A pot of single or double wall construction, heated by self-contained electrical elements and used to melt soft metals and alloys, wax, glue, and the like.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED07477*)
IF STYLE/REPLY CODE(s) GU0000 WERE ENTERED FOR MRC BTPM, YOU MUST ANSWER MRC (BTPP)
IF STYLE/REPLY CODE(s) SJ0000 WERE ENTERED FOR MRC BTPM, YOU MUST ANSWER MRC (BTPQ)
BTPMDMATERIAL FOR WHICH DESIGNED
THE MATERIAL FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(BTPMDST1546*;BTPMDRC0000$DSTA173*;BTPMDRC0000$$DSTA173*)
| Table 1 |
| Reply Code (AD09) | Reply |
| ALC000 | ALUMINUM |
| AL0000 | ALUMINUM ALLOY |
| AL0049 | ALUMINUM ALLOY, QQ-A-225/8, ALLOY 6061 |
| AL0142 | ALUMINUM ALLOY, QQ-A-250/11 |
| AL0386 | ALUMINUM ALLOY, QQ-A-250/11, ALLOY 6061, T4 |
| AL0370 | ALUMINUM ALLOY, QQ-A-250/8, ALLOY 5052, H32 |
| AL0155 | ALUMINUM ALLOY, QQ-A-325-CANCELED |
| ALA000 | ALUMINUM BRONZE |
| A | ANY ACCEPTABLE |
| AS0000 | ASBESTOS |
| AP0000 | ASPHALT |
| BC0000 | BERYLLIUM COPPER |
| ZZAZ00 | BITUMEN |
| BR0000 | BRASS |
| BN0000 | BRONZE |
| BN0257 | BRONZE, QQ-B-679, COMP 5-CANCELED |
| DFK000 | CANVAS |
| KA0000 | CARBIDE |
| CP0000 | CARDBOARD |
| CJ0000 | CERAMIC |
| STAAC0 | CHROME-STEEL |
| DFX000 | CLOTH, ACRYLIC |
| CM0000 | COBALT |
| KMD000 | COMPOSITION, FIBER |
| CW0000 | CONCRETE |
| CU0000 | COPPER |
| CK0000 | COPPER ALLOY |
| CC0000 | COTTON |
| CCH000 | COTTON DUCK |
| CCAS00 | COTTON DUCK, RUBBER IMPREGNATED |
| FB0006 | FIBER, MIL-F-10336 |
| FBK000 | FIBER, VULCANIZED |
| FG0000 | FIBERGLASS |
| GU0000 | GLUE |
| FE0000 | IRON |
| FEC000 | IRON, MALLEABLE |
| PB0000 | LEAD |
| LR0000 | LEATHER |
| LRA000 | LEATHER, ARTIFICIAL |
| LRT000 | LEATHER, RAWHIDE |
| LN0000 | LINEN |
| MEB000 | METAL, BABBITT |
| MEP000 | METAL, SHEET |
| MA0000 | MOLYBDENUM |
| NC0000 | NICKEL COPPER ALLOY |
| PV0000 | PHENOL |
| PC0000 | PLASTIC |
| PCEEY0 | PLASTIC, ACETAL RESIN POLYMER |
| PC0686 | PLASTIC, MIL-P-5425, FINISH A |
| PCAAAQ | PLASTIC, PHENOL-FORMALDEHYDE, PAPER REINFORCEMENT |
| PCAAAX | PLASTIC, VINYL |
| PC0867 | PLASTIC, VINYL CHLORIDE, MIL-I-7444 |
| PW0011 | PLYWOOD, MIL-P-18066, CLASS 1 |
| PW0012 | PLYWOOD, MIL-P-18066, CLASS 1A |
| PL0000 | POLYAMIDE NYLON |
| RC0000 | RUBBER |
| SJ0000 | SOLDER |
| ST0000 | STEEL |
| ST6337 | STEEL, AISI MT1010 |
| ST6342 | STEEL, AISI MT1015 |
| ST6349 | STEEL, AISI MT1020 |
| ST6343 | STEEL, AISI MTX1015 |
| ST6350 | STEEL, AISI MTX1020 |
| STD499 | STEEL, AMS 6442 |
| ST9457 | STEEL, ASTM A366 |
| ST1052 | STEEL, CARBON |
| STB000 | STEEL, CORROSION RESISTING |
| STA312 | STEEL, DIN 17200, 1.0501 C 35 |
| ST0597 | STEEL, GALVANIZED |
| ST0595 | STEEL, HIGH CARBON |
| STS000 | STEEL, HIGH SPEED |
| ST8171 | STEEL, MIL-S-13281, CLASS B, GRADE 2 |
| ST1804 | STEEL, MIL-S-5626 |
| ST1840 | STEEL, MIL-S-6758 |
| ST1718 | STEEL, QQ-S-624-CANCELED |
| ST7066 | STEEL, QQ-S-628, CLASS B-CANCELED |
| ST1535 | STEEL, QQ-S-631, COMP 1015-CANCELED |
| ST1536 | STEEL, QQ-S-631, COMP 1016-CANCELED |
| ST2298 | STEEL, QQ-S-631, COMP 1017-CANCELED |
| ST1537 | STEEL, QQ-S-631, COMP 1018-CANCELED |
| STB886 | STEEL, QQ-S-631, COMP 1019-CANCELED |
| ST1695 | STEEL, QQ-S-631, COMP 1020-CANCELED |
| ST2413 | STEEL, QQ-S-631, COMP 1021-CANCELED |
| STB893 | STEEL, QQ-S-631, COMP 1022-CANCELED |
| ST2299 | STEEL, QQ-S-631, COMP 1023-CANCELED |
| STB894 | STEEL, QQ-S-631, COMP 1024-CANCELED |
| ST1538 | STEEL, QQ-S-631, COMP 1025-CANCELED |
| ST8149 | STEEL, QQ-S-633, COMP C1015-CANCELED |
| ST8529 | STEEL, QQ-S-633, COMP C1016-CANCELED |
| STB083 | STEEL, QQ-S-633, COMP C1017-CANCELED |
| ST8046 | STEEL, QQ-S-633, COMP C1018-CANCELED |
| ST8604 | STEEL, QQ-S-633, COMP C1019-CANCELED |
| ST8141 | STEEL, QQ-S-633, COMP C1020-CANCELED |
| ST8526 | STEEL, QQ-S-633, COMP C1021-CANCELED |
| ST8517 | STEEL, QQ-S-633, COMP C1022-CANCELED |
| STB076 | STEEL, QQ-S-633, COMP C1023-CANCELED |
| STA173 | STEEL, QQ-S-633, COMP C1024-CANCELED |
| ST3184 | STEEL, QQ-S-633, COMP C1025-CANCELED |
| ST3260 | STEEL, QQ-S-633, COMP C1117-CANCELED |
| ST3143 | STEEL, QQ-S-633, COMP C1118-CANCELED |
| ST1851 | STEEL, QQ-S-633, COMP C1120-CANCELED |
| ST8153 | STEEL, QQ-S-633, COMP FS1015-CANCELED |
| ST9515 | STEEL, QQ-S-633, COMP FS1016-CANCELED |
| ST8158 | STEEL, QQ-S-633, COMP FS1018-CANCELED |
| ST9516 | STEEL, QQ-S-633, COMP FS1019-CANCELED |
| ST8087 | STEEL, QQ-S-633, COMP FS1020-CANCELED |
| ST9517 | STEEL, QQ-S-633, COMP FS1021-CANCELED |
| ST8154 | STEEL, QQ-S-633, COMP FS1022-CANCELED |
| ST8159 | STEEL, QQ-S-633, COMP FS1024-CANCELED |
| ST9518 | STEEL, QQ-S-633, COMP FS1025-CANCELED |
| ST8155 | STEEL, QQ-S-633, COMP FS1035-CANCELED |
| ST9519 | STEEL, QQ-S-633, COMP FS1036-CANCELED |
| ST9529 | STEEL, QQ-S-633, COMP FS1037-CANCELED |
| ST9530 | STEEL, QQ-S-633, COMP FS1038-CANCELED |
| ST9520 | STEEL, QQ-S-633, COMP FS1040-CANCELED |
| ST8156 | STEEL, QQ-S-633, COMP FS1117-CANCELED |
| ST8157 | STEEL, QQ-S-633, COMP FS1118-CANCELED |
| ST9522 | STEEL, QQ-S-633, COMP FS1120-CANCELED |
| ST2786 | STEEL, QQ-S-633, FSB1111-CANCELED |
| ST2781 | STEEL, QQ-S-633, FSB1113-CANCELED |
| ST1546 | STEEL, QQ-S-634, COMP 1015-CANCELED |
| ST1547 | STEEL, QQ-S-634, COMP 1016-CANCELED |
| STB128 | STEEL, QQ-S-634, COMP 1017-CANCELED |
| ST1548 | STEEL, QQ-S-634, COMP 1018-CANCELED |
| ST1696 | STEEL, QQ-S-634, COMP 1019-CANCELED |
| ST1697 | STEEL, QQ-S-634, COMP 1020-CANCELED |
| ST2414 | STEEL, QQ-S-634, COMP 1021-CANCELED |
| ST1698 | STEEL, QQ-S-634, COMP 1022-CANCELED |
| STB259 | STEEL, QQ-S-634, COMP 1023-CANCELED |
| STB260 | STEEL, QQ-S-634, COMP 1024-CANCELED |
| ST1549 | STEEL, QQ-S-634, COMP 1025-CANCELED |
| ST8534 | STEEL, QQ-S-634, COMP C1018-CANCELED |
| ST0975 | STEEL, QQ-S-636-CANCELED |
| ST8135 | STEEL, QQ-S-692, CLASS B, FINISH D-CANCELED |
| ST4088 | STEEL, QQ-S-692-CANCELED |
| ST0977 | STEEL, QQ-S-698 |
| ST6564 | STEEL, SAE 1018 |
| ST6015 | STEEL, SAE 1020 |
| ST6593 | STEEL, SAE 1070 |
| ST6594 | STEEL, SAE 1074 |
| ST8433 | STEEL, SAE 1075 |
| ST6595 | STEEL, SAE 1078 |
| ST6596 | STEEL, SAE 1080 |
| STB667 | STEEL, SAE 1082 |
| ST6597 | STEEL, SAE 1084 |
| ST6598 | STEEL, SAE 1085 |
| ST6599 | STEEL, SAE 1086 |
| ST6600 | STEEL, SAE 1090 |
| STD498 | STEEL, SAE 50100 |
| STF000 | STEEL, SPRING |
| STM000 | STEEL, TUNGSTEN |
| SN0000 | TIN |
| TL0000 | TOOL STEEL |
| WA0000 | WAX |
| WD0000 | WOOD |
| WD0007 | WOOD, MIL-D-18066 |
| WD0008 | WOOD, MM-L-736 |
AQHT*DCOVER
AN INDICATION OF WHETHER OR NOT A COVER IS PROVIDED.
Enter the applicable reply code from the table below
(AQHTDB)
| Table 1 |
| Reply Code (AB22) | Reply |
| C | NOT PROVIDED |
| B | PROVIDED |
ABKV*JOUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKVJFB2.0*;ABKVJFB2.0$$JFB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFEF*JINSIDE DEPTH
AN INSIDE MEASUREMENT BETWEEN SPECIFIED POINTS OF AN ITEM,IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFEFJAA2.0*;AFEFJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BTPN*DLIP
AN INDICATION OF WHETHER OR NOT A LIP IS PROVIDED.
Enter the applicable reply code from the table below
(BTPNDC*;BTPNDB$DB*)
| Table 1 |
| Reply Code (AB22) | Reply |
| C | NOT PROVIDED |
| B | PROVIDED |
BTPP*DGLUE TYPE ACCOMMODATED
INDICATES THE TYPE OF GLUE THE ITEM WILL ACCOMMODATE.
Enter the applicable reply code from the table below
(BTPPDADC)
| Table 1 |
| Reply Code (AK54) | Reply |
| ADA | DRY |
| ADC | WET |
BTPQ*DHEATING ELEMENT LOCATION
INDICATES THE LOCATION OF THE HEATING ELEMENT(S) ON THE ITEM.
Enter the applicable reply code from the table below
(BTPQDAEG)
| Table 1 |
| Reply Code (AJ91) | Reply |
| A | ANY ACCEPTABLE |
| BEL | BACK SIDE |
| ABA | BOTTOM |
| BGT | EMBEDDED |
| BEN | FRONT SIDE |
| BGW | HEAD END |
| BGX | IMMERSED |
| ABH | INSIDE |
| BGY | LEFT END SURFACE |
| AEG | LEFT HAND SIDE |
| BRC | ONE AT EACH END |
| ARZ | OUTSIDE |
| BGZ | POINTED END |
| AKP | REMOTE |
| BHA | RIGHT END SURFACE |
| AEQ | RIGHT HAND SIDE |
| BHB | SELF-CONTAINED |
| ABD | TOP |
AXQD*JCAPACITY
A MEASUREMENT OF THE CAPACITY OF AN ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AXQDJAR2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| CC | LITERS |
| AR | PINTS |
| AT | QUARTS |
BTPR*DTHERMOSTAT CONTROL ADJUSTABILITY
AN INDICATION OF WHETHER OR NOT THE THERMOSTAT CONTROL IS ADJUSTABLE.
Enter the applicable reply code from the table below
(BTPRDC)
| Table 1 |
| Reply Code (AB00) | Reply |
| A | ADJUSTABLE |
| C | NONADJUSTABLE |
ABNRAHEAT QUANTITY
THE NUMBER OF HEATS AT WHICH THE ITEM WILL OPERATE.
Enter the numeric reply with a minimum of one digit.
(ABNRA10*)
BTPSDLADLE
AN INDICATION OF WHETHER OR NOT A LADLE IS PROVIDED.
Enter the applicable reply code from the table below
(BTPSDC)
| Table 1 |
| Reply Code (AB22) | Reply |
| C | NOT PROVIDED |
| B | PROVIDED |
IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC ACDC, YOU MUST ANSWER MRC (ACZB and FAAZ)
ACDCDCURRENT TYPE
INDICATES THE TYPE OF CURRENT WHETHER ALTERNATING,DIRECT,OR BOTH.
Enter the applicable reply code from the table below
(ACDCDC*;ACDCDB$DC*)
| Table 1 |
| Reply Code (AB62) | Reply |
| B | AC |
| C | DC |
ACZB*JFREQUENCY RATING
THE NUMBER OF COMPLETE CYCLIC CHANGES,PER UNIT OF TIME,FOR WHICH AN ITEM IS RATED.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACZBJKC2.0*;ACZBJKC2.0$$JKC2.1*)
| Table 1 |
| Reply Code (AC32) | Reply |
| E | HERTZ |
| K | KILOHERTZ |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
FAAZ*DPHASE
THE NUMBER OF ALTERNATING CURRENT PHASES.
Enter the applicable reply code from the table below
(FAAZDA*;FAAZDC$DB*)
| Table 1 |
| Reply Code (AD02) | Reply |
| A | SINGLE |
| C | THREE |
| B | TWO |
AMSEJVOLTAGE RATING
THE VALUE(S) OF POTENTIAL FOR WHICH THE ITEM IS RATED.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AMSEJKC2.0*;AMSEJKC2.0$JKC2.0*;AMSEJKC2.0$$JKC2.1*)
| Table 1 |
| Reply Code (AB63) | Reply |
| K | KILOVOLTS |
| V | VOLTS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJCB*DHAZARD PROTECTION FEATURE
THE FEATURE INHERENT IN OR DESIGNED INTO THE ITEM AS PROTECTION AGAINST RISKS ENCOUNTERED DURING USAGE.
Enter the applicable reply code from the table below
(AJCBDAAA*;AJCBDCU$DCT*;AJCBDCU$$DCT*)
| Table 1 |
| Reply Code (AA65) | Reply |
| AAA | ELECTRICALLY INSULATED UP TO 1000 VOLTS |
| CT | NONMAGNETIC |
| CU | NONSPARKING |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDCHH*;CBBLDCHG$$DBKW*)
| Table 1 |
| Reply Code (AN47) | Reply |
| CHG | ADAPTER PLATE |
| EVQ | COIL SPRING |
| BKR | ELECTRICALLY INSULATED |
| EVN | ELECTRICALLY INSULATED UP TO 1000 VOLTS |
| CHH | GAUGE |
| EUU | GRIP HANDLE |
| CHJ | HYDRAULIC PUMP |
| CAD | MAGAZINE |
| BKW | NONMAGNETIC |
| AHJ | NONSPARKING |
| AMH | TAMPER PROOF |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAC8)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAE8)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.
(NTRDA80-05-28*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(ZZZPJ81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information