FSC Information

4610	Water Purification Equipment

Colloquial Information

No Colloquials assigned to this Approve Item Name at this time

Change List

MRC MATT has been added

MRC ADNF has been deleted

MRC AFJK has been deleted

NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.

Enter the item name code.

APZMJPOTABLE WATER CAPACITY

THE AMOUNT OF PURIFIED WATER THE ITEM IS CAPABLE OF PRODUCING FOR A GIVEN PERIOD OF TIME.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

Table 1
	Reply Code (AB10)	Reply
	G	GALLONS
	L	LITERS

Table 2
	Reply Code (AC11)	Reply
	G	PER DAY
	D	PER HOUR
	E	PER MINUTE

IF STYLE/REPLY CODE(s) AD WERE ENTERED FOR MRC AKDJ, YOU MUST ANSWER MRC (ACDC and CRFK)

AKDJ*DPRIME MOVER TYPE

INDICATES THE TYPE OF PRIME MOVER INCLUDED WITH THE UNIT.

Enter the applicable reply code from the table below

Table 1
	Reply Code (AG27)	Reply
	AC	DIESEL ENGINE
	AD	ELECTRIC MOTOR
	AE	GASOLINE ENGINE

IF STYLE/REPLY CODE(s) B OR D WERE ENTERED FOR MRC ACDC, YOU MUST ANSWER MRC (ELEC and FREQ and FAAZ)

IF STYLE/REPLY CODE(s) C WERE ENTERED FOR MRC ACDC, YOU MUST ANSWER MRC (ELEC)

ACDC*DCURRENT TYPE

INDICATES THE TYPE OF CURRENT WHETHER ALTERNATING,DIRECT,OR BOTH.

Enter the applicable reply code from the table below

Table 1
	Reply Code (AB62)	Reply
	B	AC
	D	AC/DC
	C	DC

ELEC*BVOLTAGE IN VOLTS

THE TOTAL ELECTRICAL VOLTAGE.

Enter a reply with a minimum of one digit on either side of the decimal point.

(ELECB2.0*;ELECB2.0$BM2.0;ELECB2.0$$BM2.0*)

FREQ*BFREQUENCY IN HERTZ

THE CYCLES PER SECOND /HERTZ/ OF THE ALTERNATING CURRENT.

Enter a reply with a minimum of one digit on either side of the decimal point.

(FREQB2.0*;FREQB2.0$BM2.0;FREQB2.0$$BM2.0*)

THE NUMBER OF ALTERNATING CURRENT PHASES.

Enter the applicable reply code from the table below

(FAAZDB*;FAAZDA$DC*;FAAZDA$$DC*)

Table 1
	Reply Code (AD02)	Reply
	A	SINGLE
	C	THREE
	B	TWO

AHZZ*DMOTOR ENVIRONMENTAL PROTECTION

THE ENVIRONMENTAL ELEMENTS OR CONDITIONS THAT THE MOTOR IS DESIGNED OR PROTECTED TO RESIST OR WITHSTAND SATISFACTORILY.

Enter the applicable reply code from the table below

Table 1
	Reply Code (AA65)	Reply
	AJ	MILDEW RESISTANT

CRFK*DELECTROMAGNETIC INTERFERENCE SUPPRESSION

AN INDICATION OF WHETHER OR NOT PROVISIONS TO SUPPRESS ELECTROMAGNETIC INTERFERENCE /EMI/ ARE PROVIDED.

Enter the applicable reply code from the table below

Table 1
	Reply Code (AB22)	Reply
	C	NOT PROVIDED
	B	PROVIDED

AHZX*BPRIME MOVER HORSEPOWER RATING

THE RATED HORSEPOWER OF THE PRIME MOVER.

Enter a reply with a minimum of one digit on either side of the decimal point.

AQDBDDISINFECTION UNIT TYPE

INDICATES THE TYPE OF DISINFECTION UNIT PROVIDED.

Enter the applicable reply code from the table below

Table 1
	Reply Code (AK96)	Reply
	AB	CHLORINATOR
	AC	HYPOCHLORINATOR

AQDC*ADISINFECTION UNIT QUANTITY

THE NUMBER OF DISINFECTION UNITS PROVIDED.

Enter the numeric reply with a minimum of one digit.

AQDD*DFEED TYPE

INDICATES THE TYPE OF FEED PROVIDED.

Enter the applicable reply code from the table below

Table 1
	Reply Code (AK97)	Reply
	AB	DIRECT
	AC	SOLUTION

AQDE*DFEED CONTROL TYPE

INDICATES THE TYPE OF FEED CONTROL PROVIDED.

Enter the applicable reply code from the table below

Table 1
	Reply Code (AK03)	Reply
	AAB	AUTOMATIC
	AAP	MANUAL
	ABB	SEMI-AUTOMATIC

AQDF*JMAXIMUM FEED RATE

THE MAXIMUM AMOUNT THE ITEM WILL FEED IN A GIVEN PERIOD OF TIME.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

Table 1
	Reply Code (AB10)	Reply
	G	GALLONS
	L	LITERS
	P	POUNDS

Table 2
	Reply Code (AC11)	Reply
	F	PER 24 HOURS
	D	PER HOUR

A NUMERIC VALUE WHICH REPRESENTS A POSITIVE WHOLE VALUE WITHOUT REGARD TO ANY UNIT OF MEASURE.

Enter the numeric reply with a minimum of one digit.

IF STYLE/REPLY CODE(s) AB WERE ENTERED FOR MRC AQDH, YOU MUST ANSWER MRC (AQDJ and AQDM and AQDP and AQGA and AQGB)

IF STYLE/REPLY CODE(s) AC WERE ENTERED FOR MRC AQDH, YOU MUST ANSWER MRC (AQGC)

AQDH*DPRETREATMENT EQUIPMENT TYPE

INDICATES THE TYPE OF PRETREATMENT EQUIPMENT PROVIDED.

Enter the applicable reply code from the table below

(AQDHDAB*;AQDHDAC$DAC*;AQDHDAC$$DAC*)

Table 1
	Reply Code (AK98)	Reply
	AC	CHEMICAL FEEDER
	AB	SOLIDS CONTACT CLARIFIER

AQDJ*DSOLID CONTACT CLARIFIER TYPE

INDICATES THE TYPE OF SOLID CONTACT CLARIFIER.

Enter the applicable reply code from the table below

Table 1
	Reply Code (AK99)	Reply
	AB	SLURRY BLANKET
	AC	SLURRY RECIRCULATION

AQDM*BSLURRY SEPARATION AREA IN SQUARE FEET

THE EFFECTIVE AREA THAT THE SLURRY WILL SEPARATE TURBIDITY WITHIN THE UNIT,EXPRESSED IN SQUARE FEET.

Enter a reply with a minimum of one digit on either side of the decimal point.

AQDP*BTOTAL VOLUME IN GALLONS

THE TOTAL VOLUME OF FLUID THAT THE UNIT IS DESIGNED TO ACCOMMODATE,EXPRESSED IN GALLONS.

Enter a reply with a minimum of one digit on either side of the decimal point.

AQGA*GMANUFACTURER NAME

THE NAME OF THE MANUFACTURER.

Enter clear text.

(AQGAGCLEARTEXT)

AQGB*AMANUFACTURER IDENTIFYING NUMBER

THE NUMBER USED BY THE MANUFACTURER FOR IDENTIFYING THE ITEM.

Enter the alpha-numeric reply with a minimum of one character.

AQGC*JCHEMICAL FEEDER TYPE AND QUANTITY

INDICATES THE TYPE AND NUMBER OF CHEMICAL FEEDERS PROVIDED.

Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.

(AQGCJACTEXT1234*;AQGCJACTEXT1234$$JACTEXT1234*;AQGCJACTEXT1234$JACTEXT1234*)

Table 1
	Reply Code (AL16)	Reply
	AB	DRY
	AC	SLURRY
	AD	SOLUTION

AEYCAFILTER QUANTITY

THE NUMBER OF FILTERS INCLUDED WITH THE ITEM.

Enter the numeric reply with a minimum of one digit.

ALTRDFILTER TYPE

INDICATES THE TYPE OF FILTER USED WITH THE ITEM.

Enter the applicable reply code from the table below

Table 1
	Reply Code (AH81)	Reply
	AD	GRAVITY
	AE	PRESSURE

TMQY*JFURNISHED ITEMS AND QUANTITY

THE NAME AND NUMBER OF THOSE PARTS FURNISHED WITH THE ITEM OF SUPPLY THAT HAVE NOT BEEN SPECIFIED ELSEWHERE.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.

(TMQYJAVU2*;TMQYJAVU2$$JAVU3*)

Table 1
	Reply Code (AB28)	Reply
	AVT	BLIND FLANGE
	AUL	CABLE ASSEMBLY
	AVU	CHEMICAL POT
	AVV	FIRE EXTINGUISHER
	BNE	FLANGE
	ACM	FLOAT
	BFP	FLOAT ROD
	AZE	GROUND ROD
	BCK	HOSE
	ADN	HOSE CLAMP
	AER	HOSE COUPLING
	AVW	HYDRAULIC JACK
	AVX	MANIFOLD ASSEMBLY
	BAD	MOUNTING HARDWARE
	BAE	MOUNTING KIT
	AVY	PADDLE
	AVZ	PIPE CAP
	BSC	PRESSURE GAGE
	AWB	PUMP
	AWU	WATER BUBBLER

FEAT*GSPECIAL FEATURES

THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.

Enter the reply in clear text. Separate multiple replies with a semicolon.

(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)

TEST*JTEST DATA DOCUMENT

THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.

Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.

(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)

Table 1
	Reply Code (AC28)	Reply
	A	SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
	B	STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
	C	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

SPCL*GSPECIAL TEST FEATURES

TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.

Enter the reply in clear text.

(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	Reply Code (AN62)	Reply
	V	FEDERAL MOTOR VEHICLE SAFETY STANDARD
	F	FLAMMABILITY STANDARD
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	U	INTERNATIONAL STD/SPEC
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	B	NATIONAL STD/SPEC
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	BE	ANNEALED
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BF	BOND
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CF	CIRCUMFERENCE
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	AV	CONFIGURATION
	CS	CONSTRUCTION
	BG	CORE CONDITION
	CB	CUT OFF
	AM	DELAY CLASS
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	DU	DUPLEX
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	AK	FILE NUMBER
	FN	FINISH
	FB	FLAVOR
	BH	FLUX PERCENTAGE
	FM	FORM
	FA	FORMULA
	AJ	GAGE STOCK NUMBER
	GR	GRADE
	GA	GRADUATION
	AX	GRANULES
	AY	GRIT
	GB	GROUND
	GP	GROUP
	HA	HEAVY DUTY
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LV	LEVEL
	LT	LIMIT
	MK	MARK
	AA	MARKER
	AD	MASK APERTURE
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	TA	MEDIUM TEMPER
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	AQ	NATURAL
	AU	NON-DELAY CLASS
	NR	NUMBER
	BL	OUTFIT NUMBER
	PA	PARAGRAPH
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	PD	POLISHED
	PB	PRESSURE RATING
	QA	QUALITY
	QB	QUENCHED
	RN	RANGE
	AE	RAPID
	RT	RATING
	RF	REFERENCE NUMBER
	RA	REGULAR DUTY
	BJ	RMA FLUX
	SJ	SALIENT CHARACTERISTICS
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	BD	SERIALIZED
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	AG	SLOW
	TC	SOFT TEMPER
	SK	SOURCE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	AW	STANDARD
	SR	STRAIGHT
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	BK	SUPPORT
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	AZ	UNSERIALIZED
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH

ZZZW*GDEPARTURE FROM CITED DOCUMENT

THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.

Enter the reply in clear text.

(ZZZWGAS MODIFIED BY MATERIAL*)

ZZZX*GDEPARTURE FROM CITED DESIGNATOR

THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.

Enter the reply in clear text.

(ZZZXGAS MODIFIED BY MATERIAL*)

ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS

A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.

Enter the reply in clear text.

(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)

Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.

CRTL*ACRITICALITY CODE JUSTIFICATION

THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.

Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.

(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)

If document availability code B, D, F, OR H, reply to MRC PRPY.

PRPY*APROPRIETARY CHARACTERISTICS

IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.

Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.

(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)

ELRN*GEXTRA LONG REFERENCE NUMBER

A REFERENCE NUMBER EXCEEDING 32 POSITIONS.

Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.

(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)

In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.

ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION

A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.

Enter the Reply Code from the table below.

Table 1
	Reply Code (AN58)	Reply
	A	ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD

SUPP*GSUPPLEMENTARY FEATURES

CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.

Enter the reply in clear text.Separate multiple replies with a semicolon.

(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)

ZZZV*GFSC APPLICATION DATA

THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.

Enter the name of the next higher classifiable assembly in clear text.

(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)

Reply to this MRC in accordance with Volume 3.

AGAV*GEND ITEM IDENTIFICATION

THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.

Enter the reply in clear text.

(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)

CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY

THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.

Enter the reply in clear text.

(CXCYGLINE PROCESSOR CONTROL BOARD*)

THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.

Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2

(MATT3HOUDSLG000*;MATT3HOUDSLG000$DSLG000*;MATT3HOUDSLG000$$DSLG000*)

Table 1
	ISAC Field Indicator (5000)	Location
	3AEE	OVERALL
	3HOU	LOCATION NOT OTHERWISE SPECIFIED
	3HTY	FILTERING

Table 2
	Reply Code (MA01)	Reply
	SLG000	QUARTZ

CLQL*GCOLLOQUIAL NAME

A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.

Enter the reply in clear text.

(CLQLGWOVEN WIRE CLOTH*)