A stool having a revolving seat mounted on a nonfolding base. It may have a footrest.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED11342*)
IF STYLE/REPLY CODE(s) AQ3 OR AQ3A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BGFY and BGFK)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLAQ3A)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| DR00984 | AQ3 | W/O FOOTREST |
| DR00985 | AQ3A | W/FOOTREST |
BGFK*JSEAT TOP HEIGHT FROM FLOOR
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE FLOOR TO TOP OF THE SEAT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BGFKJAC2.0*;BGFKJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BGFY*JTOP OVERALL DIAMETER
THE OVERALL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE TOP,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BGFYJAC2.0*;BGFYJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) ADS OR ADT WERE ENTERED FOR MRC AWET, YOU MUST ANSWER MRC (BGDH)
IF STYLE/REPLY CODE(s) ADN, ADP OR ADT WERE ENTERED FOR MRC AWET, YOU MUST ANSWER MRC (BDRF)
AWET*DBASE TYPE
INDICATES THE TYPE OF BASE FURNISHED WITH THE ITEM.
Enter the applicable reply code from the table below
(AWETDADP*;AWETDADT$DADX*;AWETDADT$$DADX*)
| Table 1 |
| Reply Code (AJ57) | Reply |
| ADL | CONTINUOUS |
| ADM | FLAT |
| ADN | GATE LEG |
| ADQ | ISLAND |
| ADP | LEG |
| ADR | PANEL |
| ADS | PEDESTAL |
| ADT | PEDESTAL ON LEGS |
| ADX | SAWBUCK |
| ANM | SLED |
| ADW | SPIDER |
| AAA | WALL BRACKET |
BGWL*DBASE END FEATURE
THE FEATURE OF THE BASE END ON THE ITEM.
Enter the applicable reply code from the table below
(BGWLDABP)
| Table 1 |
| Reply Code (AK84) | Reply |
| A | ANY ACCEPTABLE |
| ABP | CASTER |
| ABQ | GLIDE |
| ABR | RUBBER TIP |
| ABS | SHOE |
BGDH*APEDESTAL QUANTITY
THE NUMBER OF PEDESTAL(S) PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BGDHA10*)
BDRF*ALEG QUANTITY
THE NUMBER OF LEGS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BDRFA10*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3IBMDST0304*;MATT3IBMDST0304$DALB000*;MATT3IBMDST0304$$DALB000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABE | BASE |
| 3AEE | OVERALL |
| 3BAU | SEAT |
| 3DAA | LEG |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3HPD | UPHOLSTERY |
| 3HPJ | SEAT COVERING |
| 3HZY | PEDESTAL |
| 3IBL | BACK PADDING |
| 3IBM | SEAT PADDING |
| 3IDZ | OVERALL EXCEPT CUSHION |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| FEB000 | IRON CAST |
| LRA000 | LEATHER |
| LRE000 | LEATHER ARTIFICIAL |
| PCA000 | PLASTIC |
| PCCA00 | PLASTIC FOAM |
| PCP000 | PLASTIC POLYAMIDE |
| PCAH00 | PLASTIC POLYURETHANE |
| PCAP00 | PLASTIC VINYL |
| WDB000 | PLYWOOD |
| RCAH00 | RUBBER FOAM |
| STA000 | STEEL |
| ST0304 | STEEL COMP 304 |
| STB000 | STEEL CORROSION RESISTING |
| WDC000 | WOOD |
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(HUES3ABEDWH0000*;HUES3ABEDWH0000$DGY0000*;HUES3ABEDWH0000$$DGY0000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABE | BASE |
| 3AEE | OVERALL |
| 3BAU | SEAT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3HPD | UPHOLSTERY |
| Table 2 |
| Reply Code (AD06) | Reply |
| AL0000 | ALUMINUM |
| BL0000 | BLACK |
| BL0138 | BLACK, JET, RAL 9005 |
| BU0000 | BLUE |
| BR0159 | BROWN, GRAY, RAL 8019 |
| MS0073 | CHROME |
| GY0058 | GRAY, FED STD 595, 26134 |
| GY0002 | GRAY, LIGHT |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| NA0000 | NATURAL |
| RG0000 | ORANGE |
| RE0000 | RED |
| WH0000 | WHITE |
BGDM*HADJUSTMENT TYPE AND LOCATION
INDICATES THE TYPE OF ADJUSTMENT,AND ITS LOCATION.
Enter the applicable Reply Code from Tables 1 & 2 below.
(BGDMHAADACZ2.0*;BGDMHAADACZ2.0$HAADACZ2.0*;BGDMHAADACZ2.0$$HAADACZ2.1*)
| Table 1 |
| Reply Code (AN06) | Reply |
| AAB | HEIGHT |
| AAC | TILTING |
| AAD | WIDTH |
| Table 2 |
| Reply Code (AJ91) | Reply |
| AAA | ANY ACCEPTABLE |
| CXP | APRON |
| APD | ARM |
| BEZ | ARM COVERING |
| DFJ | ARM PADDING |
| BFA | ARM REST |
| AAZ | BACK |
| DST | BACK BORDER |
| BFB | BACK COVERING |
| DRZ | BACK CUSHION COVERING |
| DRT | BACK CUSHION PADDING |
| DXZ | BACK FORM |
| DRR | BACK FRAME |
| DFK | BACK PADDING |
| BEW | BACK PANEL |
| DFA | BACKREST |
| AAX | BASE |
| ADC | BOTH SIDES |
| ABA | BOTTOM |
| BFF | BOTTOM TO TOP CENTER |
| BFG | BOTTOM TO TOP SIDE TO SIDE |
| DRM | BOXING |
| AHP | CENTER |
| AQH | CENTER BACK |
| DXS | CROSS-MEMBER |
| BFJ | CUSHION COVERING |
| BFK | CUSHION PADDING |
| DRX | CUSHION SUPPORT |
| BFL | DOOR |
| DYK | DOOR FRONT |
| APV | DRAWER BOX |
| DYP | DRAWER FRONT |
| DYG | EACH PEDESTAL TOP |
| ABK | EDGE |
| DYS | EITHER SIDE |
| ABB | END |
| AJP | FLANGE |
| BFN | FOOTBOARD |
| BFP | FOOTREST |
| ABS | FRAME |
| ABC | FRONT |
| AEF | FRONT CENTER |
| BEX | FRONT PANEL |
| DSB | GLIDE |
| BFQ | HEADBOARD |
| CLW | INTERIOR |
| DSP | LADDER |
| BFC | LEFT BOTTOM |
| BGR | LEFT BOTTOM TO TOP |
| BGD | LEFT CENTER SIDE |
| BDL | LEFT END |
| ACH | LEFT FRONT |
| DYJ | LEFT PEDESTAL |
| AWN | LEFT REAR |
| ACF | LEFT SIDE |
| DEL | LEG |
| DYY | MIRROR |
| DYL | MODESTY PANEL |
| AAB | OVERALL |
| BFR | OVERALL EXCEPT BASE |
| BFS | OVERALL EXCEPT CUSHION |
| DSC | OVERALL EXCEPT DOOR |
| DYM | OVERALL EXCEPT DOOR FRONT |
| DSL | OVERALL EXCEPT FRAME |
| DSM | OVERALL EXCEPT GLIDE |
| DYN | OVERALL EXCEPT MODESTY PANEL |
| BFT | OVERALL EXCEPT SEAT |
| DYW | OVERALL EXCEPT SHOE |
| DXP | OVERALL EXCEPT SMALL DRAWER FRONT COVERING |
| DSN | OVERALL EXCEPT SPRING |
| BFW | OVERALL EXCEPT TOP |
| BFX | OVERALL EXCEPT TOP COVERING |
| DTD | OVERALL EXCEPT TOP DOOR |
| DYF | OVERALL EXCEPT TOP INSET |
| AGZ | PADDING |
| DRS | PEDESTAL |
| DSX | PEDESTAL COLUMN |
| DYB | PEDESTAL TUBE |
| DPF | PIVOT |
| DEQ | POST |
| BFY | RACK |
| DSQ | RAIL |
| BFD | RIGHT BOTTOM |
| BGS | RIGHT BOTTOM TO TOP |
| BGE | RIGHT CENTER SIDE |
| BFM | RIGHT END |
| ACP | RIGHT FRONT |
| DYH | RIGHT PEDESTAL |
| AWQ | RIGHT REAR |
| ACR | RIGHT SIDE |
| ACA | SEAT |
| BFZ | SEAT COVERING |
| DYQ | SEAT COVERING EXCEPT FACE PANEL |
| DSA | SEAT CUSHION COVERING |
| DRW | SEAT CUSHION PADDING |
| DYR | SEAT FACE PANEL |
| DSR | SEAT FRAME |
| BGA | SEAT PADDING |
| DSW | SEAT RIM |
| DRY | SEAT STRAP |
| DXT | SEAT TOP |
| BGB | SHELF |
| AMB | SHELL |
| BGC | SHOE |
| DYT | SHOE MOUNT |
| ACZ | SIDE |
| DYE | SIDE FRAME |
| BGF | SIDE TO SIDE |
| BFE | SIDE TO SIDE BOTTOM |
| BFH | SIDE TO SIDE CENTER |
| BGL | SIDE TO SIDE TOP |
| DYX | SMALL DRAWER FRONT |
| DXN | SMALL DRAWER FRONT COVERING |
| DME | SPINDLE |
| ALH | SPRING |
| AHB | STRAP |
| DXY | STRETCHER |
| DSS | TABLE FRAME |
| BGG | TABLET ARM |
| ABD | TOP |
| AQK | TOP CENTER |
| BGH | TOP COVERING |
| DXR | TOP INSERT |
| BGJ | TOP LEFT |
| BHZ | TOP LEFT SIDE |
| BGK | TOP RIGHT |
| AER | TOP RIGHT SIDE |
| AHD | TUBE |
| BGM | UNDER THE SEAT |
| BGN | UNDER THE TOP |
| BGP | UPHOLSTERY |
| BGQ | UPHOLSTERY PADDING |
| DXQ | WORK SURFACE |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3ABEDENA000*;SFTT3ABEDENA000$DNLA000*;SFTT3ABEDENA000$$DNLA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABE | BASE |
| 3AEE | OVERALL |
| 3BAU | SEAT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (SF01) | Reply |
| CRA000 | CHROMIUM |
| ENA000 | ENAMEL |
| LQA000 | LACQUER |
| NLA000 | NICKEL |
| ZNA000 | ZINC |
BGDN*DPERIOD DESIGN
THE DESIGN OF AN ITEM DISTINGUISHED BY THE TIME PERIOD IN WHICH THAT PARTICULAR DESIGN CAME INTO USE.
Enter the applicable reply code from the table below
(BGDNDAAF*;BGDNDAAR$DAAW*)
| Table 1 |
| Reply Code (AN07) | Reply |
| AAB | CHARLES OF LONDON |
| AAC | CHIPPENDALE |
| AAD | COLONIAL |
| AAE | CONTEMPORARY |
| AAF | DANISH MODERN |
| AAG | DUNCAN PHYFE |
| AAH | EARLY AMERICAN |
| AAJ | FRENCH PROVINCIAL |
| AAK | HEPPLEWHITE |
| AAL | ITALIAN PROVINCIAL |
| AAM | LAWSON |
| AAN | MEDITERRANEAN |
| AAP | MODERN |
| AAQ | MODERN AMERICAN |
| AAR | RANCH |
| AAS | RENAISSANCE |
| AAT | SHERATON |
| AAW | TRADITIONAL |
| AAX | VICTORIAN |
BGDS*JCUSHION TYPE/LOCATION AND QUANTITY
INDICATES THE TYPE,LOCATION,AND NUMBER OF CUSHION(S) INHERENT IN THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit.
(BGDSJBFNC2*;BGDSJBFNC2$$JBFNC3*;BGDSJBFNC2$JBFNC2*)
| Table 1 |
| Reply Code (AJ91) | Reply |
| CXP | APRON |
| APD | ARM |
| BEZ | ARM COVERING |
| DFJ | ARM PADDING |
| BFA | ARM REST |
| AAZ | BACK |
| DST | BACK BORDER |
| BFB | BACK COVERING |
| DRZ | BACK CUSHION COVERING |
| DRT | BACK CUSHION PADDING |
| DXZ | BACK FORM |
| DRR | BACK FRAME |
| DFK | BACK PADDING |
| BEW | BACK PANEL |
| DFA | BACKREST |
| AAX | BASE |
| ADC | BOTH SIDES |
| ABA | BOTTOM |
| BFF | BOTTOM TO TOP CENTER |
| BFG | BOTTOM TO TOP SIDE TO SIDE |
| DRM | BOXING |
| AHP | CENTER |
| AQH | CENTER BACK |
| DXS | CROSS-MEMBER |
| BFJ | CUSHION COVERING |
| BFK | CUSHION PADDING |
| DRX | CUSHION SUPPORT |
| BFL | DOOR |
| DYK | DOOR FRONT |
| APV | DRAWER BOX |
| DYP | DRAWER FRONT |
| DYG | EACH PEDESTAL TOP |
| ABK | EDGE |
| DYS | EITHER SIDE |
| ABB | END |
| AJP | FLANGE |
| BFN | FOOTBOARD |
| BFP | FOOTREST |
| ABS | FRAME |
| ABC | FRONT |
| AEF | FRONT CENTER |
| BEX | FRONT PANEL |
| DSB | GLIDE |
| BFQ | HEADBOARD |
| CLW | INTERIOR |
| DSP | LADDER |
| BFC | LEFT BOTTOM |
| BGR | LEFT BOTTOM TO TOP |
| BGD | LEFT CENTER SIDE |
| BDL | LEFT END |
| ACH | LEFT FRONT |
| DYJ | LEFT PEDESTAL |
| AWN | LEFT REAR |
| ACF | LEFT SIDE |
| DEL | LEG |
| DYY | MIRROR |
| DYL | MODESTY PANEL |
| AAB | OVERALL |
| BFR | OVERALL EXCEPT BASE |
| BFS | OVERALL EXCEPT CUSHION |
| DSC | OVERALL EXCEPT DOOR |
| DYM | OVERALL EXCEPT DOOR FRONT |
| DSL | OVERALL EXCEPT FRAME |
| DSM | OVERALL EXCEPT GLIDE |
| DYN | OVERALL EXCEPT MODESTY PANEL |
| BFT | OVERALL EXCEPT SEAT |
| DYW | OVERALL EXCEPT SHOE |
| DXP | OVERALL EXCEPT SMALL DRAWER FRONT COVERING |
| DSN | OVERALL EXCEPT SPRING |
| BFW | OVERALL EXCEPT TOP |
| BFX | OVERALL EXCEPT TOP COVERING |
| DTD | OVERALL EXCEPT TOP DOOR |
| DYF | OVERALL EXCEPT TOP INSET |
| AGZ | PADDING |
| DRS | PEDESTAL |
| DSX | PEDESTAL COLUMN |
| DYB | PEDESTAL TUBE |
| DPF | PIVOT |
| DEQ | POST |
| BFY | RACK |
| DSQ | RAIL |
| BFD | RIGHT BOTTOM |
| BGS | RIGHT BOTTOM TO TOP |
| BGE | RIGHT CENTER SIDE |
| BFM | RIGHT END |
| ACP | RIGHT FRONT |
| DYH | RIGHT PEDESTAL |
| AWQ | RIGHT REAR |
| ACR | RIGHT SIDE |
| ACA | SEAT |
| BFZ | SEAT COVERING |
| DYQ | SEAT COVERING EXCEPT FACE PANEL |
| DSA | SEAT CUSHION COVERING |
| DRW | SEAT CUSHION PADDING |
| DYR | SEAT FACE PANEL |
| DSR | SEAT FRAME |
| BGA | SEAT PADDING |
| DSW | SEAT RIM |
| DRY | SEAT STRAP |
| DXT | SEAT TOP |
| BGB | SHELF |
| AMB | SHELL |
| BGC | SHOE |
| DYT | SHOE MOUNT |
| ACZ | SIDE |
| DYE | SIDE FRAME |
| BGF | SIDE TO SIDE |
| BFE | SIDE TO SIDE BOTTOM |
| BFH | SIDE TO SIDE CENTER |
| BGL | SIDE TO SIDE TOP |
| DYX | SMALL DRAWER FRONT |
| DXN | SMALL DRAWER FRONT COVERING |
| DME | SPINDLE |
| ALH | SPRING |
| AHB | STRAP |
| DXY | STRETCHER |
| DSS | TABLE FRAME |
| BGG | TABLET ARM |
| ABD | TOP |
| AQK | TOP CENTER |
| BGH | TOP COVERING |
| DXR | TOP INSERT |
| BGJ | TOP LEFT |
| BHZ | TOP LEFT SIDE |
| BGK | TOP RIGHT |
| AER | TOP RIGHT SIDE |
| AHD | TUBE |
| BGM | UNDER THE SEAT |
| BGN | UNDER THE TOP |
| BGP | UPHOLSTERY |
| BGQ | UPHOLSTERY PADDING |
| DXQ | WORK SURFACE |
| Table 2 |
| Reply Code (AF62) | Reply |
| B | NONREVERSIBLE |
| C | REVERSIBLE |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDGV)
| Table 1 |
| Reply Code (EN02) | Reply |
| GV | COMPREHENSIVE PROCUREMENT GUIDELINE - PARK AND RECREATION PRODUCTS - PARK BENCHES AND PICNIC TABLES |
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCF2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CF | CUBIC FEET |
AFJN*DFRAGILITY FACTOR
THE MEASURE OF SENSITIVITY OF THE ITEM TO BE PACKAGED. A FACTOR USED BY PACKAGING ENGINEERS IN DEVISING PROPER CUSHIONING IN A PACKAGE.
Enter the applicable reply code from the table below
(AFJNDD)
| Table 1 |
| Reply Code (AD40) | Reply |
| D | DELICATE |
| B | EXTREMELY FRAGILE |
| E | MODERATELY DELICATE |
| F | MODERATELY RUGGED |
| G | RUGGED |
| C | VERY DELICATE |
BBRG*DSTORAGE TYPE
INDICATES THE TYPE OF STORAGE SPACE REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(BBRGDAD*;BBRGDAN$DAM*;BBRGDAN$$DAM*)
| Table 1 |
| Reply Code (AM81) | Reply |
| AC | CLOSED SHED |
| AD | CONTROLLED HUMIDITY WAREHOUSE |
| AM | DEHUMIDIFIED WAREHOUSE |
| AT | DOCK LEVEL HEATED WAREHOUSE |
| AX | DOCK LEVEL UNHEATED WAREHOUSE |
| AE | GENERAL PURPOSE WAREHOUSE |
| AS | GROUND LEVEL HEATED WAREHOUSE |
| AW | GROUND LEVEL UNHEATED WAREHOUSE |
| AN | HEATED WAREHOUSE |
ALBY*DUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter the applicable reply code from the table below
(ALBYDABC*;ALBYDABL$DAJQ*;ALBYDABL$$DAJQ*)
| Table 1 |
| Reply Code (AH21) | Reply |
| AJQ | HOUSEHOLD |
| ABL | OFFICE |
| ABC | SHIPBOARD |
AFJQ*JSTORAGE TEMP RANGE
THE MINIMUM AND MAXIMUM TEMPERATURES AT WHICH AN ITEM CAN BE STORED WITHOUT DETRIMENTAL EFFECT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFJQJFM32.0/P50.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(ZZZPJ81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABE | BASE |
| 3AEE | OVERALL |
| 3BAU | SEAT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information