An item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
expandFSC Information
5975Electrical Hardware and Supplies
expandColloquial Information
J2322BUSHING,ELECTRICAL CONNECTOR
expandChange List
ISAC Reply 3AAT added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3BDD added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 1A deleted from MRC MATT.
ISAC Reply 1B deleted from MRC MATT.
ISAC Reply 3AAT added to MRC MDCL.
ISAC Reply 3AEE added to MRC MDCL.
ISAC Reply 3BDD added to MRC MDCL.
ISAC Reply 3HOU added to MRC MDCL.
ISAC Reply 1A deleted from MRC MDCL.
ISAC Reply 1B deleted from MRC MDCL.
ISAC Reply 3AAT added to MRC SFTT.
ISAC Reply 3AEE added to MRC SFTT.
ISAC Reply 3HOU added to MRC SFTT.
ISAC Reply 1A deleted from MRC SFTT.
ISAC Reply 1B deleted from MRC SFTT.
ISAC Reply 3AAT added to MRC STDC.
ISAC Reply 3AEE added to MRC STDC.
ISAC Reply 3HOU added to MRC STDC.
ISAC Reply 1A deleted from MRC STDC.
ISAC Reply 1B deleted from MRC STDC.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED04455*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3BDDDST1113*;MATT3BDDDST1113$DWDC000*;MATT3BDDDST1113$$DWDC000*)
Table 1
ISAC Field Indicator (5000)Location
3AATBODY
3AEEOVERALL
3BDDINSULATOR
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (MA01)Reply
ALA000ALUMINUM
ALB000ALUMINUM ALLOY
AL2011ALUMINUM ALLOY 2011
AL2017ALUMINUM ALLOY 2017
AL2024ALUMINUM ALLOY 2024
AL5052ALUMINUM ALLOY 5052
AL6061ALUMINUM ALLOY 6061
AL0030ALUMINUM ALLOY A413.0
ASA000ASBESTOS
CLD000CERAMIC
CUA000COPPER
CUB000COPPER ALLOY
CU0068COPPER ALLOY 170
CU0069COPPER ALLOY 172
CU0233COPPER ALLOY 173
CU0074COPPER ALLOY 230
CU0076COPPER ALLOY 240
CU0079COPPER ALLOY 260
CU0304COPPER ALLOY 262
CU0080COPPER ALLOY 268
CU0081COPPER ALLOY 270
CU0272COPPER ALLOY 272
CU0274COPPER ALLOY 274
CU0302COPPER ALLOY 280
CU0330COPPER ALLOY 330
CU0305COPPER ALLOY 331
CU0332COPPER ALLOY 332
CU0335COPPER ALLOY 335
CU0340COPPER ALLOY 340
CU0088COPPER ALLOY 342
CU0306COPPER ALLOY 344
CU0307COPPER ALLOY 345
CU0308COPPER ALLOY 347
CU0309COPPER ALLOY 348
CU0310COPPER ALLOY 350
CU0089COPPER ALLOY 353
CU0090COPPER ALLOY 356
CU0091COPPER ALLOY 360
CU0370COPPER ALLOY 370
CU0092COPPER ALLOY 377
CU0098COPPER ALLOY 462
CU0099COPPER ALLOY 464
CU0465COPPER ALLOY 465
CU0466COPPER ALLOY 466
CU0467COPPER ALLOY 467
CU0100COPPER ALLOY 482
CU0101COPPER ALLOY 485
CU0103COPPER ALLOY 510
CKA000CORK
CCA000COTTON
CCB000COTTON DUCK
CPE000ELASTOMER POLYCHLOROPRENE
FBA000FIBER
GSA000GLASS
GSB000GLASS FIBER
FEA000IRON
FEB000IRON CAST
FEC000IRON MALLEABLE
PBA000LEAD
PBB000LEAD ALLOY
LRA000LEATHER
FBH000LINEN
MGA000MAGNESIUM
NLA000NICKEL
NLB000NICKEL ALLOY
FBB000NYLON
PPA000PAPER
PCA000PLASTIC
PCE000PLASTIC ALKYD
PCG000PLASTIC DIALLYL PHTHALATE
PCBY00PLASTIC ETHYL CELLULOSE
PCK000PLASTIC METHYL METHACRYLATE
PCM000PLASTIC PHENOL-FORMALDEHYDE
PCN000PLASTIC PHENOLIC
PCP000PLASTIC POLYAMIDE (NYLON)
PCR000PLASTIC POLYCARBONATE
ZSB000PLASTIC POLYCHLOROPRENE
PCW000PLASTIC POLYESTER
PCX000PLASTIC POLYETHYLENE
PCY000PLASTIC POLYETHYLENE TEREPHTHALATE
PCAB00PLASTIC POLYOLEFIN
PCAAAAPLASTIC POLYPHENYLENE OXIDE
PCAF00PLASTIC POLYTETRAFLUOROETHYLENE
PCAH00PLASTIC POLYURETHANE
PCAJ00PLASTIC POLYVINYL CHLORIDE (PVC)
PCBA00PLASTIC URETHANE
PCAP00PLASTIC VINYL
PCAAA0PLASTIC VINYL ACETATE
PCDA01POLYAMIDE NYLON
FBC000POLYESTER
CLB000PORCELAIN
FBD000RAYON
RCE000RUBBER
RCF000RUBBER BUNA N
RCG000RUBBER BUNA S
RCD000RUBBER CHLOROPRENE
RCA000RUBBER NATURAL
RCAC00RUBBER NEOPRENE
RCC000RUBBER SILICONE
RCB000RUBBER SYNTHETIC
RCK000RUBBER SYNTHETIC-NATURAL
RCR000RUBBER URETHANE
AGA000SILVER
AGF000SILVER ALLOY
STA000STEEL
ST1008STEEL COMP 1008
ST1009STEEL COMP 1009
ST1010STEEL COMP 1010
ST1011STEEL COMP 1011
ST1012STEEL COMP 1012
ST1013STEEL COMP 1013
ST1015STEEL COMP 1015
ST1016STEEL COMP 1016
ST1017STEEL COMP 1017
ST1018STEEL COMP 1018
ST1019STEEL COMP 1019
ST1020STEEL COMP 1020
ST1021STEEL COMP 1021
ST1022STEEL COMP 1022
ST1023STEEL COMP 1023
ST1024STEEL COMP 1024
ST1025STEEL COMP 1025
ST1026STEEL COMP 1026
ST1027STEEL COMP 1027
ST1029STEEL COMP 1029
ST1030STEEL COMP 1030
ST1031STEEL COMP 1031
ST1033STEEL COMP 1033
ST1034STEEL COMP 1034
ST1035STEEL COMP 1035
ST1036STEEL COMP 1036
ST1037STEEL COMP 1037
ST1038STEEL COMP 1038
ST1039STEEL COMP 1039
ST1040STEEL COMP 1040
ST1041STEEL COMP 1041
ST1042STEEL COMP 1042
ST1043STEEL COMP 1043
ST1044STEEL COMP 1044
ST1045STEEL COMP 1045
ST1046STEEL COMP 1046
ST1048STEEL COMP 1048
ST1049STEEL COMP 1049
ST1050STEEL COMP 1050
ST1051STEEL COMP 1051
ST1052STEEL COMP 1052
ST1053STEEL COMP 1053
ST1054STEEL COMP 1054
ST1055STEEL COMP 1055
ST1059STEEL COMP 1059
ST1060STEEL COMP 1060
ST1061STEEL COMP 1061
ST1064STEEL COMP 1064
ST1065STEEL COMP 1065
ST1066STEEL COMP 1066
ST1069STEEL COMP 1069
ST1070STEEL COMP 1070
ST1071STEEL COMP 1071
ST1072STEEL COMP 1072
ST1074STEEL COMP 1074
ST1075STEEL COMP 1075
ST1078STEEL COMP 1078
ST1080STEEL COMP 1080
ST1084STEEL COMP 1084
ST1085STEEL COMP 1085
ST1086STEEL COMP 1086
ST1090STEEL COMP 1090
ST1095STEEL COMP 1095
ST1108STEEL COMP 1108
ST1109STEEL COMP 1109
ST1110STEEL COMP 1110
ST1112STEEL COMP 1112
ST1113STEEL COMP 1113
ST1115STEEL COMP 1115
ST1116STEEL COMP 1116
ST1117STEEL COMP 1117
ST1118STEEL COMP 1118
ST1119STEEL COMP 1119
ST1120STEEL COMP 1120
ST1126STEEL COMP 1126
ST1132STEEL COMP 1132
ST1137STEEL COMP 1137
ST1138STEEL COMP 1138
ST1139STEEL COMP 1139
ST1140STEEL COMP 1140
ST1141STEEL COMP 1141
ST1144STEEL COMP 1144
ST1145STEEL COMP 1145
ST1146STEEL COMP 1146
ST1151STEEL COMP 1151
ST1211STEEL COMP 1211
ST1212STEEL COMP 1212
ST1213STEEL COMP 1213
ST1330STEEL COMP 1330
ST1335STEEL COMP 1335
ST1340STEEL COMP 1340
ST1345STEEL COMP 1345
ST0201STEEL COMP 201
ST0202STEEL COMP 202
ST0301STEEL COMP 301
ST0302STEEL COMP 302
ST0303STEEL COMP 303
ST0079STEEL COMP 303SE
ST0304STEEL COMP 304
ST0080STEEL COMP 304L
ST0305STEEL COMP 305
ST0309STEEL COMP 309
ST0310STEEL COMP 310
ST0316STEEL COMP 316
ST0082STEEL COMP 316L
ST0317STEEL COMP 317
ST0321STEEL COMP 321
ST0323STEEL COMP 323
ST0347STEEL COMP 347
ST0348STEEL COMP 348
ST0403STEEL COMP 403
ST0405STEEL COMP 405
ST0410STEEL COMP 410
ST4130STEEL COMP 4130
ST0414STEEL COMP 414
ST4140STEEL COMP 4140
ST4150STEEL COMP 4150
ST0416STEEL COMP 416
ST0099STEEL COMP 416SE
ST0420STEEL COMP 420
ST0430STEEL COMP 430
ST0101STEEL COMP 430F
ST0172STEEL COMP 430FSE
ST0431STEEL COMP 431
ST4320STEEL COMP 4320
ST4340STEEL COMP 4340
ST0105STEEL COMP 440A
ST0106STEEL COMP 440B
ST0107STEEL COMP 440C
ST0446STEEL COMP 446
ST4615STEEL COMP 4615
ST4815STEEL COMP 4815
ST4820STEEL COMP 4820
ST5120STEEL COMP 5120
ST5140STEEL COMP 5140
ST5150STEEL COMP 5150
ST0125STEEL COMP 52100
ST6150STEEL COMP 6150
ST8615STEEL COMP 8615
ST8620STEEL COMP 8620
ST8630STEEL COMP 8630
ST8640STEEL COMP 8640
ST8645STEEL COMP 8645
ST8650STEEL COMP 8650
ST8720STEEL COMP 8720
ST8740STEEL COMP 8740
ST9260STEEL COMP 9260
ST0014STEEL COMP B1111
ST0015STEEL COMP B1112
ST0016STEEL COMP B1113
ST0046STEEL COMP MT1010
ST0047STEEL COMP MT1015
ST0048STEEL COMP MT1020
ST0049STEEL COMP MTX1015
ST0050STEEL COMP MTX1020
STB000STEEL CORROSION RESISTING
WDC000WOOD
WDD000WOOD MAPLE
ZNB000ZINC
ZNA000ZINC ALLOY
IF STYLE/REPLY CODE(s) B1 OR B2 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAR and CSPC and ABKW)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLB1)
Table 1
Physical Drawing IDReply Code (STYL)Reply
AAP1049B1THREADED
AAP1050B2SNAP
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAC2.0*;ABKWJAC2.0$$JAC2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ADAR*JBODY OUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADARJAC2.0*;ADARJAC2.0$$JAC2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CSPC*JACCOMMODATION HOLE INSIDE DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CSPCJAB2.0*;CSPCJAB2.0$$JAB2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
Table 1
ISAC Field Indicator (5000)Location
3AATBODY
3AEEOVERALL
3BDDINSULATOR
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AP33)Reply
QAEROSPACE MATERIAL SPEC STD
JAMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
GASSN STD
ACOMMERCIAL ITEM DESCRIPTION
KDEF STAN/SPEC
BFED SPEC
CFED STD
LGOVERNMENT STD/SPEC
NINTERNATIONAL STD/SPEC
FMFR REF
DMIL SPEC
EMIL STD
HNATIONAL SPEC
PNATIONAL STD
MNATIONAL STD/SPEC
Table 3
Reply Code (AP18)Reply
M10TH MATERIAL RESPONSE
N11TH MATERIAL RESPONSE
P12TH MATERIAL RESPONSE
Q13TH MATERIAL RESPONSE
R14TH MATERIAL RESPONSE
S15TH MATERIAL RESPONSE
T16TH MATERIAL RESPONSE
U17TH MATERIAL RESPONSE
W18TH MATERIAL RESPONSE
X19TH MATERIAL RESPONSE
B1ST MATERIAL RESPONSE
Y20TH MATERIAL RESPONSE
Z21ST MATERIAL RESPONSE
V22ND MATERIAL RESPONSE
C2ND MATERIAL RESPONSE
D3RD MATERIAL RESPONSE
E4TH MATERIAL RESPONSE
F5TH MATERIAL RESPONSE
H6TH MATERIAL RESPONSE
J7TH MATERIAL RESPONSE
K8TH MATERIAL RESPONSE
L9TH MATERIAL RESPONSE
GALL MATERIAL RESPONSES
ASINGLE MATERIAL RESPONSE
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3AEEDENB000*;SFTT3AEEDENB000$DPHA000*;SFTT3AEEDENB000$$DPHA000*)
Table 1
ISAC Field Indicator (5000)Location
3AATBODY
3AEEOVERALL
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (SF01)Reply
ANA000ANODIZE
CDA000CADMIUM
CMA000CHROMATE
CMB000CHROMATE ZINC
CRA000CHROMIUM
CPA000COMPOUND GLAZE
CUA000COPPER
CUB000COPPER ALLOY
DCA000DICHROMATE
ENA000ENAMEL
ENB000ENAMEL LUSTERLESS
AUA000GOLD
LQA000LACQUER
PBA000LEAD
NLA000NICKEL
XXB000OXIDE
XXA000OXIDE FILM
PNA000PAINT
PSA000PASSIVATE
PHA000PHOSPHATE
PCA000PLASTIC
PCH000PLASTIC VINYL
RHA000RHODIUM
RCE000RUBBER CHLOROPRENE
RCC000RUBBER NATURAL
RCD000RUBBER SILICONE
RCB000RUBBER SYNTHETIC
MSA000SHELLAC
AGA000SILVER
SNA000TIN
VAA000VARNISH
ZNA000ZINC
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
Table 1
ISAC Field Indicator (5000)Location
3AATBODY
3AEEOVERALL
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AP33)Reply
GASSN STD
ACOMMERCIAL ITEM DESCRIPTION
KDEF STAN/SPEC
BFED SPEC
CFED STD
LGOVERNMENT STD/SPEC
NINTERNATIONAL STD/SPEC
FMFR REF
DMIL SPEC
EMIL STD
HNATIONAL SPEC
PNATIONAL STD
MNATIONAL STD/SPEC
Table 3
Reply Code (AP39)Reply
M10TH TREATMENT RESPONSE
N11TH TREATMENT RESPONSE
P12TH TREATMENT RESPONSE
Q13TH TREATMENT RESPONSE
R14TH TREATMENT RESPONSE
S15TH TREATMENT RESPONSE
B1ST TREATMENT RESPONSE
C2ND TREATMENT RESPONSE
D3RD TREATMENT RESPONSE
E4TH TREATMENT RESPONSE
F5TH TREATMENT RESPONSE
H6TH TREATMENT RESPONSE
J7TH TREATMENT RESPONSE
K8TH TREATMENT RESPONSE
L9TH TREATMENT RESPONSE
GALL TREATMENT RESPONSES
ASINGLE TREATMENT RESPONSE
ABFE*DHAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION
THE SPECIFIC COMMERCIAL RATING WHICH CLASSES THE ITEM AS TO WHAT DEGREE THE ITEM WILL WITHSTAND ENVIRONMENTAL ELEMENTS AND/OR HAZARDOUS LOCATIONS.
Enter the applicable reply code from the table below
(ABFEDAC*;ABFEDCH$$DAV*)
Table 1
Reply Code (AB27)Reply
FFABRASION RESISTANT
DLACCELERATED WEATHERING RESISTANT
AAACID RESISTANT
DMAROMATIC HYDROCARBONS RESISTANT
ABCEMENT TIGHT
DJCORROSION RESISTANT
CGDRIPPROOF
ACDRIPTIGHT-NEMA TYPE 2
CFDUSTPROOF
ADDUSTPROOF-NEMA TYPE 13
DYDUSTTIGHT
AEDUSTTIGHT-NEMA TYPE 5
CEEXPLOSION PROOF
AFEXPLOSION PROOF NEC CL.I, GP.ABCD;CL.II, GP.EFG;CL.III
AHEXPLOSION PROOF NEC CL.I, GP.BC;CL.II, GP.EFG;CL.III
AGEXPLOSION PROOF NEC CL.I, GP.BCD;CL.II, GP.EFG;CL.III
AJEXPLOSION PROOF NEC CL.I, GP.CD;CL.II, GP.EFG;CL.III
ALEXPLOSION PROOF NEC CL.I, GP.D;CL.II, GP.EFG
AKEXPLOSION PROOF NEC CL.I, GP.D;CL.II, GP.EFG;CL.III
AMEXPLOSION PROOF NEC CL.I, GP.D;CL.II, GP.G
ANEXPLOSION PROOF NEC CL.II, GP.EFG;CL.III
DNFLAME RESISTANT
DPFUEL RESISTANT
CHFUNGUS RESISTANT
ATGASTIGHT
GNGENERAL PURPOSE
APGENERAL PURPOSE-NEMA TYPE 1
DQGREASE RESISTANT
DRHEAT RESISTANT
DSHYDROSTATIC RESISTANT
DVMOISTURE PROOF
DWOIL RESISTANT
CJOILTIGHT
AQOILTIGHT-NEMA TYPE 11
CDOZONE RESISTANT
EMRAINTIGHT
ARRAINTIGHT-NEMA TYPE 3R
GCSALT SPRAY PROOF
FZSALT SPRAY RESISTANT
DTSALT WATER RESISTANT
FNSAND-DUST, MIL-B-5423
ASSUBMERSIBLE-NEMA TYPE 6
GVSUNLIGHT RESISTANT
CMWATERPROOF
CNWATERTIGHT
FPWATERTIGHT, MIL-B-5423
AUWATERTIGHT-NEMA TYPE 4
EGWEATHER RESISTANT
AVWEATHERPROOF-NEMA TYPE 3
CQTS*BCONDUIT TRADE SIZE ACCOMMODATED
INDICATES THE INDUSTRIAL SIZE DESIGNATION OF THE CONDUIT WHICH THE ITEM WILL ACCOMMODATE.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CQTSB2.0*;CQTSB2.0$$BM2.0*)
CSFT*DBASE THREAD LOCATION
INDICATES THE LOCATION OF THE THREAD ON THE BASE.
Enter the applicable reply code from the table below
(CSFTDNTE*;CSFTDEXT$$DNTE*)
Table 1
Reply Code (AN73)Reply
EXTEXTERNAL
NTEINTERNAL
IF STYLE/REPLY CODE(s) SM OR SS WERE ENTERED FOR MRC BZRR, YOU MUST ANSWER MRC (CQQR and CTTC) or (CQQR and AAJE)
IF STYLE/REPLY CODE(s) JC, JF, NC, NE, NF OR UN WERE ENTERED FOR MRC BZRR, YOU MUST ANSWER MRC (AAJD and CMLP)
IF STYLE/REPLY CODE(s) NS WERE ENTERED FOR MRC BZRR, YOU MUST ANSWER MRC (AAJD and CMLP) or (AAJE and CMLP)
IF STYLE/REPLY CODE(s) NP, NT, PM OR TS WERE ENTERED FOR MRC BZRR, YOU MUST ANSWER MRC (CMLP)
BZRR*DTHREAD SERIES
A DESIGNATION INDICATING THE DIAMETER-PITCH COMBINATION AND THE NUMBER OF THREADS PER MEASUREMENT SCALE APPLIED TO A SERIES OF DIAMETERS.
Enter the applicable reply code from the table below
(BZRRDNT*;BZRRDSS$$DJF*)
Table 1
Reply Code (AH06)Reply
SMISO M
SSISO S
PMNPSM
NPNPT
NTNPTF
TSNPTS
UNUN
NCUNC
NEUNEF
NFUNF
JFUNIFIED NATIONAL JOINT FINE (UNJF)
JCUNJC
NSUNS
WWWHITWORTH
CQJX*JNOMINAL THREAD SIZE
A DESIGNATION THAT IS USED FOR THE PURPOSE OF GENERAL IDENTIFICATION OF THE THREAD.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQJXJA2.0*;CQJXJA2.0$$JA2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
CMLP*ATHREAD QUANTITY PER INCH
THE NUMBER OF THREADS ON THE ITEM PER LINEAR INCH MEASURED ON A LINE PARALLEL TO THE THREAD AXIS.
Enter the alpha-numeric reply with a minimum of one character.
(CMLPAH8)
CQQR*BTHREAD PITCH IN MILLIMETERS
A MEASUREMENT OF DISTANCE BETWEEN CORRESPONDING POINTS ON TWO ADJACENT THREADS MEASURED PARALLEL TO THE THREAD AXIS,EXPRESSED IN MILLIMETERS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CQQRB2.0)
AAJD*ATHREAD CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.
Enter the alpha-numeric reply with a minimum of one character.
(AAJDAF4)
CTTC*JTHREAD TOLERANCE CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING ESTABLISHED PITCH AND CREST DIAMETER TOLERANCE POSITION AND GRADE.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(CTTCJEXTTEXT1234*)
Table 1
Reply Code (AN73)Reply
EXTEXTERNAL
NTEINTERNAL
AAJE*JTHREAD PITCH DIAMETERS
THE MINIMUM AND MAXIMUM PITCH DIAMETER LIMITS OF A STRAIGHT SCREW THREAD.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AAJEJAM32.0/P50.0*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
AAJF*DTHREAD DIRECTION
THE DIRECTION OF THE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable reply code from the table below
(AAJFDAAG)
Table 1
Reply Code (AA38)Reply
AAGLEFT-HAND
AALRIGHT-HAND
AASA*JTHREAD LENGTH
A MEASUREMENT OF THE EXTENT OF THREADS,INCLUDING INCOMPLETE THREADS,ALONG A LINE PARALLEL TO THE LONGITUDINAL AXIS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AASAJAC2.0*;AASAJAC2.0$$JAC2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDBAY*;CBBLDBAX$$DFNY*)
Table 1
Reply Code (AN47)Reply
BAXCOMPONENT SWITCH
FNYROHS DIRECTIVE COMPLIANCE
BAYSPRING LOADED
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
Table 1
Reply Code (AC28)Reply
ASPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
BSTANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
CDRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
Table 1
Reply Code (AD05)Reply
CYHARDENED
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
Table 1
Reply Code (AN58)Reply
AADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCN2.0*)
Table 1
Reply Code (AN76)Reply
CCCUBIC CENTIMETERS
CNCUBIC INCHES
CTJS*JUNPACKAGED UNIT WEIGHT
THE MEASURED WEIGHT OF AN ITEM UNENCUMERED BY PACKAGING OR PACKING MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTJSJGMA2.0*)
Table 1
Reply Code (AN75)Reply
GMGRAMS
KGKILOGRAMS
OZOUNCES
LBPOUNDS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDPTA000*;PRMTDRHA000$DIRA000*;PRMTDRHA000$$DIRA000*)
Table 1
Reply Code (MA01)Reply
AUA000GOLD
IRA000IRIDIUM
AZA000OSMIUM
PDA000PALLADIUM
PTA000PLATINUM
RHA000RHODIUM
RTA000RUTHENIUM
AGA000SILVER
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJRHA000E2.0*;PMWTJRHA000E2.0$$JRHA000E2.1*)
Table 1
Reply Code (MA01)Reply
AUA000GOLD
IRA000IRIDIUM
AZA000OSMIUM
PDA000PALLADIUM
PTA000PLATINUM
RHA000RHODIUM
RTA000RUTHENIUM
AGA000SILVER
Table 2
Reply Code (AG14)Reply
EGRAINS, TROY
RGRAMS
FOUNCES, TROY
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJAUA0002.0*;PMLCJAUA0002.0$JAUA0002.0*;PMLCJAUA0002.0$$JAUA0002.1*)
Table 1
Reply Code (MA01)Reply
AUA000GOLD
IRA000IRIDIUM
AZA000OSMIUM
PDA000PALLADIUM
PTA000PLATINUM
RHA000RHODIUM
RTA000RUTHENIUM
AGA000SILVER
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
Table 1
Reply Code (AN62)Reply
VFEDERAL MOTOR VEHICLE SAFETY STANDARD
FFLAMMABILITY STANDARD
SGOVERNMENT SPECIFICATION
TGOVERNMENT STANDARD
UINTERNATIONAL STD/SPEC
DMANUFACTURERS SOURCE CONTROL
RMANUFACTURERS SPECIFICATION
NMANUFACTURERS SPECIFICATION CONTROL
MMANUFACTURERS STANDARD
BNATIONAL STD/SPEC
APROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
PPROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
Table 1
Reply Code (AD08)Reply
ALALLOY
BEANNEALED
ANANNEX
APAPPENDIX
ACAPPLICABILITY CLASS
ARARRANGEMENT
ASASSEMBLY
ABASSORTMENT
BFBOND
BXBOX
CYCAPACITY
CACASE
CTCATEGORY
CFCIRCUMFERENCE
CLCLASS
CECODE
CRCOLOR
CCCOMBINATION CODE
CNCOMPONENT
CPCOMPOSITION
CMCOMPOUND
CDCONDITION
AVCONFIGURATION
CSCONSTRUCTION
BGCORE CONDITION
CBCUT OFF
AMDELAY CLASS
DEDESIGN
DGDESIGNATOR
DWDRAWING NUMBER
DUDUPLEX
EGEDGE
ENEND
FYFAMILY
FGFIGURE
AKFILE NUMBER
FNFINISH
FBFLAVOR
BHFLUX PERCENTAGE
FMFORM
FAFORMULA
AJGAGE STOCK NUMBER
GRGRADE
GAGRADUATION
AXGRANULES
AYGRIT
GBGROUND
GPGROUP
HAHEAVY DUTY
BAIMAGE COLOR
NSINSERT
TMITEM
KDKIND
KTKIT
LGLENGTH
LVLEVEL
LTLIMIT
MKMARK
AAMARKER
ADMASK APERTURE
MLMATERIAL
BBMAXIMUM DENSITY
TAMEDIUM TEMPER
MHMESH
MEMETHOD
BCMINIMUM DENSITY
MDMODEL
MTMOUNTING
AQNATURAL
AUNON-DELAY CLASS
NRNUMBER
BLOUTFIT NUMBER
PAPARAGRAPH
PTPART
PNPATTERN
PCPHYSICAL CONDITION
PSPIECE
PLPLAN
PRPOINT
PDPOLISHED
PBPRESSURE RATING
QAQUALITY
QBQUENCHED
RNRANGE
AERAPID
RTRATING
RFREFERENCE NUMBER
RAREGULAR DUTY
BJRMA FLUX
SJSALIENT CHARACTERISTICS
SCSCHEDULE
SBSECTION
SLSELECTION
BDSERIALIZED
SESERIES
SVSERVICE
SXSET
SASHADE
SHSHAPE
SGSHEET
SZSIZE
AGSLOW
TCSOFT TEMPER
SKSOURCE
PZSPECIES
SQSPECIFICATION SHEET
SDSPEED
AWSTANDARD
SRSTRAIGHT
STSTYLE
SSSUBCLASS
SFSUBFORM
SPSUBTYPE
BKSUPPORT
SNSURFACE CONDITION
SYSYMBOL
SMSYSTEM
TBTABLE
TNTANNAGE
TPTEMPER
TXTEXTURE
TKTHICKNESS
TTTREATMENT
TRTRIM
TYTYPE
YNUNIT
AZUNSERIALIZED
VAVARIETY
WTWEIGHT
WDWIDTH
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)