ISAC Reply 3AEE added to MRC ACQW.
ISAC Reply 3DRN added to MRC ACQW.
ISAC Reply 3DRO added to MRC ACQW.
ISAC Reply 3DRP added to MRC ACQW.
ISAC Reply 3HIS added to MRC ACQW.
ISAC Reply 3HIT added to MRC ACQW.
ISAC Reply 3HIU added to MRC ACQW.
ISAC Reply 3HIV added to MRC ACQW.
ISAC Reply 3HIW added to MRC ACQW.
ISAC Reply 3HOU added to MRC ACQW.
ISAC Reply 1A deleted from MRC ACQW.
ISAC Reply 1B deleted from MRC ACQW.
ISAC Reply 1C deleted from MRC ACQW.
ISAC Reply 1D deleted from MRC ACQW.
ISAC Reply 1E deleted from MRC ACQW.
ISAC Reply 1F deleted from MRC ACQW.
ISAC Reply 1G deleted from MRC ACQW.
ISAC Reply 1H deleted from MRC ACQW.
ISAC Reply 1J deleted from MRC ACQW.
ISAC Reply 1K deleted from MRC ACQW.
ISAC Reply 1L deleted from MRC ACQW.
ISAC Reply 1M deleted from MRC ACQW.
ISAC Reply 1N deleted from MRC ACQW.
ISAC Reply 1P deleted from MRC ACQW.
ISAC Reply 3AEE added to MRC ARNJ.
ISAC Reply 3DRN added to MRC ARNJ.
ISAC Reply 3DRO added to MRC ARNJ.
ISAC Reply 3DRP added to MRC ARNJ.
ISAC Reply 3HIS added to MRC ARNJ.
ISAC Reply 3HIV added to MRC ARNJ.
ISAC Reply 3HIW added to MRC ARNJ.
ISAC Reply 3HOU added to MRC ARNJ.
ISAC Reply 1A deleted from MRC ARNJ.
ISAC Reply 1B deleted from MRC ARNJ.
ISAC Reply 1C deleted from MRC ARNJ.
ISAC Reply 1D deleted from MRC ARNJ.
ISAC Reply 1E deleted from MRC ARNJ.
ISAC Reply 1F deleted from MRC ARNJ.
ISAC Reply 1G deleted from MRC ARNJ.
ISAC Reply 1H deleted from MRC ARNJ.
ISAC Reply 1J deleted from MRC ARNJ.
ISAC Reply 1K deleted from MRC ARNJ.
ISAC Reply 1L deleted from MRC ARNJ.
ISAC Reply 1M deleted from MRC ARNJ.
ISAC Reply 1N deleted from MRC ARNJ.
ISAC Reply 1P deleted from MRC ARNJ.
ISAC Reply 3AEE added to MRC ARNK.
ISAC Reply 3DRN added to MRC ARNK.
ISAC Reply 3DRO added to MRC ARNK.
ISAC Reply 3DRP added to MRC ARNK.
ISAC Reply 3HIS added to MRC ARNK.
ISAC Reply 3HIT added to MRC ARNK.
ISAC Reply 3HIU added to MRC ARNK.
ISAC Reply 3HIW added to MRC ARNK.
ISAC Reply 3HOU added to MRC ARNK.
ISAC Reply 1A deleted from MRC ARNK.
ISAC Reply 1B deleted from MRC ARNK.
ISAC Reply 1C deleted from MRC ARNK.
ISAC Reply 1D deleted from MRC ARNK.
ISAC Reply 1E deleted from MRC ARNK.
ISAC Reply 1F deleted from MRC ARNK.
ISAC Reply 1G deleted from MRC ARNK.
ISAC Reply 1H deleted from MRC ARNK.
ISAC Reply 1J deleted from MRC ARNK.
ISAC Reply 1K deleted from MRC ARNK.
ISAC Reply 1L deleted from MRC ARNK.
ISAC Reply 1M deleted from MRC ARNK.
ISAC Reply 1N deleted from MRC ARNK.
ISAC Reply 1P deleted from MRC ARNK.
ISAC Reply 3AEE added to MRC ARNW.
ISAC Reply 3DRN added to MRC ARNW.
ISAC Reply 3HOU added to MRC ARNW.
ISAC Reply 1A deleted from MRC ARNW.
ISAC Reply 1B deleted from MRC ARNW.
ISAC Reply 1C deleted from MRC ARNW.
ISAC Reply 1D deleted from MRC ARNW.
ISAC Reply 1E deleted from MRC ARNW.
ISAC Reply 1F deleted from MRC ARNW.
ISAC Reply 1G deleted from MRC ARNW.
ISAC Reply 1H deleted from MRC ARNW.
ISAC Reply 1J deleted from MRC ARNW.
ISAC Reply 1K deleted from MRC ARNW.
ISAC Reply 1L deleted from MRC ARNW.
ISAC Reply 1M deleted from MRC ARNW.
ISAC Reply 1N deleted from MRC ARNW.
ISAC Reply 1P deleted from MRC ARNW.
ISAC Reply 3AEE added to MRC ARNX.
ISAC Reply 3DRN added to MRC ARNX.
ISAC Reply 3HOU added to MRC ARNX.
ISAC Reply 1A deleted from MRC ARNX.
ISAC Reply 1B deleted from MRC ARNX.
ISAC Reply 1C deleted from MRC ARNX.
ISAC Reply 1D deleted from MRC ARNX.
ISAC Reply 1E deleted from MRC ARNX.
ISAC Reply 1F deleted from MRC ARNX.
ISAC Reply 1G deleted from MRC ARNX.
ISAC Reply 1H deleted from MRC ARNX.
ISAC Reply 1J deleted from MRC ARNX.
ISAC Reply 1K deleted from MRC ARNX.
ISAC Reply 1L deleted from MRC ARNX.
ISAC Reply 1M deleted from MRC ARNX.
ISAC Reply 1N deleted from MRC ARNX.
ISAC Reply 1P deleted from MRC ARNX.
ISAC Reply 3AEE added to MRC ARSP.
ISAC Reply 3DRN added to MRC ARSP.
ISAC Reply 3HOU added to MRC ARSP.
ISAC Reply 1A deleted from MRC ARSP.
ISAC Reply 1B deleted from MRC ARSP.
ISAC Reply 1C deleted from MRC ARSP.
ISAC Reply 1D deleted from MRC ARSP.
ISAC Reply 1E deleted from MRC ARSP.
ISAC Reply 1F deleted from MRC ARSP.
ISAC Reply 1G deleted from MRC ARSP.
ISAC Reply 1H deleted from MRC ARSP.
ISAC Reply 1J deleted from MRC ARSP.
ISAC Reply 1K deleted from MRC ARSP.
ISAC Reply 1L deleted from MRC ARSP.
ISAC Reply 1M deleted from MRC ARSP.
ISAC Reply 1N deleted from MRC ARSP.
ISAC Reply 1P deleted from MRC ARSP.
ISAC Reply 3AEE added to MRC ARSQ.
ISAC Reply 3DRN added to MRC ARSQ.
ISAC Reply 3DRO added to MRC ARSQ.
ISAC Reply 3DRP added to MRC ARSQ.
ISAC Reply 3HIS added to MRC ARSQ.
ISAC Reply 3HIT added to MRC ARSQ.
ISAC Reply 3HIW added to MRC ARSQ.
ISAC Reply 3HOU added to MRC ARSQ.
ISAC Reply 1A deleted from MRC ARSQ.
ISAC Reply 1B deleted from MRC ARSQ.
ISAC Reply 1C deleted from MRC ARSQ.
ISAC Reply 1D deleted from MRC ARSQ.
ISAC Reply 1E deleted from MRC ARSQ.
ISAC Reply 1F deleted from MRC ARSQ.
ISAC Reply 1G deleted from MRC ARSQ.
ISAC Reply 1H deleted from MRC ARSQ.
ISAC Reply 1J deleted from MRC ARSQ.
ISAC Reply 1K deleted from MRC ARSQ.
ISAC Reply 1L deleted from MRC ARSQ.
ISAC Reply 1M deleted from MRC ARSQ.
ISAC Reply 1N deleted from MRC ARSQ.
ISAC Reply 1P deleted from MRC ARSQ.
ISAC Reply 3AEE added to MRC ARTE.
ISAC Reply 3DRN added to MRC ARTE.
ISAC Reply 3DRO added to MRC ARTE.
ISAC Reply 3DRP added to MRC ARTE.
ISAC Reply 3HIS added to MRC ARTE.
ISAC Reply 3HIW added to MRC ARTE.
ISAC Reply 3HOU added to MRC ARTE.
ISAC Reply 1A deleted from MRC ARTE.
ISAC Reply 1B deleted from MRC ARTE.
ISAC Reply 1C deleted from MRC ARTE.
ISAC Reply 1D deleted from MRC ARTE.
ISAC Reply 1E deleted from MRC ARTE.
ISAC Reply 1F deleted from MRC ARTE.
ISAC Reply 1G deleted from MRC ARTE.
ISAC Reply 1H deleted from MRC ARTE.
ISAC Reply 1J deleted from MRC ARTE.
ISAC Reply 1K deleted from MRC ARTE.
ISAC Reply 1L deleted from MRC ARTE.
ISAC Reply 1M deleted from MRC ARTE.
ISAC Reply 1N deleted from MRC ARTE.
ISAC Reply 1P deleted from MRC ARTE.
ISAC Reply 3AEE added to MRC ARNL.
ISAC Reply 3DRN added to MRC ARNL.
ISAC Reply 3DRO added to MRC ARNL.
ISAC Reply 3DRP added to MRC ARNL.
ISAC Reply 3HIS added to MRC ARNL.
ISAC Reply 3HIT added to MRC ARNL.
ISAC Reply 3HIU added to MRC ARNL.
ISAC Reply 3HIW added to MRC ARNL.
ISAC Reply 3HOU added to MRC ARNL.
ISAC Reply 1A deleted from MRC ARNL.
ISAC Reply 1B deleted from MRC ARNL.
ISAC Reply 1C deleted from MRC ARNL.
ISAC Reply 1D deleted from MRC ARNL.
ISAC Reply 1E deleted from MRC ARNL.
ISAC Reply 1F deleted from MRC ARNL.
ISAC Reply 1G deleted from MRC ARNL.
ISAC Reply 1H deleted from MRC ARNL.
ISAC Reply 1J deleted from MRC ARNL.
ISAC Reply 1K deleted from MRC ARNL.
ISAC Reply 1L deleted from MRC ARNL.
ISAC Reply 1M deleted from MRC ARNL.
ISAC Reply 1N deleted from MRC ARNL.
ISAC Reply 1P deleted from MRC ARNL.
ISAC Reply 3AEE added to MRC ARNM.
ISAC Reply 3DRN added to MRC ARNM.
ISAC Reply 3DRO added to MRC ARNM.
ISAC Reply 3DRP added to MRC ARNM.
ISAC Reply 3HIS added to MRC ARNM.
ISAC Reply 3HIW added to MRC ARNM.
ISAC Reply 3HOU added to MRC ARNM.
ISAC Reply 1A deleted from MRC ARNM.
ISAC Reply 1B deleted from MRC ARNM.
ISAC Reply 1C deleted from MRC ARNM.
ISAC Reply 1D deleted from MRC ARNM.
ISAC Reply 1E deleted from MRC ARNM.
ISAC Reply 1F deleted from MRC ARNM.
ISAC Reply 1G deleted from MRC ARNM.
ISAC Reply 1H deleted from MRC ARNM.
ISAC Reply 1J deleted from MRC ARNM.
ISAC Reply 1K deleted from MRC ARNM.
ISAC Reply 1L deleted from MRC ARNM.
ISAC Reply 1M deleted from MRC ARNM.
ISAC Reply 1N deleted from MRC ARNM.
ISAC Reply 1P deleted from MRC ARNM.
ISAC Reply 3AEE added to MRC ARNN.
ISAC Reply 3DRN added to MRC ARNN.
ISAC Reply 3DRO added to MRC ARNN.
ISAC Reply 3DRP added to MRC ARNN.
ISAC Reply 3HIS added to MRC ARNN.
ISAC Reply 3HIW added to MRC ARNN.
ISAC Reply 3HOU added to MRC ARNN.
ISAC Reply 1A deleted from MRC ARNN.
ISAC Reply 1B deleted from MRC ARNN.
ISAC Reply 1C deleted from MRC ARNN.
ISAC Reply 1D deleted from MRC ARNN.
ISAC Reply 1E deleted from MRC ARNN.
ISAC Reply 1F deleted from MRC ARNN.
ISAC Reply 1G deleted from MRC ARNN.
ISAC Reply 1H deleted from MRC ARNN.
ISAC Reply 1J deleted from MRC ARNN.
ISAC Reply 1K deleted from MRC ARNN.
ISAC Reply 1L deleted from MRC ARNN.
ISAC Reply 1M deleted from MRC ARNN.
ISAC Reply 1N deleted from MRC ARNN.
ISAC Reply 1P deleted from MRC ARNN.
ISAC Reply 3AEE added to MRC ARNP.
ISAC Reply 3DRN added to MRC ARNP.
ISAC Reply 3HOU added to MRC ARNP.
ISAC Reply 1A deleted from MRC ARNP.
ISAC Reply 1B deleted from MRC ARNP.
ISAC Reply 1C deleted from MRC ARNP.
ISAC Reply 1D deleted from MRC ARNP.
ISAC Reply 1E deleted from MRC ARNP.
ISAC Reply 1F deleted from MRC ARNP.
ISAC Reply 1G deleted from MRC ARNP.
ISAC Reply 1H deleted from MRC ARNP.
ISAC Reply 1J deleted from MRC ARNP.
ISAC Reply 1K deleted from MRC ARNP.
ISAC Reply 1L deleted from MRC ARNP.
ISAC Reply 1M deleted from MRC ARNP.
ISAC Reply 1N deleted from MRC ARNP.
ISAC Reply 1P deleted from MRC ARNP.
ISAC Reply 3AEE added to MRC ARNR.
ISAC Reply 3DRN added to MRC ARNR.
ISAC Reply 3HOU added to MRC ARNR.
ISAC Reply 1A deleted from MRC ARNR.
ISAC Reply 1B deleted from MRC ARNR.
ISAC Reply 1C deleted from MRC ARNR.
ISAC Reply 1D deleted from MRC ARNR.
ISAC Reply 1E deleted from MRC ARNR.
ISAC Reply 1F deleted from MRC ARNR.
ISAC Reply 1G deleted from MRC ARNR.
ISAC Reply 1H deleted from MRC ARNR.
ISAC Reply 1J deleted from MRC ARNR.
ISAC Reply 1K deleted from MRC ARNR.
ISAC Reply 1L deleted from MRC ARNR.
ISAC Reply 1M deleted from MRC ARNR.
ISAC Reply 1N deleted from MRC ARNR.
ISAC Reply 1P deleted from MRC ARNR.
ISAC Reply 3AEE added to MRC ARNS.
ISAC Reply 3DRN added to MRC ARNS.
ISAC Reply 3HOU added to MRC ARNS.
ISAC Reply 1A deleted from MRC ARNS.
ISAC Reply 1B deleted from MRC ARNS.
ISAC Reply 1C deleted from MRC ARNS.
ISAC Reply 1D deleted from MRC ARNS.
ISAC Reply 1E deleted from MRC ARNS.
ISAC Reply 1F deleted from MRC ARNS.
ISAC Reply 1G deleted from MRC ARNS.
ISAC Reply 1H deleted from MRC ARNS.
ISAC Reply 1J deleted from MRC ARNS.
ISAC Reply 1K deleted from MRC ARNS.
ISAC Reply 1L deleted from MRC ARNS.
ISAC Reply 1M deleted from MRC ARNS.
ISAC Reply 1N deleted from MRC ARNS.
ISAC Reply 1P deleted from MRC ARNS.
ISAC Reply 3AEE added to MRC ARTF.
ISAC Reply 3DRN added to MRC ARTF.
ISAC Reply 3HIW added to MRC ARTF.
ISAC Reply 3HOU added to MRC ARTF.
ISAC Reply 1A deleted from MRC ARTF.
ISAC Reply 1B deleted from MRC ARTF.
ISAC Reply 1C deleted from MRC ARTF.
ISAC Reply 1D deleted from MRC ARTF.
ISAC Reply 1E deleted from MRC ARTF.
ISAC Reply 1F deleted from MRC ARTF.
ISAC Reply 1G deleted from MRC ARTF.
ISAC Reply 1H deleted from MRC ARTF.
ISAC Reply 1J deleted from MRC ARTF.
ISAC Reply 1K deleted from MRC ARTF.
ISAC Reply 1L deleted from MRC ARTF.
ISAC Reply 1M deleted from MRC ARTF.
ISAC Reply 1N deleted from MRC ARTF.
ISAC Reply 1P deleted from MRC ARTF.
ISAC Reply 3AEE added to MRC ARTL.
ISAC Reply 3DRN added to MRC ARTL.
ISAC Reply 3HIS added to MRC ARTL.
ISAC Reply 3HOU added to MRC ARTL.
ISAC Reply 3ILG added to MRC ARTL.
ISAC Reply 1A deleted from MRC ARTL.
ISAC Reply 1B deleted from MRC ARTL.
ISAC Reply 1C deleted from MRC ARTL.
ISAC Reply 1D deleted from MRC ARTL.
ISAC Reply 1E deleted from MRC ARTL.
ISAC Reply 1F deleted from MRC ARTL.
ISAC Reply 1G deleted from MRC ARTL.
ISAC Reply 1H deleted from MRC ARTL.
ISAC Reply 1J deleted from MRC ARTL.
ISAC Reply 1Q deleted from MRC ARTL.
ISAC Reply 1R deleted from MRC ARTL.
ISAC Reply 3AEE added to MRC ARTM.
ISAC Reply 3DRN added to MRC ARTM.
ISAC Reply 3HIS added to MRC ARTM.
ISAC Reply 3HOU added to MRC ARTM.
ISAC Reply 3ILG added to MRC ARTM.
ISAC Reply 1A deleted from MRC ARTM.
ISAC Reply 1B deleted from MRC ARTM.
ISAC Reply 1C deleted from MRC ARTM.
ISAC Reply 1D deleted from MRC ARTM.
ISAC Reply 1E deleted from MRC ARTM.
ISAC Reply 1F deleted from MRC ARTM.
ISAC Reply 1G deleted from MRC ARTM.
ISAC Reply 1H deleted from MRC ARTM.
ISAC Reply 1J deleted from MRC ARTM.
ISAC Reply 1Q deleted from MRC ARTM.
ISAC Reply 1R deleted from MRC ARTM.
ISAC Reply 3AEE added to MRC ARTN.
ISAC Reply 3DRN added to MRC ARTN.
ISAC Reply 3HIS added to MRC ARTN.
ISAC Reply 3HOU added to MRC ARTN.
ISAC Reply 3ILG added to MRC ARTN.
ISAC Reply 1A deleted from MRC ARTN.
ISAC Reply 1B deleted from MRC ARTN.
ISAC Reply 1C deleted from MRC ARTN.
ISAC Reply 1D deleted from MRC ARTN.
ISAC Reply 1E deleted from MRC ARTN.
ISAC Reply 1F deleted from MRC ARTN.
ISAC Reply 1G deleted from MRC ARTN.
ISAC Reply 1H deleted from MRC ARTN.
ISAC Reply 1J deleted from MRC ARTN.
ISAC Reply 1Q deleted from MRC ARTN.
ISAC Reply 1R deleted from MRC ARTN.
ISAC Reply 3AEE added to MRC ARTP.
ISAC Reply 3HIS added to MRC ARTP.
ISAC Reply 3HOU added to MRC ARTP.
ISAC Reply 1A deleted from MRC ARTP.
ISAC Reply 1B deleted from MRC ARTP.
ISAC Reply 1C deleted from MRC ARTP.
ISAC Reply 1D deleted from MRC ARTP.
ISAC Reply 1E deleted from MRC ARTP.
ISAC Reply 1F deleted from MRC ARTP.
ISAC Reply 1G deleted from MRC ARTP.
ISAC Reply 1H deleted from MRC ARTP.
ISAC Reply 1J deleted from MRC ARTP.
ISAC Reply 1Q deleted from MRC ARTP.
ISAC Reply 1R deleted from MRC ARTP.
ISAC Reply 3AEE added to MRC ARTR.
ISAC Reply 3HIS added to MRC ARTR.
ISAC Reply 3HOU added to MRC ARTR.
ISAC Reply 1A deleted from MRC ARTR.
ISAC Reply 1B deleted from MRC ARTR.
ISAC Reply 1C deleted from MRC ARTR.
ISAC Reply 1D deleted from MRC ARTR.
ISAC Reply 1E deleted from MRC ARTR.
ISAC Reply 1F deleted from MRC ARTR.
ISAC Reply 1G deleted from MRC ARTR.
ISAC Reply 1H deleted from MRC ARTR.
ISAC Reply 1J deleted from MRC ARTR.
ISAC Reply 1Q deleted from MRC ARTR.
ISAC Reply 1R deleted from MRC ARTR.
ISAC Reply 3AEE added to MRC ARTS.
ISAC Reply 3HIS added to MRC ARTS.
ISAC Reply 3HOU added to MRC ARTS.
ISAC Reply 1A deleted from MRC ARTS.
ISAC Reply 1B deleted from MRC ARTS.
ISAC Reply 1C deleted from MRC ARTS.
ISAC Reply 1D deleted from MRC ARTS.
ISAC Reply 1E deleted from MRC ARTS.
ISAC Reply 1F deleted from MRC ARTS.
ISAC Reply 1G deleted from MRC ARTS.
ISAC Reply 1H deleted from MRC ARTS.
ISAC Reply 1J deleted from MRC ARTS.
ISAC Reply 1Q deleted from MRC ARTS.
ISAC Reply 1R deleted from MRC ARTS.
ISAC Reply 3AEE added to MRC ARTT.
ISAC Reply 3HIS added to MRC ARTT.
ISAC Reply 3HOU added to MRC ARTT.
ISAC Reply 1A deleted from MRC ARTT.
ISAC Reply 1B deleted from MRC ARTT.
ISAC Reply 1C deleted from MRC ARTT.
ISAC Reply 1D deleted from MRC ARTT.
ISAC Reply 1E deleted from MRC ARTT.
ISAC Reply 1F deleted from MRC ARTT.
ISAC Reply 1G deleted from MRC ARTT.
ISAC Reply 1H deleted from MRC ARTT.
ISAC Reply 1J deleted from MRC ARTT.
ISAC Reply 1Q deleted from MRC ARTT.
ISAC Reply 1R deleted from MRC ARTT.
ISAC Reply 3AEE added to MRC ARTH.
ISAC Reply 3DRN added to MRC ARTH.
ISAC Reply 3HIS added to MRC ARTH.
ISAC Reply 3HIT added to MRC ARTH.
ISAC Reply 3HOU added to MRC ARTH.
ISAC Reply 3ILG added to MRC ARTH.
ISAC Reply 1A deleted from MRC ARTH.
ISAC Reply 1B deleted from MRC ARTH.
ISAC Reply 1C deleted from MRC ARTH.
ISAC Reply 1D deleted from MRC ARTH.
ISAC Reply 1E deleted from MRC ARTH.
ISAC Reply 1F deleted from MRC ARTH.
ISAC Reply 1G deleted from MRC ARTH.
ISAC Reply 1H deleted from MRC ARTH.
ISAC Reply 1J deleted from MRC ARTH.
ISAC Reply 1Q deleted from MRC ARTH.
ISAC Reply 1R deleted from MRC ARTH.
ISAC Reply 3AEE added to MRC ARTJ.
ISAC Reply 3DRN added to MRC ARTJ.
ISAC Reply 3HIS added to MRC ARTJ.
ISAC Reply 3HOU added to MRC ARTJ.
ISAC Reply 3ILG added to MRC ARTJ.
ISAC Reply 1A deleted from MRC ARTJ.
ISAC Reply 1B deleted from MRC ARTJ.
ISAC Reply 1C deleted from MRC ARTJ.
ISAC Reply 1D deleted from MRC ARTJ.
ISAC Reply 1E deleted from MRC ARTJ.
ISAC Reply 1F deleted from MRC ARTJ.
ISAC Reply 1G deleted from MRC ARTJ.
ISAC Reply 1H deleted from MRC ARTJ.
ISAC Reply 1J deleted from MRC ARTJ.
ISAC Reply 1Q deleted from MRC ARTJ.
ISAC Reply 1R deleted from MRC ARTJ.
ISAC Reply 3AEE added to MRC ARTK.
ISAC Reply 3DRN added to MRC ARTK.
ISAC Reply 3HIS added to MRC ARTK.
ISAC Reply 3HIT added to MRC ARTK.
ISAC Reply 3HOU added to MRC ARTK.
ISAC Reply 3ILG added to MRC ARTK.
ISAC Reply 1A deleted from MRC ARTK.
ISAC Reply 1B deleted from MRC ARTK.
ISAC Reply 1C deleted from MRC ARTK.
ISAC Reply 1D deleted from MRC ARTK.
ISAC Reply 1E deleted from MRC ARTK.
ISAC Reply 1F deleted from MRC ARTK.
ISAC Reply 1G deleted from MRC ARTK.
ISAC Reply 1H deleted from MRC ARTK.
ISAC Reply 1J deleted from MRC ARTK.
ISAC Reply 1Q deleted from MRC ARTK.
ISAC Reply 1R deleted from MRC ARTK.
ISAC Reply 3AEE added to MRC ARTW.
ISAC Reply 3HIS added to MRC ARTW.
ISAC Reply 3HOU added to MRC ARTW.
ISAC Reply 1A deleted from MRC ARTW.
ISAC Reply 1B deleted from MRC ARTW.
ISAC Reply 1C deleted from MRC ARTW.
ISAC Reply 1D deleted from MRC ARTW.
ISAC Reply 1E deleted from MRC ARTW.
ISAC Reply 1F deleted from MRC ARTW.
ISAC Reply 1G deleted from MRC ARTW.
ISAC Reply 1H deleted from MRC ARTW.
ISAC Reply 1J deleted from MRC ARTW.
ISAC Reply 1Q deleted from MRC ARTW.
ISAC Reply 1R deleted from MRC ARTW.
ISAC Reply 3AEE added to MRC ARTX.
ISAC Reply 3HIS added to MRC ARTX.
ISAC Reply 3HOU added to MRC ARTX.
ISAC Reply 1A deleted from MRC ARTX.
ISAC Reply 1B deleted from MRC ARTX.
ISAC Reply 1C deleted from MRC ARTX.
ISAC Reply 1D deleted from MRC ARTX.
ISAC Reply 1E deleted from MRC ARTX.
ISAC Reply 1F deleted from MRC ARTX.
ISAC Reply 1G deleted from MRC ARTX.
ISAC Reply 1H deleted from MRC ARTX.
ISAC Reply 1J deleted from MRC ARTX.
ISAC Reply 1Q deleted from MRC ARTX.
ISAC Reply 1R deleted from MRC ARTX.
ISAC Reply 3AEE added to MRC ARTY.
ISAC Reply 3DRN added to MRC ARTY.
ISAC Reply 3HIS added to MRC ARTY.
ISAC Reply 3HOU added to MRC ARTY.
ISAC Reply 1A deleted from MRC ARTY.
ISAC Reply 1B deleted from MRC ARTY.
ISAC Reply 1C deleted from MRC ARTY.
ISAC Reply 1D deleted from MRC ARTY.
ISAC Reply 1E deleted from MRC ARTY.
ISAC Reply 1F deleted from MRC ARTY.
ISAC Reply 1G deleted from MRC ARTY.
ISAC Reply 1H deleted from MRC ARTY.
ISAC Reply 1J deleted from MRC ARTY.
ISAC Reply 1Q deleted from MRC ARTY.
ISAC Reply 1R deleted from MRC ARTY.
ISAC Reply 3AEE added to MRC ARWA.
ISAC Reply 3DRN added to MRC ARWA.
ISAC Reply 3HIS added to MRC ARWA.
ISAC Reply 3HIT added to MRC ARWA.
ISAC Reply 3HIX added to MRC ARWA.
ISAC Reply 3HOU added to MRC ARWA.
ISAC Reply 3ILG added to MRC ARWA.
ISAC Reply 1A deleted from MRC ARWA.
ISAC Reply 1B deleted from MRC ARWA.
ISAC Reply 1C deleted from MRC ARWA.
ISAC Reply 1D deleted from MRC ARWA.
ISAC Reply 1E deleted from MRC ARWA.
ISAC Reply 1F deleted from MRC ARWA.
ISAC Reply 1G deleted from MRC ARWA.
ISAC Reply 1H deleted from MRC ARWA.
ISAC Reply 1J deleted from MRC ARWA.
ISAC Reply 1Q deleted from MRC ARWA.
ISAC Reply 1R deleted from MRC ARWA.
ISAC Reply 3AEE added to MRC AJLW.
ISAC Reply 3DRN added to MRC AJLW.
ISAC Reply 3HIS added to MRC AJLW.
ISAC Reply 3HIT added to MRC AJLW.
ISAC Reply 3HOU added to MRC AJLW.
ISAC Reply 3ILG added to MRC AJLW.
ISAC Reply 1A deleted from MRC AJLW.
ISAC Reply 1B deleted from MRC AJLW.
ISAC Reply 1C deleted from MRC AJLW.
ISAC Reply 1D deleted from MRC AJLW.
ISAC Reply 1E deleted from MRC AJLW.
ISAC Reply 1F deleted from MRC AJLW.
ISAC Reply 1G deleted from MRC AJLW.
ISAC Reply 1H deleted from MRC AJLW.
ISAC Reply 1J deleted from MRC AJLW.
ISAC Reply 1Q deleted from MRC AJLW.
ISAC Reply 1R deleted from MRC AJLW.
ISAC Reply 3AEE added to MRC ARWC.
ISAC Reply 3DRN added to MRC ARWC.
ISAC Reply 3HIS added to MRC ARWC.
ISAC Reply 3HOU added to MRC ARWC.
ISAC Reply 1A deleted from MRC ARWC.
ISAC Reply 1B deleted from MRC ARWC.
ISAC Reply 1C deleted from MRC ARWC.
ISAC Reply 1D deleted from MRC ARWC.
ISAC Reply 1E deleted from MRC ARWC.
ISAC Reply 1F deleted from MRC ARWC.
ISAC Reply 1G deleted from MRC ARWC.
ISAC Reply 1H deleted from MRC ARWC.
ISAC Reply 1J deleted from MRC ARWC.
ISAC Reply 1Q deleted from MRC ARWC.
ISAC Reply 1R deleted from MRC ARWC.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED10849*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AHYDBND000*;MATT3AHYDBND000$DFBA000*;MATT3AHYDBND000$$DFBA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AHY | INSULATION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL5052 | ALUMINUM ALLOY 5052 |
| AL6061 | ALUMINUM ALLOY 6061 |
| ASA000 | ASBESTOS |
| BND000 | BRONZE |
| CND000 | CARBON ALLOY |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CU0706 | COPPER ALLOY 706 |
| FBA000 | FIBER |
| FG0000 | FIBERGLASS |
| GSA000 | GLASS |
| GSB000 | GLASS FIBER |
| FEA000 | IRON |
| FEB000 | IRON CAST |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| PCA000 | PLASTIC |
| PCN000 | PLASTIC PHENOLIC |
| PCX000 | PLASTIC POLYETHYLENE |
| PCCH00 | PLASTIC POLYIMIDE |
| PCAH00 | PLASTIC POLYURETHANE |
| ZRP000 | POLYURETHANE FOAM |
| RC0007 | RUBBER CHLOROPRENE CLASS CR |
| STA000 | STEEL |
| ZSC000 | STEEL ALLOY |
| ST1995 | STEEL COMP 1.0038 |
| ST0822 | STEEL COMP 1.4301 |
| ST1010 | STEEL COMP 1010 |
| ST1015 | STEEL COMP 1015 |
| ST1017 | STEEL COMP 1017 |
| ST1018 | STEEL COMP 1018 |
| ST0304 | STEEL COMP 304 |
| ST0316 | STEEL COMP 316 |
| ST0321 | STEEL COMP 321 |
| ST0347 | STEEL COMP 347 |
| ST0348 | STEEL COMP 348 |
| ST0410 | STEEL COMP 410 |
| ST0430 | STEEL COMP 430 |
| ST0438 | STEEL COMP S7 |
| STB000 | STEEL CORROSION RESISTING |
| ST0000 | STEEL, CARBON ALLOY, ASTM A563-M, CLASS 10, ZINC PLATED, ASTM B633, TYPE 2, SC3 |
| TTB000 | TITANIUM |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AHY | INSULATION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
IF STYLE/REPLY CODE(s) ADA OR ADC WERE ENTERED FOR MRC APGF, YOU MUST ANSWER MRC (ARNA)
IF STYLE/REPLY CODE(s) ADB WERE ENTERED FOR MRC APGF, YOU MUST ANSWER MRC (MATT)
APGFDDESIGN TYPE
INDICATES THE DESIGN TYPE OF THE ITEM.
Enter the applicable reply code from the table below
(APGFDADB)
| Table 1 |
| Reply Code (AK54) | Reply |
| ADA | DRY |
| BVK | GAS FLOW |
| ADB | JACKETED |
| ADC | WET |
ARNA*DCOOLANT TYPE
INDICATES THE TYPE OF COOLANT USED WITH THE ITEM.
Enter the applicable reply code from the table below
(ARNADAB)
| Table 1 |
| Reply Code (AL57) | Reply |
| AB | AIR |
| AC | WATER |
ARNDDMUFFLER DESIGN
THE BASIC DESIGN OF THE MUFFLER.
Enter the applicable reply code from the table below
(ARNDDAG*;ARNDDAE$$DAH*)
| Table 1 |
| Reply Code (AL58) | Reply |
| AB | BAFFLE |
| AP | BAFFLE W/INTEGRAL SPARK ARRESTOR |
| AC | DIRECTIONAL VANE |
| AD | DIRECTIONAL VANE W/INTEGRAL SPARK ARRESTOR |
| AE | LOUVER |
| AF | MULTIPASS |
| AG | MULTIPASS W/INTEGRAL SPARK ARRESTOR |
| AA | RESONATOR W/PERFORATED SHELL |
| AH | STRAIGHT THROUGH |
| AJ | STRAIGHT THROUGH W/BAFFLE |
IF STYLE/REPLY CODE(s) RD WERE ENTERED FOR MRC ARNG, YOU MUST ANSWER MRC (ABHP and ADAV)
IF STYLE/REPLY CODE(s) BT, RT OR TA WERE ENTERED FOR MRC ARNG, YOU MUST ANSWER MRC (ABHP and ABMK and ABKW)
ARNGDBODY SHAPE
THE PHYSICAL CONFIGURATION OF THE BODY.
Enter the applicable reply code from the table below
(ARNGDAJG)
| Table 1 |
| Reply Code (AD07) | Reply |
| AJG | IRREGULAR |
| BT | OVAL |
| RT | RECTANGULAR |
| RD | ROUND |
| TA | TAPERED |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAC2.0*;ABHPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAA2.0*;ADAVJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAB2.0*;ABMKJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAA2.0*;ABKWJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ARNHDOPERATING POSITION
THE POSITION IN WHICH THE ITEM IS DESIGNED TO OPERATE.
Enter the applicable reply code from the table below
(ARNHDAX*;ARNHDAC$DAB*)
| Table 1 |
| Reply Code (AF63) | Reply |
| AC | HORIZONTAL |
| AX | UNIVERSAL |
| AB | VERTICAL |
IF STYLE/REPLY CODE(s) BG WERE ENTERED FOR MRC ACQW, YOU MUST ANSWER MRC (ARNJ and ARNK and ARNW and ARNX and ACRX and ARSP)
IF STYLE/REPLY CODE(s) BH WERE ENTERED FOR MRC ACQW, YOU MUST ANSWER MRC (ARNJ and ARNK and ARSQ and ARTE)
ACQW*DINLET CONNECTION TYPE
A NARRATIVE DESCRIPTION OF THE TYPE OF INLET CONNECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ACQW3DRODBH*;ACQW3DRODBH$DDS*;ACQW3DRODBH$$DDS*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3DRO | FIRST INLET |
| 3DRP | SECOND INLET |
| 3HIS | FIRST OUTLET |
| 3HIT | SECOND OUTLET |
| 3HIU | THIRD INLET |
| 3HIV | FOURTH INLET |
| 3HIW | ALL INLETS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB76) | Reply |
| BF | FLANGE |
| DS | RECTANGULAR HOLE |
| BG | THREADED |
| BH | UNTHREADED |
ARNJ*GINLET LOCATION
THE LOCATION OF THE INLET.
Enter the applicable ISAC from the table below, followed by the Mode Code and the clear text reply.
(ARNJ3DRNGCLEARTEXT)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3DRO | FIRST INLET |
| 3DRP | SECOND INLET |
| 3HIS | FIRST OUTLET |
| 3HIV | FOURTH INLET |
| 3HIW | ALL INLETS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
ARNK*JINLET PROJECTION LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE INLET PROJECTION,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARNK3DRPJAB2.0*;ARNK3DRPJAB2.0$JAB2.0*;ARNK3DRPJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3DRO | FIRST INLET |
| 3DRP | SECOND INLET |
| 3HIS | FIRST OUTLET |
| 3HIT | SECOND OUTLET |
| 3HIU | THIRD INLET |
| 3HIW | ALL INLETS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ARNW*AINLET THREAD SIZE
DESIGNATES THE THREAD DIAMETER AND QUANTITY OF THREADS PER SPECIFIC MEASUREMENT SCALE.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(ARNW3DRNAP0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
ARNX*DINLET THREAD SERIES DESIGNATOR
A DESIGNATION INDICATING THE DIAMETER-PITCH AND THE NUMBER OF THREADS PER SPECIFIC MEASUREMENT SCALE APPLIED TO A SERIES OF SPECIFIC DIAMETERS OF AN INLET.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ARNX3AEEDBY*;ARNX3AEEDBY$DNT*;ARNX3AEEDBY$$DNT*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH06) | Reply |
| NQ | NEF |
| BY | NF |
| SP | NPS |
| SC | NPSC |
| PM | NPSM |
| NP | NPT |
| NT | NPTF |
| UN | UN |
| FF | UN-12 |
| NC | UNC |
| NF | UNF |
ACRX*DINLET THREAD DIRECTION
THE DIRECTION OF THE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ACRX1JDR)
| Table 1 |
| ISAC Field Indicator (0362) | Location |
| 1A | SINGLE INLET |
| 1B | 1ST OUTLET |
| 1C | 2ND OUTLET |
| 1D | 3RD OUTLET |
| 1E | 4TH OUTLET |
| 1F | 5TH OUTLET |
| 1G | 6TH OUTLET |
| 1H | 7TH OUTLET |
| 1J | 8TH OUTLET |
| 1K | 1ST INLET |
| 1L | 2ND INLET |
| 1M | 3RD INLET |
| 1N | 4TH INLET |
| 1P | ALL INLETS |
| Table 2 |
| Reply Code (AA38) | Reply |
| L | LEFT-HAND |
| R | RIGHT-HAND |
ARSP*DINLET THREAD LOCATION
INDICATES THE LOCATION OF THE THREAD ON THE INLET.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ARSP3AEEDABY*;ARSP3AEEDABY$DABX*;ARSP3AEEDABY$$DABX*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AJ91) | Reply |
| ABY | EXTERNAL |
| ABX | INTERNAL |
ARSQ*JINLET OUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE INLET,WITH TERMINATED POINTS ON THE OUTSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARSQ3HISJAA2.0*;ARSQ3HISJAA2.0$JAA2.0*;ARSQ3HISJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3DRO | FIRST INLET |
| 3DRP | SECOND INLET |
| 3HIS | FIRST OUTLET |
| 3HIT | SECOND OUTLET |
| 3HIW | ALL INLETS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ARTE*JINLET INSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE INLET,WITH TERMINATED POINTS ON THE INSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARTE3DRNJAB2.0*;ARTE3DRNJAB2.0$JAB2.0*;ARTE3DRNJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3DRO | FIRST INLET |
| 3DRP | SECOND INLET |
| 3HIS | FIRST OUTLET |
| 3HIW | ALL INLETS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(SFTTDPCF000*;SFTTDCDA000$DPNB000*;SFTTDCDA000$$DPNB000*)
| Table 1 |
| Reply Code (SF01) | Reply |
| ALB000 | ALUMINUM |
| ALA000 | ALUMINUM ALLOY |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CLB000 | CERAMIC |
| CMA000 | CHROMATE |
| CMB000 | CHROMATE ZINC |
| CRA000 | CHROMIUM |
| ENA000 | ENAMEL |
| ENB000 | ENAMEL LUSTERLESS |
| XXB000 | OXIDE |
| PNA000 | PAINT |
| PNB000 | PAINT HEAT RESISTANT |
| PSA000 | PASSIVATE |
| PCF000 | PLASTIC POLYAMIDE |
| PCAA00 | PLASTIC POLYPROPYLENE |
| ZNA000 | ZINC |
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
ARNF*ATUBE QUANTITY
THE NUMBER OF TUBES INCLUDED ON THE ITEM.
Enter the numeric reply with a minimum of one digit.
(ARNFA10*)
ARNE*ABAFFLE QUANTITY
THE NUMBER OF BAFFLES INCLUDED ON THE ITEM.
Enter the numeric reply with a minimum of one digit.
(ARNEA10*)
ARNL*DINLET FLANGE SHAPE
THE PHYSICAL CONFIGURATION OF THE INLET FLANGE.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ARNL3AEEDTR*;ARNL3AEEDTR$DHF*;ARNL3AEEDTR$$DHF*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3DRO | FIRST INLET |
| 3DRP | SECOND INLET |
| 3HIS | FIRST OUTLET |
| 3HIT | SECOND OUTLET |
| 3HIU | THIRD INLET |
| 3HIW | ALL INLETS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD07) | Reply |
| AEL | ELLIPTICAL |
| BT | OVAL |
| HF | RECTANGLE |
| RD | ROUND |
| SQ | SQUARE |
| TR | TRIANGULAR |
ARNM*JINLET FLANGE MOUNTING PROVISION AND QUANTITY
THE TYPE AND NUMBER OF INLET FLANGE MOUNTING PROVISIONS PROVIDED.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit.
(ARNM3HIWJGY2*;ARNM3HIWJGY2$$JGY3*;ARNM3HIWJGY2$JGY2*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3DRO | FIRST INLET |
| 3DRP | SECOND INLET |
| 3HIS | FIRST OUTLET |
| 3HIW | ALL INLETS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB89) | Reply |
| GY | HOLES |
| GG | STUDS |
ARNN*JINLET FLANGE MOUNTING HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE PASSING THROUGH THE CENTER OF AN INLET FLANGE MOUNTING HOLE,AND TERMINATING AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARNN3DRPJAC2.0*;ARNN3DRPJAC2.0$JAC2.0*;ARNN3DRPJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3DRO | FIRST INLET |
| 3DRP | SECOND INLET |
| 3HIS | FIRST OUTLET |
| 3HIW | ALL INLETS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ARNP*JINLET FLANGE MOUNTING STUD LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN INLET FLANGE MOUNTING STUD,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARNP3AEEJAC2.0*;ARNP3AEEJAC2.0$JAC2.0*;ARNP3AEEJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ARNQ*AINLET FLANGE MOUNTING PROVISION THREAD SIZE
DESIGNATES THE THREAD DIAMETER AND NUMBER OF THREADS PER MEASUREMENT SCALE OF THE INLET FLANGE MOUNTING PROVISION.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(ARNQ1EAI1)
| Table 1 |
| ISAC Field Indicator (0362) | Location |
| 1A | SINGLE INLET |
| 1B | 1ST OUTLET |
| 1C | 2ND OUTLET |
| 1D | 3RD OUTLET |
| 1E | 4TH OUTLET |
| 1F | 5TH OUTLET |
| 1G | 6TH OUTLET |
| 1H | 7TH OUTLET |
| 1J | 8TH OUTLET |
| 1K | 1ST INLET |
| 1L | 2ND INLET |
| 1M | 3RD INLET |
| 1N | 4TH INLET |
| 1P | ALL INLETS |
ARNR*DINLET FLANGE MOUNTING PROVISION THREAD SERIES DESIGNATOR
A DESIGNATION INDICATING THE DIAMETER-PITCH AND THE NUMBER OF THREADS PER MEASUREMENT SCALE APPLIED TO A SERIES OF SPECIFIC DIAMETERS OF AN INLET FLANGE MOUNTING PROVISION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ARNR3AEEDNF*;ARNR3AEEDNF$DNC*;ARNR3AEEDNF$$DNC*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH06) | Reply |
| BX | NC |
| NP | NPT |
| NC | UNC |
| NF | UNF |
ARNS*DINLET FLANGE MOUNTING PROVISION THREAD DIRECTION
THE DIRECTION OF THE INLET FLANGE MOUNTING PROVISION THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ARNS3DRNDL*;ARNS3DRNDL$DR*;ARNS3DRNDL$$DR*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA38) | Reply |
| L | LEFT-HAND |
| R | RIGHT-HAND |
ARNT*GINLET FLANGE MOUNTING PROVISION SPACING
THE SPACING OF THE INLET FLANGE MOUNTING PROVISION.
Enter the applicable ISAC from the table below, followed by the Mode Code and the clear text reply.
(ARNT1AGCLEARTEXT)
| Table 1 |
| ISAC Field Indicator (0362) | Location |
| 1A | SINGLE INLET |
| 1B | 1ST OUTLET |
| 1C | 2ND OUTLET |
| 1D | 3RD OUTLET |
| 1E | 4TH OUTLET |
| 1F | 5TH OUTLET |
| 1G | 6TH OUTLET |
| 1H | 7TH OUTLET |
| 1J | 8TH OUTLET |
| 1K | 1ST INLET |
| 1L | 2ND INLET |
| 1M | 3RD INLET |
| 1N | 4TH INLET |
| 1P | ALL INLETS |
ARTF*JINLET INTEGRAL MANIFOLD EXHAUST PIPE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN INLET INTEGRAL MANIFOLD EXHAUST PIPE,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARTF3AEEJAC2.0*;ARTF3AEEJAC2.0$JAC2.0*;ARTF3AEEJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3HIW | ALL INLETS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ARTL*DOUTLET FLANGE SHAPE
THE PHYSICAL CONFIGURATION OF THE OUTLET FLANGE.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ARTL3HOUDAEL*;ARTL3HOUDAEL$DBT*;ARTL3HOUDAEL$$DBT*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3HIS | FIRST OUTLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3ILG | SINGLE OUTLET |
| Table 2 |
| Reply Code (AD07) | Reply |
| AEL | ELLIPTICAL |
| BT | OVAL |
| HF | RECTANGLE |
| RD | ROUND |
| SQ | SQUARE |
| TR | TRIANGULAR |
ARTM*JOUTLET FLANGE MOUNTING PROVISION AND QUANTITY
INDICATES THE TYPE AND NUMBER OF OUTLET FLANGE MOUNTING PROVISIONS PROVIDED.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit.
(ARTM3AEEJGY2*;ARTM3AEEJGY2$$JGY3*;ARTM3AEEJGY2$JGY2*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3HIS | FIRST OUTLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3ILG | SINGLE OUTLET |
| Table 2 |
| Reply Code (AB89) | Reply |
| GY | HOLES |
| GG | STUDS |
ARTN*JOUTLET FLANGE MOUNTING HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE PASSING THROUGH THE CENTER OF AN OUTLET FLANGE MOUNTING HOLE,AND TERMINATING AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARTN3HISJAA2.0*;ARTN3HISJAA2.0$JAA2.0*;ARTN3HISJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3HIS | FIRST OUTLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3ILG | SINGLE OUTLET |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ARTP*JOUTLET FLANGE MOUNTING STUD LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN OUTLET FLANGE MOUNTING STUD,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARTP3HISJAA2.0*;ARTP3HISJAA2.0$JAA2.0*;ARTP3HISJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HIS | FIRST OUTLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ARTQ*AOUTLET FLANGE MOUNTING PROVISION THREAD SIZE
DESIGNATES THE THREAD DIAMETER AND NUMBER OF THREADS PER MEASUREMENT SCALE OF THE OUTLET FLANGE MOUNTING PROVISION.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(ARTQ1JAU4)
| Table 1 |
| ISAC Field Indicator (0362) | Location |
| 1A | SINGLE INLET |
| 1B | 1ST OUTLET |
| 1C | 2ND OUTLET |
| 1D | 3RD OUTLET |
| 1E | 4TH OUTLET |
| 1F | 5TH OUTLET |
| 1G | 6TH OUTLET |
| 1H | 7TH OUTLET |
| 1J | 8TH OUTLET |
| 1Q | SINGLE OUTLET |
| 1R | ALL OUTLETS |
ARTR*DOUTLET FLANGE MOUNTING PROVISION THREAD SERIES DESIGNATOR
A DESIGNATION INDICATING THE DIAMETER-PITCH AND THE NUMBER OF THREADS PER MEASUREMENT SCALE APPLIED TO A SERIES OF SPECIFIC DIAMETERS OF AN OUTLET FLANGE MOUNTING PROVISION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ARTR3HISDNP*;ARTR3HISDNP$DNC*;ARTR3HISDNP$$DNC*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HIS | FIRST OUTLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH06) | Reply |
| NP | NPT |
| NC | UNC |
| NF | UNF |
ARTS*DOUTLET FLANGE MOUNTING PROVISION THREAD DIRECTION
THE DIRECTION OF THE OUTLET FLANGE MOUNTING PROVISION THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ARTS3HISDL*;ARTS3HISDL$DR*;ARTS3HISDL$$DR*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HIS | FIRST OUTLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA38) | Reply |
| L | LEFT-HAND |
| R | RIGHT-HAND |
ARTT*GOUTLET FLANGE MOUNTING PROVISION SPACING
A MEASUREMENT OF THE SPACING OF THE OUTLET FLANGE MOUNTING PROVISION.
Enter the applicable ISAC from the table below, followed by the Mode Code and the clear text reply.
(ARTT3AEEGCLEARTEXT)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HIS | FIRST OUTLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
IF STYLE/REPLY CODE(s) BG WERE ENTERED FOR MRC ARTH, YOU MUST ANSWER MRC (ARTJ and ARTK and ARTW and ARTX and ARTY and ARTZ)
IF STYLE/REPLY CODE(s) BH WERE ENTERED FOR MRC ARTH, YOU MUST ANSWER MRC (ARTJ and ARTK and ARWA and AJLW)
ARTH*DOUTLET CONNECTION TYPE
A NARRATIVE DESCRIPTION OF THE TYPE OF OUTLET CONNECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ARTH3AEEDBH*;ARTH3AEEDBH$DBG*;ARTH3AEEDBH$$DBG*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3HIS | FIRST OUTLET |
| 3HIT | SECOND OUTLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3ILG | SINGLE OUTLET |
| Table 2 |
| Reply Code (AB76) | Reply |
| BF | FLANGE |
| BG | THREADED |
| BH | UNTHREADED |
ARTJ*GOUTLET LOCATION
THE LOCATION OF THE OUTLET.
Enter the applicable ISAC from the table below, followed by the Mode Code and the clear text reply.
(ARTJ3DRNGCLEARTEXT)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3HIS | FIRST OUTLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3ILG | SINGLE OUTLET |
ARTK*JOUTLET PROJECTION LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE OUTLET PROJECTION,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARTK3HISJAB2.0*;ARTK3HISJAB2.0$JAB2.0*;ARTK3HISJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3HIS | FIRST OUTLET |
| 3HIT | SECOND OUTLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3ILG | SINGLE OUTLET |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ARTW*AOUTLET THREAD SIZE
DESIGNATES THE THREAD DIAMETER AND NUMBER OF THREADS PER MEASUREMENT SCALE OF THE OUTLET.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(ARTW3HISAM0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HIS | FIRST OUTLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
ARTX*DOUTLET THREAD SERIES DESIGNATOR
A DESIGNATION INDICATING THE DIAMETER-PITCH AND THE NUMBER OF THREADS PER MEASUREMENT SCALE APPLIED TO A SERIES OF DIAMETERS OF AN OUTLET.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ARTX3AEEDNT*;ARTX3AEEDNT$DNF*;ARTX3AEEDNT$$DNF*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HIS | FIRST OUTLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH06) | Reply |
| NQ | NEF |
| BY | NF |
| SC | NPSC |
| PM | NPSM |
| NP | NPT |
| NT | NPTF |
| UN | UN |
| NC | UNC |
| NF | UNF |
ARTY*DOUTLET THREAD DIRECTION
THE DIRECTION OF THE OUTLET THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ARTY3HISDL*;ARTY3HISDL$DR*;ARTY3HISDL$$DR*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3HIS | FIRST OUTLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA38) | Reply |
| L | LEFT-HAND |
| R | RIGHT-HAND |
ARTZ*DOUTLET THREAD LOCATION
INDICATES THE LOCATION OF THE THREAD ON THE OUTLET.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ARTZ1EDABX)
| Table 1 |
| ISAC Field Indicator (0362) | Location |
| 1A | SINGLE INLET |
| 1B | 1ST OUTLET |
| 1C | 2ND OUTLET |
| 1D | 3RD OUTLET |
| 1E | 4TH OUTLET |
| 1F | 5TH OUTLET |
| 1G | 6TH OUTLET |
| 1H | 7TH OUTLET |
| 1J | 8TH OUTLET |
| 1Q | SINGLE OUTLET |
| 1R | ALL OUTLETS |
| Table 2 |
| Reply Code (AJ91) | Reply |
| ABY | EXTERNAL |
| ABX | INTERNAL |
ARWA*JOUTLET OUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE OUTLET,WITH TERMINATED POINTS ON THE OUTSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARWA3AEEJAB2.0*;ARWA3AEEJAB2.0$JAB2.0*;ARWA3AEEJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3HIS | FIRST OUTLET |
| 3HIT | SECOND OUTLET |
| 3HIX | ALL OUTLETS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3ILG | SINGLE OUTLET |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJLW*JOUTLET INSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE OUTLET,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJLW3HITJAB2.0*;AJLW3HITJAB2.0$JAB2.0*;AJLW3HITJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3HIS | FIRST OUTLET |
| 3HIT | SECOND OUTLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3ILG | SINGLE OUTLET |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ARWC*JOUTLET INTEGRAL TAIL PIPE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE OUTLET INTEGRAL TAIL PIPE,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARWC3HISJAC2.0*;ARWC3HISJAC2.0$JAC2.0*;ARWC3HISJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DRN | SINGLE INLET |
| 3HIS | FIRST OUTLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) BF WERE ENTERED FOR MRC ARWE, YOU MUST ANSWER MRC (ARWF and ARWG and ARWH and ARWJ and ARWK)
IF STYLE/REPLY CODE(s) BG WERE ENTERED FOR MRC ARWE, YOU MUST ANSWER MRC (ARWF and ARWG and ARWY and ARWZ and ARXA and ARXB)
IF STYLE/REPLY CODE(s) BH WERE ENTERED FOR MRC ARWE, YOU MUST ANSWER MRC (ARWF and ARWG and ARXC and ARXD)
ARWE*DWATER INLET CONNECTION TYPE
A NARRATIVE DESCRIPTION OF THE TYPE OF WATER INLET CONNECTION.
Enter the applicable reply code from the table below
(ARWEDBG)
| Table 1 |
| Reply Code (AB76) | Reply |
| BF | FLANGE |
| BG | THREADED |
| BH | UNTHREADED |
ARWF*GWATER INLET LOCATION
THE LOCATION OF THE WATER INLET.
Enter clear text.
(ARWFGCLEARTEXT)
ARWG*JWATER INLET PROJECTION LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE WATER INLET PROJECTION,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARWGJAB2.0*;ARWGJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ARWH*DWATER INLET FLANGE SHAPE
THE PHYSICAL CONFIGURATION OF THE WATER INLET FLANGE.
Enter the applicable reply code from the table below
(ARWHDRD)
| Table 1 |
| Reply Code (AD07) | Reply |
| BT | OVAL |
| HF | RECTANGLE |
| RD | ROUND |
| SQ | SQUARE |
| TR | TRIANGULAR |
ARWJ*GWATER INLET FLANGE BOLT HOLE SPACING
A MEASUREMENT OF THE SPACING OF THE WATER INLET FLANGE BOLT HOLES.
Enter clear text.
(ARWJGCLEARTEXT)
ARWK*AWATER INLET FLANGE BOLT HOLE QUANTITY
THE NUMBER OF WATER INLET FLANGE BOLT HOLES PROVIDED.
Enter the numeric reply with a minimum of one digit.
(ARWKA10*)
ARWY*AWATER INLET THREAD SIZE
DESIGNATES THE THREAD DIAMETER AND QUANTITY OF THREADS PER SPECIFIC MEASUREMENT SCALE.
Enter the alpha-numeric reply with a minimum of one character.
(ARWYAC5)
ARWZ*DWATER INLET THREAD SERIES DESIGNATOR
A DESIGNATION INDICATING THE DIAMETER-PITCH AND THE NUMBER OF THREADS PER SPECIFIC MEASUREMENT SCALE APPLIED TO A SERIES OF SPECIFIC DIAMETERS OF A WATER INLET.
Enter the applicable reply code from the table below
(ARWZDNC)
| Table 1 |
| Reply Code (AH06) | Reply |
| PM | NPSM |
| NP | NPT |
| NC | UNC |
| NF | UNF |
ARXA*DWATER INLET THREAD DIRECTION
THE DIRECTION OF THE WATER INLET THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable reply code from the table below
(ARXADR)
| Table 1 |
| Reply Code (AA38) | Reply |
| L | LEFT-HAND |
| R | RIGHT-HAND |
ARXB*DWATER INLET THREAD LOCATION
INDICATES THE LOCATION/S/ OF THE WATER INLET ON WHICH THREAD IS LOCATED.
Enter the applicable reply code from the table below
(ARXBDABX)
| Table 1 |
| Reply Code (AJ91) | Reply |
| ABY | EXTERNAL |
| ABX | INTERNAL |
ARXC*JWATER INLET OUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE WATER INLET,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARXCJAA2.0*;ARXCJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ARXD*JWATER INLET INSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE WATER INLET,WITH TERMINATED POINTS ON THE INSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARXDJAC2.0*;ARXDJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) BF WERE ENTERED FOR MRC ARXE, YOU MUST ANSWER MRC (ARXF and ARXG and ARXH and ARXJ)
IF STYLE/REPLY CODE(s) BG WERE ENTERED FOR MRC ARXE, YOU MUST ANSWER MRC (ARXF and ARXG and ARXH and ARXR and ARXS and ARWB and ARXT)
IF STYLE/REPLY CODE(s) BH WERE ENTERED FOR MRC ARXE, YOU MUST ANSWER MRC (ARXF and ARXG and ARXH and ARXW and ARXX)
ARXE*DWATER OUTLET CONNECTION TYPE
A NARRATIVE DESCRIPTION OF THE TYPE OF WATER OUTLET CONNECTION.
Enter the applicable reply code from the table below
(ARXEDBH)
| Table 1 |
| Reply Code (AB76) | Reply |
| BF | FLANGE |
| BG | THREADED |
| BH | UNTHREADED |
ARXF*AWATER OUTLET QUANTITY
THE NUMBER OF WATER OUTLETS FURNISHED WITH THE ITEM.
Enter the numeric reply with a minimum of one digit.
(ARXFA10*)
ARXG*GWATER OUTLET LOCATION
THE LOCATION OF THE WATER OUTLET.
Enter clear text.
(ARXGGCLEARTEXT)
ARXH*JWATER OUTLET PROJECTION LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE WATER OUTLET PROJECTION,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARXHJAC2.0*;ARXHJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ARXJ*DWATER OUTLET FLANGE SHAPE
THE PHYSICAL CONFIGURATION OF THE WATER OUTLET FLANGE.
Enter the applicable reply code from the table below
(ARXJDRD)
| Table 1 |
| Reply Code (AD07) | Reply |
| BT | OVAL |
| HF | RECTANGLE |
| RD | ROUND |
| SQ | SQUARE |
| TR | TRIANGULAR |
ARXR*AWATER OUTLET THREAD SIZE
DESIGNATES THE THREAD DIAMETER AND QUANTITY OF THREADS PER SPECIFIC MEASUREMENT SCALE.
Enter the alpha-numeric reply with a minimum of one character.
(ARXRAH3)
ARXS*DWATER OUTLET THREAD SERIES DESIGNATOR
A DESIGNATION INDICATING THE DIAMETER-PITCH AND THE NUMBER OF THREADS PER SPECIFIC MEASUREMENT SCALE APPLIED TO A SERIES OF A SPECIFIC DIAMETERS OF A WATER OUTLET.
Enter the applicable reply code from the table below
(ARXSDNC)
| Table 1 |
| Reply Code (AH06) | Reply |
| NP | NPT |
| NC | UNC |
| NF | UNF |
ARWB*DWATER OUTLET THREAD DIRECTION
THE DIRECTION OF THE WATER OUTLET THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDSIN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable reply code from the table below
(ARWBDL)
| Table 1 |
| Reply Code (AA38) | Reply |
| L | LEFT-HAND |
| R | RIGHT-HAND |
ARXT*DWATER OUTLET THREAD LOCATION
INDICATES THE LOCATION/S/ OF THE WATER OUTLET ON WHICH THE THREAD IS LOCATED.
Enter the applicable reply code from the table below
(ARXTDABY)
| Table 1 |
| Reply Code (AJ91) | Reply |
| ABY | EXTERNAL |
| ABX | INTERNAL |
ARXW*JWATER OUTLET OUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE WATER OUTLET,WITH TERMINATED POINTS ON THE OUTSIDE CIRCUMFERNCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARXWJAB2.0*;ARXWJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ARXX*JWATER OUTLET INSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE WATER OUTLET,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARXXJAB2.0*;ARXXJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF YOU ANSWER MRC ARXY, YOU MUST ANSWER MRC (ARXZ and ARYA)
ARXY*JNONCONNECTION OUTLET TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF NONCONNECTION OUTLETS USED ON THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(ARXYJAD2*;ARXYJAD2$$JAD3*)
| Table 1 |
| Reply Code (AL64) | Reply |
| AB | PERFORATED |
| AC | ROUND HOLE |
| AD | SLOTTED |
| AE | TUBE |
ARXZ*GNONCONNECTION OUTLET LOCATION
INDICATES THE LOCATION/S/ OF THE NONCONNECTION OUTLET ON THE ITEM.
Enter clear text.
(ARXZGCLEARTEXT)
ARYA*GNONCONNECTION OUTLET SIZE
DESIGNATES THE SIZE OF THE NONCONNECTION OUTLET INCLUDED ON THE ITEM.
Enter clear text.
(ARYAGCLEARTEXT)
ARWL*JWATER INLET FLANGE BOLT HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE WATER INLET FLANGE BOLT HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARWLJAB2.0*;ARWLJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ARWT*AWATER INLET FLANGE BOLT HOLE THREAD SIZE
DESIGNATES THE THREAD DIAMETER AND NUMBER OF THREADS PER MEASUREMENT SCALE OF THE WATER INLET FLANGE BOLT HOLE.
Enter the alpha-numeric reply with a minimum of one character.
(ARWTAU4)
ARWW*DWATER INLET FLANGE BOLT HOLE THREAD SERIES DESIGNATOR
A DESIGNATION INDICATING THE DIAMETER-PITCH AND THE NUMBER OF THREADS PER MEASURMENT SCALE APPLIED TO A SERIES OF SPECIFIC DIAMETERS OF A WATER INLET FLANGE BOLT HOLE.
Enter the applicable reply code from the table below
(ARWWDNC)
| Table 1 |
| Reply Code (AH06) | Reply |
| NP | NPT |
| NC | UNC |
| NF | UNF |
ARWX*DWATER INLET FLANGE BOLT HOLE THREAD DIRECTION
THE DIRECTION OF THE WATER INLET FLANGE BOLT HOLE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN COUNTERCLOCKWISE DIRECTION.
Enter the applicable reply code from the table below
(ARWXDL)
| Table 1 |
| Reply Code (AA38) | Reply |
| L | LEFT-HAND |
| R | RIGHT-HAND |
ARXK*JWATER OUTLET FLANGE BOLT CIRCLE DIAMETER
THE LENGTH OF A STRAIGHT LINE PASSING THROUGH THE CENTER OF THE WATER OUTLET FLANGE BOLT CIRCLE,WITH TERMINATED POINTS AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARXKJAA2.0*;ARXKJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ARXL*AWATER OUTLET FLANGE BOLT HOLE QUANTITY
THE NUMBER OF BOLT HOLES INCLUDED ON THE WATER OUTLET FLANGE.
Enter the numeric reply with a minimum of one digit.
(ARXLA10*)
ARXM*JWATER OUTLET FLANGE BOLT HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE PASSING THROUGH THE CENTER OF A WATER OUTLET FLANGE BOLT HOLE,AND TERMINATING AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARXMJAB2.0*;ARXMJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ARYB*AHAND HOLE QUANTITY
THE NUMBER OF HAND HOLES PROVIDED ON THE ITEM.
Enter the numeric reply with a minimum of one digit.
(ARYBA10*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDG4)
| Table 1 |
| Reply Code (EN02) | Reply |
| G4 | COMPREHENSIVE PROCUREMENT GUIDELINE - VEHICULAR PRODUCTS - REBUILT VEHICULAR PARTS |
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ANTN*GSPECIFIC USE
THE REQUIRED PURPOSE OR APPLICATION FOR WHICH THE ITEM IS DESIGNED.
Enter clear text.
(ANTNGCLEARTEXT)
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCF2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CF | CUBIC FEET |
| CM | CUBIC METERS |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
KZTS*DCOGNIZANT SERVICE
THE MILITARY SERVICE THAT INITIALLY PROCURED THE ITEM FROM THE CONTRACTOR.
Enter the applicable reply code from the table below
(KZTSDF)
| Table 1 |
| Reply Code (AP57) | Reply |
| F | UNITED STATES AIR FORCE |
| N | UNITED STATES NAVY |
| A | USA |
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAQ6)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAE3)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.
(NTRDA80-05-28*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ052*;HZRDDHAZ012$$DHAZ285*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ012 | COPPER |
| HAZ092 | MAGNESIUM |
| HAZ277 | PHENOL |
| HAZ285 | PLASTIC |
| HAZ052 | ZINC |
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information