An item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

FSC Information

5340	Hardware, Commercial
5342	Hardware, Weapon System

Colloquial Information

G8173	ZINC DISK
K6139	ANODE CASTING
G8169	ZINC ROD
K5011	DRIVESHAFT HOUSING ANODE
K4067	SHAFT COLLAR ANODE
H9322	SECTIONAL ROD
K4999	ANODE ROD
G8176	ZINC BLOCK
J1669	ELECTROLYSIS ELIMINATOR
H6649	MAGNESIUM ROD
J1668	ELECTROLYSIS COLLAR
K4777	SACRIFICAL ANODE
K5319	ANNODE ASSEMBLY,ROPE GUARD
G8170	ZINC PLATE
G8171	ZINC PENCIL

Change List

MRC PDNB has been added

MRC ZZZP has been deleted

NAMEDITEM NAME

NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.

Enter the item name code.

(NAMED13154*)

MATTDMATERIAL

THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.

Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2

(MATT3ACNDCU0195*;MATT3ACNDCU0195$DSTA000*;MATT3ACNDCU0195$$DSTA000*)

Table 1
	ISAC Field Indicator (5000)	Location
	3ACN	CORE
	3AEE	OVERALL
	3HOU	LOCATION NOT OTHERWISE SPECIFIED
	3IBG	ANODE

Table 2
	Reply Code (MA01)	Reply
	ALA000	ALUMINUM
	ALB000	ALUMINUM ALLOY
	PLA000	ARC RESISTANT PLASTIC
	CDA000	CADMIUM
	CNB000	CARBON GRAPHITE
	CUA000	COPPER
	CUB000	COPPER ALLOY
	CU0100	COPPER ALLOY 482
	CU0103	COPPER ALLOY 510
	CU0195	COPPER ALLOY 903
	CU1155	COPPER ALLOY UNS C98600
	FEA000	IRON
	FEB000	IRON CAST
	MGA000	MAGNESIUM
	MGB000	MAGNESIUM ALLOY
	MG0001	MAGNESIUM ALLOY AZ31B
	NLA000	NICKEL
	NLB000	NICKEL ALLOY
	NL0017	NICKEL ALLOY R-405
	PTA000	PLATINUM
	AGA000	SILVER
	STA000	STEEL
	STB000	STEEL CORROSION RESISTING
	ST0552	STEEL UNS K02600
	SNB000	TIN
	TTB000	TITANIUM
	ZNB000	ZINC
	ZNA000	ZINC ALLOY

SFTT*DSURFACE TREATMENT

THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.

Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2

(SFTT3AEEDZNA000*;SFTT3AEEDZNA000$DCMA000*;SFTT3AEEDZNA000$$DCMA000*)

Table 1
	ISAC Field Indicator (5000)	Location
	3ACN	CORE
	3AEE	OVERALL
	3HOU	LOCATION NOT OTHERWISE SPECIFIED

Table 2
	Reply Code (SF01)	Reply
	CDA000	CADMIUM
	CMA000	CHROMATE
	SNA000	TIN
	ZNA000	ZINC

ASDB*JWIDTH ACROSS FLATS

THE SHORTEST STRAIGHT LINE BETWEEN FLATS,PERPENDICULAR TO THE HEIGHT.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ASDBJLC2.0*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

IF STYLE/REPLY CODE(s) NC, NE, NF, NJ, NS, JC, JE OR JF WERE ENTERED FOR MRC THDS, YOU MUST ANSWER MRC (AAJD and AAJF and AKMG) or (AAJE and AAJF and AKMG)

IF STYLE/REPLY CODE(s) NM WERE ENTERED FOR MRC THDS, YOU MUST ANSWER MRC (AAJE) or (AAJF) or (AKMG)

IF STYLE/REPLY CODE(s) NP, NT OR PT WERE ENTERED FOR MRC THDS, YOU MUST ANSWER MRC (AAJF)

IF STYLE/REPLY CODE(s) SM OR SS WERE ENTERED FOR MRC THDS, YOU MUST ANSWER MRC (AAJF) or (AKMG)

THDS*JTHREAD SIZE AND SERIES/TYPE DESIGNATOR

DESIGNATES THE THREAD DIAMETER,SERIES/TYPE,AND NUMBER OF THREADS PER SPECIFIC MEASUREMENT SCALE.

Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.

(THDSJNM2.0*;THDSJNM2.0$$JNM2.1*)

Table 1
	Reply Code (AH06)	Reply
	SM	ISO M
	SS	ISO S
	NP	NPT
	NT	NPTF
	PT	PTF-SAE SHORT
	UN	UN
	NC	UNC
	NE	UNEF
	NF	UNF
	NJ	UNJ
	JC	UNJC
	JE	UNJEF
	JF	UNJF
	NM	UNM
	NS	UNS

AAJD*ATHREAD CLASS

A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.

Enter the alpha-numeric reply with a minimum of one character.

(AAJDAM3)

AAJE*JTHREAD PITCH DIAMETERS

THE MINIMUM AND MAXIMUM PITCH DIAMETER LIMITS OF A STRAIGHT SCREW THREAD.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.

(AAJEJAM32.0/P50.0*;AAJEJAM32.0/P50.0$$JA*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

AAJF*DTHREAD DIRECTION

THE DIRECTION OF THE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.

Enter the applicable reply code from the table below

(AAJFDL*;AAJFDR$$DR*)

Table 1
	Reply Code (AA38)	Reply
	L	LEFT-HAND
	R	RIGHT-HAND

AKMG*JNOMINAL THREAD LENGTH

A NOMINAL MEASUREMENT OF THE EXTENT OF THREADS,INCLUDING INCOMPLETE THREADS,ALONG A LINE PARALLEL TO THE LONGITUDINAL AXIS.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AKMGJA2.0*;AKMGJA2.0$$JA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

AARNDFABRICATION METHOD

THE PROCESS USED IN MANUFACTURING THE ITEM.

Enter the applicable reply code from the table below

(AARNDAJ*;AARNDDP$DAN*;AARNDDP$$DAN*)

Table 1
	Reply Code (AA62)	Reply
	AN	CAST
	AJ	FORGED
	DP	ROLLED PLATE

IF STYLE/REPLY CODE(s) 10, 33 OR 34 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AKMH and AKMJ and ABKV and ABRY)

IF STYLE/REPLY CODE(s) 11 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABGL and ABGG and AKMH and ABNM and ABRY and AKMJ)

IF STYLE/REPLY CODE(s) 12, 32 OR 35 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABNM and ABGL and AKMH and ABRY and AKMJ)

IF STYLE/REPLY CODE(s) 13 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AKMM and AKMP and ABRF and AKML and AKMJ and ABRY and ABGL and AKMK and ABNM)

IF STYLE/REPLY CODE(s) 14 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AKMP and AKML and AKMJ and ABRY and ABNM and AKMK and AKMM and ABGL)

IF STYLE/REPLY CODE(s) 15 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AKMJ and ABRF and AKMK and AKMP and ABRY and AKML and ABNM and ABGL and AKMM)

IF STYLE/REPLY CODE(s) 16 OR 17 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABRY and AKMK and AKMJ and ABNM and AKML and ABGL)

IF STYLE/REPLY CODE(s) 18 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABRY and ABNM and ABGL and AKMJ and AKMK and AKMR and AKMM and AKMQ and AKMS and AKML and ABGG)

IF STYLE/REPLY CODE(s) 19 OR 20 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADWK and ADVR and ABNM and ABGL and AKMJ and AKMK and AKMR and AKMM and AKMQ and AKMS and AKML and ABGG)

IF STYLE/REPLY CODE(s) 21 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAUB and ABRY and ABGG and ABNM and ABGL and AKMK and AKMM and AKML and AKMS and AKMR and AKMQ)

IF STYLE/REPLY CODE(s) 22 OR 23 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADWK and ADVR and ABGG and ABNM and ABGL and AKMK and AKMM and AKML and AKMS and AKMR and AKMQ)

IF STYLE/REPLY CODE(s) 24 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABNM and AKML and AKMJ and AKMK and ABRY and ABGL)

IF STYLE/REPLY CODE(s) 25 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABRY and ABKV)

IF STYLE/REPLY CODE(s) 26 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AKMH and ABKV and AKMJ and ABNM)

IF STYLE/REPLY CODE(s) 27 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABRY and ABGL and AKMH and ABNM and AKMQ and AKMR and AKMS and AKMJ)

IF STYLE/REPLY CODE(s) 28 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AKMJ and ABRY and ABGL and AKMH and ABNM)

IF STYLE/REPLY CODE(s) 29 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AKMH and ABKV and AKMJ and ABNM)

IF STYLE/REPLY CODE(s) 30 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AKMP and ABRF and ABGG and ABKV and AKMJ and AKMH and AJHM and ABNM)

IF STYLE/REPLY CODE(s) 31 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABRY and AKMQ and AKMR and AKMS and AKMT and AKMJ and AKML and ABGL and AKMM and AKMK and ABNM)

IF STYLE/REPLY CODE(s) 36 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABNM and ABKV and AKMJ)

IF STYLE/REPLY CODE(s) 37 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABRY and ABKV and AKMJ)

IF STYLE/REPLY CODE(s) 38 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABRY and AKMQ and ABRF and AKMK and AKMP and AKMJ and AKMM and ABGL and AKML and AAUB and ABNM)

IF STYLE/REPLY CODE(s) 39 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAUB and ABRY)

IF STYLE/REPLY CODE(s) 40 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAUB and ABRY and ABKV)

IF STYLE/REPLY CODE(s) 41 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKV)

IF STYLE/REPLY CODE(s) 42 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABGL and ABRY)

IF STYLE/REPLY CODE(s) 43 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AKMK and AKMJ and ABKV and AKML and ABNM)

IF STYLE/REPLY CODE(s) 44 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKV)

STYLLSTYLE DESIGNATOR

THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.

Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.

(STYLL28)

Table 1
Physical Drawing ID	Reply Code (STYL)	Reply
AAD1243	10	ROUND SECTION WITH PIPE CORE
AAD1244	11	D SECTION WITH PIPE CORE
AAD1245	12	SQUARE SECTION WITH PIPE CORE
AAD1246	13	TANKER TYPE WITH STRAP CORE
AAD1247	14	TANKER TYPE WITH STRAP CORE
AAD1248	15	TANKER TYPE WITH STRAP CORE
AAD1249	16	HULL SLAB WITH STRAP CORE
AAD1250	17	SLAB TYPE WITH STRAP CORE
AAD1251	18	HULL TYPE STRAP CORE, SQUARE ENDS
AAD1252	19	HULL TYPE STRAP CORE, SINGLE BEVEL
AAD1253	20	HULL TYPE STRAP CORE, DOUBLE BEVEL
AAD1254	21	HULL TYPE STRAP CORE, SQUARE ENDS
AAD1255	22	HULL TYPE STRAP CORE, SINGLE BEVEL
AAD1256	23	HULL TYPE STRAP CORE, DOUBLE BEVEL
AAD1257	24	TEARDROP TYPE WITH STRAP CORE
AAD1258	25	ROD TYPE NO CORE
AAD1259	26	HEAT EXCHANGER SLAB PIPE CORE
AAD1260	27	HULL SLAB WITH PIPE CORE
AAD1261	28	SQUARE WITH PIPE CORE
AAD1262	29	ROUND WITH PIPE CORE
AAD1263	30	SEMI-CIRCULAR WITH PIPE
AAD1264	31	TANKER TYPE WITH CHANNEL CORE
AAD1265	32	OUTRIGGER TYPE WITH EYE BOLT CORE
AAD1266	33	OUTRIGGER TYPE WITH EYE BOLT CORE
AAD1267	34	ROD TYPE WITH WIRE CORE
AAD1268	35	STRIP TYPE WIRE CORE
AAD1269	36	SEGMENTED DISC-MACHINE FORMED INTERLOCKING CORE
AAD1270	37	ROD IMPREGNATED
AAD1271	38	HULL SLAB STRAP CORE
DQ00704	39	COLLAR
DQ00705	40	COLLAR
DQ00706	41	CLAMP
DQ00707	42	MOUNT
DQ01037	43	ROUND W/STRAP CORE
DQ01117	44	ELLIPTICAL

AAUB*JHOLE DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A HOLE,AND TERMINATES AT THE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AAUBJAB2.0*;AAUBJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABGG*JRADIUS

THE DISTANCE FROM THE CENTERLINE TO THE AXIS OF THE ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABGGJAA2.0*;ABGGJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABGL*JWIDTH

A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABGLJAB2.0*;ABGLJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABKV*JOUTSIDE DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABKVJAC2.0*;ABKVJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABNM*JTHICKNESS

A MEASUREMENT OF THE SMALLEST DIMENSION OF AN ITEM,IN DISTINCTION FROM LENGTH OR WIDTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABNMJAB2.0*;ABNMJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABRF*JCENTER TO CENTER DISTANCE BETWEEN HOLES

THE CENTER TO CENTER DISTANCE BETWEEN HOLES ON THE ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABRFJAB2.0*;ABRFJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABRY*JLENGTH

A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABRYJAC2.0*;ABRYJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADWK*JMINOR HEIGHT

A MINOR MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN OBJECT,IN DISTINCTION FROM DEPTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADWKJAA2.0*;ADWKJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AJHM*JHOLE CENTER TO BASE DISTANCE

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AJHMJAA2.0*;AJHMJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AKMH*JCORE DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE CORE,AND TERMINATES AT THE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AKMHJAC2.0*;AKMHJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AKMJ*JCORE LENGTH

A MEASUREMENT OF THE LONGEST DIMENSION OF THE CORE,IN DISTINCTION FROM WIDTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AKMJJAB2.0*;AKMJJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AKMK*JCORE WIDTH

A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE CORE,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AKMKJAC2.0*;AKMKJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AKML*JCORE THICKNESS

A MEASUREMENT OF THE SMALLEST DIMENSION OF THE CORE,IN DISTINCTION FROM LENGTH OR WIDTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AKMLJAC2.0*;AKMLJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AKMM*JCORE HOLE DIAMETER

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AKMMJAB2.0*;AKMMJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AKMP*JDISTANCE FROM EDGE TO CENTER OF CORE HOLE

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AKMPJAA2.0*;AKMPJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AKMQ*JDISTANCE FROM EDGE TO CENTER OF FIRST HOLE

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AKMQJAC2.0*;AKMQJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AKMR*JDISTANCE FROM EDGE TO CENTER OF SECOND HOLE

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AKMRJAC2.0*;AKMRJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AKMS*JDISTANCE FROM EDGE TO CENTER OF THIRD HOLE

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AKMSJAA2.0*;AKMSJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AKMT*JDISTANCE FROM EDGE TO CENTER OF FOURTH HOLE

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AKMTJAA2.0*;AKMTJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADVR*BANGLE IN DEG

THE ANGLE FORMED BY THE ANGULAR PORTION OF THE ITEM,EXPRESSED IN DEGREES. PLEASE USE MRC CSXS IN PLACE OF THIS DISCONTINUED MRC.

Enter a reply with a minimum of one digit on either side of the decimal point.

(ADVRB2.0)

ADJH*DMOUNTING METHOD

THE MEANS OF ATTACHING THE ITEM. PLEASE USE MRC AXGY IN PLACE OF THIS DISCONTINUED MRC.

Enter the applicable reply code from the table below

(ADJHDTA*;ADJHDHB$DSZ*;ADJHDHB$$DSZ*)

Table 1
	Reply Code (AB89)	Reply
	AA	BOLT
	HC	CABLE
	TA	CHANNEL
	TB	EYEBOLT
	GY	HOLES
	AK	HOOK
	DT	PIPE
	HA	STRAPS
	GZ	THREADED END
	HB	THREADED PLUG
	SZ	WIRE

ABTJ*AMOUNTING HOLE QUANTITY

THE NUMBER OF MOUNTING HOLES PROVIDED.

Enter the numeric reply with a minimum of one digit.

(ABTJA10*)

ADZM*AINSERT QUANTITY

THE NUMBER OF INSERTS/INTERLINERS CONTAINED IN THE ITEM.

Enter the numeric reply with a minimum of one digit.

(ADZMA10*)

IF STYLE/REPLY CODE(s) AL, AM OR AN WERE ENTERED FOR MRC AKCV, YOU MUST ANSWER MRC (ASDB)

AKCV*DDRIVE TYPE

INDICATES THE TYPE OF DRIVE FOR TURNING,ROTATING,OR POSITIONING THE MECHANISM.

Enter the applicable reply code from the table below

(AKCVDAN*;AKCVDAP$DAL*;AKCVDAP$$DAL*)

Table 1
	Reply Code (AG25)	Reply
	AJ	CROSS RECESS
	AL	HEXAGON
	AP	KNURL
	AH	SLOTTED
	AM	SQUARE
	AN	SQUARE RECESS

ARQSDCONSTRUCTION

THE STRUCTURAL CHARACTERISTIC OF THE ITEM. PLEASE USE MRC CQCF IN PLACE OF THIS DISCONTINUED MRC.

Enter the applicable reply code from the table below

(ARQSDAAQ*;ARQSDABB$DABB*)

Table 1
	Reply Code (AL59)	Reply
	ABB	SECTIONALIZED
	AAQ	SOLID

WGHTJWEIGHT

A RELATIVE MEASURE OF THE MASS OF AN ITEM WITH RESPECT TO ITS DENSITY. PLEASE USE MRC ASHR IN PLACE OF THIS DISCONTINUED MRC.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(WGHTJK2.0*)

Table 1
	Reply Code (AB10)	Reply
	D	GRAINS
	A	GRAMS
	K	KILOGRAMS
	U	OUNCES
	P	POUNDS

ARAG*JCURRENT RATING

THE AMOUNT OF CURRENT FOR WHICH THE ITEM IS DESIGNED.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ARAGJL2.0*)

Table 1
	Reply Code (AC30)	Reply
	A	AMPERES
	U	MICROAMPERES
	L	MILLIAMPERES

IF STYLE/REPLY CODE(s) P WERE ENTERED FOR MRC RADC, YOU MUST ANSWER MRC (RADD)

RADC*DRADIOACTIVE CONTENT

AN INDICATION OF WHETHER OR NOT THE ITEM CONTAINS RADIOACTIVE MATERIALS.

Enter the applicable reply code from the table below

(RADCDP)

Table 1
	Reply Code (AN54)	Reply
	P	CONTAINS RADIOACTIVE MATERIAL

TEST*JTEST DATA DOCUMENT

THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.

Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.

(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)

Table 1
	Reply Code (AC28)	Reply
	A	SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
	B	STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
	C	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

SPCL*GSPECIAL TEST FEATURES

TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.

Enter the reply in clear text.

(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)

ZZZV*GFSC APPLICATION DATA

THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.

Enter the name of the next higher classifiable assembly in clear text.

(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)

ZZZW*GDEPARTURE FROM CITED DOCUMENT

THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.

Enter the reply in clear text.

(ZZZWGAS MODIFIED BY MATERIAL*)

ZZZX*GDEPARTURE FROM CITED DESIGNATOR

THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.

Enter the reply in clear text.

(ZZZXGAS MODIFIED BY MATERIAL*)

ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION

A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.

Enter the Reply Code from the table below.

(ELCDDA*)

Table 1
	Reply Code (AN58)	Reply
	A	ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD

RADD*JRADIONUCLIDES DATA

THE NAME AND AMOUNT OF THE RADIONUCLIDE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(RADDJJGAAGD2.0*)

Table 1
	Reply Code (AG67)	Reply
	JF	CURIES
	JH	MICROCURIES
	JG	MILLICURIES

Table 2
	Reply Code (AN55)	Reply
	AAAB	ACTINIUM (89) AC-227
	AAAC	ACTINIUM (89) AC-228
	AAAD	AMERICIUM (95) AM-241
	AAAE	AMERICIUM (95) AM-243
	AAAF	ANTIMONY (51) SB-122
	AAAG	ANTIMONY (51) SB-124
	AAAH	ANTIMONY (51) SB-125
	AAAJ	ARGON (18) AR-37
	AAAK	ARGON (18) AR-41
	AAAL	ARGON (18) AR-41, UNCOMPRESSED
	AAAM	ARSENIC (33) AS-73
	AAAN	ARSENIC (33) AS-74
	AAAP	ARSENIC (33) AS-76
	AAAQ	ARSENIC (33) AS-77
	AAAR	ASTATINE (85) AT-211
	AAAS	BARIUM (56) BA-131
	AAAT	BARIUM (56) BA-133
	AAAW	BARIUM (56) BA-140
	AAAX	BERKELIUM (97) BK-249
	AAAY	BERYLLIUM (4) BE-7
	AAAZ	BISMUTH (83) BI-206
	AABA	BISMUTH (83) BI-207
	AABB	BISMUTH (83) BI-210
	AABC	BISMUTH (83) BI-212
	AABD	BROMINE (35) BR-82
	AABE	CADMIUM (48) CD-109
	AABG	CADMIUM (48) CD-115
	AABF	CADMIUM (48) CD-115M
	AABH	CALCIUM (20) CA-45
	AABJ	CALCIUM (20) CA-47
	AABK	CALIFORNIUM /98/ CF-249
	AABL	CALIFORNIUM /98/ CF-250
	AABM	CALIFORNIUM /98/ CF-252
	AABN	CARBON (6) C-14
	AABP	CERIUM (58) CE-141
	AABQ	CERIUM (58) CE-143
	AABR	CERIUM (58) CE-144
	AABS	CESIUM (55) CS-131
	AABW	CESIUM (55) CS-134
	AABT	CESIUM (55) CS-134M
	AABX	CESIUM (55) CS-135
	AABY	CESIUM (55) CS-136
	AABZ	CESIUM (55) CS-137
	AACA	CHLORINE (17) CL-36
	AACB	CHLORINE (17) CL-38
	AACC	CHROMIUM (24) CR-51
	AACD	COBALT (27) CO-56
	AACE	COBALT (27) CO-57
	AACG	COBALT (27) CO-58
	AACF	COBALT (27) CO-58M
	AACH	COBALT (27) CO-60
	AACJ	COPPER (29) CU-64
	AACK	CURIUM (96) CM-242
	AACL	CURIUM (96) CM-243
	AACM	CURIUM (96) CM-244
	AACN	CURIUM (96) CM-245
	AACP	CURIUM (96) CM-246
	AACQ	DYSPROSIUM (66) DY-154
	AACR	DYSPROSIUM (66) DY-165
	AACS	DYSPROSIUM (66) DY-166
	AACT	ERBIUM (68) ER-169
	AACW	ERBIUM (68) ER-171
	AACX	EUROPIUM (63) EU-150
	AACZ	EUROPIUM (63) EU-152
	AACY	EUROPIUM (63) EU-152M
	AADA	EUROPIUM (63) EU-154
	AADB	EUROPIUM (63) EU-155
	AADC	FLUORINE (9) F-18
	AADD	GADOLINIUM (64) GD-153
	AADE	GADOLINIUM (64) GD-159
	AADF	GALLIUM (31) GA-67
	AADG	GALLIUM (31) GA-72
	AADH	GERMANIUM (32) GE-71
	AADJ	GOLD (79) AU-193
	AADK	GOLD (79) AU-194
	AADL	GOLD (79) AU-195
	AADM	GOLD (79) AU-196
	AADN	GOLD (79) AU-198
	AADP	GOLD (79) AU-199
	AADQ	HAFNIUM (72) HF-181
	AADR	HOLMIUM (67) HO-166
	AADS	INDIUM (49) IN-113M
	AADT	INDIUM (49) IN-114M
	AADX	INDIUM (49) IN-115
	AADW	INDIUM (49) IN-115M
	AADY	IODINE (53) I-124
	AADZ	IODINE (53) I-125
	AAEA	IODINE (53) I-126
	AAEB	IODINE (53) I-129
	AAEC	IODINE (53) I-131
	AAED	IODINE (53) I-132
	AAEE	IODINE (53) I-133
	AAEF	IODINE (53) I-134
	AAEG	IODINE (53) I-135
	AAEH	IRIDIUM (77) IR-190
	AAEJ	IRIDIUM (77) IR-192
	AAEK	IRIDIUM (77) IR-194
	AAEL	IRON (26) FE-55
	AAEM	IRON (26) FE-59
	AAEQ	KRYPTON (36) KR-85
	AAER	KRYPTON (36) KR-85, UNCOMPRESSED
	AAEN	KRYPTON (36) KR-85M
	AAEP	KRYPTON (36) KR-85M, UNCOMPRESSED
	AAES	KRYPTON (36) KR-87
	AAET	KRYPTON (36) KR-87, UNCOMPRESSED
	AAEW	LANTHANUM (57) LA-140
	AAEX	LEAD (82) PB-203
	AAEY	LEAD (82) PB-210
	AAEZ	LEAD (82) PB-212
	AAFA	LUTECIUM (71) LU-172
	AAFB	LUTECIUM (71) LU-177
	AAFC	MAGNESIUM (12) MG-28
	AAFD	MANGANESE (25) MN-52
	AAFE	MANGANESE (25) MN-54
	AAFF	MANGANESE (25) MN-56
	AAFH	MERCURY (80) HG-197
	AAFG	MERCURY (80) HG-197M
	AAFJ	MERCURY (80) HG-203
	AAFK	MIXED FISSION PRODUCTS MF-P
	AAFL	MOLYBDENUM (42) MO-99
	AAFM	NEODYMIUM (60) ND-147
	AAFN	NEODYMIUM (60) ND-149
	AAFP	NEPTUNIUM (93) NP-237
	AAFQ	NEPTUNIUM (93) NP-239
	AAFR	NICKEL (28) NI-56
	AAFS	NICKEL (28) NI-59
	AAFT	NICKEL (28) NI-63
	AAFW	NICKEL (28) NI-65
	AAFX	NIOBIUM (41) NB-93M
	AAFY	NIOBIUM (41) NB-95
	AAFZ	NIOBIUM (41) NB-97
	AAGA	OSMIUM (76) OS-185
	AAGC	OSMIUM (76) OS-191
	AAGB	OSMIUM (76) OS-191M
	AAGD	OSMIUM (76) OS-193
	AAGE	PALLADIUM (46) PD-103
	AAGF	PALLADIUM (46) PD-109
	AAGG	PHOSPHORUS (15) P-32
	AAGH	PLATINUM (78) PT-191
	AAGJ	PLATINUM (78) PT-193
	AAGK	PLATINUM (78) PT-193M
	AAGM	PLATINUM (78) PT-197
	AAGL	PLATINUM (78) PT-197M
	AAGN	PLUTONIUM (94) PU-238
	AAGP	PLUTONIUM (94) PU-239
	AAGQ	PLUTONIUM (94) PU-240
	AAGR	PLUTONIUM (94) PU-241
	AAGS	PLUTONIUM (94) PU-242
	AAGT	POLONIUM (84) PO-210
	AAGW	POTASSIUM (19) K-42
	AAGX	POTASSIUM (19) K-43
	AAGY	PRASEODYMIUM (59) PR-142
	AAGZ	PRASEODYMIUM (59) PR-143
	AAHA	PROMETHIUM (61) PM-147
	AAHB	PROMETHIUM (61) PM-149
	AAHC	PROTACTINIUM (91) PA-230
	AAHD	PROTACTINIUM (91) PA-231
	AAHE	PROTACTINIUM (91) PA-233
	AAHF	RADIUM (88) RA-223
	AAHG	RADIUM (88) RA-224
	AAHH	RADIUM (88) RA-226
	AAHJ	RADIUM (88) RA-228
	AAHK	RADON (86) RN-220
	AAHL	RADON (86) RN-222
	AAHM	RHENIUM (75) RE-183
	AAHN	RHENIUM (75) RE-186
	AAHP	RHENIUM (75) RE-187
	AAHQ	RHENIUM (75) RE-188
	AAHR	RHENIUM (75) RE-NATURAL
	AAHS	RHODIUM (45) RH-103M
	AAHT	RHODIUM (45) RH-105
	AAHW	RUBIDIUM (37) RB-86
	AAHX	RUBIDIUM (37) RB-87
	AAHY	RUBIDIUM (37) RB-NATURAL
	AAJA	RUTHENIUM (44) RU-103
	AAJB	RUTHENIUM (44) RU-105
	AAJC	RUTHENIUM (44) RU-106
	AAHZ	RUTHENIUM (44) RU-97
	AAJD	SAMARIUM (62) SM-145
	AAJE	SAMARIUM (62) SM-147
	AAJF	SAMARIUM (62) SM-151
	AAJG	SAMARIUM (62) SM-153
	AAJH	SCANDIUM (21) SC-46
	AAJJ	SCANDIUM (21) SC-47
	AAJK	SCANDIUM (21) SC-48
	AAJL	SELENIUM (34) SE-75
	AAJM	SILICON (14) SI-31
	AAJN	SILVER (47) AG-105
	AAJP	SILVER (47) AG-110M
	AAJQ	SILVER (47) AG-111
	AAJR	SODIUM (11) NA-22
	AAJS	SODIUM (11) NA-24
	AAJW	STRONTIUM (38) SR-85
	AAJT	STRONTIUM (38) SR-85M
	AAJX	STRONTIUM (38) SR-89
	AAJY	STRONTIUM (38) SR-90
	AAJZ	STRONTIUM (38) SR-91
	AAKA	STRONTIUM (38) SR-92
	AAKB	SULPHUR (16) S-35
	AAKC	TANTALUM (73) TA-182
	AAKE	TECHNETIUM (43) TC-96
	AAKD	TECHNETIUM (43) TC-96M
	AAKG	TECHNETIUM (43) TC-97
	AAKF	TECHNETIUM (43) TC-97M
	AAKJ	TECHNETIUM (43) TC-99
	AAKH	TECHNETIUM (43) TC-99M
	AAKK	TELLURIUM (52) TE-125M
	AAKM	TELLURIUM (52) TE-127
	AAKL	TELLURIUM (52) TE-127M
	AAKP	TELLURIUM (52) TE-129
	AAKN	TELLURIUM (52) TE-129M
	AAKQ	TELLURIUM (52) TE-131M
	AAKR	TELLURIUM (52) TE-132
	AAKS	TERBIUM (65) TB-160
	AAKT	THALLIUM (81) TL-200
	AAKW	THALLIUM (81) TL-201
	AAKX	THALLIUM (81) TL-202
	AAKY	THALLIUM (81) TL-204
	AAKZ	THORIUM (90) TH-227
	AALA	THORIUM (90) TH-228
	AALB	THORIUM (90) TH-230
	AALC	THORIUM (90) TH-231
	AALD	THORIUM (90) TH-232
	AALE	THORIUM (90) TH-234
	AALF	THORIUM (90) TH-NATURAL
	AALG	THULIUM (69) TM-168
	AALH	THULIUM (69) TM-170
	AALJ	THULIUM (69) TM-171
	AALK	TIN (50) SN-113
	AALL	TIN (50) SN-117M
	AALM	TIN (50) SN-121
	AALN	TIN (50) SN-125
	AALP	TRITIUM (1) H-3
	AALQ	TRITIUM (1) H-3 AS GAS, LUMINOUS PAINT, OR ADSORBED ON SOLID MATERIAL
	AALR	TUNGSTEN (74) W-181
	AALS	TUNGSTEN (74) W-185
	AALT	TUNGSTEN (74) W-187
	AALW	URANIUM (92) U-230
	AALX	URANIUM (92) U-232
	AALY	URANIUM (92) U-233
	AALZ	URANIUM (92) U-234
	AAMA	URANIUM (92) U-235
	AAMB	URANIUM (92) U-236
	AAMC	URANIUM (92) U-238
	AAMF	URANIUM (92) U-DEPLETED
	AAME	URANIUM (92) U-ENRICHED
	AAMD	URANIUM (92) U-NATURAL
	AAMG	VANADIUM (23) V-48
	AAMH	VANADIUM (23) V-49
	AAMJ	XENON (54) XE-125
	AAMK	XENON (54) XE-131M
	AAML	XENON (54) XE-131M, UNCOMPRESSED
	AAMM	XENON (54) XE-133
	AAMN	XENON (54) XE-133, UNCOMPRESSED
	AAMP	XENON (54) XE-135
	AAMQ	XENON (54) XE-135, UNCOMPRESSED
	AAMR	YTTERBIUM (70) YB-175
	AAMS	YTTRIUM (39) Y-88
	AAMT	YTTRIUM (39) Y-90
	AAMX	YTTRIUM (39) Y-91
	AAMW	YTTRIUM (39) Y-91M
	AAMY	YTTRIUM (39) Y-92
	AAMZ	YTTRIUM (39) Y-93
	AANA	ZINC (30) ZN-65
	AANC	ZINC (30) ZN-69
	AANB	ZINC (30) ZN-69M
	AAND	ZIRCONIUM (40) ZR-93
	AANE	ZIRCONIUM (40) ZR-95
	AANF	ZIRCONIUM (40) ZR-97

PRMT*DPRECIOUS MATERIAL

IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.

Enter the applicable reply code from the table below

(PRMTDPTA000*;PRMTDIRA000$DAGA000*;PRMTDIRA000$$DAGA000*)

Table 1
	Reply Code (MA01)	Reply
	AUA000	GOLD
	IRA000	IRIDIUM
	AZA000	OSMIUM
	PDA000	PALLADIUM
	PTA000	PLATINUM
	RHA000	RHODIUM
	RTA000	RUTHENIUM
	AGA000	SILVER

PMWT*JPRECIOUS MATERIAL AND WEIGHT

AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(PMWTJRHA000F2.0*;PMWTJRHA000F2.0$JRHA000F2.0*;PMWTJRHA000F2.0$$JRHA000F2.1*)

Table 1
	Reply Code (MA01)	Reply
	AUA000	GOLD
	IRA000	IRIDIUM
	AZA000	OSMIUM
	PDA000	PALLADIUM
	PTA000	PLATINUM
	RHA000	RHODIUM
	RTA000	RUTHENIUM
	AGA000	SILVER

Table 2
	Reply Code (AG14)	Reply
	E	GRAINS, TROY
	R	GRAMS
	F	OUNCES, TROY

PMLC*JPRECIOUS MATERIAL AND LOCATION

AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.

Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.

(PMLCJAZA0002.0*;PMLCJAZA0002.0$JAZA0002.0*;PMLCJAZA0002.0$$JAZA0002.1*)

Table 1
	Reply Code (MA01)	Reply
	AUA000	GOLD
	IRA000	IRIDIUM
	AZA000	OSMIUM
	PDA000	PALLADIUM
	PTA000	PLATINUM
	RHA000	RHODIUM
	RTA000	RUTHENIUM
	AGA000	SILVER

SUPP*GSUPPLEMENTARY FEATURES

CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.

Enter the reply in clear text.Separate multiple replies with a semicolon.

(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)

This MRC replaced MRC ZZZP

The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.

PDNB*APURCHASE DESCRIPTION IDENTIFICATION

THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.

Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.

(ZZZPJ81A37-30624A*)

Reply to this MRC in accordance with Volume 3.

AGAV*GEND ITEM IDENTIFICATION

THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.

Enter the reply in clear text.

(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)

Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.

CRTL*ACRITICALITY CODE JUSTIFICATION

THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.

Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.

(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)

If document availability code B, D, F, OR H, reply to MRC PRPY.

PRPY*APROPRIETARY CHARACTERISTICS

IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.

Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.

(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)

CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY

THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.

Enter the reply in clear text.

(CXCYGLINE PROCESSOR CONTROL BOARD*)

ELRN*GEXTRA LONG REFERENCE NUMBER

A REFERENCE NUMBER EXCEEDING 32 POSITIONS.

Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.

(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)

In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.

FEAT*GSPECIAL FEATURES

THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.

Enter the reply in clear text. Separate multiple replies with a semicolon.

(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	Reply Code (AN62)	Reply
	V	FEDERAL MOTOR VEHICLE SAFETY STANDARD
	F	FLAMMABILITY STANDARD
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	U	INTERNATIONAL STD/SPEC
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	B	NATIONAL STD/SPEC
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	BE	ANNEALED
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BF	BOND
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CF	CIRCUMFERENCE
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	AV	CONFIGURATION
	CS	CONSTRUCTION
	BG	CORE CONDITION
	CB	CUT OFF
	AM	DELAY CLASS
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	DU	DUPLEX
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	AK	FILE NUMBER
	FN	FINISH
	FB	FLAVOR
	BH	FLUX PERCENTAGE
	FM	FORM
	FA	FORMULA
	AJ	GAGE STOCK NUMBER
	GR	GRADE
	GA	GRADUATION
	AX	GRANULES
	AY	GRIT
	GB	GROUND
	GP	GROUP
	HA	HEAVY DUTY
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LV	LEVEL
	LT	LIMIT
	MK	MARK
	AA	MARKER
	AD	MASK APERTURE
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	TA	MEDIUM TEMPER
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	AQ	NATURAL
	AU	NON-DELAY CLASS
	NR	NUMBER
	BL	OUTFIT NUMBER
	PA	PARAGRAPH
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	PD	POLISHED
	PB	PRESSURE RATING
	QA	QUALITY
	QB	QUENCHED
	RN	RANGE
	AE	RAPID
	RT	RATING
	RF	REFERENCE NUMBER
	RA	REGULAR DUTY
	BJ	RMA FLUX
	SJ	SALIENT CHARACTERISTICS
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	BD	SERIALIZED
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	AG	SLOW
	TC	SOFT TEMPER
	SK	SOURCE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	AW	STANDARD
	SR	STRAIGHT
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	BK	SUPPORT
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	AZ	UNSERIALIZED
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH

ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS

A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.

Enter the reply in clear text.

(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)

Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.

MDCLJMATERIAL DOCUMENT AND CLASSIFICATION

THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.

Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.

(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)

Table 1
	ISAC Field Indicator (5000)	Location
	3ACN	CORE
	3AEE	OVERALL
	3HOU	LOCATION NOT OTHERWISE SPECIFIED
	3IBG	ANODE

Table 2
	Reply Code (AP33)	Reply
	Q	AEROSPACE MATERIAL SPEC STD
	J	AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
	G	ASSN STD
	A	COMMERCIAL ITEM DESCRIPTION
	K	DEF STAN/SPEC
	B	FED SPEC
	C	FED STD
	L	GOVERNMENT STD/SPEC
	N	INTERNATIONAL STD/SPEC
	F	MFR REF
	D	MIL SPEC
	E	MIL STD
	H	NATIONAL SPEC
	P	NATIONAL STD
	M	NATIONAL STD/SPEC

Table 3
	Reply Code (AP18)	Reply
	M	10TH MATERIAL RESPONSE
	N	11TH MATERIAL RESPONSE
	P	12TH MATERIAL RESPONSE
	Q	13TH MATERIAL RESPONSE
	R	14TH MATERIAL RESPONSE
	S	15TH MATERIAL RESPONSE
	T	16TH MATERIAL RESPONSE
	U	17TH MATERIAL RESPONSE
	W	18TH MATERIAL RESPONSE
	X	19TH MATERIAL RESPONSE
	B	1ST MATERIAL RESPONSE
	Y	20TH MATERIAL RESPONSE
	Z	21ST MATERIAL RESPONSE
	V	22ND MATERIAL RESPONSE
	C	2ND MATERIAL RESPONSE
	D	3RD MATERIAL RESPONSE
	E	4TH MATERIAL RESPONSE
	F	5TH MATERIAL RESPONSE
	H	6TH MATERIAL RESPONSE
	J	7TH MATERIAL RESPONSE
	K	8TH MATERIAL RESPONSE
	L	9TH MATERIAL RESPONSE
	G	ALL MATERIAL RESPONSES
	A	SINGLE MATERIAL RESPONSE

IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)

STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION

THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.

(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)

Table 1
	ISAC Field Indicator (5000)	Location
	3ACN	CORE
	3AEE	OVERALL
	3HOU	LOCATION NOT OTHERWISE SPECIFIED

Table 2
	Reply Code (AP33)	Reply
	G	ASSN STD
	A	COMMERCIAL ITEM DESCRIPTION
	K	DEF STAN/SPEC
	B	FED SPEC
	C	FED STD
	L	GOVERNMENT STD/SPEC
	N	INTERNATIONAL STD/SPEC
	F	MFR REF
	D	MIL SPEC
	E	MIL STD
	H	NATIONAL SPEC
	P	NATIONAL STD
	M	NATIONAL STD/SPEC

Table 3
	Reply Code (AP39)	Reply
	M	10TH TREATMENT RESPONSE
	N	11TH TREATMENT RESPONSE
	P	12TH TREATMENT RESPONSE
	Q	13TH TREATMENT RESPONSE
	R	14TH TREATMENT RESPONSE
	S	15TH TREATMENT RESPONSE
	B	1ST TREATMENT RESPONSE
	C	2ND TREATMENT RESPONSE
	D	3RD TREATMENT RESPONSE
	E	4TH TREATMENT RESPONSE
	F	5TH TREATMENT RESPONSE
	H	6TH TREATMENT RESPONSE
	J	7TH TREATMENT RESPONSE
	K	8TH TREATMENT RESPONSE
	L	9TH TREATMENT RESPONSE
	G	ALL TREATMENT RESPONSES
	A	SINGLE TREATMENT RESPONSE

CLQL*GCOLLOQUIAL NAME

A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.

Enter the reply in clear text.

(CLQLGWOVEN WIRE CLOTH*)