A narrow decorative strip of material attached to the outside of the leg(s) of men's trousers.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED09869*)
CDYPDDEPARTMENT DESIGNATION
THE MILITARY,CIVILIAN,OR GOVERNMENT DEPARTMENT UTILIZING THE ITEM.
Enter the applicable reply code from the table below
(CDYPDBDU*;CDYPDBBC$$DAES*)
| Table 1 |
| Reply Code (AL31) | Reply |
| BCS | ABLE SEAMAN |
| BCH | ACTING SUB LIEUTENANT |
| AVK | AERIAL PHOTOGRAPHER |
| BDW | AIR |
| AUC | ARTILLERY |
| AVH | ASSISTANT AWACS |
| AVL | AVIATOR-MEDICAL DOCTOR |
| BCP | BASE WARRANT OFFICER |
| AEC | BUREAU OF ENGRAVING AND PRINTING |
| BBU | CANADIAN ARMED FORCES |
| BBW | CANADIAN ARMY |
| BCA | CANADIAN COAST GUARD |
| BCN | CANADIAN FORCES CHIEF WARRANT OFFICER |
| BBY | CANADIAN FORCES, CADETS |
| BBT | CANADIAN MILITARY COLLEGES |
| AUD | CAVALRY |
| BCQ | CHIEF PETTY OFFICER FIRST CLASS |
| BCR | CHIEF PETTY OFFICER SECOND CLASS |
| ATW | CHIEF WARRANT OFFICER |
| BCM | COMMAND CHIEF WARRANT OFFICER |
| BDS | COMMUNICATIONS |
| BCF | CORRECTIONAL SERVICES, CANADA |
| ALS | DEFENSE LOGISTICS AGENCY |
| BBD | DEFENSE PERSONNEL SUPPORT CENTER |
| AEE | DEPARTMENT OF DEFENSE |
| BCG | DEPARTMENT OF NATIONAL DEFENSE, CANADA |
| AEF | DEPARTMENT OF THE TREASURY |
| ACL | DRUM MAJOR |
| BDQ | ELECTRONIC |
| AEG | FEDERAL AVIATION AGENCY |
| AUF | FIELD ARTILLERY |
| AVG | FLIGHT COMBAT LEADER |
| AVF | FLIGHT ENGINEER |
| BBA | FRENCH AIR FORCES |
| AVR | FRENCH GENDARMERY |
| BBB | FRENCH LAND FORCES |
| BBC | FRENCH NAVAL FORCES |
| AEH | GENERAL SERVICES ADMINISTRATION |
| AUE | HORSE ARTILLERY |
| AUB | INFANTRY |
| BDV | LAND |
| BCJ | MASTER CORPORAL |
| BCL | MASTER SEAMAN |
| BCK | MASTER WARRANT OFFICER |
| AVE | MEDICAL DOCTOR |
| AEJ | NATIONAL AERONAUTICS AND SPACE ADMINISTRATION |
| BCE | NONCOMMISSIONED PERSONNEL |
| AVM | OBSERVER |
| AEK | OFFICE OF THE SECRETARY OF DEFENSE |
| BCV | OFFICER CADET |
| BDR | OPTRONIC |
| BCT | PIPE MAJOR |
| BBV | ROYAL CANADIAN AIR FORCE |
| BBX | ROYAL CANADIAN NAVY |
| ATP | ROYAL SAUDI AIR FORCE |
| AZK | ROYAL SAUDI NAVAL FORCE |
| ALT | SAUDI ARABIAN ARMY |
| AVN | SIGNAL CORPS |
| BBZ | SOLICITOR GENERAL, CANADA |
| BDU | SYSTEMS |
| BDT | TACTICAL |
| AVJ | TEST-FLIGHT ENGINEER |
| AUA | TRAINING RESERVE NONCOMMISSIONED OFFICERS |
| ATV | TRAINING RESERVE OFFICERS |
| BCU | TRUMPET/BUGLE MAJOR |
| AEL | US AIR FORCE |
| AEM | US ARMY |
| AEN | US COAST AND GEODETIC SURVEY |
| AEP | US COAST GUARD |
| AEQ | US MARINE CORPS |
| AER | US NAVY |
| AES | VETERANS ADMINISTRATION |
| AVD | VOLUNTEER, SHORT PERIOD |
HUESDCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(HUES3AEEDBR0176*;HUES3AEEDBR0176$DKH0000*;HUES3AEEDBR0176$$DKH0000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BBR | STRIPE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD06) | Reply |
| AL0000 | ALUMINUM |
| A | ANY ACCEPTABLE |
| BL0000 | BLACK |
| BL0043 | BLACK, COLOR ASSN OF THE US, 65018 |
| BL0172 | BLACK, COLOR ASSN OF THE US, 67138 |
| BL0032 | BLACK, FED STD 595, 27038 |
| BL0148 | BLACK, SHADE 97201 |
| BU0000 | BLUE |
| BU0323 | BLUE, COLOR ASSN OF THE US, 65010 |
| BU0328 | BLUE, COLOR ASSN OF THE US, 65011 |
| BU0251 | BLUE, COLOR ASSN OF THE US, 65012 |
| BU0229 | BLUE, COLOR ASSN OF THE US, 65014 |
| BU0404 | BLUE, COLOR ASSN OF THE US, 67117 |
| BU0470 | BLUE, COLOR ASSN OF THE US, 67118 |
| BU0471 | BLUE, COLOR ASSN OF THE US, 67120 |
| BU0473 | BLUE, COLOR ASSN OF THE US, 67121 |
| BU0405 | BLUE, COLOR ASSN OF THE US, 67124 |
| BU0467 | BLUE, COLOR ASSN OF THE US, 67126 |
| BU0095 | BLUE, COLOR ASSN OF THE US, 70077 |
| BU0005 | BLUE, DARK |
| BU0169 | BLUE, FLAG |
| BU0450 | BLUE, LIGHT CABLE NO. 67120 |
| BU0033 | BLUE, NAVY |
| BU0409 | BLUE, SHADE 94305 |
| BU0049 | BLUE, TEAL |
| BU0050 | BLUE, ULTRAMARINE |
| BU0345 | BLUE, US ARMY, 152 |
| BU0301 | BLUE, US MARINE CORPS, 2307 |
| BU0263 | BLUE, US MARINE CORPS, 2316 |
| BU0242 | BLUE, US NAVY, 3304 |
| BU0266 | BLUE, US NAVY, 3313-OBSOLETE |
| BU0337 | BLUE, US NAVY, 3329 |
| BU0245 | BLUE, US NAVY, 3331 |
| BU0346 | BLUE, US NAVY, 3332 |
| BU0269 | BLUE, US NAVY, 3346 |
| BU0248 | BLUE, US NAVY, 3357-OBSOLETE |
| BU0347 | BLUE, US NAVY, 3362 |
| BU0339 | BLUE, US NAVY, 3365 |
| BU0387 | BLUE, US NAVY, 3372 |
| MS0012 | BRASS |
| MS0065 | BRONZE |
| BR0000 | BROWN |
| BR0176 | BROWN, US ARMY, 390 |
| GR0450 | EMERALD, COLOR ASSN OF THE US, 67128 |
| GR0319 | EMERALD, COLOR ASSN OF THE US, 70063 |
| GL0000 | GOLD |
| GL0016 | GOLD, COLOR ASSN OF THE US, 65021 |
| GL0027 | GOLD, SHADE 105802 |
| GL0029 | GOLD, SHADE 99025 |
| GL0030 | GOLD, SHADE 99309 |
| GL0018 | GOLD, US NAVY, 3903 |
| YE0123 | GOLDENLITE, COLOR ASSN OF THE US, 17425 |
| YE0178 | GOLDENLITE, COLOR ASSN OF THE US, 67107 |
| GY0142 | GRAY, COLOR ASSN OF THE US, 65008 |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0134 | GREEN, COLOR ASSN OF THE US, 66034 |
| GR0294 | GREEN, COLOR ASSN OF THE US, 70064 |
| GR0291 | GREEN, COLOR ASSN OF THE US, 70066 |
| GR0011 | GREEN, OLIVE |
| GR0451 | GREEN, OLIVE, US ARMY, 322 |
| GR0413 | GREEN, SHADE 95303 |
| GR0485 | GREEN, SHADE 99303 |
| GR0486 | GREEN, SHADE 99316 |
| GR0040 | GREEN, SPRUCE |
| GR0297 | GREEN, US ARMY, 107 |
| GR0298 | GREEN, US ARMY, 108 |
| GR0316 | GREEN, US ARMY, 159 |
| GR0221 | GREEN, US ARMY, 344 |
| GR0217 | GREEN, US ARMY, 44 |
| GR0339 | GREEN, US ARMY, 507 |
| GR0270 | GREEN, US MARINE CORPS, 2212-OBSOLETE |
| GR0317 | GREEN, US MARINE CORPS, 2223 |
| GR0225 | GREEN, US MARINE CORPS, 2234 |
| GR0333 | GREEN, US MARINE CORPS, 2241 |
| GR0318 | GREEN, US NAVY, 3435 |
| KH0000 | KHAKI |
| KH0040 | KHAKI, COLOR ASSN OF THE US, 80162 |
| KH0006 | KHAKI, US MARINE CORPS, 2101 |
| KH0012 | KHAKI, US MARINE CORPS, 2115 |
| KH0034 | KHAKI, US MARINE CORPS, 2120 |
| KH0032 | KHAKI, US NAVY, 3729 |
| NA0000 | NATURAL |
| LD0000 | OLIVE DRAB |
| LD0025 | OLIVE DRAB, COLOR ASSN OF THE US, 66021 |
| LD0047 | OLIVE DRAB, COLOR ASSN OF THE US, 67133 |
| LD0053 | OLIVE DRAB, COLOR ASSN OF THE US, 67134 |
| RG0000 | ORANGE |
| RG0048 | ORANGE, COLOR ASSN OF THE US, 65003 |
| RE0000 | RED |
| RE0200 | RED, COLOR ASSN OF THE US, 65020 |
| RE0264 | RED, SHADE 99027 |
| RE0022 | SCARLET |
| RE0071 | SCARLET, COLOR ASSN OF THE US, 65006 |
| RE0238 | SCARLET, COLOR ASSN OF THE US, 67111 |
| RE0095 | SCARLET, US MARINE CORPS, 2501 |
| RE0263 | SCARLET, US MARINE CORPS, 2507 |
| SL0000 | SILVER |
| SL0007 | SILVER, GRAY |
| SL0006 | SILVER, SHADE 99341 |
| TA0090 | TAN, US ARMY, 389 |
| WH0000 | WHITE |
| WH0045 | WHITE, COLOR ASSN OF THE US, 65005 |
| WH0106 | WHITE, COLOR ASSN OF THE US, 67101 |
| WH0027 | WHITE, FED STD 595, 37875 |
| WH0019 | WHITE, OPAQUE |
| WH0141 | WHITE, SHADE 100801 |
| WH0148 | WHITE, SHADE 99020 |
| WH0110 | WHITE, SHADE 99342 |
| WH0047 | WHITE, US NAVY, 3006 |
| WH0091 | WHITE, US NAVY, 3013 |
| WH0092 | WHITE, US NAVY, 3024 |
| WH0083 | WHITE, US NAVY, 3053 |
| YE0000 | YELLOW |
| YE0146 | YELLOW, COLOR ASSN OF THE US, 65001 |
| YE0057 | YELLOW, COLOR ASSN OF THE US, 65002 |
| YE0199 | YELLOW, COLOR ASSN OF THE US, 67104 |
| YE0179 | YELLOW, COLOR ASSN OF THE US, 67108 |
| YE0150 | YELLOW, US NAVY, 3509 |
ABHPJOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAC2.0*;ABHPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMKJOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAA2.0*;ABMKJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDAFR*;CBBLDAMP$$DAYR*)
| Table 1 |
| Reply Code (AN47) | Reply |
| AMJ | BAR |
| AMP | CASE |
| AMQ | CHARM |
| AMR | CLIP |
| AMS | EMBLEM |
| AMT | EMBROIDERED |
| AFR | FERRULE |
| AXP | FRAME |
| APC | FULL COLOR AREAS |
| AYN | LAPEL |
| DBZ | LEFT |
| AYP | MEDAL |
| AYQ | NECK RIBBON |
| AYR | PENDANT |
| AYS | PLAQUE |
| AYT | RIBBON |
| AYW | RIBBON BAR |
| DCA | RIGHT |
| AYX | RING |
| AYY | SERVICE RIBBON |
| AEN | SHOULDER LOOPS |
| AYZ | SUBDUED |
| AZB | SUSPENSION BAR |
| AZC | SUSPENSION RIBBON |
| AZD | TASSEL |
| AZE | TIE TACK |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
PGCD*APROCUREMENT GROUP CODE
A FIVE DIGIT NUMERIC CODE USED TO GROUP INDIVIDUAL SIZES OF A STANDARD GENERIC ITEM.
Enter the numeric reply with five digit(s) exactly.
(PGCDA11111)
SSEQ*ASIZE SEQUENCE INDICATOR
A THREE DIGIT NUMERIC CODE USED FOR SEQUENCING ITEMS IN ASCENDING SIZE ORDER FROM SMALLEST TO LARGEST SIZE. - MRC WAS CANCELED BECAUSE THE MRC DOES NOT MAKE SENSE, IT WAS NOT REPLACED AS NO ONE UNDERSTANDS THIS MRC AND WHAT THE CODED REPLIES EQUATE TO.
Enter the numeric reply with three digit(s) exactly.
(SSEQA111)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCF2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
| CF | CUBIC FEET |
| CN | CUBIC INCHES |
| CM | CUBIC METERS |
AJAF*JUNPACKAGED UNIT LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING, IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAFJAA2.0*;AJAFJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJAG*JUNPACKAGED UNIT WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAGJAA2.0*;AJAGJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJAH*JUNPACKAGED UNIT HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAHJAB2.0*;AJAHJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDIRA000*;PRMTDAUA000$DAGA000*;PRMTDAUA000$$DAGA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJPTA000F2.0*;PMWTJPTA000F2.0$$JPTA000F2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJAUA0002.0*;PMLCJAUA0002.0$JAUA0002.0*;PMLCJAUA0002.0$$JAUA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information