An instrument primarily designed for the quantitative determination of metallic elements in solution by electrolysis.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED10948*)
CYFZGTEST SAMPLE/SPECIMEN SIZE
THE AMOUNT,MASS,VOLUME,ETC.,OF A SAMPLE/SPECIMEN NEEDED BY THE ITEM TO RUN A COMPLETE ASSAY/TEST.
Enter clear text.
(CYFZGCLEARTEXT)
CYHMGTEST SAMPLE/SPECIMEN TYPE
INDICATES THE TYPE OF SAMPLE/SPECIMEN THE ITEM IS CAPABLE OF ASCERTAINING QUALITATIVE AND/OR QUANTITATIVE ASSAY DETERMINATIONS.
Enter clear text.
(CYHMGCLEARTEXT)
CBBLDFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDDTR*;CBBLDDTY$$DDTT*)
| Table 1 |
| Reply Code (AN47) | Reply |
| DTM | ALPHA-NUMERIC KEYPAD |
| DTP | BATCH PROCESSING |
| DTQ | COMPUTER MONITOR |
| DTR | DATA ENTRY KEYBOARD |
| DTS | DIGITAL DISPLAY SCREEN |
| DTT | DISCRETE PROCESSING |
| DTN | EXTERNAL AUTOSAMPLER |
| DTX | EXTERNAL PRINTER |
| DTU | INTEGRAL AUTOSAMPLING SYSTEM |
| DTV | INTEGRAL CENTRIFUGE |
| DTW | INTEGRAL PRINTER |
| DTY | RS232 PORT |
| DPR | SELF-CALIBRATION |
| DTZ | SHAKING DEVICE |
| DUA | STAT PROCESSING |
IF STYLE/REPLY CODE(s) AAB, AAE, AAK, AAL OR AAP WERE ENTERED FOR MRC CYFV, YOU MUST ANSWER MRC (CYFX)
IF STYLE/REPLY CODE(s) AAD, AAF, AAH, AAJ, AAM OR AAN WERE ENTERED FOR MRC CYFV, YOU MUST ANSWER MRC (BMMK and CYFW)
CYFVDMETHOD OF ANALYSIS
THE METHOD BY WHICH AN INSTRUMENT PERFORMS THE ACTUAL ASSAY(S) OF A SAMPLE/SPECIMEN.
Enter the applicable reply code from the table below
(CYFVDAAL*;CYFVDAAD$DAAF*;CYFVDAAD$$DAAF*)
| Table 1 |
| Reply Code (AP77) | Reply |
| AAB | AMPEROMETRIC |
| AAC | CHROMATOGRAPHIC |
| AAD | COLORIMETRIC |
| AAE | ELECTROGRAVIMETRIC |
| AAJ | FLAME PHOTOMETRIC |
| AAF | FLUOROMETRIC |
| AAG | KINETIC ENZYME/RATE TEST |
| AAH | PHOTOMETRIC |
| AAK | POLAROGRAPHIC |
| AAL | POTENTIOMETRIC/ION SELECTIVE ELECTRODE |
| AAM | SPECTROMETRIC |
| AAN | SPECTROPHOTOMETRIC |
| AAR | SPECTROSCOPIC |
| AAP | VOLTAMMETRIC |
| AAQ | VOLUMETRIC |
BMMK*JWAVELENGTH RANGE
AN INDICATION OF THE WAVELENGTH MINIMUM AND MAXIMUM LIMITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(BMMKJEM32.0/P50.0*)
| Table 1 |
| Reply Code (AD75) | Reply |
| E | ANGSTROMS |
| M | MICRONS |
| L | MILLIMICRONS |
| N | NANOMETERS |
CYFW*DWAVELENGTH RANGE DATA NON-AVAILABILITY
THE REASON FOR OMITTING THE WAVELENGTH RANGE DATA.
Enter the applicable reply code from the table below
(CYFWDAWB)
| Table 1 |
| Reply Code (AP78) | Reply |
| AWA | NOT INCLUDED AS AN ESSENTIAL CHARACTERISTIC IN THE SPECIFICATION/CID COVERING THIS STANDARD NSN |
| AWB | NOT OBTAINABLE FROM THE MANUFACTURER |
CYFX*DELECTRODE TYPE
INDICATES THE TYPE OF ELECTRODE(S) EMPLOYED IN THE ITEM TO PRODUCE A SPECIFIC ION ASSAY OF A SAMPLE/SPECIMEN.
Enter the applicable reply code from the table below
(CYFXDAAP*;CYFXDAAS$DAAB*;CYFXDAAS$$DAAB*)
| Table 1 |
| Reply Code (AF45) | Reply |
| AAB | CALCIUM/CA++ |
| AAC | CARBON DIOXIDE/CO2 |
| AAD | CHLORIDE/CL- |
| AAE | COUNTER |
| AAF | DROPPING MERCURY |
| AAG | FLUORIDE/F- |
| AAJ | MERCURY POOL |
| AAS | NOT INCLUDED AS AN ESSENTIAL CHARACTERISTIC IN THE SPECIFICATION/CID COVERING THIS STANDARD NSN |
| AAK | PARTIAL CARBON DIOXIDE/PCO2 |
| AAL | PARTIAL OXYGEN/PO2 |
| AAH | PH |
| AAM | POTASSIUM/K+ |
| AAN | REFERENCE |
| AAP | SODIUM/NA+ |
| AAQ | TOTAL CARBON DIOXIDE/TC02 |
| AAR | WORKING |
APYE*DDETECTOR TYPE
INDICATES THE SPECIFIC TYPE OF DETECTOR INCLUDED.
Enter the applicable reply code from the table below
(APYEDGY*;APYEDGZ$DGU*;APYEDGZ$$DGU*)
| Table 1 |
| Reply Code (AK80) | Reply |
| GP | DIODE ARRAY |
| GQ | DISCHARGE IONIZATION |
| GR | FLAME IONIZATION |
| GS | FLAME PHOTOMETRIC |
| GT | PHOTODIODE |
| GU | PHOTOIONIZATION |
| GV | PHOTOMULTIPLIER |
| GW | PHOTOTUBE |
| GZ | PYROELECTRIC |
| GX | SILICON SOLID STATE |
| GY | THERMAL CONDUCTIVITY |
AQXY*GTEST TYPE FOR WHICH DESIGNED
INDICATES THE TYPE OF TEST FOR WHICH THE ITEM IS DESIGNED.
Enter clear text.
(AQXYGCLEARTEXT)
CYFY*GANALYSIS TEST/MEASUREMENT RANGE
THE BUILT IN TESTING RANGE FOR EACH TYPE OF TEST/ASSAY THAT THE ANALYTICAL INSTRUMENT IS CAPABLE OF PERFORMING.
Enter clear text.
(CYFYGCLEARTEXT)
CYGD*JTHROUGHPUT PER HOUR
THE NUMBER OF SAMPLES/SPECIMENS OR ASSAYS (TEST RESULTS) THAT THE ITEM IS CAPABLE OF PROCESSING IN ONE HOUR.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(CYGDJAAC2*;CYGDJAAC2$$JAAC3*;CYGDJAAC2$JAAC2*)
| Table 1 |
| Reply Code (AP79) | Reply |
| AAB | ASSAYS/TESTS MAXIMUM |
| AAC | ASSAYS/TESTS MINIMUM |
| AAD | ASSAYS/TESTS NOMINAL |
| AAE | END POINT ASSAYS |
| AAF | FLUORESCENT IMMUNOASSAYS |
| AAG | ISE/POTENTIOMETRIC ASSAYS |
| AAH | KINETIC ASSAYS |
| AAJ | PLASMA SAMPLES |
| AAK | RADIOIMMUNOASSAYS |
| AAL | SAMPLES/SPECIMENS MAXIMUM |
| AAM | SAMPLES/SPECIMENS MINIMUM |
| AAN | SAMPLES/SPECIMENS NOMINAL |
| AAP | SERUM SAMPLES |
| AAR | URINE SAMPLES |
| AAQ | WHOLE BLOOD SAMPLES |
CYGB*DTEST SAMPLE/SPECIMEN HOLDING DEVICE
A DESIGNATED ITEM OR CONTAINER WHERE THE TEST SAMPLES/SPECIMENS ARE HELD IN OR ON THE ITEM.
Enter the applicable reply code from the table below
(CYGBDAAF*;CYGBDAAJ$$DAAP*)
| Table 1 |
| Reply Code (AP80) | Reply |
| AAK | BOTTLES/VIALS |
| AAB | CUVETTE STRIP, CONTINUOUS FEED |
| AAD | CUVETTE TRAY, ROTATING |
| AAC | CUVETTE-SAMPLE-REAGENT TRAY, ROTATING |
| AAE | ELECTROLYSIS VESSEL |
| AAL | REAGENT SLIDE, DRY |
| AAM | REAGENT STRIP, DRY |
| AAQ | REAGENT TABLET DISPENSER |
| AAN | REAGENT TRAY, ROTATING |
| AAP | REAGENT TRAY, STATIONARY |
| AAR | REAGENT TUBE |
| AAF | SAMPLE TRAY, ROTATING |
| AAG | SAMPLE TRAY, STATIONARY |
| AAH | TEST PACK |
| AAJ | TUBE, SAMPLE/SPECIMEN |
CYGC*DREAGENT/DILUENT HOLDING DEVICE
A DESIGNATED ITEM OR CONTAINER WHERE THE REAGENTS/DILUENTS ARE HELD IN OR ON THE ITEM.
Enter the applicable reply code from the table below
(CYGCDAAL*;CYGCDAAB$$DAAR*)
| Table 1 |
| Reply Code (AP80) | Reply |
| AAK | BOTTLES/VIALS |
| AAB | CUVETTE STRIP, CONTINUOUS FEED |
| AAD | CUVETTE TRAY, ROTATING |
| AAC | CUVETTE-SAMPLE-REAGENT TRAY, ROTATING |
| AAE | ELECTROLYSIS VESSEL |
| AAL | REAGENT SLIDE, DRY |
| AAM | REAGENT STRIP, DRY |
| AAQ | REAGENT TABLET DISPENSER |
| AAN | REAGENT TRAY, ROTATING |
| AAP | REAGENT TRAY, STATIONARY |
| AAR | REAGENT TUBE |
| AAF | SAMPLE TRAY, ROTATING |
| AAG | SAMPLE TRAY, STATIONARY |
| AAH | TEST PACK |
| AAJ | TUBE, SAMPLE/SPECIMEN |
CYGE*DTEST SAMPLE/SPECIMEN DELIVERY DEVICE
A MEANS BY WHICH A SAMPLE/SPECIMEN IS INTRODUCED INTO THE ANALYTICAL AREA OF AN ITEM.
Enter the applicable reply code from the table below
(CYGEDAAD*;CYGEDAAB$DAAE*;CYGEDAAB$$DAAE*)
| Table 1 |
| Reply Code (AP81) | Reply |
| AAB | NEEDLE/PROBE, ANALYZER ASPIRATION SYSTEM |
| AAC | PIPET, HANDHELD AUTOMATIC |
| AAD | PIPET, HANDHELD MANUAL |
| AAE | SYRINGE, LABORATORY |
| AAF | TUBE, CAPILLARY |
ACDC*DCURRENT TYPE
INDICATES THE TYPE OF CURRENT WHETHER ALTERNATING,DIRECT,OR BOTH.
Enter the applicable reply code from the table below
(ACDCDD*;ACDCDC$DB*)
| Table 1 |
| Reply Code (AB62) | Reply |
| B | AC |
| D | AC/DC |
| C | DC |
ELEC*BVOLTAGE IN VOLTS
THE TOTAL ELECTRICAL VOLTAGE.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ELECB2.0*;ELECB2.0$BM2.0;ELECB2.0$$BM2.0*)
ACZB*JFREQUENCY RATING
THE NUMBER OF COMPLETE CYCLIC CHANGES,PER UNIT OF TIME,FOR WHICH AN ITEM IS RATED.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACZBJMB2.0*;ACZBJMB2.0$JMB2.0*;ACZBJMB2.0$$JMB2.1*)
| Table 1 |
| Reply Code (AC32) | Reply |
| E | HERTZ |
| M | MEGAHERTZ |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABRN*JHEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN OBJECT,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRNJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
WDTH*JWIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(WDTHJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
DPTH*JDEPTH
A MEASUREMENT BETWEEN SPECIFIED POINTS ON AN ITEM, IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(DPTHJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AKYD*GACCESSORY COMPONENTS AND QUANTITY
THE NAME AND NUMBER OF PARTS SUPPLIED WITH THE ITEM WHICH MAY BE REQUIRED FOR APPLICATION.
Enter clear text.
(AKYDGCLEARTEXT)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information