A shaped piece of metal having a plane or curved surface, either sunk or projecting, used for ornamental or other application.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED04153*)
AGXWDPHYSICAL FORM
THE RECOGNIZED SHAPE, CONFIGURATION, STRUCTURE, OR MOLD OF A SUBSTANCE, NATURAL OR REFINED, THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Enter the applicable reply code from the table below
(AGXWDADF*;AGXWDAAEC$DAAEC*)
| Table 1 |
| Reply Code (AE98) | Reply |
| AAEC | BULK |
| ADF | SPECIFIC LENGTH |
AXGYDMOUNTING METHOD
THE MEANS OF ATTACHING THE ITEM.
Enter the applicable reply code from the table below
(AXGYDA*;AXGYDAEQ$DANF*)
| Table 1 |
| Reply Code (AM39) | Reply |
| BDH | ADHESIVE |
| A | ANY ACCEPTABLE |
| ACP | HOLE |
| BDE | MACHINE BOLT |
| BCW | MACHINE SCREW |
| BBY | MOUNTING HOLES |
| BDF | NAIL |
| AAG | RIVET |
| ABW | SCREW |
| AEQ | SHEET METAL SCREW |
| ANC | SNAP-ON |
| ANF | SPRING CLIP |
| BDG | SPRING TENSION FASTENER |
| BDC | WOOD SCREW |
AARNDFABRICATION METHOD
THE PROCESS USED IN MANUFACTURING THE ITEM.
Enter the applicable reply code from the table below
(AARNDKS*;AARNDGR$DAS*)
| Table 1 |
| Reply Code (AA62) | Reply |
| KS | DIE CAST |
| GR | EXTRUDED |
| AS | ROLLED |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDCUB000*;MATTDST1008$DZSJ001*;MATTDST1008$$DZSJ001*)
| Table 1 |
| Reply Code (MA01) | Reply |
| ZRM000 | AL5052, H32 |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| ZSN000 | ALUMINUM ALLOY 2024, T-42 |
| AL6061 | ALUMINUM ALLOY 6061 |
| ZSJ001 | ALUMINUM ALLOY 6061, TYPE 6 |
| AL6063 | ALUMINUM ALLOY 6063 |
| ZSM000 | ALUMINUM ALLOY 6063, T-52 |
| AAA000 | CALCIUM ALGINATE |
| CUB000 | COPPER ALLOY |
| STA000 | STEEL |
| ST1008 | STEEL COMP 1008 |
| STB000 | STEEL CORROSION RESISTING |
| ZRF000 | STEEL,ARMOR |
| STF000 | STEEL,CARBON |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
CZNF*ACOLOR CHIP NUMBER
THE IDENTIFYING NUMBER FOR THE COLOR CHIP.
Enter the alpha-numeric reply with a minimum of one character.
(CZNFAM0)
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDTA0099*;HUESDBU0000$DBE0000*;HUESDBU0000$$DBE0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| BE0000 | BEIGE |
| BL0000 | BLACK |
| BU0000 | BLUE |
| GY0019 | GRAY, SILVER |
| GR0000 | GREEN |
| GR0492 | GREEN 383, 34094 |
| GR0494 | GREEN, 383 |
| GR0024 | GREEN, FOREST |
| RG0002 | ORANGE-YELLOW |
| TA0000 | TAN |
| TA0099 | TAN, 686A |
| WH0000 | WHITE |
IF YOU ANSWER MRC HDCL, YOU MUST ANSWER MRC (HUES)
HDCL*JCOLOR DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,MANUFACTURERS REFERENCE,OR INDEX SYSTEM AND THE CLASIFICATION DESIGNATION, USED TO IDENTIFY COLOR, COLOR SELECTION, COLOR MATCHING AND QUALITY CONTROL OF A SPECIFIC COLOR.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(HDCLJEATEXT1234*;HDCLJEATEXT1234$$JEATEXT1234*;HDCLJEATEXT1234$JEATEXT1234*;HDCL1BJEATEXT1234*;HDCL1BJEATEXT1234$$JEATEXT1234*;HDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP93) | Reply |
| M | 10TH COLOR RESPONSE |
| N | 11TH COLOR RESPONSE |
| P | 12TH COLOR RESPONSE |
| Q | 13TH COLOR RESPONSE |
| R | 14TH COLOR RESPONSE |
| S | 15TH COLOR RESPONSE |
| T | 16TH COLOR RESPONSE |
| U | 17TH COLOR RESPONSE |
| W | 18TH COLOR RESPONSE |
| X | 19TH COLOR RESPONSE |
| B | 1ST COLOR RESPONSE |
| Y | 20TH COLOR RESPONSE |
| Z | 21ST COLOR RESPONSE |
| V | 22ND COLOR RESPONSE |
| C | 2ND COLOR RESPONSE |
| D | 3RD COLOR RESPONSE |
| E | 4TH COLOR RESPONSE |
| F | 5TH COLOR RESPONSE |
| H | 6TH COLOR RESPONSE |
| J | 7TH COLOR RESPONSE |
| K | 8TH COLOR RESPONSE |
| L | 9TH COLOR RESPONSE |
| G | ALL COLOR RESPONSE |
| A | SINGLE COLOR RESPONSE |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(SFTTDPND000*;SFTTDENA000$DCRA000*;SFTTDENA000$$DCRA000*)
| Table 1 |
| Reply Code (SF01) | Reply |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| AAA001 | CARC (CHEMICAL AGENT RESISTANT COATING) |
| CMA000 | CHROMATE |
| CMB000 | CHROMATE ZINC |
| CRA000 | CHROMIUM |
| ENA000 | ENAMEL |
| PND000 | PAINT EPOXY |
| AAA000 | PAINTED |
| ZNA000 | ZINC |
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
ALBY*DUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter the applicable reply code from the table below
(ALBYDAMF)
| Table 1 |
| Reply Code (AH21) | Reply |
| AHX | AIRCRAFT |
| BPX | COMBAT VEHICLE |
| BGH | FULL-TRACKED VEHICLE |
| AHY | SHIP |
| AMF | VEHICULAR |
BBJX*DMOUNTING POSITION
THE INSTALLED POSITION FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(BBJXDAAC)
| Table 1 |
| Reply Code (AM84) | Reply |
| ABG | FRONT |
| ACH | LEFT FRONT |
| AFJ | LEFT REAR |
| AAB | LEFT SIDE |
| ABK | REAR |
| ACK | RIGHT FRONT |
| AFK | RIGHT REAR |
| AAC | RIGHT SIDE |
| ACM | SIDE PANEL |
| ACN | TOP |
SHPE*DSHAPE
THE PHYSICAL CONFIGURATION OF THE ITEM.
Enter the applicable reply code from the table below
(SHPEDAJG)
| Table 1 |
| Reply Code (AD07) | Reply |
| AAH | ANGULAR-SPLIT |
| AAK | ARC |
| ABS | CIRCULAR |
| ACS | CROSS PEEN |
| ADX | DOUBLE BEVELED CHISEL |
| AEZ | FLANGED |
| AFS | FLAT W/BEVELED SLOT |
| AHS | HORIZONTAL OVAL |
| AHT | HORIZONTAL RECTANGULAR |
| AJG | IRREGULAR |
| AKR | OBLONG |
| AND | RECTANGULAR |
| APL | ROUND |
| ASL | SQUARE |
| BNE | U-SHAPED |
AEGG*ANEXT HIGHER ASSEMBLY IDENTIFICATION DESIGNATOR
THE NAME OR COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH IDENTIFY THE SPECIFIC NEXT HIGHER ASSEMBLY.
Enter the alpha-numeric reply with a minimum of one character.
(AEGGAY7)
CYJD*AEND ITEM IDENTIFICATION DESIGNATOR
THE NAME OR COMBINED GROUP OF LETTERS,AND/OR SYMBOLS WHICH IDENTIFY THE SPECIFIC END ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(CYJDAK2)
ABTJ*AMOUNTING HOLE QUANTITY
THE NUMBER OF MOUNTING HOLES PROVIDED.
Enter the numeric reply with a minimum of one digit.
(ABTJA10*)
IF STYLE/REPLY CODE(s) 1, 2, 3, 5, 7, 29, 30, 31, 32, 33, 34, 35 OR 37 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AHDD and ADTP and AJUZ)
IF STYLE/REPLY CODE(s) 9 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AHDD and ADTP and ABGF and AJUZ and AJVU)
IF STYLE/REPLY CODE(s) 10, 11, 12, 15, 16 OR 109 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADTP and AJUZ and AJVU)
IF STYLE/REPLY CODE(s) 17 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADTP and ABGF and AJUZ and AJVU)
IF STYLE/REPLY CODE(s) 19, 20, 21 OR 22 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADTP and ABGF and AJUZ and ABGA)
IF STYLE/REPLY CODE(s) 23, 24, 40, 41, 42, 78, 79, 80, 81, 82, 91 OR 92 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJUZ and ADTP)
IF STYLE/REPLY CODE(s) 25, 26, 27, 28, 36, 69 OR 117 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGSM and ADTP and AJUZ)
IF STYLE/REPLY CODE(s) 38 OR 39 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJVU)
IF STYLE/REPLY CODE(s) 43, 45, 46, 47, 48, 49 OR 76 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJUZ and ADTP and ABGF)
IF STYLE/REPLY CODE(s) 44 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJUZ and ABGF)
IF STYLE/REPLY CODE(s) 51 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJUZ and ABGF and AGSM)
IF STYLE/REPLY CODE(s) 52 OR 66 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJUZ and ADTP and AGSM)
IF STYLE/REPLY CODE(s) 53 OR 54 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJUZ and ABGF and ABMK)
IF STYLE/REPLY CODE(s) 55 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJUZ and ABMK)
IF STYLE/REPLY CODE(s) 59 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJVU and ABMK and ABGA and AGSM)
IF STYLE/REPLY CODE(s) 60 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGSM and ABMK and AJVU)
IF STYLE/REPLY CODE(s) 61, 63, 64, 67, 68, 83, 85, 87, 111, 112, 113, 114 OR 116 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJVU and ADTP and AGSM)
IF STYLE/REPLY CODE(s) 70 OR 72 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BKRN and ADTP and AGSM and AHDD)
IF STYLE/REPLY CODE(s) 74 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABGF and ABMK)
IF STYLE/REPLY CODE(s) 75 OR 77 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJUZ and ABGF and BKRN)
IF STYLE/REPLY CODE(s) 86 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABGA and ADTP and AJVU and AGSM)
IF STYLE/REPLY CODE(s) 88 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJVU and ADTP and AGSM)
IF STYLE/REPLY CODE(s) 89 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADTP and AGSM)
IF STYLE/REPLY CODE(s) 90 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABMK and ABFY)
IF STYLE/REPLY CODE(s) 83, 94, 95 OR 96 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJVU and AJUZ and AGSM)
IF STYLE/REPLY CODE(s) 97 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJVU and AJUZ)
IF STYLE/REPLY CODE(s) 98 OR 99 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGSM and AJVU and AJUZ)
IF STYLE/REPLY CODE(s) 100 OR 101 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGSM and ADTP and BKRN)
IF STYLE/REPLY CODE(s) 102 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGSM and BKRN and ABKW)
IF STYLE/REPLY CODE(s) 106 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJVU and AJUZ and ADTP and AGSM)
IF STYLE/REPLY CODE(s) 107 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADTP and AJUZ and AGSM)
IF STYLE/REPLY CODE(s) 115 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGSM and ADTP and AJUZ and AJVU)
IF STYLE/REPLY CODE(s) 118 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADTP)
IF STYLE/REPLY CODE(s) 120 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADTP and AJVU)
IF STYLE/REPLY CODE(s) 122 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADTP)
IF STYLE/REPLY CODE(s) 123 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGSM and ADTP)
IF STYLE/REPLY CODE(s) 124, 140, 141, 142, 143, 144, 145, 146, 152, 154, 160, 161, 163, 174, 189, 190, 191, 194, 199, 200, 201 OR 202 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and ABFY)
IF STYLE/REPLY CODE(s) 125, 128, 129, 208 OR 210 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and AGSM)
IF STYLE/REPLY CODE(s) 126, 130, 131, 132, 133 OR 134 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADUM and ABKW)
IF STYLE/REPLY CODE(s) 127 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGSM and ADTP and ABKW)
IF STYLE/REPLY CODE(s) 135 OR 136 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADUM and ABKW and BKRN)
IF STYLE/REPLY CODE(s) 137, 138 OR 139 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABMK and ABGG)
IF STYLE/REPLY CODE(s) 147, 153, 175 OR 177 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and ABFY)
IF STYLE/REPLY CODE(s) 148, 149, 150, 151 OR 211 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and AGSM and AJVU)
IF STYLE/REPLY CODE(s) 155, 183, 184, 185 OR 186 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABFY and ABKW and ABGF)
IF STYLE/REPLY CODE(s) 159 OR 209 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and ABFY and AGSM)
IF STYLE/REPLY CODE(s) 158 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJVU and ABKW and AJUZ and ABFY)
IF STYLE/REPLY CODE(s) 164 OR 173 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABFY and BKRN and ABKW)
IF STYLE/REPLY CODE(s) 166 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABFY and BKRN and ABKW and ADTP)
IF STYLE/REPLY CODE(s) 168 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABMK and BKRN and ABKW)
IF STYLE/REPLY CODE(s) 170 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BKRN and AJVU and ADTP and AJUZ and ABFY)
IF STYLE/REPLY CODE(s) 171 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and ABFY and AJVU)
IF STYLE/REPLY CODE(s) 172 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BKRN and ABKW and ADTP)
IF STYLE/REPLY CODE(s) 178 OR 179 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABFY and ABKW and BKRN and ADTP)
IF STYLE/REPLY CODE(s) 181 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABFY and ABKW and BKRN)
IF STYLE/REPLY CODE(s) 182 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJVU and AJUZ and ABKW and ADTP)
IF STYLE/REPLY CODE(s) 187 OR 188 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABFY and ABKW and ABGA and ABGF)
IF STYLE/REPLY CODE(s) 193 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and AHDD and ABFY)
IF STYLE/REPLY CODE(s) 195 OR 196 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and ADTP and ABFY)
IF STYLE/REPLY CODE(s) 197 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABFY and ABKW and AJUZ)
IF STYLE/REPLY CODE(s) 198 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJVU and ABKW and AJUZ)
IF STYLE/REPLY CODE(s) 203 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABFY and AGSM and ABKW and AJUZ and AJVU)
IF STYLE/REPLY CODE(s) 204 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABFY and ABKW and ABGF)
IF STYLE/REPLY CODE(s) 205 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJUZ and ABKW and ADTP and AGSM and ABFY)
IF STYLE/REPLY CODE(s) 206 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJVU and ABFY and ABKW)
IF STYLE/REPLY CODE(s) 207 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJVU and ABFY and AGSM and ABKW)
IF STYLE/REPLY CODE(s) 156, 157 OR 171 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABFY and ABKW and AJVU)
IF STYLE/REPLY CODE(s) 162 OR 192 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABFY and ADTP and ABKW)
IF STYLE/REPLY CODE(s) 56 OR 57 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJVU and ABMK and AGSM)
IF STYLE/REPLY CODE(s) 103 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGSM and ADTP and BKRN)
IF STYLE/REPLY CODE(s) 105 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJVU and ADTP and AGSM)
STYL*LSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLL198*;STYLL202$L24*)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| BW10031 | 1 | ROLL DOWN CORNER |
| BW10037 | 10 | ROLL DOWN CORNER, DRIP EDGE |
| BW10117 | 100 | CAP STRIP |
| BW10118 | 101 | CAP STRIP |
| BW10119 | 102 | CAP STRIP |
| BW10120 | 103 | CAP STRIP |
| BW10121 | 105 | CORNER BEND |
| BW10122 | 106 | CORNER BEND |
| BW10123 | 107 | TEE NOSING |
| BW10124 | 109 | TEE NOSING |
| BW10038 | 11 | ROLL DOWN CORNER |
| BW10125 | 111 | DIVISION BAR |
| BW10126 | 112 | DIVISION BAR |
| BW10127 | 113 | DIVISION BAR |
| BW10128 | 114 | DIVISION BAR |
| BW10129 | 115 | DIVISION BAR |
| BW10130 | 116 | DIVISION BAR |
| BW10131 | 117 | ANGLE BAR |
| BW10132 | 118 | ANGLE BAR |
| BW10039 | 12 | ROLL DOWN CORNER |
| BW10133 | 120 | CURVE BAR |
| BW10134 | 122 | STRAIGHT BAR |
| BW10135 | 123 | ANGLE BAR |
| BW10136 | 124 | ANGLE BAR |
| BW10137 | 125 | ANGLE BAR |
| BW10138 | 126 | CURVE BAR |
| BW10139 | 127 | CHANNEL STRIP |
| BW10140 | 128 | SLIP JOINT STRIP |
| BW10141 | 129 | ANGLE STRIP |
| BW10142 | 130 | BINDER |
| BW10143 | 131 | BEND NOSING |
| BW10144 | 132 | CHANNEL BEND NOSING |
| BW10145 | 133 | CHANNEL BEND NOSING SNAP-ON |
| BW10146 | 134 | CHANNEL BEND NOSING |
| BW10147 | 135 | BEND NOSING |
| BW10148 | 136 | BEND NOSING |
| BW10149 | 137 | QUARTER ROUND |
| BW10250 | 138 | FASCIA |
| BW10150 | 139 | LIGHT COVE |
| BW10151 | 140 | LIGHT COVE |
| BW10152 | 141 | LIGHT COVE |
| BW10153 | 142 | LIGHT COVE |
| BW10154 | 143 | LIGHT COVE |
| BW10155 | 144 | LIGHT COVE |
| BW10156 | 145 | FILLET |
| BW10157 | 146 | REVERSE FASCIA |
| BW10158 | 147 | REVERSE FASCIA |
| BW10159 | 148 | QUATER ROUND |
| BW10160 | 149 | BEND SIDE TRIM |
| BW10040 | 15 | ROLL DOWN CORNER, DRIP EDGE |
| BW10161 | 150 | PLAIN SIDE TRIM |
| BW10162 | 151 | PLAIN SIDE TRIM |
| BW10163 | 152 | SINGLE GROOVE TRIM, SNAP-ON |
| BW10164 | 153 | ANGLE TRIM, SNAP-ON |
| BW10165 | 154 | FILLET |
| BW10166 | 155 | SUNKEN FILLET |
| BW10167 | 156 | BEND TRIM |
| BW10170 | 157 | CHANNEL BEND TRIM, SNAP-ON |
| BW10169 | 158 | BEND TRIM |
| BW10168 | 159 | BEND TRIM |
| BW10041 | 16 | ROLL DOWN CORNER, DRIP EDGE |
| BW10171 | 160 | BEND TRIM |
| BW10172 | 161 | CHANNEL BEND TRIM, SNAP-ON |
| BW10173 | 162 | ROUND BEND TRIM |
| BW10174 | 163 | BEND TRIM, SLIP-JOINT |
| BW10175 | 164 | ROUND BEND TRIM |
| BW10176 | 166 | BEND TRIM |
| BW10177 | 167 | BEND TRIM |
| BW10178 | 168 | BEND TRIM |
| BW10042 | 17 | CAP EDGE |
| BW10179 | 170 | BEND TRIM |
| BW10180 | 171 | BEND TRIM |
| BW10181 | 172 | BEND TRIM |
| BW10182 | 173 | BEND TRIM |
| BW10183 | 174 | CAP TRIM |
| BW10184 | 175 | CHANNEL BEND NOSING |
| BW10185 | 177 | ANGLE TRIM |
| BW10187 | 178 | CHANNEL BEND, SLIP-JOINT |
| BW10186 | 179 | CHANNEL BEND, SLIP-JOINT |
| BW10251 | 181 | CHANNEL BEND |
| BW10188 | 182 | BEND SIDE TRIM |
| BW10189 | 183 | GUTTER |
| BW10190 | 184 | GUTTER |
| BW10191 | 185 | WIDE GUTTER |
| BW10192 | 186 | NARROW GUTTER |
| BW10193 | 187 | CHANNEL BAR |
| BW10194 | 188 | CHANNEL BAR |
| BW10195 | 189 | STRAIGHT CHANNEL |
| BW10043 | 19 | CAP EDGE |
| BW10196 | 190 | STRAIGHT CHANNEL |
| BW10197 | 191 | CURVE CHANNEL |
| BW10198 | 192 | STRAIGHT WAVE CHANNEL |
| BW10199 | 193 | CAVE CHANNEL |
| BW10200 | 194 | V-CROOVE CHANNEL |
| BW10201 | 195 | CROOVE CHANNEL |
| BW10202 | 196 | PANEL STRIP |
| BW10203 | 197 | PANEL STRIP |
| BW10204 | 198 | PANEL STRIP INSERT |
| BW10205 | 199 | PANEL STRIP INSERT |
| BW10032 | 2 | ROLL DOWN CORNER |
| BW10044 | 20 | CAP EDGE |
| BW10206 | 200 | SADDLE |
| BW10207 | 201 | SAIL TRACK |
| BW10208 | 202 | RIDGE BINDER |
| BW10209 | 203 | F-CHANNEL |
| BW10210 | 204 | CORNER ROUND CHANNEL |
| BW10211 | 205 | CORNER BUTT FLANGE |
| BW10212 | 206 | CHANNEL TRACK |
| BW10252 | 207 | CHANNEL BUTT |
| BW10213 | 208 | CHANNEL JUNCTION |
| BW10214 | 209 | CHANNEL TEE |
| BW10045 | 21 | CAP EDGE |
| BW10215 | 210 | CHANNEL CORNER STOP |
| BW10216 | 211 | CHANNEL DIVISION |
| BW10046 | 22 | CAP EDGE |
| BW10047 | 23 | CAP EDGE |
| BW10048 | 24 | CAP EDGE |
| BW10049 | 25 | CORNER |
| BW10050 | 26 | CORNER |
| BW10051 | 27 | CORNER |
| BW10052 | 28 | CORNER |
| BW10053 | 29 | CORNER |
| BW10033 | 3 | ROLL DOWN CORNER |
| BW10054 | 30 | ROLL CORNER |
| BW10055 | 31 | ROLL CORNER |
| BW10056 | 32 | ROLL CORNER |
| BW10057 | 33 | CORNER |
| BW10058 | 34 | CORNER |
| BW10059 | 35 | CORNER |
| BW10060 | 36 | CORNER |
| BW10061 | 37 | CORNER |
| BW10062 | 38 | FLAT |
| BW10063 | 39 | FLAT |
| BW10064 | 40 | FLAT NOSING |
| BW10065 | 41 | FLAT NOSING |
| BW10066 | 42 | FLAT NOSING |
| BW10067 | 43 | OPEN FACE NOSING |
| BW10068 | 44 | OPEN FACE NOSING |
| BW10069 | 45 | OPEN FACE NOSING |
| BW10071 | 46 | OPEN FACE NOSING |
| BW10070 | 47 | OPEN FACE NOSING |
| BW10072 | 48 | OPEN FACE NOSING |
| BW10074 | 49 | OPEN FACE NOSING |
| BW10034 | 5 | ROLL DOWN CORNER |
| BW10073 | 51 | OPEN FACE NOSING |
| BW10075 | 52 | OPEN FACE NOSING |
| BW10076 | 53 | OPEN FACE NOSING INSERT |
| BW10077 | 54 | OPEN FACE NOSING BLIND INSERT |
| BW10078 | 55 | OPEN FACE NOSING INSERT |
| BW10079 | 56 | INSIDE CORNER |
| BW10080 | 57 | INSIDE CORNER |
| BW10081 | 59 | INSIDE CORNER |
| BW10082 | 60 | INSIDE CORNER |
| BW10083 | 61 | COVE FLANGE |
| BW10084 | 63 | COVE FLANGE |
| BW10085 | 64 | COVE FLANGE |
| BW10086 | 66 | LIGHT COVE FLANGE |
| BW10087 | 67 | LIGHT COVE FLANGE |
| BW10088 | 68 | LIGHT COVE FLANGE |
| BW10089 | 69 | COVE FLANGE |
| BW10035 | 7 | ROLL DOWN CORNER |
| BW10090 | 70 | TUBE COVE FLANGE |
| BW10091 | 72 | TUBE COVE FLANGE |
| BW10092 | 74 | COVE |
| BW10093 | 75 | OPEN COVE |
| BW10094 | 76 | OPEN COVE |
| BW10095 | 77 | OPEN COVE |
| BW10096 | 78 | COVE |
| BW10097 | 79 | COVE |
| BW10098 | 80 | COVE |
| BW10099 | 81 | COVE |
| BW10100 | 82 | BINDER |
| BW10101 | 83 | OUTSIDE CORNER |
| BW10102 | 85 | OUTSIDE CORNER |
| BW10103 | 86 | OUTSIDE CORNER |
| BW10104 | 87 | INSIDE CORNER |
| BW10105 | 88 | OUTSIDE CORNER |
| BW10106 | 89 | OUTSIDE CORNER |
| BW10036 | 9 | ROLL DOWN CORNER, DRIP EDGE |
| BW10107 | 90 | OUTSIDE CORNER INSERT |
| BW10108 | 91 | OUTSIDE ANGLE |
| BW10109 | 92 | INSIDE ANGLE |
| BW10110 | 93 | ROLL CAP FLANGE |
| BW10111 | 94 | ROLL CAP FLANGE |
| BW10112 | 95 | ROLL CAP CURVE FLANGE |
| BW10113 | 96 | ROLL CAP FLANGE |
| BW10114 | 97 | ROLL CAP FLANGE |
| BW10115 | 98 | CAP STRIP |
| BW10116 | 99 | CAP STRIP |
ABFY*JOVERALL DEPTH
AN OVERALL MEASUREMENT BETWEEN SPECIFIED POINTS OF AN ITEM,IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABFYJAB2.0*;ABFYJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGF*JGROOVE WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF A GROOVE,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGFJAB2.0*;ABGFJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAB2.0*;ABKWJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGA*JGROOVE DEPTH
A MEASUREMENT BETWEEN SPECIFIED POINTS OF A GROOVE,IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGAJAC2.0*;ABGAJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGG*JRADIUS
THE DISTANCE FROM THE CENTERLINE TO THE AXIS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGGJAB2.0*;ABGGJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGSM*JMATERIAL ACCOMMODATED THICKNESS
THE THICKNESS OF THE MATERIAL TO BE ACCOMMODATED.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGSMJAB2.0*;AGSMJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAA2.0*;ABMKJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADTP*JATTACHMENT FEATURE WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ATTACHMENT FEATURE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADTPJAA2.0*;ADTPJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADUM*JOVERALL THICKNESS
AN OVERALL MEASUREMENT OF THE SMALLEST DIMENSION OF AN ITEM,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADUMJAA2.0*;ADUMJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AHDD*JRELIEF DEPTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHDDJAB2.0*;AHDDJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJVU*JEXPOSURE WIDTH
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE FRONT TO THE BACK OF THE SURFACE THAT WILL REMAIN EXPOSED AFTER THE INSTALLATION OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJVUJAC2.0*;AJVUJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJUZ*JATTACHMENT FEATURE HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE TOP TO THE BOTTOM OF THE ATTACHMENT SURFACE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJUZJAA2.0*;AJUZJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BKRN*JEXPOSED WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE EXPOSED PORTION,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BKRNJAA2.0*;BKRNJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABTB*JMOUNTING HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A MOUNTING HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABTBJLB2.0*;ABTBJLB2.0$$JLB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABRY*JLENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRYJFC2.0*;ABRYJFC2.0$$JFC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ARJD*DDESIGN FORM
THE PHYSICAL CONFIGURATION OF THE ITEM.
Enter the applicable reply code from the table below
(ARJDDAAD)
| Table 1 |
| Reply Code (AL52) | Reply |
| AAD | ROLL |
| ADE | STRIP |
BLSD*GMOUNTING HARDWARE AND QUANTITY
THE MOUNTING HARDWARE FURNISHED AND THE NUMBER OF EACH.
Enter clear text.
(BLSDGCLEARTEXT)
ACHY*DMOUNTING HOLE TYPE
INDICATES THE TYPE OF HOLES PROVIDED IN THE ITEM TO FACILITATE MOUNTING TO ANOTHER ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ACHY3AEEDL*;ACHY3AEEDL$DE*;ACHY3AEEDL$$DE*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BEK | ALL HOLES |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB68) | Reply |
| A | COUNTERBORED |
| B | COUNTERSUNK |
| Q | KEYHOLE |
| L | PIVOT PIN |
| C | PLAIN |
| T | ROUND, UNTHREADED |
| N | SERRATED |
| P | SLOTTED |
| M | STUD |
| R | TAPER HOLE |
| F | TAPER PIN PILOT |
| K | TAPERED |
| D | THREADED |
| G | THREADED-COUNTERBORED |
| H | THREADED-COUNTERSUNK |
| S | THREADED-EXTRUDED |
| U | THRU HOLE |
| E | UNTHREADED |
| J | UNTHREADED-COUNTERSUNK |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
THSD*DTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable reply code from the table below
(THSDDBE*;THSDDCA$$DCE*)
| Table 1 |
| Reply Code (AH06) | Reply |
| AM | ACME |
| AC | ACME C |
| AG | ACME G |
| MM | ACME-MODIFIED |
| MS | ACME-SPECIAL |
| AS | AMERICAN STANDARD |
| MP | AMPT |
| AN | ANPT |
| AU | ANSFH |
| PA | API |
| PB | API IF |
| RE | API REG |
| PC | API STANDARD |
| AP | APSC |
| GA | ARMOURED CONDUIT, DIN 40430 |
| AW | ASA |
| BM | ASA HOSE |
| AV | ASH |
| BA | BA |
| RZ | BRASS |
| CJ | BRITISH NONSTANDARD WHITFORM |
| DP | BRITISH STANDARD BUTTRESS |
| CY | BRITISH STANDARD CYCLE (BSC) |
| BF | BRITISH STANDARD FINE (BSF) |
| BW | BRITISH STANDARD WHITWORTH (BSW) |
| CQ | BS CON |
| ZP | BSP. L |
| DQ | BSP.C |
| FB | BSP.F |
| BE | BSP.F EXT |
| BT | BSP.F INT |
| PL | BSP.PL |
| BL | BSP.PL EXT |
| BN | BSP.PL INT |
| BP | BSP.TR |
| BS | BSP.TR EXT |
| BR | BSP.TR INT |
| TP | BSTP |
| TT | BUTTRESS |
| CS | CALIF STANDARD |
| CH | CHEMICAL HOSE |
| DW | COARSE |
| CT | CUTTING |
| DD | DARDALET |
| DE | DEVILBISS |
| DF | DEVILBISS STANDARD |
| DM | DISSYMMETRICAL PROFILE NF L05-420 |
| DS | DOUBLE STUB |
| DR | DRIVE |
| CL | EF |
| FN | FINE |
| FM | FORMING |
| FP | F-PTF |
| DX | FRENCH CONDUIT THREAD NF C68-190 |
| GE | G |
| CM | INTERNATIONAL METRIC FINE THREAD |
| AD | INTERNATIONAL SPECIAL |
| AR | INTERNATIONAL STANDARD |
| AE | IPS |
| CR | ISO FINE THREAD PITCH SERIES 1 |
| CW | ISO FINE THREAD PITCH SERIES 2 |
| CX | ISO FINE THREAD PITCH SERIES 3 |
| CZ | ISO FINE THREAD PITCH SERIES 4 |
| SY | ISO FORM |
| SM | ISO M |
| ME | ISO METRIC FINE |
| SS | ISO S |
| JL | JIC |
| LH | LOWENHERZ |
| EM | M |
| CN | METRIC |
| MN | METRIC NONSTD |
| MX | METRIC TAPERED EXTERNAL |
| MB | METRIC TAPERED EXTERNAL, DIN 158 |
| MJ | MJ |
| MF | MODIFIED ACME 2G |
| MA | MODIFIED AMERICAN NATIONAL STANDARD STRAIGHT PIPE |
| CA | N |
| NX | N 5 |
| AB | N ACME BOX |
| AX | N SPECIAL |
| BZ | N STD |
| EN | N-12 |
| YN | N-16 |
| ZN | N-2 |
| NA | N-3 ACME |
| NB | N-4 STANDARD |
| DN | NATIONAL GAS ASSOCIATION |
| BX | NC |
| CE | NC-2 |
| NY | NC-2X |
| NL | NCT |
| NQ | NEF |
| ET | NET |
| BY | NF |
| CB | NF-1 |
| CC | NF-2 |
| FS | NFS |
| NG | NGO |
| GS | NGS |
| GT | NGT |
| AF | NGTD |
| AH | NGTI |
| AJ | NGTP |
| NH | NH |
| NZ | NH-SPCL |
| NK | NONSTANDARD ROUND |
| BB | NONSTANDARD SPECIAL |
| PN | NP |
| PG | NPI |
| SP | NPS |
| SC | NPSC |
| SF | NPSF |
| SH | NPSH |
| PS | NPSI |
| SL | NPSL |
| PM | NPSM |
| AK | NPSN |
| NP | NPT |
| AL | NPTA |
| NT | NPTF |
| PR | NPT-MODIFIED |
| TR | NPTR |
| TS | NPTS |
| AQ | NS |
| SN | NS-2 |
| NW | NSPT |
| PK | PACIFIC COAST |
| LN | PL INT BS61 |
| PW | PT |
| PH | PTF |
| PT | PTF-SAE SHORT |
| PP | PTF-SPL |
| PE | PTF-SPL EXTRA SHORT |
| PF | PTF-SPL SHORT |
| RR | R |
| RH | RAN HOSE |
| RL | RL |
| LB | RL(BSPL) |
| RD | ROUND |
| RJ | ROUND, DIN 20400 |
| RG | ROUND, DIN 405 |
| RM | ROUND, DIN 70156 |
| RK | ROUND, DIN 7272 |
| RP | RPT |
| RS | RS |
| SW | SAE |
| LT | SAE-LT |
| SG | SGT |
| SJ | SI |
| DA | SI FINE THREAD PITCH SERIES 1 |
| DB | SI FINE THREAD PITCH SERIES 2 |
| DC | SI FINE THREAD PITCH SERIES 3 |
| DJ | SI FINE THREAD PITCH SERIES 4 |
| DK | SI FINE THREAD PITCH SERIES 5 |
| SX | SI FORM |
| SK | SI-M |
| AY | SPECIAL |
| AZ | SPECIAL ACME |
| CF | SPECIAL MODIFIED WHITWORTH |
| PQ | SPT |
| SQ | SQUARE |
| SD | STANDARD ACME DOUBLE LEAD |
| ST | STD STUB ACME |
| CP | STEWART WARNER SPECIAL |
| SR | STI |
| SA | STUB ACME |
| SZ | STUB ACME DOUBLE LEAD |
| SE | STUB ACME M1 |
| SB | STUB ACME M2 |
| MT | SUBMARINE THD |
| TD | TAPER DRIVE |
| EX | TR EXT BS61 |
| RN | TR INT BS61 |
| TZ | TRAPEZIUM |
| AT | TWPP |
| UN | UN |
| NR | UN FORM |
| FF | UN-12 |
| FG | UN-16 |
| ZA | UN-20 |
| ZB | UN-28 |
| ZC | UN-32 |
| FC | UN-4 |
| FD | UN-6 |
| FE | UN-8 |
| DG | UND |
| BK | UNDERWRITERS |
| CG | UNDERWRITERS STANDARD TIP |
| NE | UNEF |
| DH | UNEF-2A |
| YM | UNEF-MODIFIED |
| NF | UNF |
| MD | UNF-MODIFIED |
| BD | UNG |
| BQ | UNIFIED |
| NC | UNIFIED NATIONAL COARSE (UNC) |
| DL | UNIFIED NATIONAL COARSE (UNC) DOUBLE LEAD |
| NJ | UNIFIED NATIONAL JOINT (UNJ) |
| JF | UNIFIED NATIONAL JOINT FINE (UNJF) |
| JC | UNJC |
| JE | UNJEF |
| JS | UNJS |
| NM | UNM |
| ND | UN-MODIFIED |
| HR | UNR |
| RC | UNRC |
| RF | UNRF |
| RT | UNRS |
| NS | UNS |
| BJ | USF |
| WW | WHITWORTH |
| WF | WHITWORTH PIPE, DIN 259 |
| WG | WHITWORTH PIPE, DIN 2999 |
| WP | WHITWORTH PIPE, DIN 3858 |
| WT | WHITWORTH SELECTED THREAD |
| WH | WHITWORTH STRAIGHT EXTERNAL PIPE, DIN 259 |
| WS | WHITWORTH STRAIGHT INTERNAL PIPE, DIN 259 |
| WN | WHITWORTH STRAIGHT INTERNAL PIPE, DIN 2999 |
| WB | WHITWORTH STRAIGHT INTERNAL PIPE, DIN 3858 |
| WE | WHITWORTH TAPERED EXTERNAL PIPE, DIN 2999 |
| WA | WHITWORTH TAPERED EXTERNAL PIPE, DIN 3858 |
| WD | WOOD |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information