP 1026 |
| ST1029 | STEEL COMP 1029 |
| ST1030 | STEEL COMP 1030 |
| ST1035 | STEEL COMP 1035 |
| ST1037 | STEEL COMP 1037 |
| ST1038 | STEEL COMP 1038 |
| ST1040 | STEEL COMP 1040 |
| ST1042 | STEEL COMP 1042 |
| ST1043 | STEEL COMP 1043 |
| ST1045 | STEEL COMP 1045 |
| ST1046 | STEEL COMP 1046 |
| ST1049 | STEEL COMP 1049 |
| ST1050 | STEEL COMP 1050 |
| ST1060 | STEEL COMP 1060 |
| ST1080 | STEEL COMP 1080 |
| ST1090 | STEEL COMP 1090 |
| ST1095 | STEEL COMP 1095 |
| ST1117 | STEEL COMP 1117 |
| ST1118 | STEEL COMP 1118 |
| ST1212 | STEEL COMP 1212 |
| ST1213 | STEEL COMP 1213 |
| ST1524 | STEEL COMP 1524 |
| ST1536 | STEEL COMP 1536 |
| ST1541 | STEEL COMP 1541 |
| ST1548 | STEEL COMP 1548 |
| ST0302 | STEEL COMP 302 |
| ST0304 | STEEL COMP 304 |
| ST3115 | STEEL COMP 3115 |
| ST3120 | STEEL COMP 3120 |
| ST4140 | STEEL COMP 4140 |
| ST4615 | STEEL COMP 4615 |
| ST4620 | STEEL COMP 4620 |
| ST4640 | STEEL COMP 4640 |
| ST4815 | STEEL COMP 4815 |
| ST5015 | STEEL COMP 5015 |
| ST5115 | STEEL COMP 5115 |
| ST5117 | STEEL COMP 5117 |
| ST5120 | STEEL COMP 5120 |
| ST0630 | STEEL COMP 630 |
| ST8615 | STEEL COMP 8615 |
| ST8617 | STEEL COMP 8617 |
| ST8620 | STEEL COMP 8620 |
| ST0137 | STEEL COMP 8620H |
| ST8740 | STEEL COMP 8740 |
| ST0015 | STEEL COMP B1112 |
| ST0026 | STEEL COMP E3310 |
| ST0029 | STEEL COMP E4340H |
| ST0030 | STEEL COMP E52100 |
| ST0031 | STEEL COMP E9310 |
| ST0479 | STEEL COMP E9314 |
| ST9316 | STEEL COMP E9315 |
| STB000 | STEEL CORROSION RESISTING |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BDP | PLUG |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
AASGDCASEHARDENING INDICATOR
INDICATES WHETHER OR NOT A FERROUS ALLOY OBJECT HAS BEEN SUBJECTED TO A PROCESS WHEREBY THE OUTER PORTION IS MADE SUBSTANTIALLY HARDER THAN THE INNER PORTION OR CORE.
Enter the applicable reply code from the table below
(AASGDB)
| Table 1 |
| Reply Code (AA70) | Reply |
| A | CASEHARDENED |
| B | NOT CASEHARDENED |
IF STYLE/REPLY CODE(s) 21A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABGC and ANTS and ABGA and ABKV and AAZT and ANTW and ABQM and ANTP)
IF STYLE/REPLY CODE(s) 21B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABGC and ANTS and ABGA and ABKV and AAZT and ANTW and ABQM and ABRB)
IF STYLE/REPLY CODE(s) 21C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABGC and ANTS and ABGA and ABKV and AAZT and ANTW and ABQM and ANTP and ABRB)
IF STYLE/REPLY CODE(s) 20A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ABGC and AAZT and ABQM and ANTP)
IF STYLE/REPLY CODE(s) 20B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ABGC and AAZT and ABQM and ABRB)
IF STYLE/REPLY CODE(s) 20C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ABGC and AAZT and ABQM and ANTP and ABRB)
IF STYLE/REPLY CODE(s) 19A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and AAZT and ABGC and ANTT and ANTS and ABGA and ABKV and ANTZ and ANTP)
IF STYLE/REPLY CODE(s) 19B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and AAZT and ABGC and ANTT and ANTS and ABGA and ABKV and ANTZ and ABRB)
IF STYLE/REPLY CODE(s) 19C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and AAZT and ABGC and ANTT and ANTS and ABGA and ABKV and ANTZ and ANTP and ABRB)
IF STYLE/REPLY CODE(s) 18A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABGC and ANTS and ABGA and ABKV and AAZT and ANTW and ANTP)
IF STYLE/REPLY CODE(s) 18B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABGC and ANTS and ABGA and ABKV and AAZT and ANTW and ABRB)
IF STYLE/REPLY CODE(s) 18C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABGC and ANTS and ABGA and ABKV and AAZT and ANTW and ANTP and ABRB)
IF STYLE/REPLY CODE(s) 17A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABGC and AAZT and ABKV and ANTP)
IF STYLE/REPLY CODE(s) 17B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABGC and AAZT and ABKV and ABRB)
IF STYLE/REPLY CODE(s) 17C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABGC and AAZT and ABKV and ANTP and ABRB)
IF STYLE/REPLY CODE(s) 16A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTW and ANTS and ABGA and ABGG and ANTP)
IF STYLE/REPLY CODE(s) 16B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTW and ANTS and ABGA and ABGG and ABRB)
IF STYLE/REPLY CODE(s) 16C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTW and ANTS and ABGA and ABGG and ANTP and ABRB)
IF STYLE/REPLY CODE(s) 15A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ABGG and ANTP)
IF STYLE/REPLY CODE(s) 15B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ABGG and ABRB)
IF STYLE/REPLY CODE(s) 15C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ABGG and ANTP and ABRB)
IF STYLE/REPLY CODE(s) 14A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTT and ANTS and ABGA and ABGG and ANTP)
IF STYLE/REPLY CODE(s) 14B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTT and ANTS and ABGA and ABGG and ABRB)
IF STYLE/REPLY CODE(s) 14C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTT and ANTS and ABGA and ABGG and ANTP and ABRB)
IF STYLE/REPLY CODE(s) 13A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTT and ANTS and ABGA and ANTZ and ABGG and ANTP)
IF STYLE/REPLY CODE(s) 13B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTT and ANTS and ABGA and ANTZ and ABGG and ABRB)
IF STYLE/REPLY CODE(s) 13C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTT and ANTS and ABGA and ANTZ and ABGG and ANTP and ABRB)
IF STYLE/REPLY CODE(s) 12A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTS and ANTT and ABGA and ANTP)
IF STYLE/REPLY CODE(s) 12B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTS and ANTT and ABGA and ABRB)
IF STYLE/REPLY CODE(s) 12C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTS and ANTT and ABGA and ANTP and ABRB)
IF STYLE/REPLY CODE(s) 11A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ANTS and ABGA and ABKV and ANTT and ANTZ and ANTP)
IF STYLE/REPLY CODE(s) 11B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ANTS and ABGA and ABKV and ANTT and ANTZ and ABRB)
IF STYLE/REPLY CODE(s) 11C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ANTS and ABGA and ABKV and ANTT and ANTZ and ANTP and ABRB)
IF STYLE/REPLY CODE(s) 10A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTT and ANTS and ABGA and ANTZ and ABQM and ANTP)
IF STYLE/REPLY CODE(s) 10B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTT and ANTS and ABGA and ANTZ and ABQM and ABRB)
IF STYLE/REPLY CODE(s) 10C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTT and ANTS and ABGA and ANTZ and ABQM and ANTP and ABRB)
IF STYLE/REPLY CODE(s) 21 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABGC and ANTS and ABGA and ABKV and AAZT and ANTW and ABQM)
IF STYLE/REPLY CODE(s) 20 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ABGC and AAZT and ABQM)
IF STYLE/REPLY CODE(s) 19 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and AAZT and ABGC and ANTT and ANTS and ABGA and ABKV and ANTZ)
IF STYLE/REPLY CODE(s) 18 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABGC and ANTS and ABGA and ABKV and AAZT and ANTW)
IF STYLE/REPLY CODE(s) 17 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABGC and AAZT and ABKV)
IF STYLE/REPLY CODE(s) 16 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTW and ANTS and ABGA and ABGG)
IF STYLE/REPLY CODE(s) 15 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ABGG)
IF STYLE/REPLY CODE(s) 14 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTT and ANTS and ABGA and ABGG)
IF STYLE/REPLY CODE(s) 13 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTT and ANTS and ABGA and ANTZ and ABGG)
IF STYLE/REPLY CODE(s) 12 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTS and ANTT and ABGA)
IF STYLE/REPLY CODE(s) 11 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ANTS and ABGA and ABKV and ANTT and ANTZ)
IF STYLE/REPLY CODE(s) 10 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTT and ANTS and ABGA and ANTZ and ABQM)
IF STYLE/REPLY CODE(s) 9A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTT and ANTS and ABGA and ABQM and ANTP)
IF STYLE/REPLY CODE(s) 9B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTT and ANTS and ABGA and ABQM and ABRB)
IF STYLE/REPLY CODE(s) 9C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTT and ANTS and ABGA and ABQM and ANTP and ABRB)
IF STYLE/REPLY CODE(s) 8A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ABRV and AFYS and ANTX and ABRR and ANTP)
IF STYLE/REPLY CODE(s) 8B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ABRV and AFYS and ANTX and ABRR and ABRB)
IF STYLE/REPLY CODE(s) 8C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ABRV and AFYS and ANTX and ABRR and ANTP and ABRB)
IF STYLE/REPLY CODE(s) 7A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ANTS and ABKV and ANTW and ABGA and ABQM and ANTP)
IF STYLE/REPLY CODE(s) 7B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ANTS and ABKV and ANTW and ABGA and ABQM and ABRB)
IF STYLE/REPLY CODE(s) 7C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ANTS and ABKV and ANTW and ABGA and ABQM and ANTP and ABRB)
IF STYLE/REPLY CODE(s) 6A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ABRV and AFYS and ANTX and ABQM and ABRR and ANTP)
IF STYLE/REPLY CODE(s) 6B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ABRV and AFYS and ANTX and ABQM and ABRR and ABRB)
IF STYLE/REPLY CODE(s) 6C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ABRV and AFYS and ANTX and ABQM and ABRR and ANTP and ABRB)
IF STYLE/REPLY CODE(s) 5A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ABQM and ANTP)
IF STYLE/REPLY CODE(s) 5B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ABQM and ABRB)
IF STYLE/REPLY CODE(s) 5C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ABQM and ANTP and ABRB)
IF STYLE/REPLY CODE(s) 4A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ANTS and ABGA and ABKV and ANTW and ANTP)
IF STYLE/REPLY CODE(s) 4B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ANTS and ABGA and ABKV and ANTW and ABRB)
IF STYLE/REPLY CODE(s) 4C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ANTS and ABGA and ABKV and ANTW and ANTP and ABRB)
IF STYLE/REPLY CODE(s) 3A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ANTY and ABGC and AAZT and ABKV and ABGA and ANTS and ADAQ and ANTP)
IF STYLE/REPLY CODE(s) 3B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ANTY and ABGC and AAZT and ABKV and ABGA and ANTS and ADAQ and ABRB)
IF STYLE/REPLY CODE(s) 3C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ANTY and ABGC and AAZT and ABKV and ABGA and ANTS and ADAQ and ANTP and ABRB)
IF STYLE/REPLY CODE(s) 2A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and AAZT and ANTY and ABGC and ANTP)
IF STYLE/REPLY CODE(s) 2B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and AAZT and ANTY and ABGC and ABRB)
IF STYLE/REPLY CODE(s) 2C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and AAZT and ANTY and ABGC and ANTP and ABRB)
IF STYLE/REPLY CODE(s) 1A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTP)
IF STYLE/REPLY CODE(s) 1B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ABRB)
IF STYLE/REPLY CODE(s) 1C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTP and ABRB)
IF STYLE/REPLY CODE(s) 9 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ANTT and ANTS and ABGA and ABQM)
IF STYLE/REPLY CODE(s) 8 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ABRV and AFYS and ANTX and ABRR)
IF STYLE/REPLY CODE(s) 7 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ANTS and ABKV and ANTW and ABGA and ABQM)
IF STYLE/REPLY CODE(s) 6 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ABRV and AFYS and ANTX and ABQM and ABRR)
IF STYLE/REPLY CODE(s) 5 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and ABQM)
IF STYLE/REPLY CODE(s) 4 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ANTS and ABGA and ABKV and ANTW)
IF STYLE/REPLY CODE(s) 3 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ANTY and ABGC and AAZT and ABKV and ABGA and ANTS and ADAQ)
IF STYLE/REPLY CODE(s) 2 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV and AAZT and ANTY and ABGC)
IF STYLE/REPLY CODE(s) 1 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ABKV)
AAQLLBODY STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE BODY.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AAQLL9)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAE1313 | 1 | PLAIN ENDS |
| AAE1322 | 10 | CHAMFERED ENDS W/TWO GROOVES |
| DR02737 | 10A | CHAMFERED ENDS W/TWO GROOVES |
| DR02738 | 10B | CHAMFERED ENDS W/TWO GROOVES |
| DR02739 | 10C | CHAMFERED ENDS W/TWO GROOVES |
| AAE1323 | 11 | PLAIN END W/TWO GROOVES |
| DR02740 | 11A | PLAIN END W/TWO GROOVES |
| DR02741 | 11B | PLAIN END W/TWO GROOVES |
| DR02742 | 11C | PLAIN END W/TWO GROOVES |
| AAE1324 | 12 | PLAIN END W/ONE GROOVE |
| DR02743 | 12A | PLAIN END W/ONE GROOVE |
| DR02744 | 12B | PLAIN END W/ONE GROOVE |
| DR02745 | 12C | PLAIN END W/ONE GROOVE |
| AAE1325 | 13 | RADII ENDS W/TWO GROOVES |
| DR02746 | 13A | RADII ENDS W/TWO GROOVES |
| DR02747 | 13B | RADII ENDS W/TWO GROOVES |
| DR02748 | 13C | RADII ENDS W/TWO GROOVES |
| AAE1326 | 14 | RADII ENDS W/ONE GROOVE |
| DR02749 | 14A | RADII ENDS W/ONE GROOVE |
| DR02750 | 14B | RADII ENDS W/ONE GROOVE |
| DR02751 | 14C | RADII ENDS W/ONE GROOVE |
| AAE1327 | 15 | RADII ENDS |
| DR02752 | 15A | RADII ENDS |
| DR02753 | 15B | RADII ENDS |
| DR02754 | 15C | RADII ENDS |
| AAE1328 | 16 | RADII ENDS W/RADIAL SLOT |
| DR02755 | 16A | RADII ENDS W/RADIAL SLOT |
| DR02756 | 16B | RADII ENDS W/RADIAL SLOT |
| DR02757 | 16C | RADII ENDS W/RADIAL SLOT |
| AAE1329 | 17 | PLAIN ENDS W/END SLOT |
| DR02758 | 17A | PLAIN ENDS W/END SLOT |
| DR02759 | 17B | PLAIN ENDS W/END SLOT |
| DR02760 | 17C | PLAIN ENDS W/END SLOT |
| AAE1330 | 18 | PLAIN END W/END SLOT AND RADIAL SLOT |
| DR02761 | 18A | PLAIN END W/END SLOT AND RADIAL SLOT |
| DR02762 | 18B | PLAIN END W/END SLOT AND RADIAL SLOT |
| DR02763 | 18C | PLAIN END W/END SLOT AND RADIAL SLOT |
| AAE1331 | 19 | PLAIN ENDS W/TWO GROOVES AND END SLOT |
| DR02764 | 19A | PLAIN ENDS W/TWO GROOVES AND END SLOT |
| DR02765 | 19B | PLAIN ENDS W/TWO GROOVES AND END SLOT |
| DR02766 | 19C | PLAIN ENDS W/TWO GROOVES AND END SLOT |
| DR02710 | 1A | PLAIN ENDS |
| DR02711 | 1B | PLAIN ENDS |
| DR02712 | 1C | PLAIN ENDS |
| AAE1314 | 2 | PLAIN ENDS W/FLAT SLOT |
| AAE1332 | 20 | CHAMFERED ENDS W/END SLOT |
| DR02767 | 20A | CHAMFERED ENDS W/END SLOT |
| DR02768 | 20B | CHAMFERED ENDS W/END SLOT |
| DR02769 | 20C | CHAMFERED ENDS W/END SLOT |
| AAE1333 | 21 | CHAMFERED ENDS W/END SLOT AND RADIAL SLOT |
| DR02770 | 21A | CHAMFERED ENDS W/END SLOT AND RADIAL SLOT |
| DR02771 | 21B | CHAMFERED ENDS W/END SLOT AND RADIAL SLOT |
| DR02772 | 21C | CHAMFERED ENDS W/END SLOT AND RADIAL SLOT |
| DR02713 | 2A | PLAIN ENDS W/FLAT SLOT |
| DR02714 | 2B | PLAIN ENDS W/FLAT SLOT |
| DR02715 | 2C | PLAIN ENDS W/FLAT SLOT |
| AAE1315 | 3 | PLAIN ENDS W/FLAT AND RADIAL SLOT |
| DR02716 | 3A | PLAIN ENDS W/FLAT AND RADIAL SLOT |
| DR02717 | 3B | PLAIN ENDS W/FLAT AND RADIAL SLOT |
| DR02718 | 3C | PLAIN ENDS W/FLAT AND RADIAL SLOT |
| AAE1316 | 4 | PLAIN ENDS W/RADIAL SLOT |
| DR02719 | 4A | PLAIN ENDS W/RADIAL SLOT |
| DR02720 | 4B | PLAIN ENDS W/RADIAL SLOT |
| DR02721 | 4C | PLAIN ENDS W/RADIAL SLOT |
| AAE1317 | 5 | CHAMFERED ENDS |
| DR02722 | 5A | CHAMFERED ENDS |
| DR02723 | 5B | CHAMFERED ENDS |
| DR02724 | 5C | CHAMFERED ENDS |
| AAE1318 | 6 | CHAMFERED END W/WOODRUFF KEYWAY |
| DR02725 | 6A | CHAMFERED END W/WOODRUFF KEYWAY |
| DR02726 | 6B | CHAMFERED END W/WOODRUFF KEYWAY |
| DR02727 | 6C | CHAMFERED END W/WOODRUFF KEYWAY |
| AAE1319 | 7 | CHAMFERED ENDS W/RADIAL SLOT |
| DR02728 | 7A | CHAMFERED ENDS W/RADIAL SLOT |
| DR02729 | 7B | CHAMFERED ENDS W/RADIAL SLOT |
| DR02730 | 7C | CHAMFERED ENDS W/RADIAL SLOT |
| AAE1320 | 8 | PLAIN ENDS W/WOODRUFF KEYWAY |
| DR02731 | 8A | PLAIN ENDS W/WOODRUFF KEYWAY |
| DR02732 | 8B | PLAIN ENDS W/WOODRUFF KEYWAY |
| DR02733 | 8C | PLAIN ENDS W/WOODRUFF KEYWAY |
| AAE1321 | 9 | CHAMFERED ENDS W/ONE GROOVE |
| DR02734 | 9A | CHAMFERED ENDS W/ONE GROOVE |
| DR02735 | 9B | CHAMFERED ENDS W/ONE GROOVE |
| DR02736 | 9C | CHAMFERED ENDS W/ONE GROOVE |
AAZT*JSLOT DEPTH
THE MEASUREMENT BETWEEN SPECIFIED POINTS OF THE SLOT,IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAZTJAB2.0*;AAZTJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGA*JGROOVE DEPTH
A MEASUREMENT BETWEEN SPECIFIED POINTS OF A GROOVE,IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGAJAA2.0*;ABGAJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGC*JSLOT WIDTH
THE DISTANCE,MEASURED ALONG A STRAIGHT LINE PERPENDICULAR TO THE LONGITUDINAL AXIS OF THE SLOT,FROM ONE EDGE TO THE OTHER.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGCJAC2.0*;ABGCJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGG*JRADIUS
THE DISTANCE FROM THE CENTERLINE TO THE AXIS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGGJAB2.0*;ABGGJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKV*JOUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKVJAA2.0*;ABKVJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABRR*JKEYWAY WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF A KEYWAY,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRRJAC2.0*;ABRRJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABRV*JKEYWAY DEPTH
A MEASUREMENT FROM THE TOP SURFACE TO THE BOTTOM OF THE KEYWAY GROOVE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRVJAC2.0*;ABRVJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAQ*JBODY LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE BODY,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAQJAC2.0*;ADAQJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFYS*JKEYWAY LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF A KEYWAY,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFYSJAC2.0*;AFYSJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ANTS*JRADIAL GROOVE RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ANTSJAA2.0*;ANTSJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ANTT*JDISTANCE FROM END TO GROOVE CENTER
THE DISTANCE FROM THE CENTER OF THE GROOVE TO THE END OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ANTTJAB2.0*;ANTTJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ANTW*JDISTANCE FROM END TO SLOT CENTER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ANTWJAC2.0*;ANTWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ANTX*JDISTANCE FROM END TO KEYWAY CENTER
THE DISTANCE FROM THE END OF THE ITEM TO THE CENTER OF THE KEYWAY.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ANTXJAA2.0*;ANTXJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ANTY*JDISTANCE FROM END TO SLOT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ANTYJAB2.0*;ANTYJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ANTZ*JDISTANCE BETWEEN GROOVE CENTERS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ANTZJAC2.0*;ANTZJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABQM*BEND CHAMFER ANGLE IN DEG
NONE. REPLACED BY MRC AATE WITH ISAC 0368.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ABQMB2.0)
IF STYLE/REPLY CODE(s) 11 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (AAWY and ABND and AAWZ and AGWJ and AGWK and AATA)
IF STYLE/REPLY CODE(s) 10 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (ANWB and ABXV and AATA)
IF STYLE/REPLY CODE(s) 1 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (ABXV and AATA)
IF STYLE/REPLY CODE(s) 2 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (AGWK and AGWJ and ABND)
IF STYLE/REPLY CODE(s) 3 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (ABXV and AAWY and AAWZ)
IF STYLE/REPLY CODE(s) 4 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (ABXV and ANWB)
IF STYLE/REPLY CODE(s) 5 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (ABXV and ANWC)
IF STYLE/REPLY CODE(s) 6 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (AAWY and AGWK and ABND and AGWJ and AAWZ)
IF STYLE/REPLY CODE(s) 7 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (ABXV)
IF STYLE/REPLY CODE(s) 8 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (ABXV and AAWZ and AAWY and AATA)
IF STYLE/REPLY CODE(s) 9 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (AGWJ and ABND and AGWK and AATA)
ANTP*LBORE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE BORE.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(ANTPL3)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAE1334 | 1 | INSIDE CHAMFER STRAIGHT-THRU BORE |
| AAE1342 | 10 | INSIDE CHAMFER AND SOLID CENTER |
| AAE1343 | 11 | INSIDE CHAMFER, TAPERED AND COUNTERBORED |
| AAE1335 | 2 | TAPERED BORE |
| AAE1350 | 3 | COUNTERBORED |
| AAE1336 | 4 | SOLID CENTER |
| AAE1337 | 5 | INSIDE RADII STRAIGHT-THRU BORE |
| AAE1338 | 6 | TAPERED AND COUNTERBORED |
| AAE1339 | 7 | STRAIGHT-THRU BORE |
| AAE1340 | 8 | INSIDE CHAMFER AND COUNTERBORED |
| AAE1341 | 9 | INSIDE CHAMFER AND TAPERED BORE |
AAWY*JCOUNTERBORE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A COUNTERBORED PORTION OF A HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAWYJAA2.0*;AAWYJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AAWZ*JCOUNTERBORE DEPTH
THE DEPTH OF THE PROCESS USED TO ENLARGE PART OF A HOLE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAWZJAC2.0*;AAWZJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABND*JTAPER LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE TAPERED PORTION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABNDJAB2.0*;ABNDJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABXV*JBORE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR BORE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABXVJAC2.0*;ABXVJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGWJ*JBORE SMALLEST DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE SMALLEST DIAMETER OF A BORE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGWJJAB2.0*;AGWJJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGWK*JLARGEST BORE DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGWKJAC2.0*;AGWKJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ANWB*JBORE DEPTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ANWBJAB2.0*;ANWBJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ANWC*JBORE RADIUS
A MEASUREMENT OF THE DISTANCE FROM THE BORE CENTER TO THE INSIDE SURFACE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ANWCJAC2.0*;ANWCJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AATA*BCOUNTERSINK ANGLE IN DEG
THE INCLUDED ANGLE OF THE COUNTERSINK,EXPRESSED IN DEGREES.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AATAB2.0)
IF STYLE/REPLY CODE(s) 1 OR 5 WERE ENTERED FOR MRC ABRB, YOU MUST ANSWER MRC (AAZQ and AAUB and ABRE)
IF STYLE/REPLY CODE(s) 2 OR 6 WERE ENTERED FOR MRC ABRB, YOU MUST ANSWER MRC (AAZQ and ABRC and ABRE and ABRF and ABRD)
IF STYLE/REPLY CODE(s) 3 WERE ENTERED FOR MRC ABRB, YOU MUST ANSWER MRC (AAUB and ABRE)
IF STYLE/REPLY CODE(s) 4 WERE ENTERED FOR MRC ABRB, YOU MUST ANSWER MRC (ABRC and ABRE and ABRF and ABRD)
ABRB*LHOLE ARRANGEMENT STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE ARRANGEMENT OF THE HOLES.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(ABRBL4)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAE1344 | 1 | ONE HOLE THRU ONE SIDE OF BORE |
| AAE1345 | 2 | TWO HOLES THRU ONE SIDE OF BORE |
| AAE1346 | 3 | ONE HOLE THRU PIN |
| AAE1347 | 4 | TWO HOLES THRU PIN |
| AAE1348 | 5 | ONE HOLE IN SOLID PIN |
| AAE1349 | 6 | TWO HOLES IN SOLID PIN |
AAUB*JHOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAUBJAC2.0*;AAUBJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AAZQ*JHOLE DEPTH
A MEASUREMENT BETWEEN SPECIFIED POINTS OF THE HOLE,IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAZQJAC2.0*;AAZQJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABRC*JFIRST HOLE DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRCJAB2.0*;ABRCJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABRD*JSECOND HOLE DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRDJAA2.0*;ABRDJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABRE*JDISTANCE FROM CENTERLINE OF HOLE TO END OF PIN
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABREJAA2.0*;ABREJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABRF*JCENTER TO CENTER DISTANCE BETWEEN HOLES
THE CENTER TO CENTER DISTANCE BETWEEN HOLES ON THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRFJAA2.0*;ABRFJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) AB OR AC WERE ENTERED FOR MRC ANTQ, YOU MUST ANSWER MRC (ABHP and MATT)
ANTQ*DPLUG TYPE
INDICATES THE TYPE OF PLUG PROVIDED.
Enter the applicable reply code from the table below
(ANTQDAB)
| Table 1 |
| Reply Code (AK12) | Reply |
| AB | OIL SEALING |
| AC | PIN RETAINING |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAA2.0*;ABHPJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
BBRG*DSTORAGE TYPE
INDICATES THE TYPE OF STORAGE SPACE REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(BBRGDAE*;BBRGDAD$DAN*)
| Table 1 |
| Reply Code (AM81) | Reply |
| AC | CLOSED SHED |
| AD | CONTROLLED HUMIDITY WAREHOUSE |
| AM | DEHUMIDIFIED WAREHOUSE |
| AE | GENERAL PURPOSE WAREHOUSE |
| AN | HEATED WAREHOUSE |
| AH | OPEN SHED |
| AJ | UNHEATED WAREHOUSE |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(ZZZPJ81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDAZA000*;PRMTDRHA000$$DPDA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJIRA000R2.0*;PMWTJIRA000R2.0$$JIRA000R2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJPDA0002.0*;PMLCJPDA0002.0$JPDA0002.0*;PMLCJPDA0002.0$$JPDA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCC2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information