A self-contained refrigeration unit having a power driven compressor, condenser, evaporator, and other necessary components. It is used to refrigerate an enclosed space by the introduction of the evaporator section through an opening in the side or top of the enclosure forming an integral section thereof (panel type) or placed in the outside proximity of the inclosure (remote type). Excludes:REFRIGERATOR-FREEZER, MECHANICAL, FOOD; and REFRIGERATOR, MECHANICAL, FOOD.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED13501*)
APQBDUNIT TYPE
INDICATES THE TYPE OF UNIT.
Enter the applicable reply code from the table below
(APQBDADZ*;APQBDAEA$DAEA*)
| Table 1 |
| Reply Code (AK95) | Reply |
| ADZ | PANEL |
| AEA | REMOTE |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCM2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CM | CUBIC METERS |
AZDP*DUNIT INSERTION LOCATION
INDICATES THE LOCATION IN THE ITEM WHERE THE UNIT IS INSERTED.
Enter the applicable reply code from the table below
(AZDPDAKF*;AZDPDABD$DAKF*)
| Table 1 |
| Reply Code (AJ91) | Reply |
| AKF | SIDE |
| ABD | TOP |
BBLL*JINSERT PLUG SEALING SURFACE WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE SEALING SURFACE OF THE INSERT PLUG,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BBLLJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
BBLM*JINSERT PLUG SEALING SURFACE HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF THE SEALING SURFACE OF AN INSERT PLUG,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BBLMJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AZDY*DPANEL UNIT SKID MOUNTING FEATURE
AN INDICATION OF WHETHER OR NOT A PANEL UNIT SKID MOUNTING FEATURE IS INCLUDED.
Enter the applicable reply code from the table below
(AZDYDB)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
AZDW*DREMOTE UNIT MOUNTING METHOD
THE MEANS OF ATTACHING THE REMOTE UNIT.
Enter the applicable reply code from the table below
(AZDWDBEA*;AZDWDAEJ$DAEH*)
| Table 1 |
| Reply Code (AM39) | Reply |
| AEH | CEILING SUSPENSION |
| BEA | PORTABLE |
| AEJ | WALL BRACKET |
AZDZ*DCONDENSER UNIT SKID MOUNTING FEATURE
AN INDICATION OF WHETHER OR NOT A CONDENSING UNIT SKID MOUNTING FEATURE IS INCLUDED.
Enter the applicable reply code from the table below
(AZDZDB)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
IF STYLE/REPLY CODE(s) AEB WERE ENTERED FOR MRC AZEA, YOU MUST ANSWER MRC (AZEL)
AZEADEVAPORATOR UNIT TYPE
INDICATES THE TYPE OF EVAPORATOR UNIT.
Enter the applicable reply code from the table below
(AZEADAEB*;AZEADAEC$DAEB*)
| Table 1 |
| Reply Code (AK95) | Reply |
| AEB | FORCED AIR-COOLING |
| AEC | GRAVITY CONVECTION |
IF STYLE/REPLY CODE(s) EQ WERE ENTERED FOR MRC AZEL, YOU MUST ANSWER MRC (AZEM and ACDC and ELEC and ACZB and FAAZ)
AZEL*DEVAPORATOR FAN DRIVE TYPE
INDICATES THE TYPE OF DRIVE USED FOR THE EVAPORATOR FAN.
Enter the applicable reply code from the table below
(AZELDEQ*;AZELDER$DER*)
| Table 1 |
| Reply Code (AG25) | Reply |
| ER | CONDENSING UNIT PRIME MOVER |
| EQ | INDIVIDUAL ELECTRIC MOTOR |
AZEM*BEVAPORATOR FAN MOTOR HORSEPOWER RATING
THE RATED HORSEPOWER OF THE EVAPORATOR FAN MOTOR.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AZEMB2.0)
ACDC*DCURRENT TYPE
INDICATES THE TYPE OF CURRENT WHETHER ALTERNATING,DIRECT,OR BOTH.
Enter the applicable reply code from the table below
(ACDCDD*;ACDCDC$DB*)
| Table 1 |
| Reply Code (AB62) | Reply |
| B | AC |
| D | AC/DC |
| C | DC |
ELEC*BVOLTAGE IN VOLTS
THE TOTAL ELECTRICAL VOLTAGE.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ELECB2.0)
ACZB*JFREQUENCY RATING
THE NUMBER OF COMPLETE CYCLIC CHANGES,PER UNIT OF TIME,FOR WHICH AN ITEM IS RATED.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACZBJEB2.0*;ACZBJEB2.0$$JEB2.1*)
| Table 1 |
| Reply Code (AC32) | Reply |
| E | HERTZ |
| K | KILOHERTZ |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
FAAZ*DPHASE
THE NUMBER OF ALTERNATING CURRENT PHASES.
Enter the applicable reply code from the table below
(FAAZDB*;FAAZDA$DE*)
| Table 1 |
| Reply Code (AD02) | Reply |
| A | SINGLE |
| E | SINGLE/THREE |
| C | THREE |
| B | TWO |
AZJY*DDEFROST SYSTEM TYPE
INDICATES THE TYPE OF DEFROST SYSTEM FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(AZJYDSM*;AZJYDSL$DSL*)
| Table 1 |
| Reply Code (AB75) | Reply |
| SL | ELECTRIC |
| SM | HOT GAS |
AQZF*DCONTROL TYPE
INDICATES THE TYPE OF CONTROL.
Enter the applicable reply code from the table below
(AQZFDAAB*;AQZFDABT$DABT*)
| Table 1 |
| Reply Code (AL37) | Reply |
| AAB | AUTOMATIC |
| ABT | MANUAL |
AWLPDCONDENSER TYPE
INDICATES THE TYPE OF CONDENSER.
Enter the applicable reply code from the table below
(AWLPDAM*;AWLPDAJ$DAH*)
| Table 1 |
| Reply Code (AM41) | Reply |
| AH | HERMETICALLY SEALED |
| AJ | OPEN |
| AM | SEMIHERMETICALLY SEALED |
IF STYLE/REPLY CODE(s) DF WERE ENTERED FOR MRC AZAD, YOU MUST ANSWER MRC (AWCD)
IF STYLE/REPLY CODE(s) AB WERE ENTERED FOR MRC AZAD, YOU MUST ANSWER MRC (AWMB)
AZADDCONDENSER COOLING TYPE
INDICATES THE TYPE OF COOLING FOR WHICH THE CONDENSER IS DESIGNED.
Enter the applicable reply code from the table below
(AZADDAB*;AZADDDF$DAB*)
| Table 1 |
| Reply Code (AB75) | Reply |
| AB | AIR |
| DF | WATER |
AWCD*DWATER FOR WHICH DESIGNED
THE TYPE OF WATER WITH WHICH THE ITEM IS DESIGNED TO BE USED.
Enter the applicable reply code from the table below
(AWCDDKS*;AWCDDKR$DKS*)
| Table 1 |
| Reply Code (AB75) | Reply |
| KR | FRESH |
| KS | SALT |
IF STYLE/REPLY CODE(s) EQ WERE ENTERED FOR MRC AWMB, YOU MUST ANSWER MRC (AZAC and AZKB and AZKC and AZKE and AZKF)
AWMB*DFAN DRIVE TYPE
INDICATES THE TYPE OF DRIVE PROVIDED FOR THE FAN.
Enter the applicable reply code from the table below
(AWMBDES*;AWMBDEQ$DES*)
| Table 1 |
| Reply Code (AG25) | Reply |
| ES | COMPRESSOR UNIT PRIME MOVER |
| EQ | INDIVIDUAL ELECTRIC MOTOR |
AZAC*BFAN MOTOR HORSEPOWER RATING
THE RATED HORSEPOWER OF THE FAN MOTOR.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AZACB2.0)
AZKB*DFAN MOTOR CURRENT TYPE
INDICATES THE TYPE OF CURRENT REQUIRED TO OPERATE THE FAN MOTOR.
Enter the applicable reply code from the table below
(AZKBDD*;AZKBDC$DB*)
| Table 1 |
| Reply Code (AB62) | Reply |
| B | AC |
| D | AC/DC |
| C | DC |
AZKC*BFAN MOTOR VOLTAGE IN VOLTS
THE TOTAL ELECTRICAL VOLTAGE OF THE FAN MOTOR,EXPRESSED IN VOLTS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AZKCB2.0)
AZKE*JFAN MOTOR FREQUENCY RATING
THE NUMBER OF COMPLETE CYCLIC CHANGES,PER UNIT OF TIME,FOR WHICH THE FAN MOTOR IS RATED.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AZKEJEB2.0*;AZKEJEB2.0$$JEB2.1*)
| Table 1 |
| Reply Code (AC32) | Reply |
| E | HERTZ |
| K | KILOHERTZ |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AZKF*DFAN MOTOR PHASE
THE NUMBER OF ALTERNATING CURRENT PHASES OF THE FAN MOTOR.
Enter the applicable reply code from the table below
(AZKFDC*;AZKFDA$DB*)
| Table 1 |
| Reply Code (AD02) | Reply |
| A | SINGLE |
| E | SINGLE/THREE |
| C | THREE |
| B | TWO |
ARNADCOOLANT TYPE
INDICATES THE TYPE OF COOLANT USED WITH THE ITEM.
Enter the applicable reply code from the table below
(ARNADAV*;ARNADAS$DBD*)
| Table 1 |
| Reply Code (AL57) | Reply |
| BH | AMMONIA, TECHNICAL |
| A | ANY ACCEPTABLE |
| BD | CARBON DIOXIDE |
| BJ | CARBON DIOXIDE, TECHNICAL |
| BM | CARRENE-500 |
| BF | FLUORINATED HYDROCARBON |
| AD | FREON-11 |
| AM | FREON-113 |
| AN | FREON-114 |
| AP | FREON-114B2 |
| AQ | FREON-115 |
| AR | FREON-116 |
| AE | FREON-12 |
| AF | FREON-13 |
| AG | FREON-13B1 |
| AH | FREON-14 |
| AS | FREON-142 |
| AJ | FREON-21 |
| AK | FREON-22 |
| AL | FREON-23 |
| BN | FREON-500 |
| AW | FREON-502 |
| AT | FREON-C-318 |
| AV | FREON-R134A |
| AZ | GENETRON-115 |
| BA | GENETRON-142B |
| BB | GENETRON-152A |
| AX | GENETRON-21 |
| AY | GENETRON-23 |
| AA | HFC-134A |
| BC | KULENE-131 |
| BE | METHYL CHLORIDE |
| BG | METHYL CHLORIDE, TECHNICAL |
| AC | WATER |
IF STYLE/REPLY CODE(s) EF WERE ENTERED FOR MRC AZKH, YOU MUST ANSWER MRC (AZKP)
IF STYLE/REPLY CODE(s) EE WERE ENTERED FOR MRC AZKH, YOU MUST ANSWER MRC (ANCY and AZKJ and AZKK and AZKL and AZKM)
AZKHDCOMPRESSOR DRIVE TYPE
INDICATES THE TYPE OF DRIVE FOR WHICH THE COMPRESSOR IS DESIGNED.
Enter the applicable reply code from the table below
(AZKHDEE*;AZKHDEF$DEF*)
| Table 1 |
| Reply Code (AG25) | Reply |
| EE | ELECTRIC MOTOR |
| EF | GASOLINE ENGINE |
AZKP*BBRAKE HORSEPOWER RATING
THE BRAKE HORSEPOWER FOR WHICH THE ITEM IS RATED.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AZKPB2.0)
ANCY*BHORSEPOWER RATING
AN INDICATION OF THE RATED HORSEPOWER OF THE ITEM.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ANCYB2.0)
AZKJ*DMOTOR CURRENT TYPE
INDICATES THE TYPE OF CURRENT REQUIRED TO OPERATE THE MOTOR.
Enter the applicable reply code from the table below
(AZKJDC*;AZKJDD$DB*)
| Table 1 |
| Reply Code (AB62) | Reply |
| B | AC |
| D | AC/DC |
| C | DC |
AZKK*BMOTOR VOLTAGE IN VOLTS
THE TOTAL ELECTRICAL VOLTAGE OF THE MOTOR,EXPRESSED IN VOLTS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AZKKB2.0)
AZKL*JMOTOR FREQUENCY RATING
THE NUMBER OF COMPLETE CYCLIC CHANGES,PER UNIT OF TIME,FOR WHICH THE MOTOR IS RATED.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AZKLJKC2.0*;AZKLJKC2.0$$JKC2.1*)
| Table 1 |
| Reply Code (AC32) | Reply |
| E | HERTZ |
| K | KILOHERTZ |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AZKM*DMOTOR PHASE
THE NUMBER OF ALTERNATING CURRENT PHASES OF THE MOTOR.
Enter the applicable reply code from the table below
(AZKMDE*;AZKMDB$DA*)
| Table 1 |
| Reply Code (AD02) | Reply |
| A | SINGLE |
| E | SINGLE/THREE |
| C | THREE |
| B | TWO |
AGUBBREFRIGERATION CAPACITY IN BTU PER HOUR
THE CAPACITY OF THE ITEM AS RATED BY INDUSTRY,EXPRESSED IN BRITISH THERMAL UNITS /BTU/ OF REFRIGERATION PER HOUR.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AGUBB2.0)
AXWT*JSTORAGE CAPACITY
THE STORAGE CAPACITY OF THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AXWTJCY2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| CY | CUBIC FEET |
| DC | GALLONS PER HOUR |
AZKQ*JTEMP RATING
A VALUE WHICH EXPRESSES THE DEGREE OF HEAT OR COLD AS APPLIED TO THE OPERATION,OR LIMITATION OF OPERATION,OF AN ITEM.
Enter the applicable Reply Code from Tables 1 and 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit as in the first and second examples. For negative temperature values, precede the numeric portion of the reply with the letter “M” as in the third and fourth examples.
(AZKQJFA68.0*; AZKQJCB0.0$$JCC35.0*; AZKQJFCM15.0*; AZKQJFBM40.0$$JFC75.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AZKR*BAMBIENT TEMP RATING IN DEG FAHRENHEIT
THE TEMPERATURE OF THE MEDIUM SURROUNDING AN ITEM AT WHICH IT CAN BE OPERATED,EXPRESSED IN DEGREES FAHRENHEIT.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AZKRB2.0)
AZKTDRADIO INTERFERENCE SUPPRESSION
AN INDICATION OF WHETHER OR NOT RADIO INTERFERENCE SUPPRESSION IS INCLUDED. IF INCLUDED PLEASE USE MRC ABFF IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable reply code from the table below
(AZKTDC)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
AZKW*GRADIO INTERFERENCE SUPPRESSION SPEC/STD
THE SPECIFICATION AND/OR STANDARD USED TO CONTROL THE NATURE AND DEGREE OF RADIO INTERFERENCE SUPPRESSION.
Enter clear text.
(AZKWGCLEARTEXT)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDG6*;ENACDXX$$DGC*)
| Table 1 |
| Reply Code (EN02) | Reply |
| G6 | ENERGY EFFICIENT - FEMP - APPLIANCES - FREEZERS |
| FJ | ENERGY EFFICIENT - FEMP - APPLIANCES - REFRIGERATORS |
| JR | ENERGY EFFICIENT - FEMP - FOOD SERVICE EQUIPMENT - REFRIGERATORS AND FREEZERS |
| GC | ICE MACHINES, AIR-COOLED - ENERGY STAR-COMMERCIAL FOOD SERVICE EQUIPMENT - ENERGY EFFICIENT PRODUCTS |
| XX | REVIEWED - DOES NOT MEET SOME ENAC CRITERIA |
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAA6)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAA0)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.
(NTRDA80-05-28*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(ZZZPJ81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ068*;HZRDDHAZ070$$DHAZ076*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ010 | CARBON DIOXIDE |
| HAZ031 | METHYL CHLORIDE |
| HAZ070 | REFRIGERANT GAS, R 114 |
| HAZ066 | REFRIGERANT GAS, R 115 |
| HAZ078 | REFRIGERANT GAS, R 116 |
| HAZ072 | REFRIGERANT GAS, R 12 |
| HAZ068 | REFRIGERANT GAS, R 13 |
| HAZ082 | REFRIGERANT GAS, R 14 |
| HAZ076 | REFRIGERANT GAS, R 21 |
| HAZ062 | REFRIGERANT GAS, R 22 |
| HAZ074 | REFRIGERANT GAS, R 500 |
| HAZ064 | REFRIGERANT GAS, R 502 |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information