A semitrailer with an insulated van type body, equipped with a refrigerating unit specifically designed to transport perishable materials.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED07497*)
CQRGDBODY MATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE BODY IS FABRICATED.
Enter the applicable reply code from the table below
(CQRGDWDC000*;CQRGDSTA000$DALA000*;CQRGDSTA000$$DALA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| STA000 | STEEL |
| WDC000 | WOOD |
CGPYDREFRIGERATING UNIT CONDENSER COOLING METHOD
THE COOLING MEANS USED TO MAINTAIN THE REQUIRED OPERATING TEMPERATURE OF THE REFRIGERATING UNIT CONDENSER.
Enter the applicable reply code from the table below
(CGPYDA)
| Table 1 |
| Reply Code (AN05) | Reply |
| ABB | AIR COOLED |
| A | ANY ACCEPTABLE |
| ABC | LIQUID COOLED |
CGQBDREFRIGERATING UNIT ELECTRIC MOTOR
AN INDICATION OF WHETHER OR NOT A REFRIGERATING UNIT ELECTRIC MOTOR IS INCLUDED.
Enter the applicable reply code from the table below
(CGQBDB*;CGQBDC$DC*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
CGQDDREFRIGERATING UNIT MOUNTING LOCATION
INDICATES THE MOUNTING LOCATION OF THE REFRIGERATING UNIT.
Enter the applicable reply code from the table below
(CGQDDABX)
| Table 1 |
| Reply Code (AJ91) | Reply |
| A | ANY ACCEPTABLE |
| ABY | EXTERNAL |
| ABX | INTERNAL |
CGPZDREFRIGERATING UNIT GASOLINE ENGINE
AN INDICATION OF WHETHER OR NOT A REFRIGERATING UNIT GASOLINE ENGINE IS INCLUDED.
Enter the applicable reply code from the table below
(CGPZDC*;CGPZDB$DC*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
ABHPJOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAA2.0*;ABHPJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMKJOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAC2.0*;ABMKJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BPQWDSUSPENSION TYPE
INDICATES THE TYPE OF SUSPENSION PROVIDED.
Enter the applicable reply code from the table below
(BPQWDEFS*;BPQWDEFM$$DEFH*)
| Table 1 |
| Reply Code (AK54) | Reply |
| EFG | CASTER WHEEL |
| EST | CASTER WHEEL W/THROUGH SHAFT AXLE |
| ESW | CASTER WHEEL W/TRUNNION AXLE |
| EFH | GIB MOUNTED ROCKER ARM |
| EFJ | INDIVIDUAL COIL SPRING |
| EFK | INDIVIDUAL FIXED SPRING |
| EFL | INDIVIDUAL LEAF SPRING |
| EFM | ROCKER ARM W/STUD SPINDLE AXLE |
| EFN | ROCKER ARM W/THROUGH SHAFT AXLE |
| EFP | ROCKER ARM W/TRUNNION AXLE |
| EFQ | STUD SPINDLE AXLE |
| EFR | THROUGH SHAFT AXLE |
| EFS | TRUNNION AXLE |
| FHX | TUBULAR STUB AXLE |
| FHY | WALKING BEAM W/SPRING |
BLWJDCONVERTER DOLLY
AN INDICATION OF WHETHER OR NOT A CONVERTER DOLLY IS INCLUDED.
Enter the applicable reply code from the table below
(BLWJDC*;BLWJDB$DC*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
CGPXDREFRIGERATING UNIT REFRIGERANT TYPE
INDICATES THE TYPE OF REFRIGERANT CONTAINED IN THE REFRIGERATING UNIT.
Enter the applicable reply code from the table below
(CGPXDAACM*;CGPXDAACL$DA*)
| Table 1 |
| Reply Code (AB75) | Reply |
| A | ANY ACCEPTABLE |
| AACL | DICHLORODIFLUOROMETHANE |
| AACM | FREON 12 |
| AACN | MONOCHLORODIFLUOROMETHANE |
| AACQ | REFRIGERANT 12 |
| AACP | THERMO KING M-20 |
AZBTLWHEEL ARRANGEMENT STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE ARRANGEMENT OF THE WHEEL(S).
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AZBTL1)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAJ1714 | 1 | MIDDLE, SINGLE |
| AAJ1723 | 10 | FRONT, MIDDLE AND REAR, SINGLE |
| AAJ1724 | 11 | REAR TANDEM, SINGLE |
| AAJ1725 | 12 | MIDDLE, DUAL |
| AAJ1726 | 13 | SEMI REAR, DUAL |
| AAJ1727 | 14 | REAR TANDEM, DUAL |
| AAJ1728 | 15 | REAR TANDEM, DUAL |
| AAJ1729 | 16 | MIDDLE TANDEM, DUAL |
| AAJ1730 | 17 | FRONT AND REAR, DUAL |
| AAJ1731 | 18 | REAR, DUAL |
| AAJ1732 | 19 | MIDDLE, SEMI REAR AND REAR, DUAL |
| AAJ1715 | 2 | SEMI REAR, SINGLE |
| AAJ1733 | 20 | FRONT, MIDDLE AND REAR, DUAL |
| AAJ1734 | 21 | REAR TANDEM, DUAL |
| AAJ1735 | 22 | FRONT AND REAR, DUAL |
| AAJ1736 | 23 | FRONT, DUAL, REAR TANDEM, DUAL |
| AAJ1737 | 24 | FRONT TRICYCLE, SINGLE, REAR DUAL |
| AAJ1738 | 25 | FRONT, SINGLE, REAR, DUAL |
| AAJ1739 | 26 | FRONT, SINGLE, REAR TANDEM, DUAL |
| AAJ1740 | 27 | FRONT, DUAL, REAR TANDEM, DUAL |
| AAJ1741 | 28 | FRONT AND REAR TANDEM, DUAL |
| AAJ1742 | 29 | FRONT AND REAR TANDEM, SINGLE |
| AAJ1716 | 3 | REAR, SINGLE |
| AAJ1743 | 30 | FRONT TANDEM, SINGLE, REAR TANDEM, DUAL |
| AAJ1744 | 31 | FRONT TANDEM, SINGLE, REAR TRIPLE, SINGLE |
| AAJ1745 | 32 | FRONT, SINGLE, REAR TRIPLE, SINGLE |
| AAJ1746 | 33 | FRONT TANDEM, SINGLE, REAR TANDEM, SINGLE |
| AAJ1747 | 34 | FRONT, SINGLE, REAR TANDEM, SINGLE |
| AAJ1748 | 35 | REAR, SINGLE |
| AAJ1749 | 36 | FRONT TANDEM, SINGLE, REAR, DUAL |
| AAJ1750 | 37 | FRONT AND REAR, SINGLE |
| AAJ1751 | 38 | FRONT TANDEM, SINGLE, REAR, DUAL |
| AAJ1752 | 39 | FRONT TANDEM, DUAL, REAR, DUAL |
| AAJ1717 | 4 | MIDDLE TANDEM, SINGLE |
| AAJ1753 | 40 | FRONT, SINGLE, REAR, DUAL |
| AAJ1754 | 41 | FRONT, SINGLE, REAR TRIPLE, DUAL |
| AAJ1755 | 42 | FRONT TANDEM, SINGLE, REAR TRIPLE, DUAL |
| AAJ1756 | 43 | FRONT, DUAL, REAR TRIPLE, DUAL |
| AAJ1757 | 44 | FRONT TANDEM, DUAL, REAR TRIPLE, DUAL |
| AAJ1758 | 45 | FRONT, SINGLE, REAR TANDEM, DUAL |
| AAJ1759 | 46 | FRONT TANDEM, SINGLE, REAR TANDEM, DUAL |
| AAJ1760 | 47 | FRONT, DUAL, REAR TANDEM, DUAL |
| AAJ1761 | 48 | FRONT AND REAR TANDEM, DUAL |
| AAJ1762 | 49 | FRONT TRICYCLE, REAR, SINGLE |
| AAJ1718 | 5 | REAR TANDEM, SINGLE |
| AAJ1719 | 6 | FRONT AND REAR, SINGLE |
| AAJ1720 | 7 | FRONT TRICYCLE, SINGLE, REAR, SINGLE |
| AAJ1721 | 8 | FRONT, SINGLE, REAR TANDEM, SINGLE |
| AAJ1722 | 9 | MIDDLE, SEMI REAR AND REAR, SINGLE |
BPGNDPARKING BRAKES
AN INDICATION OF WHETHER OR NOT PARKING BRAKES ARE INCLUDED.
Enter the applicable reply code from the table below
(BPGNDC*;BPGNDB$DB*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
BXJLDRETRACTABLE SUPPORT FEATURE
AN INDICATION OF WHETHER OR NOT A RETRACTABLE SUPPORT FEATURE IS INCLUDED.
Enter the applicable reply code from the table below
(BXJLDC*;BXJLDB$DC*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
CGPKDTOWING PINTLE HOOK
AN INDICATION OF WHETHER OR NOT A TOWING PINTLE HOOK(S) IS INCLUDED.
Enter the applicable reply code from the table below
(CGPKDB*;CGPKDC$DC*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
ATYXJCAPACITY RATING
THE RATED CAPACITY OF THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ATYXJBR2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| BX | METRIC TONS |
| BN | ROLL |
| BY | TONS |
| BR | YARD, ROLL |
MATT*DMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AEEDALA000*;MATT3AEEDALA000$DWDC000*;MATT3AEEDALA000$$DWDC000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| STA000 | STEEL |
| WDC000 | WOOD |
ADJUJINSIDE LENGTH
A MEASUREMENT OF THE LONGEST INSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJUJAC2.0*;ADJUJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJTJINSIDE WIDTH
AN INSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJTJAB2.0*;ADJTJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFMQJINSIDE HEIGHT
AN INSIDE MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN ITEM,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFMQJAB2.0*;AFMQJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CGPLJDOOR LOCATION AND QUANTITY
INDICATES THE LOCATION AND NUMBER OF DOORS INCLUDED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(CGPLJCWK2*;CGPLJCWK2$$JCWK3*)
| Table 1 |
| Reply Code (AJ91) | Reply |
| CWF | FRONT DOOR |
| ABT | FRONT END |
| CWD | FRONT END CENTER |
| CWE | FRONT END LEFT SIDE |
| BLP | FRONT LEFT SIDE |
| BYG | FRONT RIGHT SIDE |
| ACF | LEFT SIDE |
| BXN | LEFT-HAND SIDE CENTER |
| BXM | LEFT-HAND SIDE DOOR |
| BXP | LEFT-HAND SIDE REAR |
| CWK | REAR DOOR |
| CWG | REAR END |
| CWH | REAR END CENTER |
| CWJ | REAR END LEFT SIDE |
| ACR | RIGHT SIDE |
| BXT | RIGHT-HAND SIDE CENTER |
| BXS | RIGHT-HAND SIDE DOOR |
| BXW | RIGHT-HAND SIDE REAR |
BRSDDTAILGATE
AN INDICATION OF WHETHER OR NOT A TAILGATE IS INCLUDED.
Enter the applicable reply code from the table below
(BRSDDC*;BRSDDB$DB*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
ALYPDFLOOR LEVEL DESIGN
THE DESIGN OF THE FLOOR LEVEL OF THE ITEM.
Enter the applicable reply code from the table below
(ALYPDAN)
| Table 1 |
| Reply Code (AH86) | Reply |
| AN | FLAT |
| AM | TWO LEVEL |
CGPNDBODY FRONT SHAPE
THE PHYSICAL CONFIGURATION OF THE FRONT OF THE BODY.
Enter the applicable reply code from the table below
(CGPNDACY)
| Table 1 |
| Reply Code (AD07) | Reply |
| A | ANY ACCEPTABLE |
| ACY | CURVED |
| ATG | STRAIGHT |
CGPRDINTERIOR ELECTRIC OUTLET
AN INDICATION OF WHETHER OR NOT AN INTERIOR ELECTRIC OUTLET(S) IS INCLUDED.
Enter the applicable reply code from the table below
(CGPRDB*;CGPRDC$DB*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
ELEC*BVOLTAGE IN VOLTS
THE TOTAL ELECTRICAL VOLTAGE.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ELECB2.0*;ELECB2.0$$BM2.0*)
CGPT*DMEAT HANGING FACILITY
AN INDICATION OF THE FACILITY/IES/ PROVIDED FOR HANGING MEAT.
Enter the applicable reply code from the table below
(CGPTDA)
| Table 1 |
| Reply Code (AK54) | Reply |
| A | ANY ACCEPTABLE |
| DQC | HOOK |
| DQP | RAIL |
CGPW*GMAINTAINED INSIDE TEMP AT SPECIFIED OUTSIDE TEMP
THE INSIDE TEMPERATURE THAT CAN BE MAINTAINED AT A SPECIFIED OUTSIDE TEMPERATURE.
Enter clear text.
(CGPWGCLEARTEXT)
AAYX*DDRIVE CONNECTION TYPE
INDICATES THE TYPE OF CONNECTION BETWEEN THE PRIME MOVER AND THE SHAFT.
Enter the applicable reply code from the table below
(AAYXDBN*;AAYXDBR$DA*)
| Table 1 |
| Reply Code (AA85) | Reply |
| A | ANY ACCEPTABLE |
| BN | DIRECT |
| BR | V-BELT |
AAXZ*ACYLINDER QUANTITY
THE NUMBER OF CYLINDERS INCORPORATED IN THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AAXZA10*)
ANCY*BHORSEPOWER RATING
AN INDICATION OF THE RATED HORSEPOWER OF THE ITEM.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ANCYB2.0)
IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC ACDC, YOU MUST ANSWER MRC (APHA and AJSS and FAAZ)
IF STYLE/REPLY CODE(s) C WERE ENTERED FOR MRC ACDC, YOU MUST ANSWER MRC (APHA and APHB)
IF STYLE/REPLY CODE(s) D WERE ENTERED FOR MRC ACDC, YOU MUST ANSWER MRC (APHA and AJSS and FAAZ and APHB)
ACDC*DCURRENT TYPE
INDICATES THE TYPE OF CURRENT WHETHER ALTERNATING,DIRECT,OR BOTH.
Enter the applicable reply code from the table below
(ACDCDC)
| Table 1 |
| Reply Code (AB62) | Reply |
| B | AC |
| D | AC/DC |
| C | DC |
APHA*JOPERATING VOLTAGE IN VOLTS
THE AMOUNT OF OPERATING VOLTAGE,EXPRESSED IN VOLTS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(APHAJC2.0*;APHAJC2.0$$JC2.1*)
| Table 1 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJSS*JFREQUENCY IN HERTZ
THE CYCLES PER SECOND /HERTZ/ OF THE ALTERNATING CURRENT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJSSJA2.0*;AJSSJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
FAAZ*DPHASE
THE NUMBER OF ALTERNATING CURRENT PHASES.
Enter the applicable reply code from the table below
(FAAZDE*;FAAZDA$$DB*)
| Table 1 |
| Reply Code (AD02) | Reply |
| A | SINGLE |
| E | SINGLE/THREE |
| C | THREE |
| B | TWO |
APHB*JOPERATING CURRENT IN AMPS
THE AMOUNT OF OPERATING CURRENT,EXPRESSED IN AMPERES.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(APHBJA2.0*;APHBJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ASHK*BELECTRIC MOTOR HORSEPOWER RATING
THE RATED HORSEPOWER OF THE ELECTRIC MOTOR.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ASHKB2.0)
BBFK*JDISTANCE FROM KINGPIN CENTER TO FRONT END
THE DISTANCE FROM THE KINGPIN CENTER TO THE FRONT END.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BBFKJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CGNY*DFIFTH WHEEL TYPE
INDICATES THE TYPE OF FIFTH WHEEL PROVIDED ON THE ITEM.
Enter the applicable reply code from the table below
(CGNYDEFX)
| Table 1 |
| Reply Code (AK54) | Reply |
| A | ANY ACCEPTABLE |
| EFT | OPEN THROAT COUPLER PLATE |
| EFW | PERMANENT COUPLER PLATE |
| BZZ | PLATE W/KINGPIN |
| EFX | ROLLER-BOX |
CGNZ*JDISTANCE FROM DRAWBAR COUPLER CENTER TO WHEEL CENTERLINE
THE DISTANCE FROM THE CENTER OF THE DRAWBAR COUPLER TO THE WHEEL CENTERLINE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CGNZJAC2.0*;CGNZJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CGPB*DDOLLY DRAWBAR TYPE
INDICATES THE TYPE OF DRAWBAR INCLUDED WITH THE DOLLY.
Enter the applicable reply code from the table below
(CGPBDEFZ)
| Table 1 |
| Reply Code (AK54) | Reply |
| A | ANY ACCEPTABLE |
| EFY | HINGED A-FRAME |
| EFZ | HINGED TONGUE |
| EGA | RIGID A-FRAME |
| EGB | RIGID TONGUE |
CGPC*DDOLLY DRAWBAR CHARACTERISTIC
AN INDICATION OF THE CHARACTERISTIC(S) OF THE DOLLY DRAWBAR.
Enter the applicable reply code from the table below
(CGPCDAX)
| Table 1 |
| Reply Code (AH28) | Reply |
| A | ANY ACCEPTABLE |
| BG | FIXED |
| AX | TELESCOPIC |
CGPD*DDOLLY DRAWBAR COUPLER TYPE
INDICATES THE TYPE OF DOLLY DRAWBAR COUPLER PROVIDED.
Enter the applicable reply code from the table below
(CGPDDA)
| Table 1 |
| Reply Code (AH98) | Reply |
| A | ANY ACCEPTABLE |
| AW | LUNETTE |
| AG | PIN |
AQLX*DBRAKING FACILITY
AN INDICATION OF WHETHER OR NOT A BRAKING FACILITY/IES/ IS INCLUDED.
Enter the applicable reply code from the table below
(AQLXDB*;AQLXDC$DB*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
AQGA*GMANUFACTURER NAME
THE NAME OF THE MANUFACTURER.
Enter clear text.
(AQGAGCLEARTEXT)
AQGB*AMANUFACTURER IDENTIFYING NUMBER
THE NUMBER USED BY THE MANUFACTURER FOR IDENTIFYING THE ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(AQGBAU0)
CGPF*DSERVICE BRAKE TYPE
INDICATES THE TYPE OF SERVICE BRAKE(S) PROVIDED ON THE ITEM.
Enter the applicable reply code from the table below
(CGPFDLL*;CGPFDDJ$DA*)
| Table 1 |
| Reply Code (AG25) | Reply |
| EG | AIR |
| LK | AIR-HYDRAULIC |
| A | ANY ACCEPTABLE |
| GJ | ELECTRIC |
| DJ | HYDRAULIC |
| EA | VACUUM |
| LL | VACUUM-HYDRAULIC |
APHE*DOPERATION METHOD
THE MEANS USED TO OPERATE THE ITEM.
Enter the applicable reply code from the table below
(APHEDAAAF)
| Table 1 |
| Reply Code (AC58) | Reply |
| AABD | AUTOMATIC |
| AAAF | MANUAL |
IF STYLE/REPLY CODE(s) GRL WERE ENTERED FOR MRC CBBL, YOU MUST ANSWER MRC (BBFK)
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDGRE)
| Table 1 |
| Reply Code (AN47) | Reply |
| GRL | FIFTH WHEEL UPPER PLATE W/KINGPIN COUPLER |
| GRE | THREADED EXTERNAL COUPLING |
CGPJ*DAUXILIARY SUPPORT TYPE
INDICATES THE TYPE OF AUXILIARY SUPPORT(S) INCLUDED WITH THE ITEM.
Enter the applicable reply code from the table below
(CGPJDBV*;CGPJDAA$DA*)
| Table 1 |
| Reply Code (AM61) | Reply |
| A | ANY ACCEPTABLE |
| AU | AUXILIARY SUPPORT JACK |
| AA | AUXILIARY SUPPORT LEGS |
| BS | JACK |
| AP | LEG |
| BW | WITH OR WITHOUT AUXILIARY SUPPORT LEGS OR JACK |
| BV | WITHOUT AUXILIARY SUPPORT JACK |
| AV | WITHOUT AUXILIARY SUPPORT LEGS |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
ANTN*GSPECIFIC USE
THE REQUIRED PURPOSE OR APPLICATION FOR WHICH THE ITEM IS DESIGNED.
Enter clear text.
(ANTNGCLEARTEXT)
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCF2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CF | CUBIC FEET |
| CM | CUBIC METERS |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAG6)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAV0)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.
(NTRDA80-05-28*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information