A valve designed to utilize a valve float which controls the opening or closing of the valve as the valve float is lowered or raised by the level of the fluid being controlled. Excludes:VALVE,FLOAT,WATER CLOSET TANK.
ISAC Reply 3AAT added to MRC MATT.
ISAC Reply 3AAT added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3BAU added to MRC MATT.
ISAC Reply 3BAU added to MRC MATT.
ISAC Reply 3BCM added to MRC MATT.
ISAC Reply 3BCM added to MRC MATT.
ISAC Reply 3BKI added to MRC MATT.
ISAC Reply 3BKI added to MRC MATT.
ISAC Reply 3DLU added to MRC MATT.
ISAC Reply 3DLU added to MRC MATT.
ISAC Reply 3DTD added to MRC MATT.
ISAC Reply 3DTD added to MRC MATT.
ISAC Reply 3DTE added to MRC MATT.
ISAC Reply 3DTE added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 1A deleted from MRC MATT.
ISAC Reply 1B deleted from MRC MATT.
ISAC Reply 1C deleted from MRC MATT.
ISAC Reply 1D deleted from MRC MATT.
ISAC Reply 1E deleted from MRC MATT.
ISAC Reply 1F deleted from MRC MATT.
ISAC Reply 1G deleted from MRC MATT.
ISAC Reply 1X deleted from MRC MATT.
ISAC Reply 3AAT added to MRC MDCL.
ISAC Reply 3AEE added to MRC MDCL.
ISAC Reply 3BAU added to MRC MDCL.
ISAC Reply 3BCM added to MRC MDCL.
ISAC Reply 3BKI added to MRC MDCL.
ISAC Reply 3DLU added to MRC MDCL.
ISAC Reply 3DTD added to MRC MDCL.
ISAC Reply 3DTE added to MRC MDCL.
ISAC Reply 3HOU added to MRC MDCL.
ISAC Reply 1A deleted from MRC MDCL.
ISAC Reply 1B deleted from MRC MDCL.
ISAC Reply 1C deleted from MRC MDCL.
ISAC Reply 1D deleted from MRC MDCL.
ISAC Reply 1E deleted from MRC MDCL.
ISAC Reply 1F deleted from MRC MDCL.
ISAC Reply 1G deleted from MRC MDCL.
ISAC Reply 1X deleted from MRC MDCL.
ISAC Reply 3AEE added to MRC MEDA.
ISAC Reply 3DQX added to MRC MEDA.
ISAC Reply 3DQY added to MRC MEDA.
ISAC Reply 3DQZ added to MRC MEDA.
ISAC Reply 3HOU added to MRC MEDA.
ISAC Reply 1A deleted from MRC MEDA.
ISAC Reply 1B deleted from MRC MEDA.
ISAC Reply 1C deleted from MRC MEDA.
ISAC Reply 1D deleted from MRC MEDA.
ISAC Reply 1E deleted from MRC MEDA.
ISAC Reply 1F deleted from MRC MEDA.
ISAC Reply 3AEE added to MRC CQGM.
ISAC Reply 3DQX added to MRC CQGM.
ISAC Reply 3DQY added to MRC CQGM.
ISAC Reply 3DQZ added to MRC CQGM.
ISAC Reply 3HOU added to MRC CQGM.
ISAC Reply 1A deleted from MRC CQGM.
ISAC Reply 1B deleted from MRC CQGM.
ISAC Reply 1C deleted from MRC CQGM.
ISAC Reply 1D deleted from MRC CQGM.
ISAC Reply 1E deleted from MRC CQGM.
ISAC Reply 1F deleted from MRC CQGM.
ISAC Reply 3AEE added to MRC AEHZ.
ISAC Reply 3DQX added to MRC AEHZ.
ISAC Reply 3DQY added to MRC AEHZ.
ISAC Reply 3DQZ added to MRC AEHZ.
ISAC Reply 3HOU added to MRC AEHZ.
ISAC Reply 1A deleted from MRC AEHZ.
ISAC Reply 1B deleted from MRC AEHZ.
ISAC Reply 1C deleted from MRC AEHZ.
ISAC Reply 1D deleted from MRC AEHZ.
ISAC Reply 1E deleted from MRC AEHZ.
ISAC Reply 1F deleted from MRC AEHZ.
ISAC Reply 3AEE added to MRC AWLS.
ISAC Reply 3AET added to MRC AWLS.
ISAC Reply 3AEU added to MRC AWLS.
ISAC Reply 3AEX added to MRC AWLS.
ISAC Reply 3AIB added to MRC AWLS.
ISAC Reply 3AIC added to MRC AWLS.
ISAC Reply 3HOU added to MRC AWLS.
ISAC Reply 1A deleted from MRC AWLS.
ISAC Reply 1B deleted from MRC AWLS.
ISAC Reply 1C deleted from MRC AWLS.
ISAC Reply 1D deleted from MRC AWLS.
ISAC Reply 1E deleted from MRC AWLS.
ISAC Reply 3AEE added to MRC AHNC.
ISAC Reply 3AEE added to MRC AHNC.
ISAC Reply 3AET added to MRC AHNC.
ISAC Reply 3AET added to MRC AHNC.
ISAC Reply 3AEU added to MRC AHNC.
ISAC Reply 3AEU added to MRC AHNC.
ISAC Reply 3AEX added to MRC AHNC.
ISAC Reply 3AEX added to MRC AHNC.
ISAC Reply 3AIB added to MRC AHNC.
ISAC Reply 3AIB added to MRC AHNC.
ISAC Reply 3HOU added to MRC AHNC.
ISAC Reply 3HOU added to MRC AHNC.
ISAC Reply 1A deleted from MRC AHNC.
ISAC Reply 1B deleted from MRC AHNC.
ISAC Reply 1C deleted from MRC AHNC.
ISAC Reply 1D deleted from MRC AHNC.
ISAC Reply 1E deleted from MRC AHNC.
ISAC Reply 3AEE added to MRC CQRB.
ISAC Reply 3AET added to MRC CQRB.
ISAC Reply 3AEU added to MRC CQRB.
ISAC Reply 3AEX added to MRC CQRB.
ISAC Reply 3HOU added to MRC CQRB.
ISAC Reply 1A deleted from MRC CQRB.
ISAC Reply 1B deleted from MRC CQRB.
ISAC Reply 1C deleted from MRC CQRB.
ISAC Reply 1D deleted from MRC CQRB.
ISAC Reply 1E deleted from MRC CQRB.
ISAC Reply 3AEE added to MRC ARKN.
ISAC Reply 3AET added to MRC ARKN.
ISAC Reply 3AEU added to MRC ARKN.
ISAC Reply 3AEX added to MRC ARKN.
ISAC Reply 3HOU added to MRC ARKN.
ISAC Reply 1A deleted from MRC ARKN.
ISAC Reply 1B deleted from MRC ARKN.
ISAC Reply 1C deleted from MRC ARKN.
ISAC Reply 1D deleted from MRC ARKN.
ISAC Reply 1E deleted from MRC ARKN.
ISAC Reply 3AEE added to MRC CWCD.
ISAC Reply 3AET added to MRC CWCD.
ISAC Reply 3AEU added to MRC CWCD.
ISAC Reply 3AEX added to MRC CWCD.
ISAC Reply 3AIB added to MRC CWCD.
ISAC Reply 3HOU added to MRC CWCD.
ISAC Reply 1A deleted from MRC CWCD.
ISAC Reply 1B deleted from MRC CWCD.
ISAC Reply 1C deleted from MRC CWCD.
ISAC Reply 1D deleted from MRC CWCD.
ISAC Reply 1E deleted from MRC CWCD.
ISAC Reply 3AEE added to MRC CWCK.
ISAC Reply 3AET added to MRC CWCK.
ISAC Reply 3AEU added to MRC CWCK.
ISAC Reply 3AEX added to MRC CWCK.
ISAC Reply 3HOU added to MRC CWCK.
ISAC Reply 1A deleted from MRC CWCK.
ISAC Reply 1B deleted from MRC CWCK.
ISAC Reply 1C deleted from MRC CWCK.
ISAC Reply 1D deleted from MRC CWCK.
ISAC Reply 1E deleted from MRC CWCK.
ISAC Reply 3AEE added to MRC AKGG.
ISAC Reply 3AEE added to MRC AKGG.
ISAC Reply 3AET added to MRC AKGG.
ISAC Reply 3AET added to MRC AKGG.
ISAC Reply 3AEX added to MRC AKGG.
ISAC Reply 3AEX added to MRC AKGG.
ISAC Reply 3HOU added to MRC AKGG.
ISAC Reply 3HOU added to MRC AKGG.
ISAC Reply 1A deleted from MRC AKGG.
ISAC Reply 1B deleted from MRC AKGG.
ISAC Reply 1C deleted from MRC AKGG.
ISAC Reply 1D deleted from MRC AKGG.
ISAC Reply 1E deleted from MRC AKGG.
ISAC Reply 3AEE added to MRC AKGF.
ISAC Reply 3AEE added to MRC AKGF.
ISAC Reply 3AET added to MRC AKGF.
ISAC Reply 3AET added to MRC AKGF.
ISAC Reply 3AEX added to MRC AKGF.
ISAC Reply 3AEX added to MRC AKGF.
ISAC Reply 3HOU added to MRC AKGF.
ISAC Reply 3HOU added to MRC AKGF.
ISAC Reply 1A deleted from MRC AKGF.
ISAC Reply 1B deleted from MRC AKGF.
ISAC Reply 1C deleted from MRC AKGF.
ISAC Reply 1D deleted from MRC AKGF.
ISAC Reply 1E deleted from MRC AKGF.
ISAC Reply 3AEE added to MRC AECS.
ISAC Reply 3AET added to MRC AECS.
ISAC Reply 3AEU added to MRC AECS.
ISAC Reply 3AEX added to MRC AECS.
ISAC Reply 3AIB added to MRC AECS.
ISAC Reply 3HOU added to MRC AECS.
ISAC Reply 1A deleted from MRC AECS.
ISAC Reply 1B deleted from MRC AECS.
ISAC Reply 1C deleted from MRC AECS.
ISAC Reply 1D deleted from MRC AECS.
ISAC Reply 1E deleted from MRC AECS.
ISAC Reply 3AEE added to MRC CWCQ.
ISAC Reply 3AET added to MRC CWCQ.
ISAC Reply 3AEU added to MRC CWCQ.
ISAC Reply 3AEX added to MRC CWCQ.
ISAC Reply 3AIB added to MRC CWCQ.
ISAC Reply 3HOU added to MRC CWCQ.
ISAC Reply 1A deleted from MRC CWCQ.
ISAC Reply 1B deleted from MRC CWCQ.
ISAC Reply 1C deleted from MRC CWCQ.
ISAC Reply 1D deleted from MRC CWCQ.
ISAC Reply 1E deleted from MRC CWCQ.
ISAC Reply 3AEE added to MRC CWCT.
ISAC Reply 3AET added to MRC CWCT.
ISAC Reply 3AEU added to MRC CWCT.
ISAC Reply 3AEX added to MRC CWCT.
ISAC Reply 3AIB added to MRC CWCT.
ISAC Reply 3HOU added to MRC CWCT.
ISAC Reply 1A deleted from MRC CWCT.
ISAC Reply 1B deleted from MRC CWCT.
ISAC Reply 1C deleted from MRC CWCT.
ISAC Reply 1D deleted from MRC CWCT.
ISAC Reply 1E deleted from MRC CWCT.
ISAC Reply 3AEE added to MRC CWCY.
ISAC Reply 3AEX added to MRC CWCY.
ISAC Reply 3HOU added to MRC CWCY.
ISAC Reply 1A deleted from MRC CWCY.
ISAC Reply 1B deleted from MRC CWCY.
ISAC Reply 1C deleted from MRC CWCY.
ISAC Reply 1D deleted from MRC CWCY.
ISAC Reply 1E deleted from MRC CWCY.
ISAC Reply 3AEE added to MRC CWDC.
ISAC Reply 3AEE added to MRC CWDC.
ISAC Reply 3AET added to MRC CWDC.
ISAC Reply 3AET added to MRC CWDC.
ISAC Reply 3AEX added to MRC CWDC.
ISAC Reply 3AEX added to MRC CWDC.
ISAC Reply 3HOU added to MRC CWDC.
ISAC Reply 3HOU added to MRC CWDC.
ISAC Reply 1A deleted from MRC CWDC.
ISAC Reply 1B deleted from MRC CWDC.
ISAC Reply 1C deleted from MRC CWDC.
ISAC Reply 1D deleted from MRC CWDC.
ISAC Reply 1E deleted from MRC CWDC.
ISAC Reply 3AEE added to MRC CWDF.
ISAC Reply 3AET added to MRC CWDF.
ISAC Reply 3AEU added to MRC CWDF.
ISAC Reply 3AEX added to MRC CWDF.
ISAC Reply 3HOU added to MRC CWDF.
ISAC Reply 1A deleted from MRC CWDF.
ISAC Reply 1B deleted from MRC CWDF.
ISAC Reply 1C deleted from MRC CWDF.
ISAC Reply 1D deleted from MRC CWDF.
ISAC Reply 1E deleted from MRC CWDF.
ISAC Reply 3AEE added to MRC AAAR.
ISAC Reply 3AET added to MRC AAAR.
ISAC Reply 3AEU added to MRC AAAR.
ISAC Reply 3AEX added to MRC AAAR.
ISAC Reply 3HOU added to MRC AAAR.
ISAC Reply 1A deleted from MRC AAAR.
ISAC Reply 1B deleted from MRC AAAR.
ISAC Reply 1C deleted from MRC AAAR.
ISAC Reply 1D deleted from MRC AAAR.
ISAC Reply 1E deleted from MRC AAAR.
ISAC Reply 3AEE added to MRC CWFD.
ISAC Reply 3AET added to MRC CWFD.
ISAC Reply 3AEU added to MRC CWFD.
ISAC Reply 3AEX added to MRC CWFD.
ISAC Reply 3HOU added to MRC CWFD.
ISAC Reply 1A deleted from MRC CWFD.
ISAC Reply 1B deleted from MRC CWFD.
ISAC Reply 1C deleted from MRC CWFD.
ISAC Reply 1D deleted from MRC CWFD.
ISAC Reply 1E deleted from MRC CWFD.
ISAC Reply 3AEE added to MRC THSD.
ISAC Reply 3AET added to MRC THSD.
ISAC Reply 3AEU added to MRC THSD.
ISAC Reply 3AEX added to MRC THSD.
ISAC Reply 3AIB added to MRC THSD.
ISAC Reply 3HOU added to MRC THSD.
ISAC Reply 1A deleted from MRC THSD.
ISAC Reply 1B deleted from MRC THSD.
ISAC Reply 1C deleted from MRC THSD.
ISAC Reply 1D deleted from MRC THSD.
ISAC Reply 1E deleted from MRC THSD.
ISAC Reply 3AEE added to MRC CQJX.
ISAC Reply 3AEE added to MRC CQJX.
ISAC Reply 3AET added to MRC CQJX.
ISAC Reply 3AET added to MRC CQJX.
ISAC Reply 3AEU added to MRC CQJX.
ISAC Reply 3AEU added to MRC CQJX.
ISAC Reply 3AEX added to MRC CQJX.
ISAC Reply 3AEX added to MRC CQJX.
ISAC Reply 3AIB added to MRC CQJX.
ISAC Reply 3AIB added to MRC CQJX.
ISAC Reply 3HOU added to MRC CQJX.
ISAC Reply 3HOU added to MRC CQJX.
ISAC Reply 1A deleted from MRC CQJX.
ISAC Reply 1B deleted from MRC CQJX.
ISAC Reply 1C deleted from MRC CQJX.
ISAC Reply 1D deleted from MRC CQJX.
ISAC Reply 1E deleted from MRC CQJX.
ISAC Reply 3AEE added to MRC CMLP.
ISAC Reply 3AEE added to MRC CMLP.
ISAC Reply 3AET added to MRC CMLP.
ISAC Reply 3AET added to MRC CMLP.
ISAC Reply 3AEU added to MRC CMLP.
ISAC Reply 3AEU added to MRC CMLP.
ISAC Reply 3AEX added to MRC CMLP.
ISAC Reply 3AEX added to MRC CMLP.
ISAC Reply 3HOU added to MRC CMLP.
ISAC Reply 3HOU added to MRC CMLP.
ISAC Reply 1A deleted from MRC CMLP.
ISAC Reply 1B deleted from MRC CMLP.
ISAC Reply 1C deleted from MRC CMLP.
ISAC Reply 1D deleted from MRC CMLP.
ISAC Reply 1E deleted from MRC CMLP.
ISAC Reply 3AEE added to MRC AAJD.
ISAC Reply 3AEE added to MRC AAJD.
ISAC Reply 3AET added to MRC AAJD.
ISAC Reply 3AET added to MRC AAJD.
ISAC Reply 3AEU added to MRC AAJD.
ISAC Reply 3AEU added to MRC AAJD.
ISAC Reply 3AEX added to MRC AAJD.
ISAC Reply 3AEX added to MRC AAJD.
ISAC Reply 3HOU added to MRC AAJD.
ISAC Reply 3HOU added to MRC AAJD.
ISAC Reply 1A deleted from MRC AAJD.
ISAC Reply 1B deleted from MRC AAJD.
ISAC Reply 1C deleted from MRC AAJD.
ISAC Reply 1D deleted from MRC AAJD.
ISAC Reply 1E deleted from MRC AAJD.
ISAC Reply 3AEE added to MRC CQQR.
ISAC Reply 3AET added to MRC CQQR.
ISAC Reply 3AEU added to MRC CQQR.
ISAC Reply 3HOU added to MRC CQQR.
ISAC Reply 1A deleted from MRC CQQR.
ISAC Reply 1B deleted from MRC CQQR.
ISAC Reply 1C deleted from MRC CQQR.
ISAC Reply 1D deleted from MRC CQQR.
ISAC Reply 1E deleted from MRC CQQR.
ISAC Reply 3AEE added to MRC AAJF.
ISAC Reply 3AET added to MRC AAJF.
ISAC Reply 3AEU added to MRC AAJF.
ISAC Reply 3AEX added to MRC AAJF.
ISAC Reply 3AIB added to MRC AAJF.
ISAC Reply 3HOU added to MRC AAJF.
ISAC Reply 1A deleted from MRC AAJF.
ISAC Reply 1B deleted from MRC AAJF.
ISAC Reply 1C deleted from MRC AAJF.
ISAC Reply 1D deleted from MRC AAJF.
ISAC Reply 1E deleted from MRC AAJF.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED05481*)
ADQUDFLOW CONTROL DEVICE
THE PART THAT CONTROLS THE FLOW THROUGH THE ITEM.
Enter the applicable reply code from the table below
(ADQUDDJ*;ADQUDDH$DCW*)
| Table 1 |
| Reply Code (AC57) | Reply |
| AA | BALL |
| AC | CONE |
| AQ | DIAPHRAGM |
| BP | DISK |
| AS | NEEDLE |
| DK | O-RING, DILATING |
| CW | PISTON |
| AV | PLUG |
| AW | POPPET |
| DH | SLIDE |
| DJ | SPOOL |
| CG | STEM |
AQLRDVALVE OPERATION METHOD
THE MEANS USED TO CONTROL THE OPERATION OF THE VALVE.
Enter the applicable reply code from the table below
(AQLRDAAB*;AQLRDAAG$DAAD*)
| Table 1 |
| Reply Code (AC58) | Reply |
| AAB | AIR |
| AAC | AUTOMATIC |
| AAD | ELECTRIC MOTOR |
| AAE | HYDRAULIC |
| AAF | MANUAL |
| AAG | SOLENOID |
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLA24A)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| BU10001 | A1 | STRAIGHT THRU |
| BU10018 | A10 | STRAIGHT THRU |
| BU10019 | A10A | STRAIGHT THRU FLANGED ENDS |
| BU10020 | A11 | CROSS |
| BU10021 | A11A | CROSS FLANGED ENDS |
| BU10022 | A12 | ANGLE |
| BU10023 | A12A | ANGLE FLANGED ENDS |
| BU10024 | A14 | ANGLE W/OFFSET |
| BU10025 | A14A | ANGLE W/OFFSET FLANGED ENDS |
| BU10026 | A16 | ANGLE W/OFFSET |
| BU10027 | A16A | ANGLE W/OFFSET FLANGED ENDS |
| BU10028 | A17 | CROSS W/OFFSET |
| BU10029 | A17A | CROSS W/OFFSET FLANGED ENDS |
| BU10030 | A18 | STRAIGHT THRU |
| BU10031 | A18A | STRAIGHT THRU FLANGED ENDS |
| BU10032 | A19 | CROSS |
| BU10033 | A19A | CROSS FLANGED ENDS |
| BU10002 | A1A | STRAIGHT THRU FLANGED ENDS |
| BU10003 | A2 | CROSS |
| BU10035 | A20 | STRAIGHT THRU |
| BU10036 | A20A | STRAIGHT THRU FLANGED ENDS |
| BU10034 | A21 | CROSS W/OFFSET |
| BU10037 | A21A | CROSS W/OFFSET FLANGED ENDS |
| BU10038 | A22 | TEE W/OFFSET |
| BU10039 | A22A | TEE W/OFFSET FLANGED ENDS |
| BU10040 | A23 | CROSS |
| BU10041 | A23A | CROSS FLANGED ENDS |
| BU10042 | A24 | CROSS |
| BU10043 | A24A | CROSS FLANGED ENDS |
| BU10044 | A25 | TEE W/OFFSET |
| BU10045 | A25A | TEE W/OFFSET FLANGED ENDS |
| BU10046 | A27 | TEE W/OFFSET |
| BU10047 | A27A | TEE W/OFFSET FLANGED ENDS |
| BU10048 | A28 | TEE W/OFFSET |
| BU10049 | A28A | TEE W/OFFSET FLANGED ENDS |
| BU10050 | A29 | CAPS W/OFFSET |
| BU10051 | A29A | CROSS W/OFFSET FLANGED ENDS |
| BU10004 | A2A | CROSS FLANGED ENDS |
| BU10005 | A3 | CROSS |
| BU10052 | A31 | STRAIGHT THRU |
| BU10053 | A31A | STRAIGHT THRU FLANGED ENDS |
| BU10054 | A32 | STRAIGHT THRU |
| BU10055 | A32A | STRAIGHT THRU FLANGED ENDS |
| BU10056 | A33 | STRAIGHT THRU |
| BU10057 | A33A | STRAIGHT THRU FLANGED ENDS |
| BU10058 | A34 | TEE W/OFFSET |
| BU10059 | A34A | TEE W/OFFSET FLANGED ENDS |
| BU10060 | A37 | TEE W/OFFSET |
| BU10061 | A37A | TEE W/OFFSET FLANGED ENDS |
| BU10062 | A39 | ANGLE |
| BU10063 | A39A | ANGLE FLANGED ENDS |
| BU10006 | A3A | CROSS FLANGED ENDS |
| BU10007 | A4 | STRAIGHT THRU |
| BU10064 | A40 | ANGLE W/OFFSET |
| BU10065 | A40A | ANGLE W/OFFSET FLANGED ENDS |
| BU10235 | A44 | STRAIGHT THRU |
| BU10066 | A44A | STRAIGHT THRU FLANGED ENDS |
| BU10067 | A45 | ANGLE |
| BU10068 | A45A | ANGLE FLANGED ENDS |
| BU10069 | A46 | SCREW-IN CARTRIDGE |
| BU10070 | A47 | DROP-IN CARTRIDGE |
| BU10071 | A48 | OFFSET |
| BU10072 | A49 | ANGLE DROP-IN CARTRIDGE FLANGED |
| BU10008 | A5 | "Y" ANGLE |
| BU10009 | A5A | "Y" ANGLE FLANGED ENDS |
| BU10011 | A6 | STRAIGHT THRU W/OFFSET |
| BU10010 | A6A | STRAIGHT THRU W/OFFSET FLANGED ENDS |
| BU10012 | A7 | ANGLE |
| BU10013 | A7A | ANGLE FLANGED ENDS |
| BU10014 | A8 | STRAIGHT THRU Y-PATTERN |
| BU10015 | A8A | STRAIGHT THRU Y-PATTERN FLANGED ENDS |
| BU10016 | A9 | "Y" ANGLE |
| BU10017 | A9A | "Y" ANGLE FLANGED ENDS |
| BU10089 | C1 | ANGLE |
| BU10101 | C10 | SCREW-IN CARTRIDGE |
| BU10102 | C11 | SCREW-IN CARTRIDGE |
| BU10103 | C12 | DROP-IN CARTRIDGE |
| BU10090 | C1A | ANGLE FLANGED ENDS |
| BU10091 | C2 | STRAIGHT THRU |
| BU10092 | C3 | ANGLE |
| BU10093 | C4 | STRAIGHT THRU |
| BU10094 | C5 | STRAIGHT THRU W/BAFFLE |
| BU10095 | C6 | STRAIGHT THRU |
| BU10096 | C7 | STRAIGHT THRU NOTE: TO BE USED FOR VALVE BODIES OF SEPARABLE SECTIONS. |
| BU10097 | C7A | STRAIGHT THRU FLANGED ENDS NOTE: TO BE USED FOR VALVE BODIES OF SEPARABLE SECTIONS. |
| BU10098 | C8 | STRAIGHT THRU NOTE: TO BE USED FOR VALVE BODIES OF ONE SECTION ONLY. |
| BU10099 | C8A | STRAIGHT THRU FLANGED ENDS NOTE:TO BE USED FOR VALVE BODIES OF ONE SECTION ONLY. |
| BU10100 | C9 | SAFETY RELIEF |
| BU10125 | E1 | DRILLED U-BOLT TYPE STRAIGHT THRU |
| BU10126 | E2 | DRILLED U-STRAP TYPE STRAIGHT THRU |
| BU10127 | E3 | DRILLED PLAIN STRAP TYPE ANGLE |
| BU10128 | E4 | ANGLE LINE PIERCING |
| BU10129 | E5 | STRAIGHT THRU CLAMP LINE PIERCING |
| BU10130 | E6 | ANGLE PLAIN STRAP TYPE LINE PIERCING |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3BAUDST1045*;MATT3BAUDST1045$DZRB000*;MATT3BAUDST1045$$DZRB000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3BAU | SEAT |
| 3BCM | FLOW CONTROL DEVICE |
| 3BKI | STEM |
| 3DLU | PACKING |
| 3DTD | BODY LINING |
| 3DTE | DISK |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL0177 | ALUMINUM ALLOY 1080A |
| AL1100 | ALUMINUM ALLOY 1100 |
| AL2011 | ALUMINUM ALLOY 2011 |
| AL2014 | ALUMINUM ALLOY 2014 |
| AL2017 | ALUMINUM ALLOY 2017 |
| AL2018 | ALUMINUM ALLOY 2018 |
| AL2024 | ALUMINUM ALLOY 2024 |
| AL2025 | ALUMINUM ALLOY 2025 |
| AL0034 | ALUMINUM ALLOY 208.0 |
| AL2117 | ALUMINUM ALLOY 2117 |
| AL0213 | ALUMINUM ALLOY 213.0 |
| AL2218 | ALUMINUM ALLOY 2218 |
| AL2219 | ALUMINUM ALLOY 2219 |
| AL0038 | ALUMINUM ALLOY 222.0 |
| AL0039 | ALUMINUM ALLOY 242.0 |
| AL2618 | ALUMINUM ALLOY 2618 |
| AL0025 | ALUMINUM ALLOY 295.0 |
| AL0056 | ALUMINUM ALLOY 3.1354 |
| AL3003 | ALUMINUM ALLOY 3003 |
| AL0308 | ALUMINUM ALLOY 308.0 |
| AL0035 | ALUMINUM ALLOY 319.0 |
| AL0036 | ALUMINUM ALLOY 328.0 |
| AL0045 | ALUMINUM ALLOY 355.0 |
| AL0046 | ALUMINUM ALLOY 356.0 |
| AL0051 | ALUMINUM ALLOY 357.0 |
| AL0031 | ALUMINUM ALLOY 380.0 |
| AL0054 | ALUMINUM ALLOY 383.0 |
| AL0032 | ALUMINUM ALLOY 384.0 |
| AL4032 | ALUMINUM ALLOY 4032 |
| AL0027 | ALUMINUM ALLOY 413.0 |
| AL0044 | ALUMINUM ALLOY 443.0 |
| AL5005 | ALUMINUM ALLOY 5005 |
| AL5083 | ALUMINUM ALLOY 5083 |
| AL0026 | ALUMINUM ALLOY 514.0 |
| AL0050 | ALUMINUM ALLOY 518.0 |
| AL0043 | ALUMINUM ALLOY 520.0 |
| AL0059 | ALUMINUM ALLOY 535.0 |
| AL5456 | ALUMINUM ALLOY 5456 |
| AL6061 | ALUMINUM ALLOY 6061 |
| AL6066 | ALUMINUM ALLOY 6066 |
| AL6151 | ALUMINUM ALLOY 6151 |
| AL7049 | ALUMINUM ALLOY 7049 |
| AL0047 | ALUMINUM ALLOY 705.0 |
| AL0048 | ALUMINUM ALLOY 707.0 |
| AL7075 | ALUMINUM ALLOY 7075 |
| AL7076 | ALUMINUM ALLOY 7076 |
| AL0049 | ALUMINUM ALLOY 713.0 |
| AL0771 | ALUMINUM ALLOY 771.0 |
| AL0850 | ALUMINUM ALLOY 850.0 |
| AL0063 | ALUMINUM ALLOY A332.0 |
| AL0002 | ALUMINUM ALLOY A356.0 |
| AL0052 | ALUMINUM ALLOY A360.0 |
| AL0028 | ALUMINUM ALLOY A380.0 |
| AL0053 | ALUMINUM ALLOY A384.0 |
| AL0030 | ALUMINUM ALLOY A413.0 |
| AL0042 | ALUMINUM ALLOY A712.0 |
| AL0061 | ALUMINUM ALLOY A850.0 |
| AL0040 | ALUMINUM ALLOY B295.0 |
| AL0033 | ALUMINUM ALLOY B443.0 |
| AL0041 | ALUMINUM ALLOY B514.0 |
| AL0062 | ALUMINUM ALLOY B850.0 |
| AL0060 | ALUMINUM ALLOY C355.0 |
| AL0008 | ALUMINUM ALLOY C443.0 |
| AL0024 | ALUMINUM ALLOY D712.0 |
| AL0066 | ALUMINUM ALLOY F332.0 |
| ASA000 | ASBESTOS |
| BND000 | BRONZE |
| CSA000 | CELLULOSE |
| CXA000 | CEMENT |
| CRA000 | CHROMIUM |
| CRB000 | CHROMIUM ALLOY |
| CTA000 | COBALT |
| CTB000 | COBALT ALLOY |
| CT0004 | COBALT COMP 6 |
| CT0001 | COBALT COMP L-605 |
| CT0007 | COBALT COMP VF-6 |
| CT0008 | COBALT COMP VF-7 |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CU0063 | COPPER ALLOY 110 |
| CU0324 | COPPER ALLOY 127 |
| CU0281 | COPPER ALLOY 145 |
| CU0068 | COPPER ALLOY 170 |
| CU0346 | COPPER ALLOY 192 |
| CU0264 | COPPER ALLOY 220 |
| CU0074 | COPPER ALLOY 230 |
| CU0076 | COPPER ALLOY 240 |
| CU0079 | COPPER ALLOY 260 |
| CU0304 | COPPER ALLOY 262 |
| CU0080 | COPPER ALLOY 268 |
| CU0081 | COPPER ALLOY 270 |
| CU0272 | COPPER ALLOY 272 |
| CU0274 | COPPER ALLOY 274 |
| CU0302 | COPPER ALLOY 280 |
| CU0314 | COPPER ALLOY 314 |
| CU0316 | COPPER ALLOY 316 |
| CU0330 | COPPER ALLOY 330 |
| CU0305 | COPPER ALLOY 331 |
| CU0332 | COPPER ALLOY 332 |
| CU0335 | COPPER ALLOY 335 |
| CU0340 | COPPER ALLOY 340 |
| CU0088 | COPPER ALLOY 342 |
| CU0306 | COPPER ALLOY 344 |
| CU0307 | COPPER ALLOY 345 |
| CU0308 | COPPER ALLOY 347 |
| CU0309 | COPPER ALLOY 348 |
| CU0310 | COPPER ALLOY 350 |
| CU0089 | COPPER ALLOY 353 |
| CU0090 | COPPER ALLOY 356 |
| CU0091 | COPPER ALLOY 360 |
| CU0370 | COPPER ALLOY 370 |
| CU0092 | COPPER ALLOY 377 |
| CU0098 | COPPER ALLOY 462 |
| CU0099 | COPPER ALLOY 464 |
| CU0465 | COPPER ALLOY 465 |
| CU0466 | COPPER ALLOY 466 |
| CU0467 | COPPER ALLOY 467 |
| CU0100 | COPPER ALLOY 482 |
| CU0101 | COPPER ALLOY 485 |
| CU0300 | COPPER ALLOY 508 |
| CU0103 | COPPER ALLOY 510 |
| CU0108 | COPPER ALLOY 534 |
| CU0111 | COPPER ALLOY 606 |
| CU0112 | COPPER ALLOY 610 |
| CU0114 | COPPER ALLOY 613 |
| CU0115 | COPPER ALLOY 614 |
| CU0269 | COPPER ALLOY 619 |
| CU0119 | COPPER ALLOY 623 |
| CU0624 | COPPER ALLOY 624 |
| CU0122 | COPPER ALLOY 630 |
| CU0632 | COPPER ALLOY 632 |
| CU0127 | COPPER ALLOY 642 |
| CU0129 | COPPER ALLOY 651 |
| CU0131 | COPPER ALLOY 655 |
| CU0670 | COPPER ALLOY 670 |
| CU0675 | COPPER ALLOY 675 |
| CU0694 | COPPER ALLOY 694 |
| CU0697 | COPPER ALLOY 697 |
| CU0706 | COPPER ALLOY 706 |
| CU0715 | COPPER ALLOY 715 |
| CU0148 | COPPER ALLOY 745 |
| CU0150 | COPPER ALLOY 752 |
| CU0757 | COPPER ALLOY 757 |
| CU0152 | COPPER ALLOY 764 |
| CU0157 | COPPER ALLOY 770 |
| CU0774 | COPPER ALLOY 774 |
| CU0166 | COPPER ALLOY 820 |
| CU0167 | COPPER ALLOY 824 |
| CU0168 | COPPER ALLOY 825 |
| CU0169 | COPPER ALLOY 826 |
| CU0170 | COPPER ALLOY 827 |
| CU0172 | COPPER ALLOY 836 |
| CU0173 | COPPER ALLOY 838 |
| CU0175 | COPPER ALLOY 844 |
| CU0176 | COPPER ALLOY 848 |
| CU0177 | COPPER ALLOY 852 |
| CU0178 | COPPER ALLOY 854 |
| CU0179 | COPPER ALLOY 855 |
| CU0180 | COPPER ALLOY 857 |
| CU0181 | COPPER ALLOY 861 |
| CU0182 | COPPER ALLOY 862 |
| CU0183 | COPPER ALLOY 863 |
| CU0184 | COPPER ALLOY 864 |
| CU0185 | COPPER ALLOY 865 |
| CU0867 | COPPER ALLOY 867 |
| CU0186 | COPPER ALLOY 868 |
| CU0187 | COPPER ALLOY 872 |
| CU0188 | COPPER ALLOY 874 |
| CU0875 | COPPER ALLOY 875 |
| CU0876 | COPPER ALLOY 876 |
| CU0194 | COPPER ALLOY 90 |
| CU0195 | COPPER ALLOY 903 |
| CU0196 | COPPER ALLOY 905 |
| CU0197 | COPPER ALLOY 907 |
| CU0198 | COPPER ALLOY 910 |
| CU0199 | COPPER ALLOY 913 |
| CU0201 | COPPER ALLOY 916 |
| CU0202 | COPPER ALLOY 922 |
| CU0204 | COPPER ALLOY 925 |
| CU0205 | COPPER ALLOY 927 |
| CU0928 | COPPER ALLOY 928 |
| CU0206 | COPPER ALLOY 932 |
| CU0207 | COPPER ALLOY 934 |
| CU0208 | COPPER ALLOY 935 |
| CU0209 | COPPER ALLOY 937 |
| CU0210 | COPPER ALLOY 938 |
| CU0211 | COPPER ALLOY 939 |
| CU0213 | COPPER ALLOY 941 |
| CU0214 | COPPER ALLOY 943 |
| CU0215 | COPPER ALLOY 947 |
| CU0216 | COPPER ALLOY 948 |
| CU0949 | COPPER ALLOY 949 |
| CU0217 | COPPER ALLOY 952 |
| CU0218 | COPPER ALLOY 953 |
| CU0219 | COPPER ALLOY 954 |
| CU0220 | COPPER ALLOY 955 |
| CU0956 | COPPER ALLOY 956 |
| CU0221 | COPPER ALLOY 957 |
| CU0222 | COPPER ALLOY 958 |
| CU0223 | COPPER ALLOY 962 |
| CU0224 | COPPER ALLOY 964 |
| CU0976 | COPPER ALLOY 976 |
| CU0978 | COPPER ALLOY 978 |
| CU1164 | COPPER ALLOY FED C6 |
| CU1162 | COPPER ALLOY FED E3 |
| CU1163 | COPPER ALLOY FED E4 |
| FBA000 | FIBER |
| GSA000 | GLASS |
| GSB000 | GLASS FIBER |
| GFA000 | GRAPHITE |
| FEA000 | IRON |
| FEF000 | IRON ALLOY |
| FE0019 | IRON ALLOY 660 |
| FEB000 | IRON CAST |
| FE0062 | IRON CAST UNS F11501 |
| FE0063 | IRON CAST UNS F12102 |
| FE0047 | IRON CAST UNS F12801 |
| FE0064 | IRON CAST UNS F12802 |
| FE0051 | IRON CAST UNS F14101 |
| FE0038 | IRON CAST UNS F22200 |
| FE0039 | IRON CAST UNS F22400 |
| FE0061 | IRON CAST UNS F32800 |
| FE0065 | IRON CAST UNS F33100 |
| FE0066 | IRON CAST UNS F33800 |
| FE0067 | IRON CAST UNS F34800 |
| FE0068 | IRON CAST UNS F36200 |
| FEC000 | IRON MALLEABLE |
| PBA000 | LEAD |
| PBB000 | LEAD ALLOY |
| LRA000 | LEATHER |
| MGA000 | MAGNESIUM |
| MGB000 | MAGNESIUM ALLOY |
| MNA000 | MANGANESE |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| NL0008 | NICKEL ALLOY 400 |
| NL0019 | NICKEL ALLOY 502 |
| NL0009 | NICKEL ALLOY 600 |
| NL0012 | NICKEL ALLOY 625 |
| NL0010 | NICKEL ALLOY 718 |
| NL0018 | NICKEL ALLOY K-500 |
| NL0017 | NICKEL ALLOY R-405 |
| NL0051 | NICKEL ALLOY WE-132 |
| PCA000 | PLASTIC |
| PCB000 | PLASTIC ACETAL |
| PCD000 | PLASTIC ACRYLIC |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCQ000 | PLASTIC POLYCAPROLACTAM |
| PCT000 | PLASTIC POLYCHLOROTRIFLUOROETHYLENE |
| PCY000 | PLASTIC POLYETHYLENE TEREPHTHALATE |
| PCZ000 | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE |
| PCAM00 | PLASTIC POLYHEXAMETHYLENE AMIDE |
| PCAA00 | PLASTIC POLYHEXAMETHYLENE SEBACAMIDE |
| PCAC00 | PLASTIC POLYPROPYLENE |
| PCAF00 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCAR00 | PLASTIC POLYTRIFLUOROETHYLENE |
| PCAAAB | PLASTIC POLYUNDECANOAMIDE |
| PCAH00 | PLASTIC POLYURETHANE |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| PCBG00 | PLASTIC POLYVINYLIDENE CHLORIDE |
| PCAK00 | PLASTIC SILICONE |
| PCAW00 | PLASTIC TETRAFLUOROETHYLENE |
| PCAL00 | PLASTIC UREA |
| PCAP00 | PLASTIC VINYL |
| RSD000 | RESIN |
| RCE000 | RUBBER |
| RC0024 | RUBBER BUTADIENE CLASS BR |
| RC0019 | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| RC0022 | RUBBER BUTADIENE-STYRENE CLASS SBR |
| RC0007 | RUBBER CHLOROPRENE CLASS CR |
| RC0009 | RUBBER ETHYLENE-PROPYLENE CLASS EPM |
| RC0010 | RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM |
| RC0013 | RUBBER FLUOROCARBON CLASS FPM |
| RC0014 | RUBBER FLUOROSILICONE CLASS FQ |
| RC0017 | RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR |
| RCA000 | RUBBER NATURAL |
| RCAC00 | RUBBER NEOPRENE |
| RC0002 | RUBBER POLYACRYLATE-ACRYLONITRILE CLASS ANM |
| RC0012 | RUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM |
| RC0021 | RUBBER SILICONE CLASS Q |
| RCB000 | RUBBER SYNTHETIC |
| SLC000 | SILICON |
| AGA000 | SILVER |
| SLF000 | STEATITE |
| STA000 | STEEL |
| ST0383 | STEEL COMP 1.3243 |
| ST1008 | STEEL COMP 1008 |
| ST1010 | STEEL COMP 1010 |
| ST1015 | STEEL COMP 1015 |
| ST1016 | STEEL COMP 1016 |
| ST1018 | STEEL COMP 1018 |
| ST1019 | STEEL COMP 1019 |
| ST1020 | STEEL COMP 1020 |
| ST1022 | STEEL COMP 1022 |
| ST1025 | STEEL COMP 1025 |
| ST1026 | STEEL COMP 1026 |
| ST1029 | STEEL COMP 1029 |
| ST1030 | STEEL COMP 1030 |
| ST1035 | STEEL COMP 1035 |
| ST1045 | STEEL COMP 1045 |
| ST1050 | STEEL COMP 1050 |
| ST1095 | STEEL COMP 1095 |
| ST1109 | STEEL COMP 1109 |
| ST1110 | STEEL COMP 1110 |
| ST1114 | STEEL COMP 1114 |
| ST1115 | STEEL COMP 1115 |
| ST1116 | STEEL COMP 1116 |
| ST1117 | STEEL COMP 1117 |
| ST1118 | STEEL COMP 1118 |
| ST1119 | STEEL COMP 1119 |
| ST1132 | STEEL COMP 1132 |
| ST1137 | STEEL COMP 1137 |
| ST1139 | STEEL COMP 1139 |
| ST1140 | STEEL COMP 1140 |
| ST1141 | STEEL COMP 1141 |
| ST1145 | STEEL COMP 1145 |
| ST1146 | STEEL COMP 1146 |
| ST1151 | STEEL COMP 1151 |
| ST0520 | STEEL COMP 120-95 |
| ST1211 | STEEL COMP 1211 |
| ST1212 | STEEL COMP 1212 |
| ST1213 | STEEL COMP 1213 |
| ST1215 | STEEL COMP 1215 |
| ST0063 | STEEL COMP 12L14 |
| ST1330 | STEEL COMP 1330 |
| ST0531 | STEEL COMP 150-125 |
| ST1552 | STEEL COMP 1552 |
| ST0202 | STEEL COMP 202 |
| ST0159 | STEEL COMP 203EZ |
| ST0301 | STEEL COMP 301 |
| ST0302 | STEEL COMP 302 |
| ST0180 | STEEL COMP 302B |
| ST0303 | STEEL COMP 303 |
| ST0166 | STEEL COMP 303 PLUS X |
| ST0157 | STEEL COMP 303CU |
| ST0165 | STEEL COMP 303MA |
| ST0158 | STEEL COMP 303PB |
| ST0078 | STEEL COMP 303S |
| ST0079 | STEEL COMP 303SE |
| ST0304 | STEEL COMP 304 |
| ST0080 | STEEL COMP 304L |
| ST0449 | STEEL COMP 304N |
| ST0305 | STEEL COMP 305 |
| ST0152 | STEEL COMP 308 |
| ST0309 | STEEL COMP 309 |
| ST0153 | STEEL COMP 309S |
| ST0310 | STEEL COMP 310 |
| ST0154 | STEEL COMP 310S |
| ST0522 | STEEL COMP 3120H |
| ST0155 | STEEL COMP 314 |
| ST0316 | STEEL COMP 316 |
| ST0082 | STEEL COMP 316L |
| ST0451 | STEEL COMP 316N |
| ST0317 | STEEL COMP 317 |
| ST0254 | STEEL COMP 317L |
| ST0321 | STEEL COMP 321 |
| ST0322 | STEEL COMP 322 |
| ST0324 | STEEL COMP 324 |
| ST0616 | STEEL COMP 325 |
| ST0617 | STEEL COMP 330 |
| ST0618 | STEEL COMP 330A |
| ST0347 | STEEL COMP 347 |
| ST0348 | STEEL COMP 348 |
| ST0384 | STEEL COMP 384 |
| ST0385 | STEEL COMP 385 |
| ST0403 | STEEL COMP 403 |
| ST0405 | STEEL COMP 405 |
| ST0410 | STEEL COMP 410 |
| ST4130 | STEEL COMP 4130 |
| ST0090 | STEEL COMP 4130H |
| ST0092 | STEEL COMP 4137H |
| ST0414 | STEEL COMP 414 |
| ST4140 | STEEL COMP 4140 |
| ST0416 | STEEL COMP 416 |
| ST0255 | STEEL COMP 416 PLUS X |
| ST0099 | STEEL COMP 416SE |
| ST0420 | STEEL COMP 420 |
| ST0100 | STEEL COMP 420F |
| ST0284 | STEEL COMP 420FSE |
| ST1047 | STEEL COMP 422 |
| ST0429 | STEEL COMP 429 |
| ST0430 | STEEL COMP 430 |
| ST0101 | STEEL COMP 430F |
| ST0172 | STEEL COMP 430FSE |
| ST0431 | STEEL COMP 431 |
| ST0103 | STEEL COMP 4337H |
| ST0105 | STEEL COMP 440A |
| ST0106 | STEEL COMP 440B |
| ST0107 | STEEL COMP 440C |
| ST0108 | STEEL COMP 440F |
| ST0285 | STEEL COMP 440FSE |
| ST0446 | STEEL COMP 446 |
| ST4615 | STEEL COMP 4615 |
| ST5115 | STEEL COMP 5115 |
| ST5160 | STEEL COMP 5160 |
| ST0116 | STEEL COMP 51B60H |
| ST0615 | STEEL COMP 615 |
| ST6150 | STEEL COMP 6150 |
| ST0630 | STEEL COMP 630 |
| ST0008 | STEEL COMP 8 |
| ST0134 | STEEL COMP 80-50 |
| ST8615 | STEEL COMP 8615 |
| ST8617 | STEEL COMP 8617 |
| ST8620 | STEEL COMP 8620 |
| ST0138 | STEEL COMP 8622H |
| ST8637 | STEEL COMP 8637 |
| ST8640 | STEEL COMP 8640 |
| ST8735 | STEEL COMP 8735 |
| ST8740 | STEEL COMP 8740 |
| ST0147 | STEEL COMP 8740H |
| ST0009 | STEEL COMP 9 |
| ST0184 | STEEL COMP 90-60 |
| ST0394 | STEEL COMP A7 |
| ST0030 | STEEL COMP E52100 |
| ST0413 | STEEL COMP H21 |
| ST0415 | STEEL COMP H22 |
| ST0325 | STEEL COMP M15 |
| ST0049 | STEEL COMP MTX1015 |
| ST0344 | STEEL COMP T7 |
| ST0702 | STEEL COMP XM-10 |
| ST0703 | STEEL COMP XM-11 |
| ST0704 | STEEL COMP XM-12 |
| ST0706 | STEEL COMP XM-15 |
| ST0712 | STEEL COMP XM-21 |
| ST0715 | STEEL COMP XM-26 |
| ST0716 | STEEL COMP XM-27 |
| ST9851 | STEEL COMP XM-34 |
| STB000 | STEEL CORROSION RESISTING |
| STC000 | STEEL STAINLESS - USE STB000 |
| ST1097 | STEEL UNS J02502 |
| ST1098 | STEEL UNS J02503 |
| ST1099 | STEEL UNS J03002 |
| ST0594 | STEEL UNS J03008 |
| ST0602 | STEEL UNS J03009 |
| ST0603 | STEEL UNS J03504 |
| ST1598 | STEEL UNS J05002 |
| ST1599 | STEEL UNS J12047 |
| ST0689 | STEEL UNS J12070 |
| ST1123 | STEEL UNS J12072 |
| ST1000 | STEEL UNS J12520 |
| ST0644 | STEEL UNS J12522 |
| ST1142 | STEEL UNS J13080 |
| ST0690 | STEEL UNS J21880 |
| ST1150 | STEEL UNS J21890 |
| ST1827 | STEEL UNS J32075 |
| ST1762 | STEEL UNS J42015 |
| ST0567 | STEEL UNS J91150 |
| ST1475 | STEEL UNS J91161 |
| ST1477 | STEEL UNS J91631 |
| ST1836 | STEEL UNS J92200 |
| ST1168 | STEEL UNS J92500 |
| ST1169 | STEEL UNS J92600 |
| ST1170 | STEEL UNS J92602 |
| ST1465 | STEEL UNS J92620 |
| ST0623 | STEEL UNS J92650 |
| ST1175 | STEEL UNS J92700 |
| ST1177 | STEEL UNS J92710 |
| ST0624 | STEEL UNS J92730 |
| ST1178 | STEEL UNS J92800 |
| ST0599 | STEEL UNS J92811 |
| ST1180 | STEEL UNS J92900 |
| ST0625 | STEEL UNS J92910 |
| ST1181 | STEEL UNS J92971 |
| ST1186 | STEEL UNS J93400 |
| ST1187 | STEEL UNS J93401 |
| ST1188 | STEEL UNS J93402 |
| ST1196 | STEEL UNS J94013 |
| ST1197 | STEEL UNS J94202 |
| ST1198 | STEEL UNS J94203 |
| ST1457 | STEEL UNS J94211 |
| ST1206 | STEEL UNS J94603 |
| ST1217 | STEEL UNS J95150 |
| ST1247 | STEEL UNS K02002 |
| ST0569 | STEEL UNS K02501 |
| ST0570 | STEEL UNS K03006 |
| ST0571 | STEEL UNS K03501 |
| ST1300 | STEEL UNS K03502 |
| ST0639 | STEEL UNS K03504 |
| ST1348 | STEEL UNS K07200 |
| ST1004 | STEEL UNS K11564 |
| ST1007 | STEEL UNS K11572 |
| ST1370 | STEEL UNS K11578 |
| ST1383 | STEEL UNS K12032 |
| ST0591 | STEEL UNS K12122 |
| ST1393 | STEEL UNS K12211 |
| ST1001 | STEEL UNS K12220 |
| ST1002 | STEEL UNS K13020 |
| ST0566 | STEEL UNS K21590 |
| ST1493 | STEEL UNS K22103 |
| ST0532 | STEEL UNS K24065 |
| ST1028 | STEEL UNS K42544 |
| ST1056 | STEEL UNS K91151 |
| SNA000 | TIN ALLOY |
| TTB000 | TITANIUM |
| TTA000 | TITANIUM ALLOY |
| TT0052 | TITANIUM ALLOY UNS R56400 |
| TT0054 | TITANIUM ALLOY UNS R56440 |
| TNA000 | TUNGSTEN |
| TNB000 | TUNGSTEN CARBIDE |
| ZNB000 | ZINC |
| ZNA000 | ZINC ALLOY |
| ZRB000 | ZIRCONIUM |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3BAU | SEAT |
| 3BCM | FLOW CONTROL DEVICE |
| 3BKI | STEM |
| 3DLU | PACKING |
| 3DTD | BODY LINING |
| 3DTE | DISK |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
IF STYLE/REPLY CODE(s) B, C, D OR E WERE ENTERED FOR MRC ADSR, YOU MUST ANSWER MRC (ADST)
ADSRDBONNET TYPE
INDICATES THE TYPE OF HOUSING ON THE ITEM THAT ACCOMMODATES THE STEM PACKING OR SPRING.
Enter the applicable reply code from the table below
(ADSRDG)
| Table 1 |
| Reply Code (AC62) | Reply |
| B | EXPOSED SPRING |
| C | INSIDE SCREW |
| D | INSIDE SPRING |
| E | OUTSIDE SCREW-YOKE |
| G | PACKING RETAINING |
ADST*DBONNET ATTACHMENT METHOD
THE MEANS BY WHICH THE BONNET IS ATTACHED TO THE ITEM.
Enter the applicable reply code from the table below
(ADSTDAL*;ADSTDAQ$DAS*)
| Table 1 |
| Reply Code (AB47) | Reply |
| AK | BOLTED |
| AB | CLAMP |
| AL | INTEGRAL |
| AM | PRESSURE SEAL, RING TYPE |
| AP | THREADED |
| AR | U-BOLT |
| AQ | UNION |
| AS | WELDED |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(SFTTDXXA000*;SFTTDLQA000$DENA000*;SFTTDLQA000$$DENA000*)
| Table 1 |
| Reply Code (SF01) | Reply |
| AL1100 | ALUMINUM ALLOY 1100 |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CMA000 | CHROMATE |
| CMB000 | CHROMATE ZINC |
| CRA000 | CHROMIUM |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| DCA000 | DICHROMATE |
| ENA000 | ENAMEL |
| AUA000 | GOLD |
| GFA000 | GRAPHITE |
| LQA000 | LACQUER |
| MTB000 | MOLYBDENUM |
| NLA000 | NICKEL |
| XXB000 | OXIDE |
| XXA000 | OXIDE FILM |
| PNA000 | PAINT |
| PSA000 | PASSIVATE |
| PHA000 | PHOSPHATE |
| PCAJ00 | PLASTIC CELLULOSE NITRATE |
| PCB000 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCY000 | PLASTIC POLYURETHANE |
| PCAN00 | PLASTIC TETRAFLUOROETHYLENE |
| PRA000 | PRIMER |
| SNA000 | TIN |
| VAA000 | VARNISH |
| ZNA000 | ZINC |
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
CWCF*JFACE TO FACE DISTANCE
THE FACE TO FACE DISTANCE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCFJL2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCL*JFIRST CONNECTION FACE TO CENTERLINE DISTANCE
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCLJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCR*JSECOND CONNECTION FACE TO CENTERLINE DISTANCE
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCRJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCW*JTHIRD CONNECTION FACE TO CENTERLINE DISTANCE
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCWJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCZ*JFOURTH CONNECTION FACE TO CENTERLINE DISTANCE
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCZJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWDD*JCENTER TO CENTER DISTANCE
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWDDJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
ACJN*JOFFSET DISTANCE
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACJNJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CCFG*JVALVE SIZE
DESIGNATES THE SIZE OF THE VALVE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CCFGJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
MEDA*DMEDIA FOR WHICH DESIGNED
THE TYPE OF MEDIA FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MEDA3AEEDAGV*;MEDA3AEEDAGV$DACM*;MEDA3AEEDAGV$$DACM*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3DQY | FIRST RESPONSE |
| 3DQZ | SECOND RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN91) | Reply |
| AAB | ACETYLENE |
| ACH | ACID, NITRIC |
| AAE | AIR |
| AAF | ALCOHOL, ETHYL |
| AGQ | ALCOHOL, ISOPROPYL |
| AAG | ALCOHOL, METHYL |
| AAH | AMMONIA, GASEOUS |
| AAJ | AMMONIA, LIQUID |
| AAK | BROMOCHLOROMETHANE |
| AGR | BROMOTRIFLUOROMETHANE |
| AAL | BUTANE |
| ABY | CALCIUM SOLUTION |
| AAM | CARBON DIOXIDE |
| ABZ | CARBON TETRACHLORIDE |
| ACA | CHLORINE |
| ADR | DEVELOPER, PHOTOGRAPHIC |
| AGS | ETHER |
| AAN | ETHYLENE GLYCOL |
| AAY | FUEL/OIL, HYDROCARBON |
| ABA | GAS, INERT |
| ABD | GAS, NATURAL |
| ACC | HELIUM |
| AGT | HYDRAULIC FLUID, MINERAL BASE |
| ACD | HYDRAULIC FLUID, PETROLEUM BASE |
| AAW | HYDRAULIC FLUID, PHOSPHATE-ESTER BASE |
| AAX | HYDRAULIC FLUID, SILICATE-ESTER BASE |
| ACF | HYDRAZINE |
| ACG | HYDRAZINE/UNSYMMETRIC DIMETHYL HYDRAZINE |
| AAZ | HYDROGEN |
| ADF | LIQUID |
| ABB | LIQUID, INGESTED |
| AGU | MERCURY |
| AGV | METHYL CHLORIDE |
| ABE | NITROGEN, GASEOUS |
| ABF | NITROGEN, LIQUID |
| ABG | NITROGEN, TETRAOXIDE |
| AGW | NITROUS OXIDE |
| ACJ | OIL |
| ACB | OIL, CHLORINATED TRANSFORMER |
| ACE | OIL, HYDRAULIC |
| ABC | OIL, LUBRICATING, DIESTER BASE |
| ABJ | OXYGEN, GASEOUS |
| ABK | OXYGEN, LIQUID |
| ACK | PROPANE |
| AFE | REFRIGERANT 114 |
| ABM | REFRIGERANT 12 |
| ACM | REFRIGERANT 22 |
| AHA | REFRIGERANT 500 |
| AHB | REFRIGERANT 502 |
| AEV | REFRIGERANT, FLUORINATED |
| ACL | REFRIGERANT, HALOGENATED |
| AGX | SILICON FLUID |
| ABP | STEAM |
| AGY | SULFUR HEXAFLUORIDE, GASEOUS |
| ACN | SULPHUR DIOXIDE, GASEOUS |
| AGZ | TITANIUM TETRACHLORIDE |
| ABQ | TRICHLOROETHYLENE |
| ADK | VACUUM |
| ACT | WASTE PRODUCT |
| ABS | WATER, FRESH |
| ABT | WATER, SALT |
| ACP | WATER-OIL-GAS |
CQGM*JMAXIMUM OPERATING PRESSURE
THE MAXIMUM PRESSURE AT WHICH THE ITEM IS RATED FOR OPERATION.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQGM3DQXJK2.0*;CQGM3DQXJK2.0$JK2.0*;CQGM3DQXJK2.0$$JK2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3DQY | FIRST RESPONSE |
| 3DQZ | SECOND RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN71) | Reply |
| B | BAR |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
AEHZ*JMAXIMUM OPERATING TEMP
THE MAXIMUM TEMPERATURE AT WHICH THE ITEM IS RATED TO OPERATE FOR AN EXTENDED PERIOD OF TIME.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEHZ3DQXJC2.0*;AEHZ3DQXJC2.0$JC2.0*;AEHZ3DQXJC2.0$$JC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3DQY | FIRST RESPONSE |
| 3DQZ | SECOND RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
IF STYLE/REPLY CODE(s) AF, AJ OR BD WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (AHNC and AAAR)
IF STYLE/REPLY CODE(s) AB, AD OR BE WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (AHNC and CWFD)
IF STYLE/REPLY CODE(s) BF WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (ARKN and CWDF)
IF STYLE/REPLY CODE(s) AC, AE, AG, AP, AR, AV, AW, WR, WS OR WY WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (AHNC and THSD)
IF STYLE/REPLY CODE(s) AA WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (AHNC and CWFD and THSD)
IF STYLE/REPLY CODE(s) AQ OR WZ WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (AHNC)
IF STYLE/REPLY CODE(s) AS WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (AHNC)
AWLS*DCONNECTION TYPE
INDICATES THE TYPE OF CONNECTION/S/.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AWLS3AIBDAC*;AWLS3AIBDAC$DAV*;AWLS3AIBDAC$$DAV*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3AIC | FOURTH END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB76) | Reply |
| BD | BUTT WELD PIPE |
| BE | BUTT WELD TUBE |
| BF | FLANGE |
| WY | THREADED CARTRIDGE |
| AW | THREADED EXTERNAL BOSS |
| WR | THREADED EXTERNAL GAS FITTING |
| AR | THREADED EXTERNAL HOSE |
| AG | THREADED EXTERNAL PIPE |
| AC | THREADED EXTERNAL TUBE |
| AV | THREADED INTERNAL BOSS |
| WS | THREADED INTERNAL GAS FITTING |
| AP | THREADED INTERNAL HOSE |
| AE | THREADED INTERNAL PIPE |
| AA | THREADED INTERNAL TUBE |
| WZ | UNTHREADED CARTRIDGE |
| AS | UNTHREADED EXTERNAL HOSE |
| AJ | UNTHREADED EXTERNAL PIPE |
| AD | UNTHREADED EXTERNAL TUBE |
| AQ | UNTHREADED INTERNAL HOSE |
| AF | UNTHREADED INTERNAL PIPE |
| AB | UNTHREADED INTERNAL TUBE |
IF STYLE/REPLY CODE(s) G7, G11, G12, G42, G43, G45, G47, G1A, G1B, G2A, G2B, G10A, G10B, G41A, G41B OR G41C WERE ENTERED FOR MRC AHNC, YOU MUST ANSWER MRC (CQRB)
AHNC*LCONNECTION STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE CONNECTION.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(AHNC3AEXLG49B*;AHNC3AEXLG49B$LG22A*;AHNC3AEXLG49B$$LG22A*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| DR03481 | G10A | INVERTED FLARE(TUBE) |
| DR03482 | G10B | INVERTED FLARE(PIPE) |
| BU10175 | G11 | DOUBLE COMPRESSION(TUBE) |
| BU10177 | G12 | HIGH PRESSURE FLARE(TUBE) |
| DR00935 | G1A | SWIVEL NUT, INVERTED FLARE(TUBE) |
| DR00936 | G1B | SWIVEL NUT, INVERTED FLARE (PIPE) |
| DR00956 | G20A | SOCKET (TUBE) |
| DR00957 | G20B | SOCKET |
| DR00958 | G21A | STREAMLINED WITH ONE BRAZING RING (TUBE) |
| DR00959 | G21B | STREAMLINED WITH ONE BRAZING RING |
| DR00960 | G22A | STREAMLINED WITH TWO BRAZING RINGS (TUBE) |
| DR00961 | G22B | STREAMLINED WITH TWO BRAZING RINGS |
| DR00962 | G23A | REDUCED SOCKET (TUBE) |
| DR00963 | G23B | REDUCED SOCKET |
| DR00964 | G24A | REDUCED SOCKET ONE BRAZING RING (TUBE) |
| DR00965 | G24B | REDUCED SOCKET WITH ONE BRAZING RING |
| DR00966 | G25A | REDUCED SOCKET SEAL (TUBE) |
| DR00967 | G25B | REDUCED GASKET SEAL |
| BU10184 | G26 | PLAIN (TUBE) |
| BU10185 | G27 | CRIMPED (TUBE) |
| BU10186 | G28 | GROOVED INSIDE |
| BU10187 | G29 | HOSE SOCKET (HOSE) |
| DR00937 | G2A | SWIVEL NUT, FLARE(TUBE) |
| DR00938 | G2B | SWIVEL NUT, FLARE(PIPE) |
| DR00968 | G30A | SOCKET WITH BRAZING RING (TUBE) |
| DR00969 | G30B | SOCKET WITH BRAZING RING |
| BU10189 | G31 | GASKET SEAL (PIPE) |
| BU10190 | G32 | BELL (PIPE) |
| DR00939 | G3A | SWIVEL NUT,GASKET SEAL(TUBE) |
| DR00940 | G3B | SWIVEL NUT,GASKET SEAL(PIPE) |
| DR00941 | G3C | SWIVEL NUT,GASKET SEAL(HOSE) |
| DR00942 | G3D | SWIVEL NUT,GASKET SEAL(GAS FITTING) |
| BU10168 | G4 | GASKET SEAL(BOSS) |
| BU10191 | G40 | GASKET SEAL COMPRESSION (TUBE) |
| DR00970 | G41A | INVERTED FLARE (TUBE) |
| DR00971 | G41B | INVERTED FLARE (PIPE) |
| DR00972 | G41C | INVERTED FLARE (GAS FITTING) |
| BU10193 | G42 | FLARED (TUBE) |
| BU10194 | G43 | EXTERNAL SEAT FOR GASKET SEAL (BOSS) |
| BU10195 | G44 | COMPRESSION (TUBE) |
| BU10196 | G45 | FLARELESS (TUBE) |
| DR00973 | G46A | PLAIN (TUBE) |
| DR00974 | G46B | PLAIN (PIPE) |
| DR00975 | G46C | PLAIN (HOSE) |
| DR00976 | G46D | PLAIN (SCREW-IN CARTRIDGE) |
| BU10198 | G47 | SWIVEL NUT, INVERTED FLARE (TUBE) |
| DR01397 | G48A | SWIVEL, PLAIN (TUBE) |
| DR01398 | G48B | SWIVEL, PLAIN (PIPE) |
| DR01399 | G48C | SWIVEL, PLAIN (HOSE) |
| DR01400 | G49A | GASKET SEAL (TUBE) |
| DR01401 | G49B | GASKET SEAL (PIPE) |
| DR01402 | G49C | GASKET SEAL (HOSE) |
| DR01403 | G49D | GASKET SEAL (GAS FITTING) |
| BU10201 | G50 | EXTERNAL SEAT FOR GASKET SEAL (BOSS) |
| DR01404 | G51A | SWIVEL NUT, FLARED (TUBE) |
| DR01405 | G51B | SWIVEL NUT, FLARED (PIPE) |
| BU10203 | G52 | SWIVEL NUT, DOUBLE COMPRESSION (TUBE) |
| BU10204 | G53 | DOUBLE THREADED SECTION BOSS FITTING GASKET WITH LOCKNUT SEALING (BOSS) |
| BU10205 | G54 | FLARED (TUBE) |
| DR00943 | G5A | FLARE(TUBE) |
| DR00955 | G5B | FLARE(GAS FITTING) |
| BU10170 | G6 | SWIVEL NUT,COMPRESSION(TUBE) |
| DR01406 | G60A | PLAIN (TUBE) |
| DR01407 | G60B | PLAIN (PIPE) |
| DR01408 | G60C | PLAIN (HOSE) |
| DR01409 | G61A | GROOVED (TUBE) |
| DR01410 | G61B | GROOVED (PIPE) |
| DR01411 | G61C | GROOVED (DROP-IN CARTRIDGE) |
| BU10208 | G62 | BEADED (HOSE) |
| BU10209 | G63 | BEADED (HOSE) |
| DR01412 | G64A | PLAIN BEVELED (PIPE) |
| DR01413 | G64B | PLAIN BEVELED (HOSE) |
| BU10211 | G65 | BARBED-BEADED (HOSE) |
| BU10212 | G66 | DOUBLE BEADED (HOSE) |
| BU10213 | G67 | MULTI-GROOVED (HOSE) |
| BU10171 | G7 | SWIVEL NUT,FLARELESS(TUBE) |
| DR01414 | G70A | BEVELED (TUBE) |
| DR01415 | G70B | BEVELED (PIPE) |
| DR00418 | G71A | BEVELED (TUBE) |
| DR00419 | G71B | BEVELED (PIPE) |
| DR00788 | G72A | BEVELED (TUBE) |
| DR00789 | G72B | BEVELED (PIPE) |
| BU10172 | G8 | SWIVEL NUT(GAS FITTING) |
| BU10173 | G9 | PLAIN,OPTIONAL END(PIPE) |
CQRB*JSEAT ANGLE
THE ANGLE OF THE END SURFACE UPON WHICH THE MATED SURFACE SEATS.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQRB3AEEJD2.0*;CQRB3AEEJD2.0$JD2.0*;CQRB3AEEJD2.0$$JD2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP38) | Reply |
| D | DEGREES |
| R | RADIANS |
IF STYLE/REPLY CODE(s) AHH WERE ENTERED FOR MRC ARKN, YOU MUST ANSWER MRC (CWCK)
IF STYLE/REPLY CODE(s) BKN OR BKP WERE ENTERED FOR MRC ARKN, YOU MUST ANSWER MRC (CWCK and AECS and CWCQ and CWCT)
IF STYLE/REPLY CODE(s) BKQ OR BKT WERE ENTERED FOR MRC ARKN, YOU MUST ANSWER MRC (CWCK and AKGG and AKGF and AECS and CWCQ and CWCT)
IF STYLE/REPLY CODE(s) AND WERE ENTERED FOR MRC ARKN, YOU MUST ANSWER MRC (CWCK and AKGG and AKGF)
IF STYLE/REPLY CODE(s) BKR WERE ENTERED FOR MRC ARKN, YOU MUST ANSWER MRC (CWCK and AKGG and AKGF and AECS and CWCQ and CWCY and CWDC)
IF STYLE/REPLY CODE(s) APL WERE ENTERED FOR MRC ARKN, YOU MUST ANSWER MRC (CWCD and CWCK)
IF STYLE/REPLY CODE(s) BKS WERE ENTERED FOR MRC ARKN, YOU MUST ANSWER MRC (CWCD and CWCK and AECS and CWCQ and CWCT)
ARKN*DFLANGE SHAPE
THE PHYSICAL CONFIGURATION OF THE FLANGE.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ARKN3AEEDBKS*;ARKN3AEEDBKS$DAHH*;ARKN3AEEDBKS$$DAHH*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD07) | Reply |
| AHH | HEXAGON |
| BKN | HEXAGON WITH HOLES |
| BKP | OCTAGON WITH HOLES |
| BKQ | OVAL WITH HOLES |
| AND | RECTANGULAR |
| BKR | RECTANGULAR WITH HOLES |
| APL | ROUND |
| BKS | ROUND WITH HOLES |
| BKT | TRIANGULAR WITH HOLES |
Reference NotesRefer to Reference Drawings for assitance in answering this MRC.
CWCD*JNOMINAL OUTSIDE DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF AN ITEM,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCD3AETJA2.0*;CWCD3AETJA2.0$JA2.0*;CWCD3AETJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCK*JNOMINAL THICKNESS
A NOMINAL MEASUREMENT OF THE SMALLEST DIMENSION OF AN ITEM,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCK3AEXJA2.0*;CWCK3AEXJA2.0$JA2.0*;CWCK3AEXJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AKGG*JNOMINAL LENGTH
A NOMINAL MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKGG3HOUJA2.0*;AKGG3HOUJA2.0$JA2.0*;AKGG3HOUJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AKGF*JNOMINAL WIDTH
A NOMINAL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKGF3HOUJA2.0*;AKGF3HOUJA2.0$JA2.0*;AKGF3HOUJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AECS*ABOLT HOLE QUANTITY
THE NUMBER OF BOLT HOLES PROVIDED ON THE ITEM.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(AECS3AETA10)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CWCQ*JBOLT HOLE NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE BOLT HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCQ3AIBJA2.0*;CWCQ3AIBJA2.0$JA2.0*;CWCQ3AIBJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCT*JBOLT CIRCLE NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE BOLT CIRCLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCT3AEUJA2.0*;CWCT3AEUJA2.0$JA2.0*;CWCT3AEUJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCY*JCENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH
THE CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG THE LENGTH OF AN ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCY3AEEJA2.0*;CWCY3AEEJA2.0$JA2.0*;CWCY3AEEJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWDC*JCENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH
THE CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG THE WIDTH OF AN ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWDC3AEXJA2.0*;CWDC3AEXJA2.0$JA2.0*;CWDC3AEXJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWDF*DFLANGE FACE DESIGN
THE DESIGN OF THE FLANGE FACE.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CWDF3AEEDBF*;CWDF3AEEDBF$DAW*;CWDF3AEEDBF$$DAW*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH33) | Reply |
| AH | PLAIN |
| AW | PLAIN SWIVEL |
| AZ | RAISED STRAIGHT |
| BA | RAISED SWIVEL |
| BC | RAISED WITH CURVE AND COUNTERBORE |
| BD | RAISED WITH CURVE AND RADIUS |
| BF | RECESSED STRAIGHT |
| BG | RECESSED WITH GASKET GROOVE |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
AAAR*JNOMINAL PIPE SIZE ACCOMMODATED
A MEASUREMENT OF THE PIPE SIZE THE ITEM WILL ACCOMMODATE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAAR3AETJA2.0*;AAAR3AETJA2.0$JA2.0*;AAAR3AETJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWFD*JNOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE ACCOMMODATED TUBE,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWFD3AEUJA2.0*;CWFD3AEUJA2.0$JA2.0*;CWFD3AEUJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
IF STYLE/REPLY CODE(s) AM, JC, JE, JF, NC, NE, NF OR SA WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJD and AAJF)
IF STYLE/REPLY CODE(s) AN, BF, BR, BS, BW, FB, MT, NG, NP, NT, PF, PL, PM, PP, PS, PT, SF, SH OR ZP WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJF)
IF STYLE/REPLY CODE(s) RD WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CQQR)
IF STYLE/REPLY CODE(s) JS, NJ, NS OR UN WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP and AAJD and AAJF)
IF STYLE/REPLY CODE(s) EM, MJ, SJ, SK, SM OR SS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CQQR and AAJF)
IF STYLE/REPLY CODE(s) NH WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP and AAJF)
IF STYLE/REPLY CODE(s) NM WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP) or (CQQR and AAJF)
THSD*DTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(THSD3AIBDNS*;THSD3AIBDNS$DNT*;THSD3AIBDNS$$DNT*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH06) | Reply |
| AM | ACME |
| AN | ANPT |
| BF | BSF |
| ZP | BSP. L |
| FB | BSP.F |
| PL | BSP.PL |
| BS | BSP.TR EXT |
| BR | BSP.TR INT |
| BW | BSW |
| SM | ISO M |
| SS | ISO S |
| EM | M |
| MJ | MJ |
| NG | NGO |
| NH | NH |
| SF | NPSF |
| SH | NPSH |
| PS | NPSI |
| PM | NPSM |
| NP | NPT |
| NT | NPTF |
| PT | PTF-SAE SHORT |
| PP | PTF-SPL |
| PF | PTF-SPL SHORT |
| RD | ROUND |
| SJ | SI |
| SK | SI-M |
| SA | STUB ACME |
| MT | SUBMARINE THD |
| UN | UN |
| NC | UNC |
| NE | UNEF |
| NF | UNF |
| NJ | UNJ |
| JC | UNJC |
| JE | UNJEF |
| JF | UNJF |
| JS | UNJS |
| NM | UNM |
| NS | UNS |
CQJX*JNOMINAL THREAD SIZE
A DESIGNATION THAT IS USED FOR THE PURPOSE OF GENERAL IDENTIFICATION OF THE THREAD.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQJX3AEUJA2.0*;CQJX3AEUJA2.0$JA2.0*;CQJX3AEUJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CMLP*ATHREAD QUANTITY PER INCH
THE NUMBER OF THREADS ON THE ITEM PER LINEAR INCH MEASURED ON A LINE PARALLEL TO THE THREAD AXIS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(CMLP3AEEAA0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AAJD*ATHREAD CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(AAJD3AETAJ7)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CQQR*BTHREAD PITCH IN MILLIMETERS
A MEASUREMENT OF DISTANCE BETWEEN CORRESPONDING POINTS ON TWO ADJACENT THREADS MEASURED PARALLEL TO THE THREAD AXIS,EXPRESSED IN MILLIMETERS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(CQQR3AEEB2.0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AAJF*DTHREAD DIRECTION
THE DIRECTION OF THE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AAJF3AIBDAAG*;AAJF3AIBDAAG$DAAL*;AAJF3AIBDAAG$$DAAL*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA38) | Reply |
| AAG | LEFT-HAND |
| AAL | RIGHT-HAND |
ADZH*DRENEWABLE SEAT RING TYPE
INDICATES THE TYPE OF RENEWABLE SEATING RING IN THE ITEM.
Enter the applicable reply code from the table below
(ADZHDAC*;ADZHDAB$DAA*)
| Table 1 |
| Reply Code (AC69) | Reply |
| AA | BOLTED |
| AB | BONDED |
| AC | PRESSED-IN |
| AD | RETAINING SCREW |
| AE | THREADED |
| AF | WELDED |
AZGM*DMOUNTING FACILITY
THE FACILITY FOR MOUNTING THE ITEM.
Enter the applicable reply code from the table below
(AZGMDBJY)
| Table 1 |
| Reply Code (AM39) | Reply |
| ABC | BRACKET |
| BJY | BULKHEAD |
| ABH | CLAMP |
| ABN | LUG |
| AED | PANEL |
| AKB | THREADED FASTENER |
| BWX | WAFER |
TMQY*JFURNISHED ITEMS AND QUANTITY
THE NAME AND NUMBER OF THOSE PARTS FURNISHED WITH THE ITEM OF SUPPLY THAT HAVE NOT BEEN SPECIFIED ELSEWHERE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(TMQYJABR2*;TMQYJABR2$$JABR3*)
| Table 1 |
| Reply Code (AB28) | Reply |
| ACH | ADAPTER |
| ABR | BOLT |
| ACJ | BRAZING RING |
| AJM | BUSHING |
| ACK | BY-PASS |
| AEL | CAP |
| AMM | CHAIN |
| BFG | CHAIN WHEEL |
| BFH | COUNTERWEIGHT |
| BFJ | COUPLING |
| AKG | COVER |
| BFK | DEFLECTOR CAP |
| BFL | ELECTRICAL CONNECTOR |
| AKH | FERRULE |
| AZA | FILTER |
| AHD | FILTER SCREEN |
| BFM | FLANGED DRAIN |
| ACM | FLOAT |
| BFN | FLOAT CONTROL ASSEMBLY |
| BFP | FLOAT ROD |
| ADL | FRICTION RING |
| ACN | GASKET |
| ADM | GROMMET |
| AQF | HANDLE |
| BFQ | HANDWHEEL |
| BLH | INDICATOR |
| BFR | INSULATING BLANKET |
| AKX | INSULATION SLEEVING |
| BFS | LEVER |
| ASC | LOCKING DEVICE |
| AEK | MOUNTING BRACKET |
| ABW | NUT |
| BFT | OPEN DRAIN |
| AEZ | ORIFICE PLATE |
| BFU | PEDAL |
| ACR | PLUGGED DRAIN |
| BFV | PNEUMATIC FUSE |
| BFW | REDUCER |
| BFX | RELIEF PLUG |
| BFY | RUBBER CONE WASHER |
| BFZ | SALINITY CELL |
| ACW | SIGHT GAGE |
| AMY | SPRING |
| BGA | SPUD END COUPLING |
| BGB | STEM TEST CONNECTION |
| AFM | STRAINER |
| BGC | STRAINER ELEMENT |
| ARQ | STRAP |
| ACY | SURGE PROTECTIVE CAPACITOR |
| ABH | SWITCH |
| ACZ | TAILPIECE |
| AJW | WASHER |
| ADA | WRENCH |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDCLU*;CBBLDAAZ$$DAAW*)
| Table 1 |
| Reply Code (AN47) | Reply |
| AAW | ADJUSTABLE ROTATION STOP |
| AAX | BONNET PACKING |
| CLU | LINE DRILLED |
| CLV | LINE SELF-PIERCING |
| CRK | MANUAL OVERRIDE |
| AAZ | NONADJUSTABLE ROTATION |
| ABA | PRESSURE TIGHT OUTLET SIDE |
| ABB | VALVE STEM LOCK SHIELD |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDG4)
| Table 1 |
| Reply Code (EN02) | Reply |
| G4 | COMPREHENSIVE PROCUREMENT GUIDELINE - VEHICULAR PRODUCTS - REBUILT VEHICULAR PARTS |
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ030*;HZRDDHAZ012$$DHAZ042*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ042 | ASBESTOS |
| HAZ008 | CADMIUM |
| HAZ011 | CHROMIUM |
| HAZ012 | COPPER |
| HAZ029 | LEAD |
| HAZ030 | MAGNESIUM ALLOY |
| HAZ052 | ZINC |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)