A partial structure or unit of a sectional building. These units consist of two types, namely, end units and center units.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED14219*)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLA43)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAA1406 | A1 | SHED ADDITION |
| AAA1415 | A10 | SCISSORS TRUSS |
| AAA1416 | A11 | 3-HINGE FRAME |
| AAA1417 | A12 | 2-HINGE FRAME |
| AAA1418 | A13 | BELGIAN CENTER COLUMN GABLE |
| AAA1419 | A14 | BELGIAN, 3 BAY GABLE, |
| AAA1420 | A15 | CENTER COLUMN TRUSS, SAWTOOTH |
| AAA1421 | A16 | GABLE TRUSS W/MONITOR |
| AAA1422 | A17 | FLAT TRUSS |
| AAA1423 | A18 | CAMBERED FINK GABLE |
| AAA1424 | A19 | PITCHED ROOF TRUSS W/CANTILEVER EXT |
| AAA1407 | A2 | SHED ADDITIONS |
| AAA1425 | A20 | LIGHT PITCH HIP TRUSS |
| AAA1426 | A21 | 4-WAY TOP WARREN TRUSS |
| AAA1427 | A22 | SHAWVER TRUSS |
| AAA1428 | A23 | GAMBREL TRUSS |
| AAA1429 | A24 | LANK TRUSS |
| AAA1430 | A25 | BOW STRING TRUSS |
| AAA1431 | A26 | BOW STRING CENTER COLUMN TRUSS |
| AAA1432 | A27 | BOW STRING W/MONITOR |
| AAA1433 | A28 | HINGELESS ARCH TRUSS |
| AAA1434 | A29 | BARREL TYPE ARCH |
| AAA1408 | A3 | SELF SUPPORTING SHED |
| AAA1435 | A30 | RAMPART ARCH |
| AAA1436 | A31 | ROUND ARCH |
| AAA1437 | A32 | MULTIPLE RAMPART ARCH |
| AAA1438 | A33 | ROUND ARCH WALL TYPE |
| AAA1439 | A34 | GOTHIC ARCH |
| AAA1440 | A35 | RAMPART ROUND, MULTIPLE COMBINATION |
| AAA1441 | A36 | EXTENDED SIDE BRACE FLAT TRUSS |
| AAA1442 | A37 | HIP TRUSS |
| AAA1443 | A38 | ROUND ROOF TRUSS |
| AAA1444 | A39 | TIMBER-FRAMED GIRDER BETWEEN TWO SUPPORTING POSTSPENT ROOF |
| AAA1409 | A4 | LIGHT PITCH ONE WAY SLOPE TRIANGULAR TRUSS |
| AAA1445 | A40 | GIRDER-FRAME SUPPORTED BY THREE TIMBER-FRAME POSTSPENT ROOF |
| AAA1446 | A41 | RIGID FRAME, LATTICE-WORK SADDLE ROOF |
| AAA1447 | A42 | RIGID FRAME, LATTICE-WORK SADDLE ROOF |
| AAA1448 | A43 | RIGID FRAME SADDLE ROOF |
| AAA1449 | A44 | INTERMEDIATE BUILDING |
| AAA1410 | A5 | TRIANGULAR TRUSS SAWTOOTH |
| AAA1411 | A6 | RIGID FRAME GABLE |
| AAA1412 | A7 | RIGID FRAME MULTI-UNIT GABLE |
| AAA1413 | A8 | RIGID FRAME SAWTOOTH |
| AAA1414 | A9 | BELGIAN TRUSS |
APQBDUNIT TYPE
INDICATES THE TYPE OF UNIT.
Enter the applicable reply code from the table below
(APQBDBHP*;APQBDBHN$$DBHP*)
| Table 1 |
| Reply Code (AK95) | Reply |
| BHN | CENTER |
| BHP | END |
AKGFJNOMINAL WIDTH
A NOMINAL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKGFJF2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| M | METERS |
AKGGJNOMINAL LENGTH
A NOMINAL MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKGGJF2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| M | METERS |
BXWSDENDWALL FRAMING MATERIAL
THE ELEMENT,COMPOUND,OR MIXTURE OF WHICH THE ENDWALL FRAME IS FABRICATED,EXCLUDING ANY SURFACE TREATMENT.
Enter the applicable reply code from the table below
(BXWSDDFAAK0*;BXWSDCC0000$DRCBBB0*;BXWSDCC0000$$DRCBBB0*)
| Table 1 |
| Reply Code (AD09) | Reply |
| ALC000 | ALUMINUM |
| AL0000 | ALUMINUM ALLOY |
| A | ANY ACCEPTABLE |
| AP0000 | ASPHALT |
| BN0000 | BRONZE |
| DFK000 | CANVAS |
| CX0000 | CEMENT |
| DFAAK0 | CLOTH, NYLON |
| CEG000 | COMPOUND, WAX, MICROCRYSTALLINE |
| CW0000 | CONCRETE |
| CFC000 | CORD, NYLON |
| CC0000 | COTTON |
| CCH000 | COTTON DUCK |
| DFCCCC | DUCK, NYLON |
| FA0000 | FABRIC |
| FAB000 | FABRIC, NYLON |
| FD0000 | FIBERBOARD |
| FG0000 | FIBERGLASS |
| GS0000 | GLASS |
| GSG000 | GLASS FABRIC |
| GSAF00 | GLASS, PLASTIC, LAMINATED |
| GSAM00 | GLASS, POLYESTER |
| WDAD00 | HARDBOARD |
| WDAE00 | HARDWOOD |
| ME0000 | METAL |
| PF0000 | PAPER |
| PC0000 | PLASTIC |
| PCCCCX | PLASTIC FOAM |
| PCAB00 | PLASTIC, POLYESTER |
| PCAAF0 | PLASTIC, POLYESTER RESIN, GLASS FIBER BASE |
| PCAJ00 | PLASTIC, POLYURETHANE |
| PCDDDE | PLASTIC, STYRENE |
| PW0000 | PLYWOOD |
| PL0000 | POLYAMIDE NYLON |
| WDAF00 | PULPBOARD |
| RL0000 | RAYON |
| DA0000 | RESIN |
| RC0000 | RUBBER |
| RC0037 | RUBBER, MIL-G-1086, TYPE 2 |
| RCBBB0 | RUBBER, NEOPRENE |
| RCAAF0 | RUBBER, POROUS |
| RCC000 | RUBBER, SYNTHETIC |
| SKB000 | SLATE |
| ST0000 | STEEL |
| STD000 | STEEL, STAINLESS |
| DFAAAM | VINYL |
| WD0000 | WOOD |
| WDK000 | WOOD, MAHOGANY |
| WDL000 | WOOD, OAK |
BNJDDINSULATION LOCATION
INDICATES THE LOCATION OF AN ITEM WHICH IS INSULATED.
Enter the applicable reply code from the table below
(BNJDDCBM*;BNJDDBKF$DADH*;BNJDDBKF$$DADH*)
| Table 1 |
| Reply Code (AJ91) | Reply |
| ADH | END WALL |
| BMD | FLOOR |
| CBL | INSULATED COMPLETELY |
| BQJ | ROOF |
| CBM | UNINSULATED |
| BKF | WALL |
BXXFAROOM QUANTITY
THE NUMBER OF ROOMS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BXXFA10*)
BXDB*JCENTER INSIDE CLEARANCE HEIGHT
A MEASUREMENT FROM FLOOR LEVEL TO CENTER CLEARANCE OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BXDBJFC2.0*;BXDBJFC2.0$$JFC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| M | METERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BXDK*JSIDEWALL INSIDE CLEARANCE HEIGHT
A MEASUREMENT FROM THE FLOOR LEVEL TO THE TOP OF THE SIDEWALL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BXDKJFC2.0*;BXDKJFC2.0$$JFC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| M | METERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC BXDJ, YOU MUST ANSWER MRC (APCA and BLZF)
BXDJDPARTIALLY PANELED FEATURE
AN INDICATION OF WHETHER OR NOT A PARTIALLY PANELED FEATURE IS INCLUDED.
Enter the applicable reply code from the table below
(BXDJDB*;BXDJDC$DC*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
APCA*APANEL QUANTITY
THE NUMBER OF PANELS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(APCAA10*)
BLZF*DPANEL LOCATION
INDICATES THE LOCATION OF THE PANEL(S) ON THE ITEM.
Enter the applicable reply code from the table below
(BLZFDADH*;BLZFDBQJ$DADJ*)
| Table 1 |
| Reply Code (AJ91) | Reply |
| ADH | END WALL |
| BQJ | ROOF |
| ADJ | SIDE WALL |
IF YOU ANSWER MRC BXXG, YOU MUST ANSWER MRC (BPQL)
BXXG*ADOOR OPENING QUANTITY
THE NUMBER OF DOOR OPENINGS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BXXGA10*)
BPQL*DDOOR OPENING LOCATION
INDICATES THE LOCATION OF THE DOOR OPENING.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(BPQL3HIZDADH*;BPQL3HIZDADH$DADJ*;BPQL3HIZDADH$$DADJ*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HIY | FIRST DOOR |
| 3HIZ | SECOND DOOR |
| 3HJC | SINGLE DOOR |
| 3HJD | ALL DOORS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AJ91) | Reply |
| ADH | END WALL |
| ADJ | SIDE WALL |
BXXN*AWINDOW OPENING QUANTITY
THE NUMBER OF WINDOW OPENINGS PROVIDED.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(BXXN3AEEA10)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HIY | FIRST DOOR |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
ATSY*AWINDOW QUANTITY
THE NUMBER OF WINDOWS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(ATSYA10*)
BXXT*ASHUTTER QUANTITY
THE NUMBER OF SHUTTERS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BXXTA10*)
BXXW*ASCREEN QUANTITY
THE NUMBER OF SCREENS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BXXWA10*)
BXXX*ALOUVER OPENING QUANTITY
THE NUMBER OF LOUVER OPENINGS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BXXXA10*)
BXXY*ALOUVER QUANTITY
THE NUMBER OF LOUVERS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BXXYA10*)
BXXZ*AVENTILATOR OPENING QUANTITY
THE NUMBER OF VENTILATOR OPENINGS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BXXZA10*)
BXYB*AVENTILATOR QUANTITY
THE NUMBER OF VENTILATORS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BXYBA10*)
BXYC*ASTACK OPENING QUANTITY
THE NUMBER OF STACK OPENINGS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BXYCA10*)
ASCZ*ASTACK QUANTITY
THE NUMBER OF STACKS IN THE ITEM.
Enter the numeric reply with a minimum of one digit.
(ASCZA10*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CCNF*GAPPLICATION/FUNCTION
THE APPLICATION AND/OR FUNCTION FOR WHICH THE ITEM IS DESIGNED.
Enter clear text.
(CCNFGCLEARTEXT)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAB5)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAU0)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.
(NTRDA80-05-28*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AEEDPCP000*;MATT3AEEDPCP000$DPCP000*;MATT3AEEDPCP000$$DPCP000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BGC | INSIDE ENDWALL |
| 3BGD | OUTSIDE ENDWALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information