A self-propelled vehicle with an operating speed of 15 miles (24.14 km) per hour or more, deriving its traction power from two endless flexible tracks. It is primarily designed for towing or pushing heavy equipment. It may have an ammunition rack, a cargo body, a cargo platform, and/or various other attachments.

FSC Information

2430	Tractors, Full Tracked, High Speed

Colloquial Information

No Colloquials assigned to this Approve Item Name at this time

Change List

MRC PDNB has been added

MRC ZZZP has been deleted

NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.

Enter the item name code.

AZBGDENGINE TYPE

INDICATES THE TYPE OF ENGINE FOR WHICH THE ITEM IS DESIGNED.

Enter the applicable reply code from the table below

Table 1
	Reply Code (AG27)	Reply
	DP	DIESEL
	CH	GASOLINE

CJKQDENGINE MOUNTING LOCATION

INDICATES THE MOUNTING LOCATION OF THE ENGINE.

Enter the applicable reply code from the table below

Table 1
	Reply Code (AJ91)	Reply
	AHP	CENTER
	ABC	FRONT
	ABJ	REAR

AYMYAENGINE QUANTITY

THE NUMBER OF ENGINES PROVIDED.

Enter the numeric reply with a minimum of one digit.

BKWQAENGINE CYLINDER QUANTITY

THE NUMBER OF CYLINDERS PROVIDED IN THE ENGINE.

Enter the numeric reply with a minimum of one digit.

CJJW*GENGINE BRAKE HORSEPOWER AT SPECIFIED RPM

THE POWER DELIVERED BY THE ENGINE AT SPECIFIED REVOLUTIONS PER MINUTE.

Enter clear text.

(CJJWGCLEARTEXT)

CJKT*GENGINE TORQUE RATING AT SPECIFIED RPM

THE RATED TURNING FORCE,IN FOOT POUNDS,DELIVERED BY THE ENGINE AT SPECIFIED REVOLUTIONS PER MINUTE.

Enter clear text.

(CJKTGCLEARTEXT)

BKWRDENGINE COOLING METHOD

THE MEANS BY WHICH THE ENGINE IS COOLED.

Enter the applicable reply code from the table below

Table 1
	Reply Code (AN05)	Reply
	AAR	AIR
	AAQ	LIQUID

ATJL*GENGINE MANUFACTURER NAME

THE NAME OF THE MANUFACTURER OF THE ENGINE FURNISHED.

Enter clear text.

(ATJLGCLEARTEXT)

ASQFAENGINE MODEL NUMBER

THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE ENGINE.

Enter the alpha-numeric reply with a minimum of one character.

AXDPDSTARTING METHOD

THE MEANS USED TO START THE ITEM.

Enter the applicable reply code from the table below

Table 1
	Reply Code (AC58)	Reply
	AAGD	AUXILIARY GASOLINE ENGINE
	AAGB	ELECTRIC

CHYQJCENTER TO CENTER DISTANCE BETWEEN TRACKS

THE CENTER TO CENTER DISTANCE BETWEEN THE TRACKS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CHYQJAA2.0*;CHYQJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CJKRJTRACK WIDTH

A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE TRACK LENGTH ON THE GROUND,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CJKRJAC2.0*;CJKRJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CHYPJGROUND TRACK LENGTH

A MEASUREMENT OF THE LONGEST DIMENSION OF TRACK ON THE GROUND.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CHYPJAA2.0*;CHYPJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABHPJOVERALL LENGTH

THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABHPJAB2.0*;ABHPJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABMKJOVERALL WIDTH

AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABMKJAC2.0*;ABMKJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABKWJOVERALL HEIGHT

THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABKWJAB2.0*;ABKWJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AN INDICATION OF WHETHER OR NOT A CAB IS INCLUDED.

Enter the applicable reply code from the table below

(BXTLDB*;BXTLDC$DB*)

Table 1
	Reply Code (AA49)	Reply
	B	INCLUDED
	C	NOT INCLUDED

CJKG*DAMMUNITION COMPARTMENT

AN INDICATION OF WHETHER OR NOT AN AMMUNITION COMPARTMENT(S) IS INCLUDED.

Enter the applicable reply code from the table below

(CJKGDC*;CJKGDB$DC*)

Table 1
	Reply Code (AA49)	Reply
	B	INCLUDED
	C	NOT INCLUDED

BTRL*DCAB DESIGN

THE DESIGN OF THE CAB.

Enter the applicable reply code from the table below

Table 1
	Reply Code (AK54)	Reply
	AJN	CLOSED
	AJP	OPEN

BBDH*APERSONNEL CAPACITY

A VALUE WHICH REPRESENTS THE NUMBER OF PERSONNEL THE ITEM WILL ACCOMMODATE.

Enter the numeric reply with a minimum of one digit.

CJKH*DCARGO CARRIER TYPE

INDICATES THE TYPE OF CARGO CARRIER PROVIDED.

Enter the applicable reply code from the table below

Table 1
	Reply Code (AK54)	Reply
	A	ANY ACCEPTABLE
	EPH	BODY
	BTJ	PLATFORM

IF STYLE/REPLY CODE(s) AAC WERE ENTERED FOR MRC AXJD, YOU MUST ANSWER MRC (AXJH and ATWQ)

AXJDDTRANSMISSION TYPE

INDICATES THE TYPE OF TRANSMISSION USED TO TRANSFER DEVELOPED MECHANICAL ENERGY TO THE DRIVE UNIT.

Enter the applicable reply code from the table below

Table 1
	Reply Code (AM54)	Reply
	AAM	AUTOMATIC
	AAC	MANUAL

AXJH*AFORWARD SPEED QUANTITY

THE NUMBER OF FORWARD SPEEDS PROVIDED.

Enter the numeric reply with a minimum of one digit.

ATWQ*AREVERSE SPEED QUANTITY

THE NUMBER OF REVERSE SPEEDS PROVIDED.

Enter the numeric reply with a minimum of one digit.

BMGB*JFORWARD TRAVEL MAXIMUM SPEED

THE MAXIMUM FORWARD TRAVEL SPEED FOR WHICH THE ITEM IS RATED.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

Table 1
	Reply Code (AG67)	Reply
	GM	KILOMETERS PER HOUR
	GE	MILES PER HOUR

CJKJDTRANSMISSION DRIVE METHOD

THE MEANS USED TO DRIVE THE TRANSMISSION.

Enter the applicable reply code from the table below

(CJKJDAAQ*;CJKJDAAR$$DAAQ*)

Table 1
	Reply Code (AJ53)	Reply
	AAQ	CLUTCH
	AAR	TORQUE CONVERTER

CJKKDAIR COMPRESSOR

AN INDICATION OF WHETHER OR NOT AN AIR COMPRESSOR(S) IS INCLUDED.

Enter the applicable reply code from the table below

(CJKKDB*;CJKKDC$DC*)

Table 1
	Reply Code (AA49)	Reply
	B	INCLUDED
	C	NOT INCLUDED

CJKS*DACCOMMODATED TOWED VEHICLE POWER SYSTEM

AN INDICATION OF THE POWER SYSTEM PROVIDED TO ACCOMMODATE A TOWED VEHICLE.

Enter the applicable reply code from the table below

(CJKSDDG*;CJKSDDH$$DDG*)

Table 1
	Reply Code (AG27)	Reply
	DG	AIR
	DH	ELECTRIC

CJKLDAUXILIARY GENERATOR

AN INDICATION OF WHETHER OR NOT AN AUXILIARY GENERATOR IS INCLUDED.

Enter the applicable reply code from the table below

(CJKLDB*;CJKLDC$DB*)

Table 1
	Reply Code (AA49)	Reply
	B	INCLUDED
	C	NOT INCLUDED

CJKMDDOZER ACCOMMODATED HYDRAULIC PUMP

AN INDICATION OF WHETHER OR NOT A DOZER ACCOMMODATED HYDRAULIC PUMP(S) IS INCLUDED.

Enter the applicable reply code from the table below

(CJKMDB*;CJKMDC$DB*)

Table 1
	Reply Code (AA49)	Reply
	B	INCLUDED
	C	NOT INCLUDED

AN INDICATION OF WHETHER OR NOT A WINCH IS INCLUDED.

Enter the applicable reply code from the table below

(BTRNDB*;BTRNDC$DB*)

Table 1
	Reply Code (AA49)	Reply
	B	INCLUDED
	C	NOT INCLUDED

A NUMERIC VALUE WHICH REPRESENTS A POSITIVE WHOLE VALUE WITHOUT REGARD TO ANY UNIT OF MEASURE.

Enter the numeric reply with a minimum of one digit.

AYQM*DMOUNTING LOCATION

INDICATES THE MOUNTING LOCATION FOR WHICH THE ITEM IS DESIGNED.

Enter the applicable reply code from the table below

Table 1
	Reply Code (AJ91)	Reply
	A	ANY ACCEPTABLE
	ABC	FRONT
	ABJ	REAR

ATYX*JCAPACITY RATING

THE RATED CAPACITY OF THE ITEM.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

Table 1
	Reply Code (AG67)	Reply
	AJ	KILOGRAMS
	AS	POUNDS

BKXM*ADRUM QUANTITY

THE NUMBER OF DRUMS PROVIDED.

Enter the numeric reply with a minimum of one digit.

CJKNBELECTRICAL SYSTEM VOLTAGE RATING

THE RATED VOLTAGE OF THE ELECTRICAL SYSTEM FOR WHICH THE ITEM IS DESIGNED.

Enter a reply with a minimum of one digit on either side of the decimal point.

CJKP*DTOWING ATTACHMENT LOCATION

INDICATES THE LOCATION OF THE TOWING ATTACHMENT(S) ON THE ITEM.

Enter the applicable reply code from the table below

(CJKPDABJ*;CJKPDABC$$DABC*)

Table 1
	Reply Code (AJ91)	Reply
	ABC	FRONT
	ABJ	REAR

FEAT*GSPECIAL FEATURES

THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.

Enter the reply in clear text. Separate multiple replies with a semicolon.

(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)

TEST*JTEST DATA DOCUMENT

THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.

Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.

(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)

Table 1
	Reply Code (AC28)	Reply
	A	SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
	B	STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
	C	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

SPCL*GSPECIAL TEST FEATURES

TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.

Enter the reply in clear text.

(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	Reply Code (AN62)	Reply
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	CS	CONSTRUCTION
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	FN	FINISH
	FM	FORM
	FA	FORMULA
	GR	GRADE
	GP	GROUP
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LT	LIMIT
	MK	MARK
	AA	MARKER
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	NR	NUMBER
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	QA	QUALITY
	RN	RANGE
	RT	RATING
	RF	REFERENCE NUMBER
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH

ZZZW*GDEPARTURE FROM CITED DOCUMENT

THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.

Enter the reply in clear text.

(ZZZWGAS MODIFIED BY MATERIAL*)

ZZZX*GDEPARTURE FROM CITED DESIGNATOR

THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.

Enter the reply in clear text.

(ZZZXGAS MODIFIED BY MATERIAL*)

ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS

A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.

Enter the reply in clear text.

(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)

Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.

CRTL*ACRITICALITY CODE JUSTIFICATION

THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.

Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.

(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)

If document availability code B, D, F, OR H, reply to MRC PRPY.

PRPY*APROPRIETARY CHARACTERISTICS

IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.

Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.

(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)

ELRN*GEXTRA LONG REFERENCE NUMBER

A REFERENCE NUMBER EXCEEDING 32 POSITIONS.

Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.

(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)

In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.

ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION

A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.

Enter the Reply Code from the table below.

Table 1
	Reply Code (AN58)	Reply
	A	ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD

ANTN*GSPECIFIC USE

THE REQUIRED PURPOSE OR APPLICATION FOR WHICH THE ITEM IS DESIGNED.

Enter clear text.

(ANTNGCLEARTEXT)

CBME*JCUBIC MEASURE

A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

Table 1
	Reply Code (AN76)	Reply
	CF	CUBIC FEET
	CM	CUBIC METERS

SUPP*GSUPPLEMENTARY FEATURES

CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.

Enter the reply in clear text.Separate multiple replies with a semicolon.

(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)

Reply to this MRC in accordance with Volume 3.

AGAV*GEND ITEM IDENTIFICATION

THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.

Enter the reply in clear text.

(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)

FCLS*AFUNCTIONAL CLASSIFICATION

THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.

Enter the alpha-numeric reply with a minimum of one character.

FTLD*GFUNCTIONAL DESCRIPTION

DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.

Enter the reply from the applicable document.

(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)

TMDN*ATYPE/MODEL DESIGNATION

THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.

Enter the alpha-numeric reply with a minimum of one character.

RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT

INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.

Enter concise statement for similar item including name and identifying data.

(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)

RDAL*GREFERENCE DATA AND LITERATURE

LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.

Enter data appropriate and in a concise manner to identify informational references covering the item.

(RDALGNAAVAIROIA/VFK58 A-2.2.9*)

NTRD*AENTRY DATE

INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.

Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.

(NTRDA80-05-28*)

This MRC replaced MRC ZZZP

The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.

PDNB*APURCHASE DESCRIPTION IDENTIFICATION

THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.

Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.

(ZZZPJ81A37-30624A*)

ZZZV*GFSC APPLICATION DATA

THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.

Enter the name of the next higher classifiable assembly in clear text.

(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)

CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY

THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.

Enter the reply in clear text.

(CXCYGLINE PROCESSOR CONTROL BOARD*)

CLQL*GCOLLOQUIAL NAME

A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.

Enter the reply in clear text.

(CLQLGWOVEN WIRE CLOTH*)