A caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

FSC Information

5340	Hardware, Commercial

Colloquial Information

K5575

LIGHT DUTY CASTER

Change List

MRC PDNB has been added

MRC ZZZP has been deleted

NAMEDITEM NAME

NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.

Enter the item name code.

(NAMED06187*)

MATTDMATERIAL

THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.

Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2

(MATT3ADODSTA000*;MATT3ADODSTA000$DALA000*;MATT3ADODSTA000$$DALA000*)

Table 1
	ISAC Field Indicator (5000)	Location
	3AAT	BODY
	3ACW	FRAME
	3ADO	PLATE
	3AEE	OVERALL
	3CZW	TIRE
	3EVG	TREAD
	3HOU	LOCATION NOT OTHERWISE SPECIFIED
	3IAV	WHEEL RIM

Table 2
	Reply Code (MA01)	Reply
	ALA000	ALUMINUM
	ALB000	ALUMINUM ALLOY
	CUB000	COPPER ALLOY
	FBA000	FIBER
	FEA000	IRON
	FEB000	IRON CAST
	FEC000	IRON MALLEABLE
	PCA000	PLASTIC
	PCN000	PLASTIC PHENOLIC
	PCP000	PLASTIC POLYAMIDE
	PCAC00	PLASTIC POLYPROPYLENE
	PCAF00	PLASTIC POLYTETRAFLUOROETHYLENE
	PCAH00	PLASTIC POLYURETHANE
	PCBA00	PLASTIC URETHANE
	RCE000	RUBBER
	RC0020	RUBBER POLYISOPRENE NATURAL CLASS NR
	RCB000	RUBBER SYNTHETIC
	STA000	STEEL
	ST1010	STEEL COMP 1010
	ST1020	STEEL COMP 1020
	ST1045	STEEL COMP 1045
	STB000	STEEL CORROSION RESISTING
	ZNB000	ZINC

ALSC*JSAFE OPERATING LOAD RATING

THE SAFE OPERATING LOAD FOR WHICH THE ITEM IS DESIGNED TO ACCOMMODATE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ALSCJGMC2.0*;ALSCJGMC2.0$$JGMC2.1*)

Table 1
	Reply Code (AB16)	Reply
	GM	GRAMS
	KL	KILOGRAMS
	OZ	OUNCES
	LB	POUNDS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

IF STYLE/REPLY CODE(s) 10 OR 11 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CBZT and BCDX and BRHQ and CCBH)

IF STYLE/REPLY CODE(s) 5, 6 OR 9 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ALYX and CBZR and BCDX and BRHQ and CCBH)

IF STYLE/REPLY CODE(s) 1, 2, 3, 4, 7 OR 8 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CBZT and BCDX and BRHQ and CCBH)

STYLLSTYLE DESIGNATOR

THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.

Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.

(STYLL3)

Table 1
Physical Drawing ID	Reply Code (STYL)	Reply
AAK1302	1	RIGID
AAK1311	10	SWIVEL OFFSET-BALL TYPE
AAK1312	11	ANGLE WHEEL TYPE
AAK1303	2	SWIVEL OFFSET
AAK1304	3	SWIVEL NONOFFSET
AAK1305	4	RIGID
AAK1306	5	RIGID
AAK1307	6	SWIVEL OFFSET
AAK1308	7	RIGID
AAK1309	8	SWIVEL OFFSET
AAK1310	9	SWIVEL OFFSET-BALL TYPE

BCDX*JWHEEL DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE WHEEL,AND TERMINATES AT THE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BCDXJAA2.0*;BCDXJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CCBH*JTREAD WIDTH

A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE TREAD,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CCBHJAA2.0*;CCBHJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

BRHQ*JEFFECTIVE HEIGHT

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BRHQJAC2.0*;BRHQJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

IF STYLE/REPLY CODE(s) 13 WERE ENTERED FOR MRC ALYX, YOU MUST ANSWER MRC (ALZD and CBZM)

IF STYLE/REPLY CODE(s) 10, 11, 12, 14 OR 16 WERE ENTERED FOR MRC ALYX, YOU MUST ANSWER MRC (ALZD and ALZE)

IF STYLE/REPLY CODE(s) 15 WERE ENTERED FOR MRC ALYX, YOU MUST ANSWER MRC (ALZD and ASDB and CCBK and CCBM and CCSN and CCSP)

IF STYLE/REPLY CODE(s) 17 WERE ENTERED FOR MRC ALYX, YOU MUST ANSWER MRC (ALZD and ASDB and CPTJ and CPTK and CPTL and CPTM)

IF STYLE/REPLY CODE(s) 8 WERE ENTERED FOR MRC ALYX, YOU MUST ANSWER MRC (ALZD and CBZM)

IF STYLE/REPLY CODE(s) 6 WERE ENTERED FOR MRC ALYX, YOU MUST ANSWER MRC (ALZD and ALZE and CCBK and CCSN)

IF STYLE/REPLY CODE(s) 1, 2, 3, 4, 5, 7 OR 9 WERE ENTERED FOR MRC ALYX, YOU MUST ANSWER MRC (ALZD and ALZE)

ALYX*LSTEM STYLE

THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE STEM.

(ALYXL7)

Table 1
Physical Drawing ID	Reply Code (STYL)	Reply
AAK1313	1	GRIPNECK
AAK1322	10	COUNTERSUNK
AAK1323	11	GRIPNECK
AAK1324	12	DRIVE
AAK1325	13	THREADED
AAK1326	14	PLAIN ROUND
AAK1327	15	OCTAGON
AAK1328	16	SNAP RING ROUND
AAK1329	17	SQUARE
AAK1314	2	GRIPNECK
AAK1315	3	FRICTION RING
AAK1316	4	PLAIN
AAK1317	5	COUNTERSUNK PLAIN
AAK1318	6	GRIP RING
AAK1319	7	FRICTION RING
AAK1320	8	EXTERNAL PIPE THREAD
AAK1321	9	COMPENSATING FRICTION RING

ALZD*JSTEM LENGTH

A MEASUREMENT OF THE LONGEST DIMENSION OF A STEM,IN DISTINCTION FROM WIDTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ALZDJAA2.0*;ALZDJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ALZE*JSTEM DIAMETER

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ALZEJAC2.0*;ALZEJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ASDB*JWIDTH ACROSS FLATS

THE SHORTEST STRAIGHT LINE BETWEEN FLATS,PERPENDICULAR TO THE HEIGHT.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ASDBJAA2.0*;ASDBJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CCBK*JSTEM MOUNTING HOLE DIAMETER

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CCBKJAC2.0*;CCBKJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CCBM*JCENTER TO CENTER DISTANCE BETWEEN HOLES ALONG STEM

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CCBMJAA2.0*;CCBMJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CCSN*JBASE STEM DISTANCE TO FIRST HOLE

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CCSNJAA2.0*;CCSNJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CCSP*JFIRST HOLE DISTANCE TO CENTERLINE HOLE

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CCSPJAB2.0*;CCSPJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CPTJ*JLONGEST CENTER TO CENTER DISTANCE BETWEEN HOLES ALONG FIRST STEM LENGTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CPTJJAA2.0*;CPTJJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CPTK*JSHORTEST CENTER TO CENTER DISTANCE BETWEEN HOLES ALONG SECOND STEM LENGTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CPTKJAA2.0*;CPTKJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CPTL*JBASE STEM DISTANCE TO FIRST HOLE ALONG FIRST STEM LENGTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CPTLJAC2.0*;CPTLJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CPTM*JBASE STEM DISTANCE TO FIRST HOLE ALONG SECOND STEM LENGTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CPTMJAB2.0*;CPTMJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

IF STYLE/REPLY CODE(s) NC, NF OR NS WERE ENTERED FOR MRC CBZM, YOU MUST ANSWER MRC (CBZN and CBZP)

IF STYLE/REPLY CODE(s) SJ, SK, SM OR SS WERE ENTERED FOR MRC CBZM, YOU MUST ANSWER MRC (CBZP)

IF STYLE/REPLY CODE(s) NP OR SP WERE ENTERED FOR MRC CBZM, YOU MUST ANSWER MRC (CBZQ)

CBZM*DSTEM THREAD SERIES DESIGNATOR

A DESIGNATION DISTINGUISHING ONE GROUP OF STEM THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.

Enter the applicable reply code from the table below

(CBZMDSJ)

Table 1
	Reply Code (AH06)	Reply
	SM	ISO M
	SS	ISO S
	SP	NPS
	NP	NPT
	SJ	SI
	SK	SI-M
	NC	UNC
	NF	UNF
	NS	UNS

CBZN*ASTEM THREAD QUANTITY PER INCH

A MEASUREMENT OF THE NUMBER OF THREADS ON THE STEM PER LINEAR INCH,INCLUDING INCOMPLETE THREADS,ON A LINE PARALLEL TO THE AXIS.

Enter the alpha-numeric reply with a minimum of one character.

(CBZNAI5)

CBZP*JSTEM THREAD DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE THREADED PORTION OF A STEM,AND TERMINATES AT THE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CBZPJAB2.0*;CBZPJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CBZQ*JSTEM NOMINAL PIPE SIZE DESIGNATOR

THE INDUSTRIAL SIZE DESIGNATION USED TO INDICATE THE DIAMETER OF THE STEM PIPE.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CBZQJA2.0*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

IF STYLE/REPLY CODE(s) 40, 41, 42, 43 OR 44 WERE ENTERED FOR MRC CBZR, YOU MUST ANSWER MRC (CBZS and CCSW and CDLW)

IF STYLE/REPLY CODE(s) 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23 OR 24 WERE ENTERED FOR MRC CBZR, YOU MUST ANSWER MRC (CCSQ and CCSR)

IF STYLE/REPLY CODE(s) 25 WERE ENTERED FOR MRC CBZR, YOU MUST ANSWER MRC (CCSQ and CCSS)

IF STYLE/REPLY CODE(s) 26 WERE ENTERED FOR MRC CBZR, YOU MUST ANSWER MRC (CCSW and CCSR)

IF STYLE/REPLY CODE(s) 39 WERE ENTERED FOR MRC CBZR, YOU MUST ANSWER MRC (CCSW and CDLW and CBZS)

IF STYLE/REPLY CODE(s) 1, 2, 3, 4, 5, 6, 7, 8 OR 9 WERE ENTERED FOR MRC CBZR, YOU MUST ANSWER MRC (CCSQ and CCSR)

CBZR*LSTEM SOCKET STYLE

THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE STEM SOCKET.

(CBZRL12)

Table 1
Physical Drawing ID	Reply Code (STYL)	Reply
AAK1330	1	TOP BEARING
AAK1339	10	TUBULAR
AAK1340	11	TUBULAR
AAK1341	12	TUBULAR
AAK1342	13	TOP BEARING
AAK1343	14	GRIPNECK-OPEN TYPE
AAK1344	15	TUBULAR
AAK1345	16	GRIPNECK-OPEN TYPE
AAK1346	17	GRIPNECK-OPEN TYPE
AAK1347	18	GRIP RING
AAK1348	19	GRIPNECK-OPEN TYPE
AAK1331	2	TOP BEARING
AAK1349	20	TUBULAR
AAK1350	21	GRIP RING
AAK1351	22	GRIP RING
AAK1352	23	GRIP RING
AAK1353	24	GRIP RING
AAK1354	25	GRIP RING
AAK1355	26	SPRING TYPE
AAK1332	3	TOP BEARING
AAK1368	39	PLAIN BEARING
AAK1333	4	TOP BEARING
AAK1369	40	BALL BEARING
AAK1370	41	PLAIN BEARING
AAK1371	42	PLAIN BEARING
AAK1372	43	BALL BEARING
AAK1373	44	INTERNAL PIPE THREAD
AAK1334	5	TOP BEARING
AAK1335	6	TOP BEARING
AAK1336	7	TOP BEARING
AAK1337	8	TOP BEARING
AAK1338	9	TUBULAR

CTJS*JUNPACKAGED UNIT WEIGHT

THE MEASURED WEIGHT OF AN ITEM UNENCUMERED BY PACKAGING OR PACKING MATERIAL.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CTJSJLBC2.0*)

Table 1
	Reply Code (AN75)	Reply
	GM	GRAMS
	KG	KILOGRAMS
	MG	MILLIGRAMS
	OZ	OUNCES
	LB	POUNDS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

SFTT*DSURFACE TREATMENT

THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.

Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2

(SFTT3AEEDCDA000*;SFTT3AEEDCDA000$DXXB000*;SFTT3AEEDCDA000$$DXXB000*)

Table 1
	ISAC Field Indicator (5000)	Location
	3AAT	BODY
	3ACW	FRAME
	3ADO	PLATE
	3AEE	OVERALL
	3HOU	LOCATION NOT OTHERWISE SPECIFIED
	3IAV	WHEEL RIM

Table 2
	Reply Code (SF01)	Reply
	ANA000	ANODIZE
	CDA000	CADMIUM
	CMA000	CHROMATE
	CRA000	CHROMIUM
	ENA000	ENAMEL
	ENF000	ENAMEL SEMIGLOSS
	LQA000	LACQUER
	XXB000	OXIDE
	PNA000	PAINT
	PSA000	PASSIVATE
	PHA000	PHOSPHATE
	ZNA000	ZINC

CBME*JCUBIC MEASURE

A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CBMEJCB2.0*)

Table 1
	Reply Code (AN76)	Reply
	CB	CUBIC MILLIMETERS

ADNY*JDISTANCE BETWEEN HOLES ALONG LENGTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADNYJAB2.0*;ADNYJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADNZ*JDISTANCE BETWEEN HOLES ALONG WIDTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADNZJAC2.0*;ADNZJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CCSQ*JSTEM SOCKET DEPTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CCSQJAB2.0*;CCSQJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CCSR*JSTEM SOCKET DIAMETER

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CCSRJAC2.0*;CCSRJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CCSS*JSTEM SOCKET WIDTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CCSSJAA2.0*;CCSSJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CCSW*JSTEM SOCKET OVERALL HEIGHT

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CCSWJAA2.0*;CCSWJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CDLW*DSTEM SOCKET THREAD SERIES DESIGNATOR

A DESIGNATION INDICATING THE DIAMETER-PITCH AND THE NUMBER OF THREADS PER MEASUREMENT SCALE APPLIED TO A SERIES OF DIAMETERS OF A STEM SOCKET.

Enter the applicable reply code from the table below

(CDLWDNP)

Table 1
	Reply Code (AH06)	Reply
	PL	BSP.PL
	BP	BSP.TR
	SP	NPS
	NP	NPT

CBZS*JSTEM SOCKET NOMINAL PIPE SIZE DESIGNATOR

THE INDUSTRIAL SIZE DESIGNATION USED TO INDICATE THE DIAMETER OF THE STEM SOCKET PIPE.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CBZSJA2.0*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

IF STYLE/REPLY CODE(s) 12 WERE ENTERED FOR MRC CBZT, YOU MUST ANSWER MRC (CCTP and CCTQ and CCTR and CCTS and CCTT and CCTW and CCTZ and CCWB)

IF STYLE/REPLY CODE(s) 10, 11 OR 13 WERE ENTERED FOR MRC CBZT, YOU MUST ANSWER MRC (ADUY and ADUZ and CCTP and CCTQ and CCWC)

IF STYLE/REPLY CODE(s) 14 WERE ENTERED FOR MRC CBZT, YOU MUST ANSWER MRC (ADUZ and CCTP and CCWC)

IF STYLE/REPLY CODE(s) 4 OR 5 WERE ENTERED FOR MRC CBZT, YOU MUST ANSWER MRC (CCTP and CCTQ and CCTR and CCTS and CCTT and CCTW and CCTZ and CCWB)

IF STYLE/REPLY CODE(s) 7 WERE ENTERED FOR MRC CBZT, YOU MUST ANSWER MRC (ADUZ and CCTP and CCTQ and CCWC)

IF STYLE/REPLY CODE(s) 1, 2, 3, 8 OR 9 WERE ENTERED FOR MRC CBZT, YOU MUST ANSWER MRC (ADUY and ADUZ and CCTP and CCTQ and CCWC)

IF STYLE/REPLY CODE(s) 15 WERE ENTERED FOR MRC CBZT, YOU MUST ANSWER MRC (BJTJ and ATPG and CCWC)

IF STYLE/REPLY CODE(s) 17 WERE ENTERED FOR MRC CBZT, YOU MUST ANSWER MRC (CCWC and CCTP and CCTQ and CCTZ and CCWB)

IF STYLE/REPLY CODE(s) 18 WERE ENTERED FOR MRC CBZT, YOU MUST ANSWER MRC (CCTP and CCTQ and CCTR and CCTS and CCTT and CCTW and CCTZ and CCWB)

CBZT*LPLATE STYLE

THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE PLATE.

(CBZTL18)

Table 1
Physical Drawing ID	Reply Code (STYL)	Reply
AAK1374	1	SQUARE
AAK1383	10	SQUARE-COUNTERSUNK ENDS
AAK1384	11	SQUARE-INVERTED V ENDS
AAK1385	12	RECTANGULAR
AAK1386	13	RECTANGULAR
AAK1387	14	OVAL
DQ00700	15	ROUND
DQ00702	17	BEVELED
DR1747	18	RECTANGULAR-COUNTERSUNK ENDS
AAK1375	2	RECTANGULAR
AAK1376	3	SQUARE
AAK1377	4	RECTANGULAR
AAK1378	5	SQUARE
AAK1380	7	RECTANGULAR-INVERTED RADIUS ENDS
AAK1381	8	RECTANGULAR-COUNTERSUNK ENDS
AAK1382	9	SQUARE-BENT ENDS

ADUY*JCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH

A MEASUREMENT OF THE CENTER TO CENTER DISTANCE BETWEEN THE BOLT HOLES ALONG THE WIDTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADUYJAC2.0*;ADUYJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADUZ*JCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH

A MEASUREMENT OF THE CENTER TO CENTER DISTANCE BETWEEN THE BOLT HOLES ALONG THE LENGTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADUZJAA2.0*;ADUZJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ATPG*JPLATE DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A PLATE,AND TERMINATES AT THE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ATPGJAC2.0*;ATPGJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

BJTJ*JBOLT HOLE CIRCLE DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A BOLT HOLE CIRCLE,AND TERMINATES AT THE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BJTJJAB2.0*;BJTJJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CCTP*JCASTER PLATE LENGTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CCTPJAA2.0*;CCTPJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CCTQ*JCASTER PLATE WIDTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CCTQJAA2.0*;CCTQJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CCTR*JCENTER TO CENTER MAJOR DISTANCE BETWEEN MOUNTING SLOTS ALONG LENGTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CCTRJAB2.0*;CCTRJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CCTS*JCENTER TO CENTER MINOR DISTANCE BETWEEN MOUNTING SLOTS ALONG LENGTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CCTSJAB2.0*;CCTSJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CCTT*JCENTER TO CENTER MAJOR DISTANCE BETWEEN MOUNTING SLOTS ALONG WIDTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CCTTJAB2.0*;CCTTJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CCTW*JCENTER TO CENTER MINOR DISTANCE BETWEEN MOUNTING SLOTS ALONG WIDTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CCTWJAB2.0*;CCTWJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CCTZ*JCASTER PLATE MOUNTING SLOT LENGTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CCTZJAC2.0*;CCTZJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CCWB*JCASTER PLATE MOUNTING SLOT WIDTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CCWBJAA2.0*;CCWBJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CCWC*JCASTER PLATE MOUNTING HOLE DIAMETER

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CCWCJAB2.0*;CCWCJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CBZZ*DWHEEL BEARING TYPE

INDICATES THE TYPE OF WHEEL BEARING(S) PROVIDED.

Enter the applicable reply code from the table below

(CBZZDAJ*;CBZZDBA$DAK*)

Table 1
	Reply Code (AH96)	Reply
	AL	ANNULAR BALL
	A	ANY ACCEPTABLE
	AE	BALL
	AN	PIVOT
	AR	PLAIN, SELF-LUBRICATED
	AJ	ROLLER
	AK	SLEEVE
	AQ	TAPERED ROLLER
	BA	THRUST

AGDHAWHEEL QUANTITY

THE NUMBER OF WHEELS INCLUDED ON THE ITEM.

Enter the numeric reply with a minimum of one digit.

(AGDHA10*)

AYMRDWHEEL TYPE

INDICATES THE TYPE OF WHEEL/S/ PROVIDED ON THE ITEM.

Enter the applicable reply code from the table below

(AYMRDBD)

Table 1
	Reply Code (AH67)	Reply
	BC	BALL
	BD	BUILT UP
	AG	PNEUMATIC TIRE
	AH	SEMIPNEUMATIC TIRE
	AE	SOLID
	BE	V-GROOVED

ABJH*JTEMP RATING

A VALUE WHICH EXPRESSES THE DEGREE OF HEAT OR COLD AS APPLIED TO THE OPERATION,OR LIMITATION OF OPERATION,OF AN ITEM.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit as in the first and second examples.For negative temperature values, precede the numeric portion of the reply with the letter “M” as in the third and fourth examples.If ISAC coding is authorized for this requirement and one or more of the temperature values in negative, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.Also precede the numeric portion of the reply with the letter “M” as in the fifth and sixth examples.

(ABJHJF68.0*; ABJHJC0.0$$JC35.0*; ABJHJFCM15.0*; ABJHJFM40.0$$JF75.0*; ABJH1BJFM25.0*; ABJH1BJCM35.0$$JCM5.0*)

Table 1
	Reply Code (AB36)	Reply
	C	CELSIUS
	F	FAHRENHEIT

CBBL*DFEATURES PROVIDED

THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.

Enter the applicable reply code from the table below

(CBBLDAAAK*;CBBLDAAAF$$DAADW*)

Table 1
	Reply Code (AN47)	Reply
	AADT	AXLE LUBRICATION FITTING
	AAGZ	BRACKET
	AAAE	BRAKE LOCK
	AAAF	ELECTRICALLY CONDUCTIVE
	AAHD	EYE BOLT
	AAHE	HEXAGON NUT
	AAHB	RETAINER RING
	AAHC	RETRACTABLE WHEEL
	AAAG	SHOCK ABSORBER
	AAAH	SOLID REPLACEABLE TIRE
	AAAJ	SPACER
	AAAK	SPANNER BUSHING
	AAAL	STEERING ATTACHMENT
	AAAM	SWIVEL LOCK
	AADW	SWIVEL LUBRICATION FITTING
	AAAN	THREAD GUARD
	AAHA	WASHER

FEAT*GSPECIAL FEATURES

THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.

Enter the reply in clear text. Separate multiple replies with a semicolon.

(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)

TEST*JTEST DATA DOCUMENT

THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.

Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.

(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)

Table 1
	Reply Code (AC28)	Reply
	A	SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
	B	STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
	C	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

SPCL*GSPECIAL TEST FEATURES

TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.

Enter the reply in clear text.

(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	Reply Code (AN62)	Reply
	V	FEDERAL MOTOR VEHICLE SAFETY STANDARD
	F	FLAMMABILITY STANDARD
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	U	INTERNATIONAL STD/SPEC
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	B	NATIONAL STD/SPEC
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	BE	ANNEALED
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BF	BOND
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CF	CIRCUMFERENCE
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	AV	CONFIGURATION
	CS	CONSTRUCTION
	BG	CORE CONDITION
	CB	CUT OFF
	AM	DELAY CLASS
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	DU	DUPLEX
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	AK	FILE NUMBER
	FN	FINISH
	FB	FLAVOR
	BH	FLUX PERCENTAGE
	FM	FORM
	FA	FORMULA
	AJ	GAGE STOCK NUMBER
	GR	GRADE
	GA	GRADUATION
	AX	GRANULES
	AY	GRIT
	GB	GROUND
	GP	GROUP
	HA	HEAVY DUTY
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LV	LEVEL
	LT	LIMIT
	MK	MARK
	AA	MARKER
	AD	MASK APERTURE
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	TA	MEDIUM TEMPER
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	AQ	NATURAL
	AU	NON-DELAY CLASS
	NR	NUMBER
	BL	OUTFIT NUMBER
	PA	PARAGRAPH
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	PD	POLISHED
	PB	PRESSURE RATING
	QA	QUALITY
	QB	QUENCHED
	RN	RANGE
	AE	RAPID
	RT	RATING
	RF	REFERENCE NUMBER
	RA	REGULAR DUTY
	BJ	RMA FLUX
	SJ	SALIENT CHARACTERISTICS
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	BD	SERIALIZED
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	AG	SLOW
	TC	SOFT TEMPER
	SK	SOURCE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	AW	STANDARD
	SR	STRAIGHT
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	BK	SUPPORT
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	AZ	UNSERIALIZED
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH

CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY

THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.

Enter the reply in clear text.

(CXCYGLINE PROCESSOR CONTROL BOARD*)

ZZZW*GDEPARTURE FROM CITED DOCUMENT

THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.

Enter the reply in clear text.

(ZZZWGAS MODIFIED BY MATERIAL*)

ZZZX*GDEPARTURE FROM CITED DESIGNATOR

THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.

Enter the reply in clear text.

(ZZZXGAS MODIFIED BY MATERIAL*)

ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS

A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.

Enter the reply in clear text.

(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)

Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.

CRTL*ACRITICALITY CODE JUSTIFICATION

THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.

Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.

(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)

If document availability code B, D, F, OR H, reply to MRC PRPY.

PRPY*APROPRIETARY CHARACTERISTICS

IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.

Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.

(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)

ELRN*GEXTRA LONG REFERENCE NUMBER

A REFERENCE NUMBER EXCEEDING 32 POSITIONS.

Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.

(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)

In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.

ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION

A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.

Enter the Reply Code from the table below.

(ELCDDA*)

Table 1
	Reply Code (AN58)	Reply
	A	ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD

AJAF*JUNPACKAGED UNIT LENGTH

A MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING, IN DISTINCTION FROM WIDTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AJAFJAA2.0*;AJAFJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AJAG*JUNPACKAGED UNIT WIDTH

A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AJAGJAA2.0*;AJAGJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AJAH*JUNPACKAGED UNIT HEIGHT

A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING,IN DISTINCTION FROM DEPTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AJAHJAA2.0*;AJAHJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CCBG*DDISASSEMBLY CAPABILITY

AN INDICATION OF WHETHER OR NOT A DISASSEMBLY CAPABILITY IS PROVIDED.

Enter the applicable reply code from the table below

(CCBGDC)

Table 1
	Reply Code (AB22)	Reply
	C	NOT PROVIDED
	B	PROVIDED

AGEC*DTIRE SIZE

DESIGNATES THE SIZE BY WHICH THE TIRE IS COMMERCIALLY KNOWN AND DESIGNATED.

Enter the applicable reply code from the table below

(AGECDAABZ*;AGECDABJG$DAABK*)

Table 1
	Reply Code (AA27)	Reply
	AAED	10.00-16
	AAEK	10.00-16.5
	AALS	10-1/2X4
	AALK	10X2.00
	AALN	10X2.50
	AALP	10X2.75
	AALQ	10X3.00
	ABJC	10X3.40-5
	AABZ	11.00-12
	AAEE	11.00-16
	AAEL	12.00-16.5
	AAEM	12.40/11.00-16
	AACR	12.50-14
	AAEG	12.50-16
	AALT	12-1/2X4-1/2
	AALL	12X2.00
	AALR	12X3.00
	AAAB	12X5-3
	AAEH	13.50-16
	AALW	14-1/2X5
	AAEJ	15.00-16
	AALX	16X4.00
	AALY	16X4.4
	AABD	16X5.80-8.50
	AABM	17.50X6.25-11
	AABH	19X6.80-10
	AAAC	2.80/2.50-4
	ABJD	2.80/4
	AABN	22X7.25-11.50
	AACS	26X8.0-14
	AAAL	29X13-5
	AAAT	3.00-7
	AAAH	3.40/3.00-5
	AAAW	3.40/3.00-7
	ABJE	3.40/5
	AABP	3.50-12
	ABJF	3.50X6
	AAAR	30X13-6
	AAEF	31X11.50-16
	AAAS	35X15-6
	AABR	4.00-12
	AACT	4.00-15
	AAAY	4.00-7
	AABB	4.00-8
	AABE	4.00-9
	AAAE	4.10/3.50-4
	AAAJ	4.10/3.50-5
	AAAM	4.10/3.50-6
	AABQ	4.80/4.00-12
	AAAD	4.80/4.00-4
	AAAX	4.80/4.00-7
	AABA	4.80/4.00-8
	AABF	4.80/4.00-9
	AABS	5.00-12
	AACW	5.00-15
	AADR	5.00-16
	AAAF	5.00-4
	AAAK	5.00-5
	AABT	5.30/4.50-12
	AAAN	5.30/4.50-6
	AAAZ	5.30/4.50-7
	AADS	5.50-16
	AABC	5.70/5.00-8
	AACX	5.90-15
	AALG	5X1.75
	AABW	6.00-12
	AACB	6.00-13
	AACE	6.00-14
	AADT	6.00-16
	AAAP	6.00-6
	ABJG	6.00X9
	AACY	6.40-15
	AACF	6.45-14
	AABJ	6.50-10
	AACC	6.50-13
	AACZ	6.50-15
	AADW	6.50-16
	AADA	6.70-15
	AADB	6.85-15
	AABX	6.90/6.00-12
	AAAQ	6.90/6.00-6
	AABG	6.90/6.00-9
	AACG	6.95-14
	AALH	6X2.00
	AABY	7.00-12
	AACD	7.00-13
	AADC	7.00-15
	AADX	7.00-16
	AADD	7.10-15
	AACH	7.35-14
	AADE	7.35-15
	AACK	7.50/7.75-14
	AABK	7.50-10
	AACJ	7.50-14
	AADF	7.50-15
	AADY	7.50-16
	AADG	7.60-15
	AACL	7.75-14
	AADH	7.75-15
	AAAG	8.00-4
	AADJ	8.15-15
	AADK	8.20-15
	AALM	8.250
	AACM	8.25-14
	AADL	8.25-15
	AADZ	8.25-16
	AADM	8.45-15
	AACN	8.55-14
	AACP	8.85-14
	AADN	8.85-15
	AACA	8.90-12.50
	AADP	8.90-15
	AALJ	8X2.00
	ABJH	8X2.80-4
	ABJJ	8X3.00-4
	AABL	9.00-10
	AACQ	9.00-14
	AADQ	9.00-15
	AAEA	9.00-16
	AAEC	9.50/9.00-16
	AAQE	9.50-16

BBRG*DSTORAGE TYPE

INDICATES THE TYPE OF STORAGE SPACE REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.

Enter the applicable reply code from the table below

(BBRGDAH)

Table 1
	Reply Code (AM81)	Reply
	AC	CLOSED SHED
	AD	CONTROLLED HUMIDITY WAREHOUSE
	AM	DEHUMIDIFIED WAREHOUSE
	AE	GENERAL PURPOSE WAREHOUSE
	AN	HEATED WAREHOUSE
	AH	OPEN SHED
	AJ	UNHEATED WAREHOUSE

Reply to this MRC in accordance with Volume 3.

AGAV*GEND ITEM IDENTIFICATION

THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.

Enter the reply in clear text.

(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)

SUPP*GSUPPLEMENTARY FEATURES

CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.

Enter the reply in clear text.Separate multiple replies with a semicolon.

(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)

This MRC replaced MRC ZZZP

The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.

PDNB*APURCHASE DESCRIPTION IDENTIFICATION

THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.

Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.

(ZZZPJ81A37-30624A*)

Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.

MDCLJMATERIAL DOCUMENT AND CLASSIFICATION

THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.

Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.

(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)

Table 1
	ISAC Field Indicator (5000)	Location
	3AAT	BODY
	3ACW	FRAME
	3ADO	PLATE
	3AEE	OVERALL
	3CZW	TIRE
	3EVG	TREAD
	3HOU	LOCATION NOT OTHERWISE SPECIFIED
	3IAV	WHEEL RIM

Table 2
	Reply Code (AP33)	Reply
	Q	AEROSPACE MATERIAL SPEC STD
	J	AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
	G	ASSN STD
	A	COMMERCIAL ITEM DESCRIPTION
	K	DEF STAN/SPEC
	B	FED SPEC
	C	FED STD
	L	GOVERNMENT STD/SPEC
	N	INTERNATIONAL STD/SPEC
	F	MFR REF
	D	MIL SPEC
	E	MIL STD
	H	NATIONAL SPEC
	P	NATIONAL STD
	M	NATIONAL STD/SPEC

Table 3
	Reply Code (AP18)	Reply
	M	10TH MATERIAL RESPONSE
	N	11TH MATERIAL RESPONSE
	P	12TH MATERIAL RESPONSE
	Q	13TH MATERIAL RESPONSE
	R	14TH MATERIAL RESPONSE
	S	15TH MATERIAL RESPONSE
	T	16TH MATERIAL RESPONSE
	U	17TH MATERIAL RESPONSE
	W	18TH MATERIAL RESPONSE
	X	19TH MATERIAL RESPONSE
	B	1ST MATERIAL RESPONSE
	Y	20TH MATERIAL RESPONSE
	Z	21ST MATERIAL RESPONSE
	V	22ND MATERIAL RESPONSE
	C	2ND MATERIAL RESPONSE
	D	3RD MATERIAL RESPONSE
	E	4TH MATERIAL RESPONSE
	F	5TH MATERIAL RESPONSE
	H	6TH MATERIAL RESPONSE
	J	7TH MATERIAL RESPONSE
	K	8TH MATERIAL RESPONSE
	L	9TH MATERIAL RESPONSE
	G	ALL MATERIAL RESPONSES
	A	SINGLE MATERIAL RESPONSE

IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)

STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION

THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.

(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)

Table 1
	ISAC Field Indicator (5000)	Location
	3AAT	BODY
	3ACW	FRAME
	3ADO	PLATE
	3AEE	OVERALL
	3HOU	LOCATION NOT OTHERWISE SPECIFIED
	3IAV	WHEEL RIM

Table 2
	Reply Code (AP33)	Reply
	G	ASSN STD
	A	COMMERCIAL ITEM DESCRIPTION
	K	DEF STAN/SPEC
	B	FED SPEC
	C	FED STD
	L	GOVERNMENT STD/SPEC
	N	INTERNATIONAL STD/SPEC
	F	MFR REF
	D	MIL SPEC
	E	MIL STD
	H	NATIONAL SPEC
	P	NATIONAL STD
	M	NATIONAL STD/SPEC

Table 3
	Reply Code (AP39)	Reply
	M	10TH TREATMENT RESPONSE
	N	11TH TREATMENT RESPONSE
	P	12TH TREATMENT RESPONSE
	Q	13TH TREATMENT RESPONSE
	R	14TH TREATMENT RESPONSE
	S	15TH TREATMENT RESPONSE
	B	1ST TREATMENT RESPONSE
	C	2ND TREATMENT RESPONSE
	D	3RD TREATMENT RESPONSE
	E	4TH TREATMENT RESPONSE
	F	5TH TREATMENT RESPONSE
	H	6TH TREATMENT RESPONSE
	J	7TH TREATMENT RESPONSE
	K	8TH TREATMENT RESPONSE
	L	9TH TREATMENT RESPONSE
	G	ALL TREATMENT RESPONSES
	A	SINGLE TREATMENT RESPONSE

CLQL*GCOLLOQUIAL NAME

A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.

Enter the reply in clear text.

(CLQLGWOVEN WIRE CLOTH*)