A rigid item designed to provide low thermal conductivity. It is composed of one or more kinds of granules and/or fiber with binder added, and has no specific surface perforations, fissures, slots or the like. It is supplied in lengths up to and including 36 inches (914.4 mm). For longer items, see INSULATION BOARD, THERMAL. Excludes:BUILDING BOARD (as modified); MILLBOARD, ASBESTOS; ASBESTOS SHEET, COMPRESSED; CORK SHEET; CORK AND RUBBER SHEET; and FIBERBOARD (as modified). See also INSULATION BLANKET, THERMAL.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED15117*)
IF STYLE/REPLY CODE(s) AAA032, ASA000, CKA000, CSA000, GSA000, GSB000, MWB000, PCA000, PCAD00, PCAH00, PCCA00, RCB000, ZRA000 OR ZTA000 WERE ENTERED FOR MRC MATT, YOU MUST ANSWER MRC (ATAG)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AEEDPCAD00*;MATT3AEEDPCAD00$DGSB000*;MATT3AEEDPCAD00$$DGSB000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CIL | COATING |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ASA000 | ASBESTOS |
| CSA000 | CELLULOSE |
| ZTA000 | CERAMIC FIBER |
| CKA000 | CORK |
| GSA000 | GLASS |
| GSB000 | GLASS FIBER |
| AAA032 | GLASS FOAM |
| MWB000 | MINERAL FIBER |
| PCA000 | PLASTIC |
| PCCA00 | PLASTIC FOAM |
| PCAD00 | PLASTIC POLYSTYRENE |
| PCAH00 | PLASTIC POLYURETHANE |
| RCB000 | RUBBER SYNTHETIC |
| ZRA000 | ZIRCONIUM SILICATE |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CIL | COATING |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
ATAG*GBASIC MATERIAL PERCENTAGE
THE PERCENTAGE AND TYPES OF MATERIALS USED IN THE ITEM. MRC DISCONTINUED WITH NO REPLACEMENT ON 01/12/2024.
Enter clear text.
(ATAGGCLEARTEXT)
ADUMJOVERALL THICKNESS
AN OVERALL MEASUREMENT OF THE SMALLEST DIMENSION OF AN ITEM,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADUMJAA2.0*;ADUMJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BDBQJCOVERAGE WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE AREA THE ITEM IS DESIGNED TO COVER,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BDBQJAC2.0*;BDBQJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMKJOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAC2.0*;ABMKJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BDBRJCOVERAGE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN AREA THE ITEM IS DESIGNED TO COVER,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BDBRJAB2.0*;BDBRJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABHPJOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAB2.0*;ABHPJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BDBGGMAXIMUM THERMAL CONDUCTIVITY
THE MAXIMUM RATE OF HEAT FLOW THAT PASSES THROUGH A UNIT AREA AT A GIVEN TEMPERATURE.
Enter clear text.
(BDBGGCLEARTEXT)
ADTE*LJOINT STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE JOINT.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(ADTEL9*;ADTEL7$L13*)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAK1707 | 1 | SCOOP BEVELED SHIPLAPPED JOINT |
| AAK1716 | 10 | SQUARE RECESS JOINT |
| AAK1717 | 11 | TONGUE AND GROOVED JOINT |
| AAK1718 | 12 | TONGUE AND GROOVED JOINT |
| AAK1719 | 13 | BEVELED TONGUE AND GROOVED JOINT |
| AAK1720 | 14 | OFFSET JOINT |
| AAK1721 | 15 | V-TYPE TONGUE AND GROOVED JOINT |
| AAK1722 | 16 | CONCEALED NAILING JOINT |
| AAK1723 | 17 | BLIND NAILING EDGE JOINT |
| AAK1724 | 18 | BEVELED LAPPED JOINT |
| AAK1725 | 19 | LOK-GRIP JOINT |
| AAK1708 | 2 | SHIPLAPPED JOINT |
| AAK1726 | 20 | CORRUGATED LAPPED JOINT |
| AAK1727 | 21 | ROUNDED EDGE JOINT |
| AAK1728 | 22 | TAPERED BUTT JOINT |
| AAK1729 | 23 | BEVELED AND KERFED BUTT JOINT |
| AAK1709 | 3 | INTERLOCKING JOINT |
| AAK1710 | 4 | V-W JOINT |
| AAK1711 | 5 | V-W JOINT |
| AAK1712 | 6 | BEVELED BUTT JOINT |
| AAK1713 | 7 | BUTT JOINT |
| AAK1714 | 8 | BEVELED SHIPLAPPED JOINT |
| AAK1715 | 9 | BEVELED RECESS JOINT |
BDNR*LLONG EDGE JOINT STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE LONG EDGE JOINT.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(BDNRL11*;BDNRL5$L4*)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAK1707 | 1 | SCOOP BEVELED SHIPLAPPED JOINT |
| AAK1716 | 10 | SQUARE RECESS JOINT |
| AAK1717 | 11 | TONGUE AND GROOVED JOINT |
| AAK1718 | 12 | TONGUE AND GROOVED JOINT |
| AAK1719 | 13 | BEVELED TONGUE AND GROOVED JOINT |
| AAK1720 | 14 | OFFSET JOINT |
| AAK1721 | 15 | V-TYPE TONGUE AND GROOVED JOINT |
| AAK1722 | 16 | CONCEALED NAILING JOINT |
| AAK1723 | 17 | BLIND NAILING EDGE JOINT |
| AAK1724 | 18 | BEVELED LAPPED JOINT |
| AAK1725 | 19 | LOK-GRIP JOINT |
| AAK1708 | 2 | SHIPLAPPED JOINT |
| AAK1726 | 20 | CORRUGATED LAP JOINT |
| AAK1727 | 21 | ROUNDED EDGE JOINT |
| AAK1728 | 22 | TAPERED BUTT JOINT |
| AAK1729 | 23 | BEVELED AND KERFED BUTT JOINT |
| AAK1709 | 3 | INTERLOCKING JOINT |
| AAK1710 | 4 | V-W JOINT |
| AAK1711 | 5 | V-W JOINT |
| AAK1712 | 6 | BEVELED BUTT JOINT |
| AAK1713 | 7 | BUTT JOINT |
| AAK1714 | 8 | BEVELED SHIPLAPPED JOINT |
| AAK1715 | 9 | BEVELED RECESS JOINT |
BDNS*LSHORT EDGE JOINT STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE SHORT EDGE JOINT.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(BDNSL15*;BDNSL8$L12*)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAK1707 | 1 | SCOOP BEVELED SHIPLAPPED JOINT |
| AAK1716 | 10 | SQUARE RECESS JOINT |
| AAK1717 | 11 | TONGUE AND GROOVED JOINT |
| AAK1718 | 12 | TONGUE AND GROOVED JOINT |
| AAK1719 | 13 | BEVELED TONGUE AND GROOVED JOINT |
| AAK1720 | 14 | OFFSET JOINT |
| AAK1721 | 15 | V-TYPE TONGUE AND GROOVED JOINT |
| AAK1722 | 16 | CONCEALED NAILING JOINT |
| AAK1723 | 17 | BLIND NAILING EDGE JOINT |
| AAK1724 | 18 | BEVELED LAPPED JOINT |
| AAK1725 | 19 | LOK-GRIP JOINT |
| AAK1708 | 2 | SHIPLAPPED JOINT |
| AAK1726 | 20 | CORRUGATED LAPPED JOINT |
| AAK1727 | 21 | ROUNDED EDGE JOINT |
| AAK1728 | 22 | TAPERED BUTT JOINT |
| AAK1729 | 23 | BEVELED AND KERFED BUTT JOINT |
| AAK1709 | 3 | INTERLOCKING JOINT |
| AAK1710 | 4 | V-W JOINT |
| AAK1711 | 5 | V-W JOINT |
| AAK1712 | 6 | BEVELED BUTT JOINT |
| AAK1713 | 7 | BUTT JOINT |
| AAK1714 | 8 | BEVELED SHIPLAPPED JOINT |
| AAK1715 | 9 | BEVELED RECESS JOINT |
BDNTDFLAMEPROOF FEATURE
AN INDICATION OF WHETHER OR NOT A FLAMEPROOF FEATURE IS INCLUDED.
Enter the applicable reply code from the table below
(BDNTDC*;BDNTDB$DB*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC BDNW, YOU MUST ANSWER MRC (AQDY and MATT)
BDNWDWATER REPELLENT COATED SURFACE
AN INDICATION OF WHETHER OR NOT THE SURFACE IS PROVIDED WITH A WATER REPELLENT COATING.
Enter the applicable reply code from the table below
(BDNWDB*;BDNWDC$DC*)
| Table 1 |
| Reply Code (AB22) | Reply |
| C | NOT PROVIDED |
| B | PROVIDED |
AQDY*DCOATING MATERIAL LOCATION
INDICATES THE LOCATION ON THE ITEM TO WHICH A COATING HAS BEEN APPLIED.
Enter the applicable reply code from the table below
(AQDYDADD*;AQDYDADC$DBLL*;AQDYDADC$$DBLL*)
| Table 1 |
| Reply Code (AJ91) | Reply |
| BLL | BOTH EDGES |
| ADC | BOTH SIDES |
| ADD | ONE SIDE |
IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC BDNX, YOU MUST ANSWER MRC (BFRK)
BDNXDONE SIDE DECORATION PROVISION
AN INDICATION OF WHETHER OR NOT A PROVISION FOR ONE SIDE DECORATION IS PROVIDED.
Enter the applicable reply code from the table below
(BDNXDC*;BDNXDB$DC*)
| Table 1 |
| Reply Code (AB22) | Reply |
| C | NOT PROVIDED |
| B | PROVIDED |
BFRK*DDECORATIVE SIDE TYPE
INDICATES THE TYPE OF DECORATIVE SIDE PROVIDED.
Enter the applicable reply code from the table below
(BFRKDAF*;BFRKDFM$DFN*)
| Table 1 |
| Reply Code (AA62) | Reply |
| AF | FELTED |
| FL | FIBER GLASS CLOTH-COATED |
| FM | GRANULAR |
| FN | SANDED |
| FP | SIZED |
BDNY*DDECORATIVE SIDE COLOR
THE HUE OR TINT OF THE DECORATIVE SIDE.
Enter the applicable reply code from the table below
(BDNYDBU0123*;BDNYDGY0017$DVY0000*;BDNYDGY0017$$DVY0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| BE0000 | BEIGE |
| BE0002 | BEIGE, HONEY |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BU0142 | BLUE BLACK |
| BU0122 | BLUE, MALLARD |
| BU0123 | BLUE, MIST |
| BU0124 | BLUE, PASTEL |
| BR0000 | BROWN |
| BR0007 | BROWN, AUTUMN |
| BR0026 | BROWN, PASTEL |
| MS0013 | BUFF |
| PK0008 | CORAL |
| PK0022 | CORAL, DUSTY |
| PK0023 | CORAL, PASTEL |
| GR0022 | EVERGREEN |
| GY0043 | GRAY, CHATEAU |
| GY0045 | GRAY, DARK GULL, 36231, FED STD 595, SUPPLEMENTED BY MIL-STD-795 |
| GY0011 | GRAY, GULL |
| GY0046 | GRAY, MIST |
| GY0047 | GRAY, NATURAL |
| GY0044 | GRAY, PASTEL |
| GY0017 | GRAY, PEARL |
| GY0019 | GRAY, SILVER |
| GY0048 | GRAY, TWILIGHT |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0012 | GREEN, ANTIQUE |
| GR0099 | GREEN, ARBOR |
| GR0100 | GREEN, CASCADE |
| GR0020 | GREEN, DARK |
| GR0101 | GREEN, FIR |
| GR0026 | GREEN, GRAY |
| GR0104 | GREEN, IVY |
| GR0032 | GREEN, LIGHT |
| GR0082 | GREEN, MOSS |
| GR0004 | GREEN, NATURAL |
| GR0049 | GREEN, PASTEL |
| GR0102 | GREEN, POPLAR |
| GR0040 | GREEN, SPRUCE |
| GR0103 | GREEN, VICTORY |
| VY0000 | IVORY |
| NA0000 | NATURAL |
| RE0000 | RED |
| RE0032 | RED RUST |
| RE0011 | RED, CARDINAL |
| RE0035 | RED, DARK |
| RE0045 | RED, DEEP |
| RE0096 | RED, MIST |
| RE0097 | RED, PASTEL |
| RE0098 | RED, TILE |
| SL0003 | SILVER, MIST |
| MS0105 | SKY, FED STD 595, 34424 |
| TA0000 | TAN |
| TA0007 | TAN, MIST |
| TA0008 | TAN, PASTEL |
| WH0000 | WHITE |
| WH0049 | WHITE, ALASKA |
| WH0010 | WHITE, ANTIQUE |
| WH0084 | WHITE, OYSTER |
ABJHJTEMP RATING
A VALUE WHICH EXPRESSES THE DEGREE OF HEAT OR COLD AS APPLIED TO THE OPERATION,OR LIMITATION OF OPERATION,OF AN ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit as in the first and second examples.For negative temperature values, precede the numeric portion of the reply with the letter “M” as in the third and fourth examples.If ISAC coding is authorized for this requirement and one or more of the temperature values in negative, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.Also precede the numeric portion of the reply with the letter “M” as in the fifth and sixth examples.
(ABJHJF68.0*; ABJHJC0.0$$JC35.0*; ABJHJFCM15.0*; ABJHJFM40.0$$JF75.0*; ABJH1BJFM25.0*; ABJH1BJCM35.0$$JCM5.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
BDNZJDENSITY RATING
AN INDICATION OF THE RATED DENSITY OF THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BDNZJDB2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| DB | KILOGRAMS PER CUBIC METER |
| DA | POUNDS PER CUBIC FOOT |
AGXZ*DUNIT PACKAGE TYPE
INDICATES THE TYPE OF CONTAINER IN WHICH THE ITEM OF SUPPLY IS PACKAGED. PLEASE USE MRC ALQG IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable reply code from the table below
(AGXZDGL*;AGXZDAB$DAB*)
| Table 1 |
| Reply Code (AE96) | Reply |
| AB | BOX |
| GL | BUNDLE |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDCLM*;CBBLDCPB$$DCPB*)
| Table 1 |
| Reply Code (AN47) | Reply |
| CLM | COATED |
| CPB | WATER REPELLENT |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
IF STYLE/REPLY CODE(s) AU, BL, BS, BY, BZ OR NU WERE ENTERED FOR MRC ENAC, YOU MUST ANSWER MRC (ALAX)
IF STYLE/REPLY CODE(s) EF, EH, EJ, EK, EL OR JH WERE ENTERED FOR MRC ENAC, YOU MUST ANSWER MRC (PTRM)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDNU*;ENACDGP$$DAU*)
| Table 1 |
| Reply Code (EN02) | Reply |
| AU | COMPOSITE PANELS - ACCOUSTICAL - BIOBASED |
| BL | COMPOSITE PANELS - INTERIOR PANELS - BIOBASED |
| BS | COMPOSITE PANELS - PLASTIC LUMBER - BIOBASED |
| BY | COMPOSITE PANELS - STRUCTURAL INTERIOR PANELS - BIOBASED |
| BZ | COMPOSITE PANELS - STRUCTURAL WALL PANELS - BIOBASED |
| EF | COMPREHENSIVE PROCUREMENT GUIDELINE - CONSTRUCTION PRODUCTS - BUILDING INSULATION PRODUCTS |
| EH | COMPREHENSIVE PROCUREMENT GUIDELINE - CONSTRUCTION PRODUCTS - CEMENT AND CONCRETE CONTAINING COAL FLY ASH |
| EJ | COMPREHENSIVE PROCUREMENT GUIDELINE - CONSTRUCTION PRODUCTS - CEMENT AND CONCRETE CONTAINING GROUND GRANULATED BLAST-FURNACE SLAG |
| EL | COMPREHENSIVE PROCUREMENT GUIDELINE - CONSTRUCTION PRODUCTS - LAMINATED PAPERBOARD |
| EK | COMPREHENSIVE PROCUREMENT GUIDELINE - CONSTRUCTION PRODUCTS - STRUCTURAL FIBERBOARD |
| JH | COMPREHENSIVE PROCUREMENT GUIDELINE - PAPER AND PAPER PRODUCTS - MISCELLANEOUS PAPERS |
| GP | ENERGY EFFICIENT - FEMP - CONSTRUCTION PRODUCTS - ROOF PRODUCTS |
| NU | PACKING AND INSULATING MATERIALS - BIOBASED |
| NR | REVIEWED - DOES NOT MEET SOME ENAC CRITERIA |
ALAX*BBIOBASED CONTENT PERCENTAGE
THE STATED PERCENTAGE OF THE ITEM'S CONTENT THAT IS BIOBASED.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ALAXB2.0)
PTRM*BTOTAL RECOVERED MATERIALS PERCENTAGE
THE PERCENTAGE OF THE TOTAL RECOVERED OR RECYCLED MATERIAL, FROM MANUFACTURING PROCESSES OR CONSUMER, INCLUDED IN THE ITEM.
Enter a reply with a minimum of one digit on either side of the decimal point.
(PTRMB2.0)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
AWJN*JUNPACKAGED UNIT WEIGHT
THE MEASURED WEIGHT OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING MATERIAL. PLEASE USE MRC CTJS IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AWJNJAJ2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| AJ | KILOGRAMS |
| AS | POUNDS |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(ZZZPJ81A37-30624A*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ019*;HZRDDHAZ042$$DHAZ042*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ042 | ASBESTOS |
| HAZ019 | FIBER VEGETABLE |
SHPN*ADOT PROPER SHIPPING NAME
THE PROPER SHIPPING NAME AS IDENTIFIED BY THE DEPARTMENT OF TRANSPORTATION (DOT) AND LISTED IN THE TITLE 49 CODE OF FEDERAL REGULATIONS (CFR), PART 172, HAZARDOUS MATERIALS TABLE.
Enter the alpha-numeric reply with a minimum of one character.
(SHPNAC5)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information