An insulated van type trailer designed for specific load distribution and equipped with special shock resistant suspension. It provides personnel operating space and is used to house and transport guided missile test equipment. It may include air conditioning and heating units. Excludes:TRAILER, VAN.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED12984*)
ATYXJCAPACITY RATING
THE RATED CAPACITY OF THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ATYXJBY2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| BX | METRIC TONS |
| BY | TONS |
AHGRDINSULATED FEATURE
AN INDICATION OF WHETHER OR NOT AN INSULATED FEATURE IS INCLUDED.
Enter the applicable reply code from the table below
(AHGRDC*;AHGRDB$DB*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
ADJUJINSIDE LENGTH
A MEASUREMENT OF THE LONGEST INSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJUJAA2.0*;ADJUJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJTJINSIDE WIDTH
AN INSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJTJAB2.0*;ADJTJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFMQJINSIDE HEIGHT
AN INSIDE MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN ITEM,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFMQJAA2.0*;AFMQJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CGPL*JDOOR LOCATION AND QUANTITY
INDICATES THE LOCATION AND NUMBER OF DOORS INCLUDED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(CGPLJCWE2*;CGPLJCWE2$$JCWE3*)
| Table 1 |
| Reply Code (AJ91) | Reply |
| CWF | FRONT DOOR |
| ABT | FRONT END |
| CWD | FRONT END CENTER |
| CWE | FRONT END LEFT SIDE |
| BLP | FRONT LEFT SIDE |
| BYG | FRONT RIGHT SIDE |
| ACF | LEFT SIDE |
| BXN | LEFT-HAND SIDE CENTER |
| BXM | LEFT-HAND SIDE DOOR |
| BXP | LEFT-HAND SIDE REAR |
| CWK | REAR DOOR |
| CWG | REAR END |
| CWH | REAR END CENTER |
| CWJ | REAR END LEFT SIDE |
| ACR | RIGHT SIDE |
| BXT | RIGHT-HAND SIDE CENTER |
| BXS | RIGHT-HAND SIDE DOOR |
| BXW | RIGHT-HAND SIDE REAR |
CGPM*DBODY HORIZONTAL OPENING LOCATION
INDICATES THE LOCATION OF THE HORIZONTAL OPENING(S) IN THE BODY.
Enter the applicable reply code from the table below
(CGPMDA)
| Table 1 |
| Reply Code (AJ91) | Reply |
| A | ANY ACCEPTABLE |
| CWL | END PANEL |
| CWM | SIDE PANEL |
BRSDDTAILGATE
AN INDICATION OF WHETHER OR NOT A TAILGATE IS INCLUDED.
Enter the applicable reply code from the table below
(BRSDDC*;BRSDDB$DB*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
ALYPDFLOOR LEVEL DESIGN
THE DESIGN OF THE FLOOR LEVEL OF THE ITEM.
Enter the applicable reply code from the table below
(ALYPDAR*;ALYPDAM$DAN*)
| Table 1 |
| Reply Code (AH86) | Reply |
| AN | FLAT |
| AR | THREE LEVEL |
| AM | TWO LEVEL |
CGNWDLOADING RAMP
AN INDICATION OF WHETHER OR NOT A LOADING RAMP(S) IS INCLUDED.
Enter the applicable reply code from the table below
(CGNWDB*;CGNWDC$DB*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
CGPNDBODY FRONT SHAPE
THE PHYSICAL CONFIGURATION OF THE FRONT OF THE BODY.
Enter the applicable reply code from the table below
(CGPNDACY)
| Table 1 |
| Reply Code (AD07) | Reply |
| A | ANY ACCEPTABLE |
| ACY | CURVED |
| ATG | STRAIGHT |
CGPQ*JWINDOW LOCATION AND QUANTITY
INDICATES THE LOCATION AND NUMBER OF WINDOWS INCLUDED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(CGPQJCWF2*;CGPQJCWF2$$JCWF3*)
| Table 1 |
| Reply Code (AJ91) | Reply |
| CWF | FRONT DOOR |
| ABT | FRONT END |
| CWD | FRONT END CENTER |
| CWE | FRONT END LEFT SIDE |
| BLP | FRONT LEFT SIDE |
| BYG | FRONT RIGHT SIDE |
| ACF | LEFT SIDE |
| BXN | LEFT-HAND SIDE CENTER |
| BXM | LEFT-HAND SIDE DOOR |
| BXP | LEFT-HAND SIDE REAR |
| CWK | REAR DOOR |
| CWG | REAR END |
| CWH | REAR END CENTER |
| CWJ | REAR END LEFT SIDE |
| ACR | RIGHT SIDE |
| BXT | RIGHT-HAND SIDE CENTER |
| BXS | RIGHT-HAND SIDE DOOR |
| BXW | RIGHT-HAND SIDE REAR |
CGPRDINTERIOR ELECTRIC OUTLET
AN INDICATION OF WHETHER OR NOT AN INTERIOR ELECTRIC OUTLET(S) IS INCLUDED.
Enter the applicable reply code from the table below
(CGPRDC*;CGPRDB$DB*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
ELEC*BVOLTAGE IN VOLTS
THE TOTAL ELECTRICAL VOLTAGE.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ELECB2.0*;ELECB2.0$$BM2.0*)
APYBDVENTILATION FEATURE
AN INDICATION OF WHETHER OR NOT A VENTILATION FEATURE IS INCLUDED.
Enter the applicable reply code from the table below
(APYBDB*;APYBDC$DB*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
ABHPJOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAA2.0*;ABHPJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMKJOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAC2.0*;ABMKJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKWJOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAC2.0*;ABKWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CGNXJDISTANCE FROM BODY FRONT TO DRAWBAR COUPLER CENTER
THE DISTANCE FROM THE FRONT OF THE BODY TO THE CENTER OF THE DRAWBAR COUPLER.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CGNXJAC2.0*;CGNXJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BPQWDSUSPENSION TYPE
INDICATES THE TYPE OF SUSPENSION PROVIDED.
Enter the applicable reply code from the table below
(BPQWDESW*;BPQWDEFJ$$DEFK*)
| Table 1 |
| Reply Code (AK54) | Reply |
| EFG | CASTER WHEEL |
| EST | CASTER WHEEL W/THROUGH SHAFT AXLE |
| ESW | CASTER WHEEL W/TRUNNION AXLE |
| EFH | GIB MOUNTED ROCKER ARM |
| EFJ | INDIVIDUAL COIL SPRING |
| EFK | INDIVIDUAL FIXED SPRING |
| EFL | INDIVIDUAL LEAF SPRING |
| EFM | ROCKER ARM W/STUD SPINDLE AXLE |
| EFN | ROCKER ARM W/THROUGH SHAFT AXLE |
| EFP | ROCKER ARM W/TRUNNION AXLE |
| EFQ | STUD SPINDLE AXLE |
| EFR | THROUGH SHAFT AXLE |
| EFS | TRUNNION AXLE |
| FHX | TUBULAR STUB AXLE |
| FHY | WALKING BEAM W/SPRING |
AZBT*LWHEEL ARRANGEMENT STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE ARRANGEMENT OF THE WHEEL(S).
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AZBTL49)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAJ1714 | 1 | MIDDLE, SINGLE |
| AAJ1723 | 10 | FRONT, MIDDLE AND REAR, SINGLE |
| AAJ1724 | 11 | REAR TANDEM, SINGLE |
| AAJ1725 | 12 | MIDDLE, DUAL |
| AAJ1726 | 13 | SEMI REAR, DUAL |
| AAJ1727 | 14 | REAR TANDEM, DUAL |
| AAJ1728 | 15 | REAR TANDEM, DUAL |
| AAJ1729 | 16 | MIDDLE TANDEM, DUAL |
| AAJ1730 | 17 | FRONT AND REAR, DUAL |
| AAJ1731 | 18 | REAR, DUAL |
| AAJ1732 | 19 | MIDDLE, SEMI REAR AND REAR, DUAL |
| AAJ1715 | 2 | SEMI REAR, SINGLE |
| AAJ1733 | 20 | FRONT, MIDDLE AND REAR, DUAL |
| AAJ1734 | 21 | REAR TANDEM, DUAL |
| AAJ1735 | 22 | FRONT AND REAR, DUAL |
| AAJ1736 | 23 | FRONT, DUAL, REAR TANDEM, DUAL |
| AAJ1737 | 24 | FRONT TRICYCLE, SINGLE, REAR DUAL |
| AAJ1738 | 25 | FRONT, SINGLE, REAR, DUAL |
| AAJ1739 | 26 | FRONT, SINGLE, REAR TANDEM, DUAL |
| AAJ1740 | 27 | FRONT, DUAL, REAR TANDEM, DUAL |
| AAJ1741 | 28 | FRONT AND REAR TANDEM, DUAL |
| AAJ1742 | 29 | FRONT AND REAR TANDEM, SINGLE |
| AAJ1716 | 3 | REAR, SINGLE |
| AAJ1743 | 30 | FRONT TANDEM, SINGLE, REAR TANDEM, DUAL |
| AAJ1744 | 31 | FRONT TANDEM, SINGLE, REAR TRIPLE, SINGLE |
| AAJ1745 | 32 | FRONT, SINGLE, REAR TRIPLE, SINGLE |
| AAJ1746 | 33 | FRONT TANDEM, SINGLE, REAR TANDEM, SINGLE |
| AAJ1747 | 34 | FRONT, SINGLE, REAR TANDEM, SINGLE |
| AAJ1748 | 35 | REAR, SINGLE |
| AAJ1749 | 36 | FRONT TANDEM, SINGLE, REAR, DUAL |
| AAJ1750 | 37 | FRONT AND REAR, SINGLE |
| AAJ1751 | 38 | FRONT TANDEM, SINGLE, REAR, DUAL |
| AAJ1752 | 39 | FRONT TANDEM, DUAL, REAR, DUAL |
| AAJ1717 | 4 | MIDDLE TANDEM, SINGLE |
| AAJ1753 | 40 | FRONT, SINGLE, REAR, DUAL |
| AAJ1754 | 41 | FRONT, SINGLE, REAR TRIPLE, DUAL |
| AAJ1755 | 42 | FRONT TANDEM, SINGLE, REAR TRIPLE, DUAL |
| AAJ1756 | 43 | FRONT, DUAL, REAR TRIPLE, DUAL |
| AAJ1757 | 44 | FRONT TANDEM, DUAL, REAR TRIPLE, DUAL |
| AAJ1758 | 45 | FRONT, SINGLE, REAR TANDEM, DUAL |
| AAJ1759 | 46 | FRONT TANDEM, SINGLE, REAR TANDEM, DUAL |
| AAJ1760 | 47 | FRONT, DUAL, REAR TANDEM, DUAL |
| AAJ1761 | 48 | FRONT AND REAR TANDEM, DUAL |
| AAJ1762 | 49 | FRONT TRICYCLE, REAR, SINGLE |
| AAJ1718 | 5 | REAR TANDEM, SINGLE |
| AAJ1719 | 6 | FRONT AND REAR, SINGLE |
| AAJ1720 | 7 | FRONT TRICYCLE, SINGLE, REAR, SINGLE |
| AAJ1721 | 8 | FRONT, SINGLE, REAR TANDEM, SINGLE |
| AAJ1722 | 9 | MIDDLE, SEMI REAR AND REAR, SINGLE |
CGPF*DSERVICE BRAKE TYPE
INDICATES THE TYPE OF SERVICE BRAKE(S) PROVIDED ON THE ITEM.
Enter the applicable reply code from the table below
(CGPFDLL*;CGPFDEA$DLK*)
| Table 1 |
| Reply Code (AG25) | Reply |
| EG | AIR |
| LK | AIR-HYDRAULIC |
| A | ANY ACCEPTABLE |
| GJ | ELECTRIC |
| DJ | HYDRAULIC |
| EA | VACUUM |
| LL | VACUUM-HYDRAULIC |
BPGNDPARKING BRAKES
AN INDICATION OF WHETHER OR NOT PARKING BRAKES ARE INCLUDED.
Enter the applicable reply code from the table below
(BPGNDC*;BPGNDB$DC*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
CCRWDDRAWBAR TYPE
INDICATES THE TYPE OF DRAWBAR PROVIDED.
Enter the applicable reply code from the table below
(CCRWDEFY*;CCRWDEFZ$DEGB*)
| Table 1 |
| Reply Code (AK54) | Reply |
| A | ANY ACCEPTABLE |
| EFY | HINGED A-FRAME |
| EFZ | HINGED TONGUE |
| EGA | RIGID A-FRAME |
| EGB | RIGID TONGUE |
CGPGDDRAWBAR CHARACTERISTIC
AN INDICATION OF THE CHARACTERISTIC(S) OF THE DRAWBAR.
Enter the applicable reply code from the table below
(CGPGDBG)
| Table 1 |
| Reply Code (AH28) | Reply |
| A | ANY ACCEPTABLE |
| BG | FIXED |
| AX | TELESCOPIC |
CGPHDDRAWBAR COUPLER TYPE
INDICATES THE TYPE OF DRAWBAR COUPLER PROVIDED.
Enter the applicable reply code from the table below
(CGPHDAG)
| Table 1 |
| Reply Code (AH98) | Reply |
| AW | LUNETTE |
| AG | PIN |
BXJLDRETRACTABLE SUPPORT FEATURE
AN INDICATION OF WHETHER OR NOT A RETRACTABLE SUPPORT FEATURE IS INCLUDED.
Enter the applicable reply code from the table below
(BXJLDC*;BXJLDB$DB*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
AYFN*DSUPPORT TYPE
INDICATES THE TYPE OF SUPPORT USED WITH THE ITEM.
Enter the applicable reply code from the table below
(AYFNDBQ)
| Table 1 |
| Reply Code (AM61) | Reply |
| BQ | ADJUSTABLE LEG |
| BR | WHEEL |
CGPJ*DAUXILIARY SUPPORT TYPE
INDICATES THE TYPE OF AUXILIARY SUPPORT(S) INCLUDED WITH THE ITEM.
Enter the applicable reply code from the table below
(CGPJDAP)
| Table 1 |
| Reply Code (AM61) | Reply |
| A | ANY ACCEPTABLE |
| BS | JACK |
| AP | LEG |
| BT | OUTRIGGER |
CGPKDTOWING PINTLE HOOK
AN INDICATION OF WHETHER OR NOT A TOWING PINTLE HOOK(S) IS INCLUDED.
Enter the applicable reply code from the table below
(CGPKDB*;CGPKDC$DC*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| CS | CONSTRUCTION |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| FN | FINISH |
| FM | FORM |
| FA | FORMULA |
| GR | GRADE |
| GP | GROUP |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| NR | NUMBER |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| QA | QUALITY |
| RN | RANGE |
| RT | RATING |
| RF | REFERENCE NUMBER |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
ANTN*GSPECIFIC USE
THE REQUIRED PURPOSE OR APPLICATION FOR WHICH THE ITEM IS DESIGNED.
Enter clear text.
(ANTNGCLEARTEXT)
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCF2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CF | CUBIC FEET |
| CM | CUBIC METERS |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAY0)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAU3)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.
(NTRDA80-05-28*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(ZZZPJ81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information