An item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes:ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
ISAC Reply 3AEE added to MRC AELR.
ISAC Reply 3BBX added to MRC AELR.
ISAC Reply 3BBY added to MRC AELR.
ISAC Reply 3BBZ added to MRC AELR.
ISAC Reply 3BCA added to MRC AELR.
ISAC Reply 3BCB added to MRC AELR.
ISAC Reply 3BCG added to MRC AELR.
ISAC Reply 3BCH added to MRC AELR.
ISAC Reply 3HOU added to MRC AELR.
ISAC Reply 1A deleted from MRC AELR.
ISAC Reply 1B deleted from MRC AELR.
ISAC Reply 1C deleted from MRC AELR.
ISAC Reply 1D deleted from MRC AELR.
ISAC Reply 1E deleted from MRC AELR.
ISAC Reply 1F deleted from MRC AELR.
ISAC Reply 1G deleted from MRC AELR.
ISAC Reply 1H deleted from MRC AELR.
ISAC Reply 1J deleted from MRC AELR.
ISAC Reply 1K deleted from MRC AELR.
ISAC Reply 1L deleted from MRC AELR.
ISAC Reply 1M deleted from MRC AELR.
ISAC Reply 1N deleted from MRC AELR.
ISAC Reply 1P deleted from MRC AELR.
ISAC Reply 1Q deleted from MRC AELR.
ISAC Reply 3AEE added to MRC AELS.
ISAC Reply 3BBX added to MRC AELS.
ISAC Reply 3BBY added to MRC AELS.
ISAC Reply 3BBZ added to MRC AELS.
ISAC Reply 3BCA added to MRC AELS.
ISAC Reply 3BCB added to MRC AELS.
ISAC Reply 3BCC added to MRC AELS.
ISAC Reply 3BCD added to MRC AELS.
ISAC Reply 3BCE added to MRC AELS.
ISAC Reply 3BCF added to MRC AELS.
ISAC Reply 3BCG added to MRC AELS.
ISAC Reply 3BCH added to MRC AELS.
ISAC Reply 3HOU added to MRC AELS.
ISAC Reply 1A deleted from MRC AELS.
ISAC Reply 1B deleted from MRC AELS.
ISAC Reply 1C deleted from MRC AELS.
ISAC Reply 1D deleted from MRC AELS.
ISAC Reply 1E deleted from MRC AELS.
ISAC Reply 1F deleted from MRC AELS.
ISAC Reply 1G deleted from MRC AELS.
ISAC Reply 1H deleted from MRC AELS.
ISAC Reply 1J deleted from MRC AELS.
ISAC Reply 1K deleted from MRC AELS.
ISAC Reply 1L deleted from MRC AELS.
ISAC Reply 1M deleted from MRC AELS.
ISAC Reply 1N deleted from MRC AELS.
ISAC Reply 1P deleted from MRC AELS.
ISAC Reply 1Q deleted from MRC AELS.
ISAC Reply 3AEE added to MRC ACUV.
ISAC Reply 3BBX added to MRC ACUV.
ISAC Reply 3BBY added to MRC ACUV.
ISAC Reply 3BBZ added to MRC ACUV.
ISAC Reply 3BCA added to MRC ACUV.
ISAC Reply 3BCB added to MRC ACUV.
ISAC Reply 3BCG added to MRC ACUV.
ISAC Reply 3BCH added to MRC ACUV.
ISAC Reply 3HOU added to MRC ACUV.
ISAC Reply 1A deleted from MRC ACUV.
ISAC Reply 1B deleted from MRC ACUV.
ISAC Reply 1C deleted from MRC ACUV.
ISAC Reply 1D deleted from MRC ACUV.
ISAC Reply 1E deleted from MRC ACUV.
ISAC Reply 1F deleted from MRC ACUV.
ISAC Reply 1G deleted from MRC ACUV.
ISAC Reply 1H deleted from MRC ACUV.
ISAC Reply 1J deleted from MRC ACUV.
ISAC Reply 1K deleted from MRC ACUV.
ISAC Reply 1L deleted from MRC ACUV.
ISAC Reply 1M deleted from MRC ACUV.
ISAC Reply 1N deleted from MRC ACUV.
ISAC Reply 1P deleted from MRC ACUV.
ISAC Reply 1Q deleted from MRC ACUV.
ISAC Reply 3AAT added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3BBL added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 1A deleted from MRC MATT.
ISAC Reply 1B deleted from MRC MATT.
ISAC Reply 1C deleted from MRC MATT.
ISAC Reply 1D deleted from MRC MATT.
ISAC Reply 3AAT added to MRC MDCL.
ISAC Reply 3AEE added to MRC MDCL.
ISAC Reply 3BBL added to MRC MDCL.
ISAC Reply 3HOU added to MRC MDCL.
ISAC Reply 1A deleted from MRC MDCL.
ISAC Reply 1B deleted from MRC MDCL.
ISAC Reply 1C deleted from MRC MDCL.
ISAC Reply 1D deleted from MRC MDCL.
ISAC Reply 3AAT added to MRC SFTT.
ISAC Reply 3AEE added to MRC SFTT.
ISAC Reply 3HOU added to MRC SFTT.
ISAC Reply 1A deleted from MRC SFTT.
ISAC Reply 1B deleted from MRC SFTT.
ISAC Reply 1D deleted from MRC SFTT.
ISAC Reply 3AAT added to MRC STDC.
ISAC Reply 3AEE added to MRC STDC.
ISAC Reply 3HOU added to MRC STDC.
ISAC Reply 1A deleted from MRC STDC.
ISAC Reply 1B deleted from MRC STDC.
ISAC Reply 1C deleted from MRC STDC.
ISAC Reply 1D deleted from MRC STDC.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED06945*)
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDFNY)
| Table 1 |
| Reply Code (AN47) | Reply |
| FNY | ROHS DIRECTIVE COMPLIANCE |
IF STYLE/REPLY CODE(s) A, B, C, E, T, U, X, LB, LF, LL, LR, TA, TB, UB, XA, LBD, LBL, LRB OR LRL WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABFY and ABHP and ABMK and AELG and AELH)
IF STYLE/REPLY CODE(s) B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, B11, B12, B13, B14, B15, B16, B17, B18, B19, B20, B21, B22, B23, B24, B25, B26, B27, B28, B29, B30, B31, B32, B33, B34, B35, B36, B37, B38, B39, B40, B41, B42, B43, B44, B45, B46, B47, B48, B49, B50, B51, B52, B53, B54, B55, B56, B57, B58, B59, B60, B67 OR B68 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABGL and ABRY and AEJZ)
IF STYLE/REPLY CODE(s) C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C30, C31, C32, C33, C34, C35, C36, C37, C38, C39, C40, C41, C42, C43 OR C44 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAV and AEJZ)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLB15)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAQ1207 | A | OBLONG |
| AAQ1208 | B | OBLONG |
| AAQ1227 | B1 | RECTANGULAR NO ENTRANCE |
| AAQ1236 | B10 | RECTANGULAR 2 ENTRANCES |
| AAQ1237 | B11 | RECTANGULAR 2 ENTRANCES |
| AAQ1238 | B12 | RECTANGULAR 2 ENTRANCES |
| AAQ1239 | B13 | RECTANGULAR 2 ENTRANCES |
| AAQ1240 | B14 | RECTANGULAR 2 ENTRANCES |
| AAQ1241 | B15 | RECTANGULAR 2 ENTRANCES |
| AAQ1242 | B16 | RECTANGULAR 2 ENTRANCES |
| AAQ1243 | B17 | RECTANGULAR 2 ENTRANCES |
| AAQ1244 | B18 | RECTANGULAR 2 ENTRANCES |
| AAQ1245 | B19 | RECTANGULAR 3 ENTRANCES |
| AAQ1228 | B2 | RECTANGULAR 1 ENTRANCE |
| AAQ1246 | B20 | RECTANGULAR 3 ENTRANCES |
| AAQ1247 | B21 | RECTANGULAR 3 ENTRANCES |
| AAQ1248 | B22 | RECTANGULAR 3 ENTRANCES |
| AAQ1249 | B23 | RECTANGULAR 3 ENTRANCES |
| AAQ1250 | B24 | RECTANGULAR 3 ENTRANCES |
| AAQ1251 | B25 | RECTANGULAR 3 ENTRANCES |
| AAQ1252 | B26 | RECTANGULAR 3 ENTRANCES |
| AAQ1253 | B27 | RECTANGULAR 3 ENTRANCES |
| AAQ1254 | B28 | RECTANGULAR 3 ENTRANCES |
| AAQ1255 | B29 | RECTANGULAR 3 ENTRANCES |
| AAQ1229 | B3 | RECTANGULAR 1 ENTRANCE |
| AAQ1256 | B30 | RECTANGULAR 4 ENTRANCES |
| AAQ1257 | B31 | RECTANGULAR 4 ENTRANCES |
| AAQ1258 | B32 | RECTANGULAR 4 ENTRANCES |
| AAQ1259 | B33 | RECTANGULAR 4 ENTRANCES |
| AAQ1260 | B34 | RECTANGULAR 4 ENTRANCES |
| AAQ1261 | B35 | RECTANGULAR 4 ENTRANCES |
| AAQ1262 | B36 | RECTANGULAR 4 ENTRANCES |
| AAQ1263 | B37 | RECTANGULAR 4 ENTRANCES |
| AAQ1264 | B38 | RECTANGULAR 4 ENTRANCES |
| AAQ1265 | B39 | RECTANGULAR 5 ENTRANCES |
| AAQ1230 | B4 | RECTANGULAR 1 ENTRANCE |
| AAQ1266 | B40 | RECTANGULAR 5 ENTRANCES |
| AAQ1267 | B41 | RECTANGULAR 5 ENTRANCES |
| AAQ1268 | B42 | RECTANGULAR 5 ENTRANCES |
| AAQ1269 | B43 | RECTANGULAR 5 ENTRANCES |
| AAQ1270 | B44 | RECTANGULAR 5 ENTRANCES |
| AAQ1271 | B45 | RECTANGULAR 6 ENTRANCES |
| AAQ1272 | B46 | RECTANGULAR 6 ENTRANCES |
| AAQ1273 | B47 | RECTANGULAR 6 ENTRANCES |
| AAQ1274 | B48 | RECTANGULAR 6 ENTRANCES |
| AAQ1275 | B49 | RECTANGULAR 6 ENTRANCES |
| AAQ1231 | B5 | RECTANGULAR 1 ENTRANCE |
| AAQ1276 | B50 | RECTANGULAR 6 ENTRANCES |
| AAQ1277 | B51 | RECTANGULAR 6 ENTRANCES |
| AAQ1278 | B52 | RECTANGULAR 6 ENTRANCES |
| AAQ1279 | B53 | RECTANGULAR 7 ENTRANCES |
| AAQ1280 | B54 | RECTANGULAR 7 ENTRANCES |
| AAQ1281 | B55 | RECTANGULAR 7 ENTRANCES |
| AAQ1282 | B56 | RECTANGULAR 7 ENTRANCES |
| AAQ1283 | B57 | RECTANGULAR 7 ENTRANCES |
| AAQ1284 | B58 | RECTANGULAR 8 ENTRANCES |
| AAQ1285 | B59 | RECTANGULAR 8 ENTRANCES |
| AAQ1232 | B6 | RECTANGULAR 2 ENTRANCES |
| AAQ1286 | B60 | RECTANGULAR 9 ENTRANCES |
| AAQ1287 | B67 | RECTANGULAR 13 ENTRANCES |
| DQ00107 | B68 | RECTANGULAR 7 ENTRANCES |
| AAQ1233 | B7 | RECTANGULAR 2 ENTRANCES |
| AAQ1234 | B8 | RECTANGULAR 2 ENTRANCES |
| AAQ1235 | B9 | RECTANGULAR 2 ENTRANCES |
| AAQ1209 | C | OBLONG |
| AAQ1289 | C1 | ROUND NO. 1 NO ENTRANCES |
| AAQ1298 | C10 | ROUND NO. 10 3 ENTRANCES |
| AAQ1299 | C11 | ROUND NO. 11 2 ENTRANCES |
| AAQ1300 | C12 | ROUND NO. 12 2 ENTRANCES |
| AAQ1301 | C13 | ROUND NO. 13 3 ENTRANCES |
| AAQ1302 | C14 | ROUND NO. 14 4 ENTRANCES |
| AAQ1303 | C15 | ROUND NO. 15 4 ENTRANCES |
| AAQ1304 | C16 | ROUND NO. 16 5 ENTRANCES |
| AAQ1290 | C2 | ROUND NO. 2 1 ENTRANCE |
| AAQ1291 | C3 | ROUND NO. 3 1 ENTRANCE |
| DQ00108 | C30 | ROUND 3 ENTRANCES |
| DQ00109 | C31 | ROUND 3 ENTRANCES |
| DQ00110 | C32 | ROUND 3 ENTRANCES |
| DQ00111 | C33 | ROUND 2 ENTRANCES |
| DQ00112 | C34 | ROUND 2 ENTRANCES |
| DQ00113 | C35 | ROUND 3 ENTRANCES |
| DQ00114 | C36 | ROUND 3 ENTRANCES |
| DQ00115 | C37 | ROUND 3 ENTRANCES |
| DQ00116 | C38 | ROUND 3 ENTRANCES |
| DQ00117 | C39 | ROUND 4 ENTRANCES |
| AAQ1292 | C4 | ROUND NO. 4 2 ENTRANCES |
| DQ00118 | C40 | ROUND 4 ENTRANCES |
| DQ00119 | C41 | ROUND 4 ENTRANCES |
| DQ00120 | C42 | ROUND 4 ENTRANCES |
| DQ00121 | C43 | ROUND 4 ENTRANCES |
| DQ00122 | C44 | ROUND 5 ENTRANCES |
| AAQ1293 | C5 | ROUND NO. 5 2 ENTRANCES |
| AAQ1294 | C6 | ROUND NO. 6 3 ENTRANCES |
| AAQ1295 | C7 | ROUND NO. 7 3 ENTRANCES |
| AAQ1296 | C8 | ROUND NO. 8 2 ENTRANCES |
| AAQ1297 | C9 | ROUND NO. 9 3 ENTRANCES |
| AAQ1210 | E | OBLONG |
| AAQ1214 | LB | OBLONG |
| AAQ1222 | LBD | OBLONG |
| AAQ1223 | LBL | OBLONG |
| AAQ1215 | LF | OBLONG |
| AAQ1216 | LL | OBLONG |
| AAQ1217 | LR | OBLONG |
| AAQ1224 | LRB | OBLONG |
| AAQ1225 | LRL | OBLONG |
| AAQ1211 | T | OBLONG |
| AAQ1218 | TA | OBLONG |
| AAQ1219 | TB | OBLONG |
| AAQ1212 | U | OBLONG |
| AAQ1220 | UB | OBLONG |
| AAQ1213 | X | OBLONG |
| AAQ1221 | XA | OBLONG |
ABFY*JOVERALL DEPTH
AN OVERALL MEASUREMENT BETWEEN SPECIFIED POINTS OF AN ITEM,IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABFYJAA2.0*;ABFYJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGL*JWIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGLJAA2.0*;ABGLJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAB2.0*;ABHPJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAC2.0*;ABMKJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABRY*JLENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRYJAA2.0*;ABRYJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAA2.0*;ADAVJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEJZ*JDEPTH
A LINEAR MEASUREMENT FROM THE SURFACE TO A SPECIFIED INNER POINT ON AN ITEM,IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEJZJAA2.0*;AEJZJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AELG*JCOVER OPENING LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AELGJAC2.0*;AELGJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AELH*JCOVER OPENING WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AELHJAB2.0*;AELHJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AELJ*JCOVER OPENING DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AELJJAA2.0*;AELJJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) AB, AC, AD, AE, AF, AG, AJ, AK, AL, AM OR AN WERE ENTERED FOR MRC AELR, YOU MUST ANSWER MRC (AELS and ACUV)
AELR*DCONDUIT ENTRANCE TYPE
INDICATES THE TYPE OF ENTRANCE(S) PROVIDED TO ACCOMMODATE THE CONDUIT.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AELR3BCGDAC*;AELR3BCGDAC$DAN*;AELR3BCGDAC$$DAN*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BBX | A ENTRANCE |
| 3BBY | B ENTRANCE |
| 3BBZ | C ENTRANCE |
| 3BCA | D ENTRANCE |
| 3BCB | E ENTRANCE |
| 3BCG | ALL ENTRANCE |
| 3BCH | SINGLE ENTRANCE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD17) | Reply |
| AB | BOSS DRILLED |
| AC | BOSS DRILLED AND TAPPED |
| AD | BOSS DRILLED, TAPPED AND PLUGGED |
| AE | BOX BODY DRILLED |
| AF | BOX BODY DRILLED AND TAPPED |
| AG | BOX BODY DRILLED, TAPPED AND PLUGGED |
| AH | HUB BLANK |
| AJ | HUB DRILLED |
| AK | HUB DRILLED AND TAPPED |
| AN | HUB DRILLED, EXTERNALLY THREADED FOR NUT AND COMPRESSION RING |
| AM | HUB DRILLED, EXTERNALLY THREADED FOR NUT AND SLEEVE |
| AL | HUB DRILLED, TAPPED AND PLUGGED |
| AS | KNOCKOUTS |
Reference NotesRefer to Reference Drawings for assitance in answering this MRC.
AELS*DCONDUIT TYPE ACCOMMODATED
INDICATES THE TYPE OF CONDUIT WHICH THE ITEM IS DESIGNED TO ACCOMMODATE.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AELS3BCADM*;AELS3BCADM$DC*;AELS3BCADM$$DC*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BBX | A ENTRANCE |
| 3BBY | B ENTRANCE |
| 3BBZ | C ENTRANCE |
| 3BCA | D ENTRANCE |
| 3BCB | E ENTRANCE |
| 3BCC | G ENTRANCE |
| 3BCD | H ENTRANCE |
| 3BCE | J ENTRANCE |
| 3BCF | K ENTRANCE |
| 3BCG | ALL ENTRANCE |
| 3BCH | SINGLE ENTRANCE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC23) | Reply |
| A | FLEXIBLE METALLIC |
| B | FLEXIBLE NONMETALLIC |
| M | NONMETALLIC |
| G | RIGID |
| D | RIGID METALLIC THICKWALL |
| C | RIGID METALLIC THINWALL |
| E | RIGID NONMETALLIC |
| K | THICKWALL |
ACUV*JCONDUIT TRADE SIZE ACCOMMODATED
THE STANDARD NOMINAL SIZE DESIGNATION THAT INDICATES THE SPECIFIC ACTUAL INSIDE DIAMETER OF THE CONDUIT.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACUV3BCAJA2.0*;ACUV3BCAJA2.0$JA2.0*;ACUV3BCAJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BBX | A ENTRANCE |
| 3BBY | B ENTRANCE |
| 3BBZ | C ENTRANCE |
| 3BCA | D ENTRANCE |
| 3BCB | E ENTRANCE |
| 3BCG | ALL ENTRANCE |
| 3BCH | SINGLE ENTRANCE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AELU*ATRADE DESIGNATION
THE DESIGNATION BY WHICH THE ITEM IS IDENTIFIED THROUGHOUT INDUSTRY.
Enter the alpha-numeric reply with a minimum of one character.
(AELUAX4)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AEEDSTB000*;MATT3AEEDSTB000$DPCJ000*;MATT3AEEDSTB000$$DPCJ000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3BBL | COVER |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL0029 | ALUMINUM ALLOY 360.0 |
| AL0031 | ALUMINUM ALLOY 380.0 |
| AL0054 | ALUMINUM ALLOY 383.0 |
| AL0032 | ALUMINUM ALLOY 384.0 |
| AL0027 | ALUMINUM ALLOY 413.0 |
| AL0044 | ALUMINUM ALLOY 443.0 |
| AL0050 | ALUMINUM ALLOY 518.0 |
| AL0052 | ALUMINUM ALLOY A360.0 |
| AL0028 | ALUMINUM ALLOY A380.0 |
| AL0030 | ALUMINUM ALLOY A413.0 |
| AL0008 | ALUMINUM ALLOY C443.0 |
| ALC000 | ALUMINUM-COPPER FREE |
| FEA000 | IRON |
| FEF000 | IRON ALLOY |
| FEB000 | IRON CAST |
| FE0046 | IRON CAST UNS F12101 |
| FEC000 | IRON MALLEABLE |
| PCE000 | PLASTIC ALKYD |
| PCJ000 | PLASTIC MELAMINE |
| PCN000 | PLASTIC PHENOLIC |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3BBL | COVER |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3AATDCDA000*;SFTT3AATDCDA000$DZNA000*;SFTT3AATDCDA000$$DZNA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (SF01) | Reply |
| CDA000 | CADMIUM |
| ZNA000 | ZINC |
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
IF STYLE/REPLY CODE(s) AKY WERE ENTERED FOR MRC AELV, YOU MUST ANSWER MRC (AELW and AELY)
AELV*DCOVER MOUNTING METHOD
THE MEANS BY WHICH THE COVER IS ATTACHED.
Enter the applicable reply code from the table below
(AELVDACL)
| Table 1 |
| Reply Code (AB89) | Reply |
| ACW | CLIP FASTENER |
| ACL | EXTERNAL THREADED |
| ACM | INTERNAL THREADED |
| ALA | SELF-RETAINING FASTENER |
| AKY | THREADED FASTENER |
| AKZ | THREADED FASTENER W/WEDGENUT |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
AELW*ACOVER MOUNTING HOLE QUANTITY
THE NUMBER OF HOLES PROVIDED TO ATTACH THE COVER.
Enter the numeric reply with a minimum of one digit.
(AELWA10*)
AELY*LCOVER MOUNTING HOLE ARRANGEMENT STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE ARRANGEMENT OF THE COVER MOUNTING HOLES.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AELYLF1*;AELYLF3$$LF2*)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAQ1308 | F1 | LINE |
| AAQ1309 | F2 | DIAGONAL |
| AAQ1310 | F3 | DIAMOND |
| AAQ1311 | F4 | CIRCULAR |
| AAQ1312 | F5 | RECTANGULAR |
AEMR*AWIRING DEVICE GANG QUANTITY
THE NUMBER OF STANDARD SIZED WIRING DEVICES ACCOMMODATED.
Enter the numeric reply with a minimum of one digit.
(AEMRA10*)
AEMS*DMULTIGANG OUTLET PARTITIONING METHOD
THE MEANS BY WHICH THE MULTIGANG OUTLETS ARE SEPARATED.
Enter the applicable reply code from the table below
(AEMSDC)
| Table 1 |
| Reply Code (AD19) | Reply |
| B | PARALLEL |
| C | TANDEM |
AEMTDCOVER MOUNTING SURFACE TYPE
INDICATES THE TYPE OF MOUNTING SURFACE ON THE COVER.
Enter the applicable reply code from the table below
(AEMTDB)
| Table 1 |
| Reply Code (AD20) | Reply |
| B | FLAT |
| D | GROOVED |
| C | RIDGED |
AEMU*DCOVER MOUNTING GASKET TYPE
INDICATES THE TYPE OF MOUNTING GASKET PROVIDED FOR THE COVER.
Enter the applicable reply code from the table below
(AEMUDC*;AEMUDB$DD*)
| Table 1 |
| Reply Code (AA83) | Reply |
| B | OPEN CENTER |
| D | O-RING |
| C | SOLID CENTER |
AEMW*ACOVER QUANTITY
THE NUMBER OF COVERS FURNISHED WITH THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AEMWA10*)
AEMX*LFUNCTIONAL COVER STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE FUNCTIONAL COVER.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AEMXLE3*;AEMXLE22$$LE7*)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAQ1317 | E1 | BLANK |
| AAQ1326 | E10 | DUPLEX RECEPTACLE |
| AAQ1327 | E11 | TOGGLE SWITCH W/DUPLEX RECEPTACLE |
| AAQ1328 | E14 | ENTRANCE HUB INTERNAL THREAD |
| AAQ1329 | E15 | EXTERNAL OPERATION TOGGLE SWITCH |
| AAQ1330 | E16 | EXTERNAL OPERATION SINGLE PUSH BUTTON SWITCH |
| AAQ1331 | E17 | EXTERNAL OPERATION DOUBLE PUSH BUTTON SWITCH |
| AAQ1332 | E18 | 90 DEGREE HUB, INTERNAL THREAD |
| AAQ1333 | E19 | WIRE OUTLET |
| AAQ1318 | E2 | DOUBLE PUSH BUTTON SWITCH |
| AAQ1334 | E21 | FLUSH, EXTERNAL THREAD MOUNTED |
| AAQ1335 | E22 | SURFACE EXTERNAL THREAD MOUNTED |
| AAQ1336 | E25 | SURFACE, INTERNAL THREAD MOUNTED |
| AAQ1319 | E3 | TOGGLE SWITCH |
| AAQ1320 | E4 | SINGLE INTERCHANGEABLE DEVICE |
| AAQ1321 | E5 | DOUBLE INTERCHANGEABLE DEVICE |
| AAQ1322 | E6 | TRIPLE INTERCHANGEABLE DEVICE |
| AAQ1323 | E7 | ROUND FLUSH RECEPTACLE |
| AAQ1324 | E8 | ROUND RECEPTACLE W/HINGED LID |
| AAQ1325 | E9 | ROUND RECEPTACLE W/THREADED CAP |
AXGY*DMOUNTING METHOD
THE MEANS OF ATTACHING THE ITEM.
Enter the applicable reply code from the table below
(AXGYDAQE)
| Table 1 |
| Reply Code (AM39) | Reply |
| AQE | FLANGE W/HOLE |
| ACP | HOLE |
| BRE | LUG W/HOLE |
ABFEDHAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION
THE SPECIFIC COMMERCIAL RATING WHICH CLASSES THE ITEM AS TO WHAT DEGREE THE ITEM WILL WITHSTAND ENVIRONMENTAL ELEMENTS AND/OR HAZARDOUS LOCATIONS.
Enter the applicable reply code from the table below
(ABFEDEG*;ABFEDAF$$DCN*)
| Table 1 |
| Reply Code (AB27) | Reply |
| AA | ACID RESISTANT |
| BM | BUREAU OF MINES EXPLOSION PROOF-NEMA TYPE 10 |
| AB | CEMENT TIGHT |
| FW | CONDENSATION PROOF |
| ED | CORROSION PROOF |
| AC | DRIPTIGHT-NEMA TYPE 2 |
| EH | DUST-IGNITION PROOF |
| CF | DUSTPROOF |
| AD | DUSTPROOF-NEMA TYPE 13 |
| DY | DUSTTIGHT |
| AE | DUSTTIGHT-NEMA TYPE 5 |
| FC | ELECTROMAGNETIC RADIATION SUPPRESSIVE |
| CE | EXPLOSION PROOF |
| AF | EXPLOSION PROOF NEC CL.I, GP.ABCD;CL.II, GP.EFG;CL.III |
| AH | EXPLOSION PROOF NEC CL.I, GP.BC;CL.II, GP.EFG;CL.III |
| AG | EXPLOSION PROOF NEC CL.I, GP.BCD;CL.II, GP.EFG;CL.III |
| AJ | EXPLOSION PROOF NEC CL.I, GP.CD;CL.II, GP.EFG;CL.III |
| AL | EXPLOSION PROOF NEC CL.I, GP.D;CL.II, GP.EFG |
| AK | EXPLOSION PROOF NEC CL.I, GP.D;CL.II, GP.EFG;CL.III |
| AM | EXPLOSION PROOF NEC CL.I, GP.D;CL.II, GP.G |
| AN | EXPLOSION PROOF NEC CL.II, GP.EFG;CL.III |
| AT | GASTIGHT |
| AP | GENERAL PURPOSE-NEMA TYPE 1 |
| DV | MOISTURE PROOF |
| N | NOT RATED |
| CJ | OILTIGHT |
| AQ | OILTIGHT-NEMA TYPE 11 |
| FB | RADIO FREQUENCY RADIATION SUPPRESSIVE |
| EM | RAINTIGHT |
| AR | RAINTIGHT-NEMA TYPE 3R |
| DZ | SUBMERSIBLE |
| AS | SUBMERSIBLE-NEMA TYPE 6 |
| ES | VAPORTIGHT |
| CN | WATERTIGHT |
| AU | WATERTIGHT-NEMA TYPE 4 |
| EG | WEATHER RESISTANT |
| DX | WEATHERPROOF |
| AV | WEATHERPROOF-NEMA TYPE 3 |
ABFF*DFURNISHED ITEMS
ITEMS FURNISHED AS ACCESSORIES WHICH ARE NOT SPECIFIED ELSEWHERE.
Enter the applicable reply code from the table below
(ABFFDAPF*;ABFFDAKJ$$DAPL*)
| Table 1 |
| Reply Code (AB28) | Reply |
| APF | ADJUSTABLE WIRING DEVICE MOUNTING STRAP |
| AMM | CHAIN |
| APG | COMBINATION DRAIN FITTING-VENT VALVE |
| APH | COVER MOUNTING SCREW |
| AKJ | DRAIN FITTING |
| ACN | GASKET |
| APJ | MOUNTING PLATE |
| APK | NONADJUSTABLE WIRING DEVICE MOUNTING STRAP |
| AEA | PLUG |
| APL | POSITION LOCKING DEVICE |
| AFJ | SETSCREW |
| ALD | SPRING COVER |
| APM | THREADED CAP |
| APN | VENT VALVE |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCF2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
| CD | CUBIC DECIMETERS |
| CF | CUBIC FEET |
| CN | CUBIC INCHES |
| CM | CUBIC METERS |
BBRG*DSTORAGE TYPE
INDICATES THE TYPE OF STORAGE SPACE REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(BBRGDAE*;BBRGDAL$DAN*)
| Table 1 |
| Reply Code (AM81) | Reply |
| AC | CLOSED SHED |
| AD | CONTROLLED HUMIDITY WAREHOUSE |
| AM | DEHUMIDIFIED WAREHOUSE |
| AE | GENERAL PURPOSE WAREHOUSE |
| AN | HEATED WAREHOUSE |
| AH | OPEN SHED |
| AL | TEMPERATURE CONTROLLED WAREHOUSE |
| AJ | UNHEATED WAREHOUSE |
BBRH*JINSPECTION FREQUENCY
THE SPECIFIED TIME INTERVAL,FROM RECEIPT,NECESSARY TO DETECT MATERIAL DETERIORATION THAT WILL AFFECT STOCK READINESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit.
(BBRHJDYAC2*;BBRHJDYAC2$$JDYAC3*)
| Table 1 |
| Reply Code (AH68) | Reply |
| DY | DAYS |
| MH | MONTHS |
| YR | YEARS |
| Table 2 |
| Reply Code (AM82) | Reply |
| AB | FIRST INSPECTION |
| AC | REINSPECTION |
AFJN*DFRAGILITY FACTOR
THE MEASURE OF SENSITIVITY OF THE ITEM TO BE PACKAGED. A FACTOR USED BY PACKAGING ENGINEERS IN DEVISING PROPER CUSHIONING IN A PACKAGE.
Enter the applicable reply code from the table below
(AFJNDE)
| Table 1 |
| Reply Code (AD40) | Reply |
| D | DELICATE |
| B | EXTREMELY FRAGILE |
| E | MODERATELY DELICATE |
| F | MODERATELY RUGGED |
| G | RUGGED |
| C | VERY DELICATE |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ052*;HZRDDHAZ008$$DHAZ042*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ042 | ASBESTOS |
| HAZ008 | CADMIUM |
| HAZ052 | ZINC |
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)