A portable desk of various cabinet forms designed for field use. It is normally fabricated to permit collapsing into a compact, readily transportable unit. Construction may be one-piece or sectional. The writing surface may be provided by a drop lid permanently hinged to the body, a removable cover, or other assembly structures.
expandFSC Information
7110Office Furniture
expandColloquial Information
No Colloquials assigned to this Approve Item Name at this time
expandChange List
ISAC Reply 3AEE added to MRC CBCL.
ISAC Reply 3DMX added to MRC CBCL.
ISAC Reply 3HOU added to MRC CBCL.
ISAC Reply 2CK deleted from MRC CBCL.
ISAC Reply 2CL deleted from MRC CBCL.
ISAC Reply 2CM deleted from MRC CBCL.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3AFG added to MRC MATT.
ISAC Reply 3AFG added to MRC MATT.
ISAC Reply 3BAU added to MRC MATT.
ISAC Reply 3BAU added to MRC MATT.
ISAC Reply 3CZZ added to MRC MATT.
ISAC Reply 3CZZ added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 2AB deleted from MRC MATT.
ISAC Reply 2AH deleted from MRC MATT.
ISAC Reply 2BG deleted from MRC MATT.
ISAC Reply 2CS deleted from MRC MATT.
ISAC Reply 2DN deleted from MRC MATT.
ISAC Reply 2DW deleted from MRC MATT.
ISAC Reply 2EF deleted from MRC MATT.
ISAC Reply 2EY deleted from MRC MATT.
ISAC Reply 2FK deleted from MRC MATT.
ISAC Reply 2FL deleted from MRC MATT.
ISAC Reply 2FP deleted from MRC MATT.
ISAC Reply 2FZ deleted from MRC MATT.
ISAC Reply 2KE deleted from MRC MATT.
ISAC Reply 2LM deleted from MRC MATT.
ISAC Reply 2LU deleted from MRC MATT.
ISAC Reply 2MM deleted from MRC MATT.
ISAC Reply 2MN deleted from MRC MATT.
ISAC Reply 2MP deleted from MRC MATT.
ISAC Reply 2MQ deleted from MRC MATT.
ISAC Reply 2MR deleted from MRC MATT.
ISAC Reply 2MS deleted from MRC MATT.
ISAC Reply 2MT deleted from MRC MATT.
ISAC Reply 2MU deleted from MRC MATT.
ISAC Reply 2MV deleted from MRC MATT.
ISAC Reply 2MW deleted from MRC MATT.
ISAC Reply 2MX deleted from MRC MATT.
ISAC Reply 2MY deleted from MRC MATT.
ISAC Reply 2MZ deleted from MRC MATT.
ISAC Reply 2NA deleted from MRC MATT.
ISAC Reply 2NB deleted from MRC MATT.
ISAC Reply 2NC deleted from MRC MATT.
ISAC Reply 2ND deleted from MRC MATT.
ISAC Reply 2NE deleted from MRC MATT.
ISAC Reply 2NF deleted from MRC MATT.
ISAC Reply 2NG deleted from MRC MATT.
ISAC Reply 2NH deleted from MRC MATT.
ISAC Reply 2NJ deleted from MRC MATT.
ISAC Reply 2RS deleted from MRC MATT.
ISAC Reply 2WS deleted from MRC MATT.
ISAC Reply 2AB deleted from MRC SFTT.
ISAC Reply 2AH deleted from MRC SFTT.
ISAC Reply 2BG deleted from MRC SFTT.
ISAC Reply 2CS deleted from MRC SFTT.
ISAC Reply 2DN deleted from MRC SFTT.
ISAC Reply 2DW deleted from MRC SFTT.
ISAC Reply 2EF deleted from MRC SFTT.
ISAC Reply 2EY deleted from MRC SFTT.
ISAC Reply 2FK deleted from MRC SFTT.
ISAC Reply 2FL deleted from MRC SFTT.
ISAC Reply 2FP deleted from MRC SFTT.
ISAC Reply 2FZ deleted from MRC SFTT.
ISAC Reply 2KE deleted from MRC SFTT.
ISAC Reply 2LM deleted from MRC SFTT.
ISAC Reply 2LU deleted from MRC SFTT.
ISAC Reply 2MM deleted from MRC SFTT.
ISAC Reply 2MN deleted from MRC SFTT.
ISAC Reply 2MP deleted from MRC SFTT.
ISAC Reply 2MQ deleted from MRC SFTT.
ISAC Reply 2MR deleted from MRC SFTT.
ISAC Reply 2MS deleted from MRC SFTT.
ISAC Reply 2MT deleted from MRC SFTT.
ISAC Reply 2MU deleted from MRC SFTT.
ISAC Reply 2MV deleted from MRC SFTT.
ISAC Reply 2MW deleted from MRC SFTT.
ISAC Reply 2MX deleted from MRC SFTT.
ISAC Reply 2MY deleted from MRC SFTT.
ISAC Reply 2MZ deleted from MRC SFTT.
ISAC Reply 2NA deleted from MRC SFTT.
ISAC Reply 2NB deleted from MRC SFTT.
ISAC Reply 2NC deleted from MRC SFTT.
ISAC Reply 2ND deleted from MRC SFTT.
ISAC Reply 2NE deleted from MRC SFTT.
ISAC Reply 2NF deleted from MRC SFTT.
ISAC Reply 2NG deleted from MRC SFTT.
ISAC Reply 2NH deleted from MRC SFTT.
ISAC Reply 2NJ deleted from MRC SFTT.
ISAC Reply 2RS deleted from MRC SFTT.
ISAC Reply 2WS deleted from MRC SFTT.
ISAC Reply 3AEE added to MRC HUES.
ISAC Reply 3AEE added to MRC HUES.
ISAC Reply 3HOU added to MRC HUES.
ISAC Reply 3HOU added to MRC HUES.
ISAC Reply 2AB deleted from MRC HUES.
ISAC Reply 2AH deleted from MRC HUES.
ISAC Reply 2BG deleted from MRC HUES.
ISAC Reply 2CS deleted from MRC HUES.
ISAC Reply 2DN deleted from MRC HUES.
ISAC Reply 2DW deleted from MRC HUES.
ISAC Reply 2EF deleted from MRC HUES.
ISAC Reply 2EY deleted from MRC HUES.
ISAC Reply 2FK deleted from MRC HUES.
ISAC Reply 2FL deleted from MRC HUES.
ISAC Reply 2FP deleted from MRC HUES.
ISAC Reply 2FZ deleted from MRC HUES.
ISAC Reply 2KE deleted from MRC HUES.
ISAC Reply 2LM deleted from MRC HUES.
ISAC Reply 2LU deleted from MRC HUES.
ISAC Reply 2MM deleted from MRC HUES.
ISAC Reply 2MN deleted from MRC HUES.
ISAC Reply 2MP deleted from MRC HUES.
ISAC Reply 2MQ deleted from MRC HUES.
ISAC Reply 2MR deleted from MRC HUES.
ISAC Reply 2MS deleted from MRC HUES.
ISAC Reply 2MT deleted from MRC HUES.
ISAC Reply 2MU deleted from MRC HUES.
ISAC Reply 2MV deleted from MRC HUES.
ISAC Reply 2MW deleted from MRC HUES.
ISAC Reply 2MX deleted from MRC HUES.
ISAC Reply 2MY deleted from MRC HUES.
ISAC Reply 2MZ deleted from MRC HUES.
ISAC Reply 2NA deleted from MRC HUES.
ISAC Reply 2NB deleted from MRC HUES.
ISAC Reply 2NC deleted from MRC HUES.
ISAC Reply 2ND deleted from MRC HUES.
ISAC Reply 2NE deleted from MRC HUES.
ISAC Reply 2NF deleted from MRC HUES.
ISAC Reply 2NG deleted from MRC HUES.
ISAC Reply 2NH deleted from MRC HUES.
ISAC Reply 2NJ deleted from MRC HUES.
ISAC Reply 2RS deleted from MRC HUES.
ISAC Reply 2WS deleted from MRC HUES.
ISAC Reply 3AEE added to MRC NMBR.
ISAC Reply 3CZZ added to MRC NMBR.
ISAC Reply 3DAO added to MRC NMBR.
ISAC Reply 3HOU added to MRC NMBR.
ISAC Reply 2AB deleted from MRC NMBR.
ISAC Reply 2AH deleted from MRC NMBR.
ISAC Reply 2BG deleted from MRC NMBR.
ISAC Reply 2CS deleted from MRC NMBR.
ISAC Reply 2DN deleted from MRC NMBR.
ISAC Reply 2DW deleted from MRC NMBR.
ISAC Reply 2EF deleted from MRC NMBR.
ISAC Reply 2EY deleted from MRC NMBR.
ISAC Reply 2FK deleted from MRC NMBR.
ISAC Reply 2FL deleted from MRC NMBR.
ISAC Reply 2FP deleted from MRC NMBR.
ISAC Reply 2FZ deleted from MRC NMBR.
ISAC Reply 2KE deleted from MRC NMBR.
ISAC Reply 2LM deleted from MRC NMBR.
ISAC Reply 2LU deleted from MRC NMBR.
ISAC Reply 2MM deleted from MRC NMBR.
ISAC Reply 2MN deleted from MRC NMBR.
ISAC Reply 2MP deleted from MRC NMBR.
ISAC Reply 2MQ deleted from MRC NMBR.
ISAC Reply 2MR deleted from MRC NMBR.
ISAC Reply 2MS deleted from MRC NMBR.
ISAC Reply 2MT deleted from MRC NMBR.
ISAC Reply 2MU deleted from MRC NMBR.
ISAC Reply 2MV deleted from MRC NMBR.
ISAC Reply 2MW deleted from MRC NMBR.
ISAC Reply 2MX deleted from MRC NMBR.
ISAC Reply 2MY deleted from MRC NMBR.
ISAC Reply 2MZ deleted from MRC NMBR.
ISAC Reply 2NA deleted from MRC NMBR.
ISAC Reply 2NB deleted from MRC NMBR.
ISAC Reply 2NC deleted from MRC NMBR.
ISAC Reply 2ND deleted from MRC NMBR.
ISAC Reply 2NE deleted from MRC NMBR.
ISAC Reply 2NF deleted from MRC NMBR.
ISAC Reply 2NG deleted from MRC NMBR.
ISAC Reply 2NH deleted from MRC NMBR.
ISAC Reply 2NJ deleted from MRC NMBR.
ISAC Reply 2RS deleted from MRC NMBR.
ISAC Reply 2WS deleted from MRC NMBR.
MRC MDCL has been deleted
MRC STDC has been deleted
MRC HDCL has been deleted
MRC CCRJ has been deleted
MRC AFPV has been deleted
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED14938*)
ABGLJWIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGLJLC2.0*;ABGLJLC2.0$$JLC2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
AEJZJDEPTH
A LINEAR MEASUREMENT FROM THE SURFACE TO A SPECIFIED INNER POINT ON AN ITEM,IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEJZJLB2.0*;AEJZJLB2.0$$JLB2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
HGTHJHEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN OBJECT,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(HGTHJLA2.0*;HGTHJLA2.0$$JLA2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
BSMZ*JEXTENDED WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM WHEN IT IS IN AN EXTENDED POSITION,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BSMZJFB2.0*;BSMZJFB2.0$$JFB2.1*)
Table 1
Reply Code (AA05)Reply
FFEET
MMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
AJLT*JEXTENDED HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN OBJECT,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJLTJMB2.0*;AJLTJMB2.0$$JMB2.1*)
Table 1
Reply Code (AA05)Reply
FFEET
MMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
BGDW*JDRAWER LOCATION AND QUANTITY
INDICATES THE LOCATION AND NUMBER OF DRAWERS IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(BGDWJAEF2*;BGDWJAEF2$$JAEF3*;BGDWJAEF2$JAEF2*)
Table 1
Reply Code (AJ91)Reply
AWHALL
CXPAPRON
APDARM
BEZARM COVERING
DFJARM PADDING
BFAARM REST
AAZBACK
DSTBACK BORDER
BFBBACK COVERING
DRZBACK CUSHION COVERING
DRTBACK CUSHION PADDING
DXZBACK FORM
DRRBACK FRAME
DFKBACK PADDING
BEWBACK PANEL
DFABACKREST
AAXBASE
ADCBOTH SIDES
ABABOTTOM
BFFBOTTOM TO TOP CENTER
BFGBOTTOM TO TOP SIDE TO SIDE
DRMBOXING
AHPCENTER
DXSCROSS-MEMBER
BFJCUSHION COVERING
BFKCUSHION PADDING
DRXCUSHION SUPPORT
BFLDOOR
DYKDOOR FRONT
APVDRAWER BOX
DYPDRAWER FRONT
DYGEACH PEDESTAL TOP
ABKEDGE
DYSEITHER SIDE
ABBEND
AJPFLANGE
BFNFOOTBOARD
BFPFOOTREST
ABSFRAME
ABCFRONT
AEFFRONT CENTER
BEXFRONT PANEL
DSBGLIDE
BFQHEADBOARD
CLWINTERIOR
DSPLADDER
BFCLEFT BOTTOM
BGRLEFT BOTTOM TO TOP
BGDLEFT CENTER SIDE
BDLLEFT END
ACHLEFT FRONT
DYJLEFT PEDESTAL
AWNLEFT REAR
ACFLEFT SIDE
DELLEG
DYYMIRROR
DYLMODESTY PANEL
AABOVERALL
BFROVERALL EXCEPT BASE
BFSOVERALL EXCEPT CUSHION
DSCOVERALL EXCEPT DOOR
DYMOVERALL EXCEPT DOOR FRONT
DSLOVERALL EXCEPT FRAME
DSMOVERALL EXCEPT GLIDE
DYNOVERALL EXCEPT MODESTY PANEL
BFTOVERALL EXCEPT SEAT
DYWOVERALL EXCEPT SHOE
DXPOVERALL EXCEPT SMALL DRAWER FRONT COVERING
DSNOVERALL EXCEPT SPRING
BFWOVERALL EXCEPT TOP
BFXOVERALL EXCEPT TOP COVERING
DTDOVERALL EXCEPT TOP DOOR
DYFOVERALL EXCEPT TOP INSET
AGZPADDING
DRSPEDESTAL
DSXPEDESTAL COLUMN
DYBPEDESTAL TUBE
DPFPIVOT
DEQPOST
BFYRACK
DSQRAIL
BFDRIGHT BOTTOM
BGSRIGHT BOTTOM TO TOP
BGERIGHT CENTER SIDE
BFMRIGHT END
ACPRIGHT FRONT
DYHRIGHT PEDESTAL
AWQRIGHT REAR
ACRRIGHT SIDE
ACASEAT
BFZSEAT COVERING
DYQSEAT COVERING EXCEPT FACE PANEL
DSASEAT CUSHION COVERING
DRWSEAT CUSHION PADDING
DYRSEAT FACE PANEL
DSRSEAT FRAME
BGASEAT PADDING
AMBSHELL
BGCSHOE
DYTSHOE MOUNT
ACZSIDE
DYESIDE FRAME
BGFSIDE TO SIDE
BFESIDE TO SIDE BOTTOM
BFHSIDE TO SIDE CENTER
BGLSIDE TO SIDE TOP
DYXSMALL DRAWER FRONT
DXNSMALL DRAWER FRONT COVERING
DMESPINDLE
ALHSPRING
AHBSTRAP
DXYSTRETCHER
DSSTABLE FRAME
BGGTABLET ARM
ABDTOP
AQKTOP CENTER
BGHTOP COVERING
DXRTOP INSERT
BGJTOP LEFT
BHZTOP LEFT SIDE
BGKTOP RIGHT
AERTOP RIGHT SIDE
AHDTUBE
BGMUNDER THE SEAT
BGNUNDER THE TOP
BGPUPHOLSTERY
BGQUPHOLSTERY PADDING
DXQWORK SURFACE
CHWB*JACCESSORY COMPONENTS AND QUANTITY
THE NAME AND NUMBER OF ACCESSORY COMPONENTS SUPPLIED WITH THE ITEM WHICH MAY BE REQUIRED FOR APPLICATION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(CHWBJAJB2*;CHWBJAJB2$$JAJB3*;CHWBJAJB2$JAJB2*)
Table 1
Reply Code (AL37)Reply
AHVCHAIR
AHWFOLDING CHAIR
AHXFOLDING STOOL
AHYPAD LOCK
AHZPARTITION
AJAPOWER STRIP
AJBSEAT
AJCSHIPPING AND STORAGE CONTAINER
AJDSTOOL
AEPTABLE
ANNY*AQUANTITY WITHIN EACH IMMEDIATE CONTAINER
THE NUMBER OF ITEMS WITHIN EACH IMMEDIATE CONTAINER.
Enter the alpha-numeric reply with a minimum of one character.
(ANNYAK7)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
Table 1
Reply Code (AC28)Reply
ASPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
BSTANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
CDRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDGV*;ENACDGV$$DGV*)
Table 1
Reply Code (EN02)Reply
GVCOMPREHENSIVE PROCUREMENT GUIDELINE - PARK AND RECREATION PRODUCTS - PARK BENCHES AND PICNIC TABLES
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
Table 1
Reply Code (AN58)Reply
AADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD
AFJN*DFRAGILITY FACTOR
THE MEASURE OF SENSITIVITY OF THE ITEM TO BE PACKAGED. A FACTOR USED BY PACKAGING ENGINEERS IN DEVISING PROPER CUSHIONING IN A PACKAGE.
Enter the applicable reply code from the table below
(AFJNDG)
Table 1
Reply Code (AD40)Reply
DDELICATE
BEXTREMELY FRAGILE
EMODERATELY DELICATE
FMODERATELY RUGGED
GRUGGED
CVERY DELICATE
BBRG*DSTORAGE TYPE
INDICATES THE TYPE OF STORAGE SPACE REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(BBRGDAE*;BBRGDAS$$DAN*)
Table 1
Reply Code (AM81)Reply
ACCLOSED SHED
ADCONTROLLED HUMIDITY WAREHOUSE
AMDEHUMIDIFIED WAREHOUSE
ATDOCK LEVEL HEATED WAREHOUSE
AXDOCK LEVEL UNHEATED WAREHOUSE
AEGENERAL PURPOSE WAREHOUSE
ASGROUND LEVEL HEATED WAREHOUSE
AWGROUND LEVEL UNHEATED WAREHOUSE
ANHEATED WAREHOUSE
ALBY*DUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter the applicable reply code from the table below
(ALBYDABC*;ALBYDABL$$DAJQ*)
Table 1
Reply Code (AH21)Reply
AJQHOUSEHOLD
ABLOFFICE
ABCSHIPBOARD
AFJQ*JSTORAGE TEMP RANGE
THE MINIMUM AND MAXIMUM TEMPERATURES AT WHICH AN ITEM CAN BE STORED WITHOUT DETRIMENTAL EFFECT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFJQJCM32.0/P50.0*)
Table 1
Reply Code (AB36)Reply
CCELSIUS
FFAHRENHEIT
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
TEXT*GGENERAL CHARACTERISTICS ITEM DESCRIPTION
A RECORDING OF THE PHYSICAL,FUNCTIONAL,AND PERFORMANCE CHARACTERISTICS FOR AN ITEM OF SUPPLY.
Enter clear text.
(TEXTGCLEARTEXT)
EXDE*JEXTENDED DEPTH
A LINEAR MEASUREMENT FROM THE SURFACE TO A SPECIFIED INNER POINT ON AN ITEM WHEN IT IS IN AN EXTENDED POSITION, IN DISTINCTION FROM HEIGHT. MRC DISCONTINUED WITH NO REPLACEMENT ON 01/12/2024.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(EXDEJMC2.0*;EXDEJMC2.0$JMC2.0*;EXDEJMC2.0$$JMC2.1*)
Table 1
Reply Code (AA05)Reply
FFEET
MMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
IF YOU ANSWER MRC CBCL, YOU MUST ANSWER MRC (CBCM)
CBCL*DSURFACE TYPE
INDICATES THE TYPE OF SURFACE PROVIDED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CBCL3DMXDAEU*;CBCL3DMXDAEU$DAEU*;CBCL3DMXDAEU$$DAEU*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3DMXREMOVABLE COVER
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AL59)Reply
AEUWRITING
CBCM*ASURFACE QUANTITY
THE NUMBER OF SURFACES PROVIDED.
Enter the numeric reply with a minimum of one digit.
(CBCMA10*)
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAB2.0*;ABHPJAB2.0$$JAB2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAA2.0*;ABKWJAA2.0$$JAA2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAA2.0*;ABMKJAA2.0$$JAA2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
AKYD*GACCESSORY COMPONENTS AND QUANTITY
THE NAME AND NUMBER OF PARTS SUPPLIED WITH THE ITEM WHICH MAY BE REQUIRED FOR APPLICATION.
Enter clear text.
(AKYDGCLEARTEXT)
MATT*DMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AEEDWDD000*;MATT3AEEDWDD000$DZZAL00*;MATT3AEEDWDD000$$DZZAL00*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AFGBOTH SIDES
3BAUSEAT
3CZZDRAWER
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (MA01)Reply
ALA000ALUMINUM
ALB000ALUMINUM ALLOY
BND000BRONZE
CBA000CHIPBOARD
CKA000CORK
CCA000COTTON
FBB001FABRIC, NYLON
FBX000FELT
FBA000FIBER
WDA000FIBERBOARD
FG0000FIBERGLASS
GSA000GLASS
GSB000GLASS FIBER
GSL000GLASS SHEET
HRE000HAIR
RBR000HARD RUBBER
HRH000HARDWOOD
LRA000LEATHER
LRE000LEATHER ARTIFICIAL
LRG000LEATHER CATTLEHIDE
ZZAL00MARBLE
FBB000NYLON
PPE000PAPER KRAFT
PCA000PLASTIC
PCH000PLASTIC EPOXY
PCCA00PLASTIC FOAM
PCJ000PLASTIC MELAMINE
PCW000PLASTIC POLYESTER
PCAC00PLASTIC POLYPROPYLENE
PCAH00PLASTIC POLYURETHANE
PCBA00PLASTIC URETHANE
PCAP00PLASTIC VINYL
WDB000PLYWOOD
PCDA01POLYAMIDE NYLON
RAA000RATTAN
RCE000RUBBER
RCAH00RUBBER FOAM
RCW000RUBBER FOAM SYNTHETIC
RCAG00RUBBER LATEX
RCA000RUBBER NATURAL
RCB000RUBBER SYNTHETIC
SLA001SLATE
STA000STEEL
STB000STEEL CORROSION RESISTING
VY0000VINYL FOAM
WDC000WOOD
WDK000WOOD ASH
WDQ000WOOD BEECH
WDJ000WOOD BIRCH
WDA003WOOD CHERRY
WDL000WOOD MAHOGANY
WDD000WOOD MAPLE
WDR000WOOD OAK
WDA004WOOD PINE
WDA002WOOD SYCAMORE
WDE000WOOD WALNUT
ZNB000ZINC
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
Table 1
Reply Code (AN62)Reply
VFEDERAL MOTOR VEHICLE SAFETY STANDARD
FFLAMMABILITY STANDARD
SGOVERNMENT SPECIFICATION
TGOVERNMENT STANDARD
UINTERNATIONAL STD/SPEC
DMANUFACTURERS SOURCE CONTROL
RMANUFACTURERS SPECIFICATION
NMANUFACTURERS SPECIFICATION CONTROL
MMANUFACTURERS STANDARD
BNATIONAL STD/SPEC
APROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
PPROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
Table 1
Reply Code (AD08)Reply
ALALLOY
BEANNEALED
ANANNEX
APAPPENDIX
ACAPPLICABILITY CLASS
ARARRANGEMENT
ASASSEMBLY
ABASSORTMENT
BFBOND
BXBOX
CYCAPACITY
CACASE
CTCATEGORY
CFCIRCUMFERENCE
CLCLASS
CECODE
CRCOLOR
CCCOMBINATION CODE
CNCOMPONENT
CPCOMPOSITION
CMCOMPOUND
CDCONDITION
AVCONFIGURATION
CSCONSTRUCTION
BGCORE CONDITION
CBCUT OFF
AMDELAY CLASS
DEDESIGN
DGDESIGNATOR
DWDRAWING NUMBER
DUDUPLEX
EGEDGE
ENEND
FYFAMILY
FGFIGURE
AKFILE NUMBER
FNFINISH
FBFLAVOR
BHFLUX PERCENTAGE
FMFORM
FAFORMULA
AJGAGE STOCK NUMBER
GRGRADE
GAGRADUATION
AXGRANULES
AYGRIT
GBGROUND
GPGROUP
HAHEAVY DUTY
BAIMAGE COLOR
NSINSERT
TMITEM
KDKIND
KTKIT
LGLENGTH
LVLEVEL
LTLIMIT
MKMARK
AAMARKER
ADMASK APERTURE
MLMATERIAL
BBMAXIMUM DENSITY
TAMEDIUM TEMPER
MHMESH
MEMETHOD
BCMINIMUM DENSITY
MDMODEL
MTMOUNTING
AQNATURAL
AUNON-DELAY CLASS
NRNUMBER
BLOUTFIT NUMBER
PAPARAGRAPH
PTPART
PNPATTERN
PCPHYSICAL CONDITION
PSPIECE
PLPLAN
PRPOINT
PDPOLISHED
PBPRESSURE RATING
QAQUALITY
QBQUENCHED
RNRANGE
AERAPID
RTRATING
RFREFERENCE NUMBER
RAREGULAR DUTY
BJRMA FLUX
SJSALIENT CHARACTERISTICS
SCSCHEDULE
SBSECTION
SLSELECTION
BDSERIALIZED
SESERIES
SVSERVICE
SXSET
SASHADE
SHSHAPE
SGSHEET
SZSIZE
AGSLOW
TCSOFT TEMPER
SKSOURCE
PZSPECIES
SQSPECIFICATION SHEET
SDSPEED
AWSTANDARD
SRSTRAIGHT
STSTYLE
SSSUBCLASS
SFSUBFORM
SPSUBTYPE
BKSUPPORT
SNSURFACE CONDITION
SYSYMBOL
SMSYSTEM
TBTABLE
TNTANNAGE
TPTEMPER
TXTEXTURE
TKTHICKNESS
TTTREATMENT
TRTRIM
TYTYPE
YNUNIT
AZUNSERIALIZED
VAVARIETY
WTWEIGHT
WDWIDTH
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(SFTTDCHR000*;SFTTDLQG000$DVAA000*;SFTTDLQG000$$DVAA000*)
Table 1
Reply Code (SF01)Reply
ALB000ALUMINUM
ANA000ANODIZE
CDA000CADMIUM
CRA000CHROMIUM
CHR000CHROMIUM PLATED
EMB000EMBOSSED
ENA000ENAMEL
END000ENAMEL BAKED
LQA000LACQUER
LQG000LACQUER FLAT
LQH000LACQUER GLOSS
PNA000PAINT
PNC000PAINT ALUMINUM
PCA000PLASTIC
AAA014POLISHED
CLC000PORCELAIN
VAA000VARNISH
WXA000WAX
ZNA000ZINC
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(HUES3AEEDRE0035*;HUES3AEEDRE0035$DMS0342*;HUES3AEEDRE0035$$DMS0342*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AD06)Reply
AL0000ALUMINUM
AL0017ALUMINUM BRONZE
MS0008AQUA
AV0000AVOCADO
BE0000BEIGE
BE0022BEIGE, DARK
BE0011BEIGE, FED STD 595, 10324
BE0023BEIGE, SPICE
MS0205BIRCH
MS0328BIRCH, GRAY
MS0221BIRCH, LIGHT
MS0329BIRCH, NATURAL
RG0006BITTERSWEET
BL0000BLACK
BL0037BLACK, EBONY
BL0001BLACK, FED STD 595, 17038
BL0122BLACK, FED STD 595, 27040
MS0206BLOND
BU0000BLUE
BU0055BLUE GREEN
BU0005BLUE, DARK
BU0344BLUE, FED STD 595, 25090
BU0169BLUE, FLAG
BU0026BLUE, LIGHT
BU0126BLUE, MARBLEIZED
BU0033BLUE, NAVY
BU0047BLUE, SKY
BU0048BLUE, SLATE
BU0127BLUE, SMOKEY
BU0128BLUE-WHITE, MARBELED
MS0371BLUSH
MS0065BRONZE
BR0000BROWN
BR0050BROWN, ACORN
BR0007BROWN, AUTUMN
BR0008BROWN, CHOCOLATE
BR0010BROWN, DARK
BR0013BROWN, GOLDEN
BR0004BROWN, MEDIUM
BR0051BROWN, REDDISH
BR0058BROWN, SADDLE
BR0052BROWN, SPICE
MS0013BUFF
MS0207BUFF, LIGHT
MS0372CAMEL
MS0373CAMEL, DARK
MS0137CHAMPAGNE
MS0212CHAMPAGNE MAPLE
MS0015CHARCOAL
GR0044CHARTREUSE
RE0046CHERRY
RE0100CHERRY, DARK
MS0208CHESTNUT
MS0073CHROME
BR0024COCOA
PK0008CORAL
BR0025CORDOVAN
MS0374CORNSILK
CR0000CREAM
RE0012CRIMSON
MS0144DRIFTWOOD
GR0003EMERALD
BR0049FAWN
MS0209FRUITWOOD
MS0210FRUITWOOD, DARK
GL0000GOLD
GL0001GOLD, ANTIQUE
GL0017GOLD, DARK
GL0019GOLD, HARVEST
GY0006GRAY, BLUE
GY0031GRAY, FED STD 595, 16251
GY0058GRAY, FED STD 595, 26134
GY0059GRAY, FED STD 595, 26173
GY0032GRAY, FED STD 595, 26280
GY0060GRAY, FED STD 595, 36463
GY0064GRAY, GSA-FSS STD SAMPLE
GY0002GRAY, LIGHT
GY0057GRAY, LIGHT YELLOW
GY0072GRAY, NAVY
GY0017GRAY, PEARL
GY0061GRAY, PIGMENTED
GY0062GRAY, SILVER, FED STD 595, 16357
GY0000GRAY/GREY
GR0000GREEN
GR0354GREEN, BRONZE
GR0020GREEN, DARK
GR0048GREEN, DEEP
GR0117GREEN, FED STD 595, 24052
GR0356GREEN, FED STD 595, 24097
GR0094GREEN, FED STD 595, 24533
GR0101GREEN, FIR
GR0122GREEN, GSA-FSS STD SAMPLE
GR0027GREEN, HUNTER
GR0030GREEN, KELLY
GR0031GREEN, LEAF
GR0032GREEN, LIGHT
GR0115GREEN, LIGHT, AA-B-205
GR0070GREEN, MINT
GR0050GREEN, MIST
GR0082GREEN, MOSS
GR0011GREEN, OLIVE
GR0035GREEN, PALE
GR0287GREEN, PALM
GR0118GREEN, PIGMENETED
GR0037GREEN, PINE
GR0040GREEN, SPRUCE
GR0119GREEN, US MARINE CORPS
GR0042GREEN, YELLOW
GR0043GREEN, YEW
GR0120GREEN-WHITE, MARBLED
MS0213HONEY MAPLE
VY0000IVORY
KH0000KHAKI
YE0068LEMON
GR0047LIME
MS0035MAHOGANY
MS0211MAPLE
MA0000MAROON
MA0015MAROON, DARK
PU0037MAUVE
MS0103MUSTARD
NA0000NATURAL
MS0039NUTMEG
KA0000OAK
KA0002OAK, DARK
KA0005OAK, ENGLISH
KA0001OAK, LIGHT
KA0003OAK, LIMED
KA0004OAK, RANCH
LD0008OLIVE
LD0000OLIVE DRAB
LD0017OLIVE DRAB, FED STD 595, 24087
LD0002OLIVE DRAB, FED STD 595, 34087
LD0016OLIVE DRAB, FED STD 595, X14087
RG0000ORANGE
RG0033ORANGE, BURNT
RG0001ORANGE-RED
MS0045PARCHMENT
MS0336PARCHMENT, FED STD 595, 27769
PK0007PEACH
MS0214PERSIMMON
PU0039PLUM
PU0000PURPLE
RE0000RED
RE0101RED PEARL
RE0032RED RUST
RE0271RED, APPLE
RE0099RED, CLARET
RE0035RED, DARK
RE0069RED, FED STD 595, 21105
RE0042RED, LIGHT
RE0018RED, PIMENTO
RE0006ROSE
RE0195ROSE, MOSS
MS0215ROSEWOOD
RE0033RUST
RE0210RUST, FED STD 595, 22203
RG0035SAFFRON
PK0005SALMON
MS0049SAND
MS0062SAND, DESERT
MS0216SAND, MOTTLED
MS0050SANDALWOOD
RE0022SCARLET
MS0375SEAFOAM
MS0376SEAMIST
SL0000SILVER
SL0001SILVER, FED STD 595, 17178
MS0052SLATE
TA0000TAN
TA0080TAN, BRITISH
TA0010TAN, DESERT
TA0011TAN, PIGMENTED
MS0218TANGERINE
MS0054TAUPE
MS0319TEAK
MS0348TEAK, INDIAN
MS0056TERRA COTTA
TR0000TURQUOISE
MS0342UMBER
RE0063VERMILLION
VL0004VIOLET, DARK
WA0000WALNUT
WA0001WALNUT, DANISH
WA0002WALNUT, FROSTED
WA0004WALNUT, GRAIN
WA0003WALNUT, ROYAL
WH0000WHITE
WH0010WHITE, ANTIQUE
WH0033WHITE, GRAY
WH0052WHITE, GSA-FSS STD SAMPLE
WH0051WHITE, MARBLE
RE0026WINE
YE0000YELLOW
YE0038YELLOW, FED STD 595, 23655
YE0014YELLOW, GOLDEN
YE0019YELLOW, LEMON
YE0007YELLOW, OCHRE
YE0061YELLOW-RED
NMBR*AQUANTITY
A NUMERIC VALUE WHICH REPRESENTS A POSITIVE WHOLE VALUE WITHOUT REGARD TO ANY UNIT OF MEASURE.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(NMBR3DAOA10)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3CZZDRAWER
3DAOWORK SURFACE
3HOULOCATION NOT OTHERWISE SPECIFIED
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)