An outer garment extending from the waist and reaching part way to the knees, covering each leg separately. Designed for females past the age of physical maturity.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED02898*)
FMAT*DFIBER MATERIAL
THE ELEMENT,CHEMICAL COMPOUND,OR MECHANICAL MIXTURE PROPERTIES OF THE FIBER,OR THE GENERIC NAME BY WHICH THE MANUFACTURED FIBER IS KNOWN AND/OR IDENTIFIED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(FMAT3AUVDNVD*;FMAT3AUVDNVD$DSRN*;FMAT3AUVDNVD$$DSRN*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AUB | INNER LAYER |
| 3AUF | INTERMEDIATE LAYER |
| 3AUO | LINER |
| 3AUQ | LINING |
| 3AUV | OUTER LAYER |
| 3AVF | MAIN BODY |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA02) | Reply |
| ACT | ACETATE |
| ACC | ACRYLIC |
| ALG | ALGINATE |
| ALP | ALPACA |
| A | ANY ACCEPTABLE |
| AMD | ARAMID |
| ASB | ASBESTOS |
| AZN | AZLON |
| CLS | CELLULOSE |
| CTN | COTTON |
| FLX | FLAX |
| GLS | GLASS |
| JTT | JUTE |
| MTC | METALLIC |
| MAC | MODACRYLIC |
| MHR | MOHAIR |
| NAT | NATURAL |
| NVD | NOVOLOID |
| NLN | NYLON |
| NTL | NYTRIL |
| AFN | OLEFIN |
| PSR | POLYESTER |
| RAY | RAYON |
| SRN | SARAN |
| SLK | SILK |
| SPX | SPANDEX |
| STS | STEEL STAINLESS |
| SYN | SYNTHETIC |
| TAT | TRIACETATE |
| VAL | VINAL |
| VYN | VINYON |
| WLL | WOOL |
MATT*DMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AEEDPCA000*;MATT3AEEDPCA000$DRCB000*;MATT3AEEDPCA000$$DRCB000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| PPA000 | PAPER |
| PCA000 | PLASTIC |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| RCE000 | RUBBER |
| RCF000 | RUBBER BUNA N |
| RCG000 | RUBBER BUNA S |
| RCD000 | RUBBER CHLOROPRENE |
| RCA000 | RUBBER NATURAL |
| RCB000 | RUBBER SYNTHETIC |
| WLA000 | WOOL |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
AKKN*DCLOTH-FABRIC NAME
THE TERM(S) BY WHICH THE CLOTH IS KNOWN OR DESIGNATED,EXCLUDING SURFACE COATING.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AKKN3AVFDCG*;AKKN3AVFDCG$DAP*;AKKN3AVFDCG$$DAP*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AUO | LINER |
| 3AUV | OUTER LAYER |
| 3AVF | MAIN BODY |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AF82) | Reply |
| HZ | AIRPLANE |
| AB | ALBERT TWILL |
| A | ANY ACCEPTABLE |
| AC | AWNING |
| AD | BALLISTIC |
| AE | BALLOON |
| AF | BANNER |
| AG | BARATHEA |
| HN | BASKET WEAVE |
| AH | BATISTE |
| JE | BATTING |
| AJ | BEAVER |
| AK | BEDFORD CORD |
| AL | BENGALINE |
| AM | BILLIARD |
| AN | BIRDSEYE |
| AP | BRATTICE |
| AQ | BROADCLOTH |
| AR | BUCKRAM |
| AS | BUNTING |
| AT | BURLAP |
| AU | CAMBRIC |
| AV | CAMOUFLAGE |
| AW | CHALLIS |
| AX | CHAMBRAY |
| GV | CHARMEUSE |
| AY | CHEESECLOTH |
| AZ | CORDED |
| BA | CORDUROY |
| BB | COVERT |
| BC | CRASH |
| BD | CREPE |
| BE | CURTAIN |
| BF | DAMASK |
| BG | DENIM |
| BH | DOBBY |
| BJ | DRILL |
| BK | DUCK |
| BL | ELASTIQUE |
| BM | FELT |
| BN | FLANNEL |
| BP | FLEECE |
| BQ | FRIEZE |
| BR | GABARDINE |
| BS | GINGHAM |
| BT | HERRINGBONE TWILL |
| BU | HOLLAND |
| BV | HUCK |
| BW | INTERLINING |
| BX | JEAN |
| HK | JERSEY |
| BY | JUNGLE |
| BZ | KERSEY |
| CA | KNITTED |
| CB | LAWN |
| CC | LENO |
| CD | LONGCLOTH |
| CE | MADRAS |
| CF | MARQUISETTE |
| CG | MELTON |
| CH | MOCK LENO |
| CJ | MOLESKIN |
| CK | MONKS CLOTH |
| CL | MUSLIN |
| CM | NAINSOOK |
| CN | NETTING |
| HQ | NOMEX |
| CP | NONWOVEN |
| EZ | NYLON |
| CQ | ORGANDY |
| CR | ORGANZA |
| CS | OSNABURG |
| CT | OXFORD |
| CU | PAJAMA CHECK |
| CV | PARACHUTE |
| CW | PERCALE |
| CX | PILE |
| CY | PIQUE |
| CZ | PLAIN WEAVE |
| DA | PLISSE |
| DB | POPLIN |
| DC | PRESSING |
| DE | PRINT |
| DF | SATEEN |
| DG | SATIN |
| DH | SEERSUCKER |
| DJ | SERGE |
| DK | SHEETING |
| DL | SILESIA |
| DM | SPACER |
| DN | SPONGE |
| DP | TAFFETA |
| DQ | TERRY |
| DR | TICKING TWILL |
| DS | TOW TARGET |
| DT | TRICOTINE |
| DU | TROPICAL |
| DV | TWEED |
| DW | TWILL |
| DY | VELOUR |
| DX | VELVET |
| DZ | WAFFLE |
| EA | WHIPCORD |
| EB | WIGAN |
| EC | WIND RESISTANT OXFORD |
| ED | WIND RESISTANT POPLIN |
| EE | WIND RESISTANT SATEEN |
| EF | WIND RESISTANT TWILL |
| EG | WOVEN ROVING |
CQHG*DFABRIC DESIGN
AN ARTISTIC OR MECHANICAL DESIGN THAT IS IMPRINTED ON,EMBODIED IN,OR OTHERWISE CAUSED TO BECOME AN INTEGRAL OR APPARENT PART OF THE FABRIC.
Enter the applicable reply code from the table below
(CQHGDAG*;CQHGDA$DAH*)
| Table 1 |
| Reply Code (AF83) | Reply |
| A | ANY ACCEPTABLE |
| BG | GRID PATTERN |
| AB | PRINTED CAMOUFLAGE |
| AC | PRINTED CAMOUFLAGE-WOVEN RIPSTOP |
| AD | PRINTED CHECKS |
| AE | PRINTED FLORAL |
| AF | PRINTED GEOMETRIC |
| AG | PRINTED STRIPES |
| AH | SOLID COLOR-WOVEN INSIGNIA |
| AJ | SOLID COLOR-WOVEN PATTERN |
| AK | SOLID COLOR-WOVEN RIPSTOP PATTERN |
| AL | WOVEN CHECKS |
| AM | WOVEN FLORAL |
| AN | WOVEN GEOMETRIC |
| BF | WOVEN NOVELTY |
| AP | WOVEN STRIPES |
HUESDCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(HUES3AVFDRE0000*;HUES3AVFDRE0000$DTA0000*;HUES3AVFDRE0000$$DTA0000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AUO | LINER |
| 3AUV | OUTER LAYER |
| 3AVF | MAIN BODY |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD06) | Reply |
| AL0000 | ALUMINUM |
| A | ANY ACCEPTABLE |
| RG0075 | APRICOT |
| BE0000 | BEIGE |
| BL0000 | BLACK |
| BL0032 | BLACK, FED STD 595, 27038 |
| BL0033 | BLACK, FED STD 595, 37038 |
| BL0170 | BLACK, SHADE 102002 |
| BL0164 | BLACK, SHADE 102201 |
| BL0169 | BLACK, SHADE 102301 |
| BL0149 | BLACK, SHADE 97308 |
| BL0112 | BLACK, US ARMY, 357 |
| BL0129 | BLACK, US ARMY, 383 |
| BL0127 | BLACK, US MARINE CORPS, 2608 |
| BU0000 | BLUE |
| BU0475 | BLUE, BUGATTI |
| BU0069 | BLUE, CADET |
| BU0323 | BLUE, COLOR ASSN OF THE US, 65010 |
| BU0005 | BLUE, DARK |
| BU0252 | BLUE, DARK, 11, STILLWATER WORSTED MILLS INC |
| BU0476 | BLUE, DARK, FRENCH MILITARY POLICE |
| BU0477 | BLUE, FRENCH ARMY |
| BU0479 | BLUE, FRENCH MILITARY POLICE |
| BU0480 | BLUE, GLOSSY |
| BU0360 | BLUE, GRAY |
| BU0026 | BLUE, LIGHT |
| BU0504 | BLUE, LIGHT, MOUNTAIN LIGHT INFANTRY |
| BU0481 | BLUE, LOUISE |
| BU0029 | BLUE, MEDIUM |
| BU0507 | BLUE, MOUNTAIN LIGHT INFANTRY |
| BU0033 | BLUE, NAVY |
| BU0100 | BLUE, POWDER |
| BU0042 | BLUE, ROYAL |
| BU0409 | BLUE, SHADE 94305 |
| BU0410 | BLUE, SHADE 94306 |
| BU0411 | BLUE, SHADE 94308 |
| BU0412 | BLUE, SHADE 94310 |
| BU0413 | BLUE, SHADE 94314 |
| BU0414 | BLUE, SHADE 94324 |
| BU0047 | BLUE, SKY |
| BU0236 | BLUE, US AIR FORCE ACADEMY, 500 |
| BU0361 | BLUE, US AIR FORCE ACADEMY, 505 |
| BU0237 | BLUE, US AIR FORCE, 1084 |
| BU0289 | BLUE, US AIR FORCE, 1086 |
| BU0350 | BLUE, US AIR FORCE, 1126-OBSOLETE |
| BU0292 | BLUE, US AIR FORCE, 1515 |
| BU0293 | BLUE, US AIR FORCE, 1516 |
| BU0294 | BLUE, US AIR FORCE, 1517 |
| BU0239 | BLUE, US AIR FORCE, 1549 |
| BU0295 | BLUE, US AIR FORCE, 1550 |
| BU0362 | BLUE, US AIR FORCE, 1558 |
| BU0367 | BLUE, US AIR FORCE, 1577 |
| BU0380 | BLUE, US AIR FORCE, 1578 |
| BU0415 | BLUE, US AIR FORCE, 1579 |
| BU0352 | BLUE, US AIR FORCE, 1588 |
| BU0418 | BLUE, US AIR FORCE, 1598 |
| BU0474 | BLUE, US AIR FORCE, 1608 |
| BU0503 | BLUE, US AIR FORCE, 1612 |
| BU0101 | BLUE, US AIR FORCE, 1620 |
| BU0353 | BLUE, US ARMY, 14 |
| BU0297 | BLUE, US ARMY, 150 |
| BU0298 | BLUE, US ARMY, 151 |
| BU0258 | BLUE, US ARMY, 16 |
| BU0398 | BLUE, US ARMY, 202 |
| BU0363 | BLUE, US ARMY, 293 |
| BU0260 | BLUE, US ARMY, 324-OBSOLETE |
| BU0456 | BLUE, US ARMY, 450 |
| BU0457 | BLUE, US ARMY, 451 |
| BU0302 | BLUE, US MARINE CORPS, 2317 |
| BU0446 | BLUE, US MARINE CORPS, 2318 |
| BU0483 | BLUE, US MARINE CORPS, 2319 |
| BU0305 | BLUE, US NAVY, 3301-OBSOLETE |
| BU0266 | BLUE, US NAVY, 3313-OBSOLETE |
| BU0307 | BLUE, US NAVY, 3317-OBSOLETE |
| BU0119 | BLUE, US NAVY, 3320-OBSOLETE |
| BU0337 | BLUE, US NAVY, 3329 |
| BU0245 | BLUE, US NAVY, 3331 |
| BU0269 | BLUE, US NAVY, 3346 |
| BU0364 | BLUE, US NAVY, 3347-OBSOLETE |
| BU0365 | BLUE, US NAVY, 3349-OBSOLETE |
| BU0366 | BLUE, US NAVY, 3351 |
| BU0308 | BLUE, US NAVY, 3358 |
| BU0347 | BLUE, US NAVY, 3362 |
| BU0338 | BLUE, US NAVY, 3364 |
| BU0386 | BLUE, US NAVY, 3371 |
| BU0387 | BLUE, US NAVY, 3372 |
| BU0458 | BLUE, US NAVY, 3374 |
| BU0466 | BLUE, US NAVY, 3375 |
| BU0501 | BLUE, US NAVY, 3380 |
| BU0506 | BLUE, US NAVY, 3384 |
| BR0000 | BROWN |
| BR0054 | BROWN, BUTTERNUT |
| BR0008 | BROWN, CHOCOLATE |
| BR0010 | BROWN, DARK |
| BR0011 | BROWN, EARTH |
| BR0003 | BROWN, LIGHT |
| BR0019 | BROWN, RUST |
| BR0104 | BROWN, US ARMY, 356 |
| BR0136 | BROWN, US ARMY, 381 |
| BR0137 | BROWN, US ARMY, 382 |
| BR0153 | BROWN, US ARMY, 436 |
| BR0178 | BROWN, US ARMY, 463 |
| BR0189 | BROWN, US ARMY, 493 |
| MS0013 | BUFF |
| MS0382 | CRANBERRY |
| MS0021 | ECRU |
| GL0000 | GOLD |
| GL0023 | GOLD, SHADE 99317 |
| GL0024 | GOLD, SHADE 99319 |
| GY0034 | GRAY, BANKERS |
| GY0228 | GRAY, BLUE FRENCH AIR FORCE |
| GY0229 | GRAY, BLUE SHADOWED |
| GY0230 | GRAY, BLUISH IRON |
| GY0007 | GRAY, CHARCOAL |
| GY0008 | GRAY, DARK |
| GY0231 | GRAY, DARK BEIGE |
| GY0232 | GRAY, DARK IRON |
| GY0187 | GRAY, FED STD 595, 26122 |
| GY0162 | GRAY, FED STD 595, 36293 |
| GY0249 | GRAY, FRENCH LAND |
| GY0002 | GRAY, LIGHT |
| GY0014 | GRAY, MEDIUM |
| GY0016 | GRAY, OXFORD |
| GY0019 | GRAY, SILVER |
| GY0143 | GRAY, US AIR FORCE, 1154-OBSOLETE |
| GY0250 | GRAY, US AIR FORCE, 1615 |
| GY0170 | GRAY, US ARMY, 187-OBSOLETE |
| GY0233 | GRAY, US ARMY, 466 |
| GY0234 | GRAY, US ARMY, 467 |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0142 | GREEN, BRIGHT |
| GR0020 | GREEN, DARK |
| GR0206 | GREEN, FED STD 595, 34096 |
| GR0460 | GREEN, FOREIGN LEGION, FRENCH ARMY |
| GR0024 | GREEN, FOREST |
| GR0461 | GREEN, FRENCH ARMY |
| GR0026 | GREEN, GRAY |
| GR0148 | GREEN, JADE |
| GR0032 | GREEN, LIGHT |
| GR0006 | GREEN, MEDIUM |
| GR0050 | GREEN, MIST |
| GR0323 | GREEN, MUNSELL, 10 5.6/2.0 |
| GR0484 | GREEN, NATO |
| GR0462 | GREEN, NATO INFRARED |
| GR0011 | GREEN, OLIVE |
| GR0007 | GREEN, SAGE |
| GR0413 | GREEN, SHADE 95303 |
| GR0394 | GREEN, SHADE 95708 |
| GR0419 | GREEN, SHADE 95711 |
| GR0395 | GREEN, SHADE 95730 |
| GR0040 | GREEN, SPRUCE |
| GR0301 | GREEN, US AIR FORCE, 1509 |
| GR0302 | GREEN, US AIR FORCE, 1511 |
| GR0232 | GREEN, US AIR FORCE, 1514 |
| GR0258 | GREEN, US AIR FORCE, 1518-OBSOLETE |
| GR0259 | GREEN, US AIR FORCE, 1524 |
| GR0334 | GREEN, US AIR FORCE, 1527 |
| GR0304 | GREEN, US AIR FORCE, 1535 |
| GR0305 | GREEN, US AIR FORCE, 1565 |
| GR0381 | GREEN, US AIR FORCE, 1590 |
| GR0296 | GREEN, US ARMY, 106 |
| GR0297 | GREEN, US ARMY, 107 |
| GR0298 | GREEN, US ARMY, 108 |
| GR0324 | GREEN, US ARMY, 109 |
| GR0254 | GREEN, US ARMY, 180 |
| GR0299 | GREEN, US ARMY, 207 |
| GR0335 | GREEN, US ARMY, 290 |
| GR0221 | GREEN, US ARMY, 344 |
| GR0222 | GREEN, US ARMY, 354 |
| GR0223 | GREEN, US ARMY, 355 |
| GR0266 | GREEN, US ARMY, 371 |
| GR0360 | GREEN, US ARMY, 396 |
| GR0217 | GREEN, US ARMY, 44 |
| GR0463 | GREEN, US ARMY, 483 |
| GR0483 | GREEN, US ARMY, 489 |
| GR0339 | GREEN, US ARMY, 507 |
| GR0224 | GREEN, US MARINE CORPS, 2205-OBSOLETE |
| GR0237 | GREEN, US MARINE CORPS, 2207 |
| GR0225 | GREEN, US MARINE CORPS, 2234 |
| GR0226 | GREEN, US MARINE CORPS, 2235-OBSOLETE |
| GR0336 | GREEN, US MARINE CORPS, 2236 |
| GR0273 | GREEN, US MARINE CORPS, 2237 |
| GR0333 | GREEN, US MARINE CORPS, 2241 |
| GR0227 | GREEN, US NAVY, 3410 |
| GR0382 | GREEN, US NAVY, 3423 |
| GR0279 | GREEN, US NAVY, 3434 |
| GR0337 | GREEN, US NAVY, 3452 |
| GR0042 | GREEN, YELLOW |
| KH0000 | KHAKI |
| KH0007 | KHAKI, COLOR ASSN OF THE US, 70188 |
| KH0035 | KHAKI, DARK |
| KH0036 | KHAKI, GREEN |
| KH0037 | KHAKI, LIGHT |
| KH0038 | KHAKI, MARBLED LIGHT |
| KH0022 | KHAKI, SHADE 96800 |
| KH0004 | KHAKI, US ARMY, 1 |
| KH0020 | KHAKI, US ARMY, 384 |
| KH0041 | KHAKI, US ARMY, 494 |
| KH0006 | KHAKI, US MARINE CORPS, 2101 |
| KH0011 | KHAKI, US MARINE CORPS, 2111-OBSOLETE |
| KH0012 | KHAKI, US MARINE CORPS, 2115 |
| KH0013 | KHAKI, US MARINE CORPS, 2118-OBSOLETE |
| KH0005 | KHAKI, US MARINE CORPS, M-1 |
| KH0032 | KHAKI, US NAVY, 3729 |
| MA0000 | MAROON |
| MA0016 | MAROON, LIGHT |
| MA0013 | MAROON, US ARMY, 453 |
| MS0103 | MUSTARD |
| NA0000 | NATURAL |
| MS0301 | NICKEL, COLOR ASSN OF THE US, 70152 |
| LD0000 | OLIVE DRAB |
| LD0014 | OLIVE DRAB, US ARMY, 177 |
| LD0012 | OLIVE DRAB, US ARMY, 7 |
| RG0000 | ORANGE |
| RG0049 | ORANGE, COLOR ASSN OF THE US, 70072 |
| RG0045 | ORANGE, US NAVY, 3601 |
| RG0059 | ORANGE, US NAVY, 3604 |
| MS0337 | PIMENTO, COLOR ASSN OF THE US, 70042 |
| PK0000 | PINK |
| PU0039 | PLUM |
| RE0000 | RED |
| RE0039 | RED, EARTH |
| RE0256 | RED, SHADE 99318 |
| MS0379 | RESEDA |
| MS0049 | SAND |
| RE0022 | SCARLET |
| SL0004 | SILVER, COLOR ASSN OF THE US, 70151 |
| TA0000 | TAN |
| TA0033 | TAN, COLOR ASSN OF THE US, 66035 |
| TA0062 | TAN, SHADE 96000 |
| TA0067 | TAN, SHADE 96312 |
| TA0065 | TAN, SHADE 96409 |
| TA0066 | TAN, SHADE 96411 |
| TA0089 | TAN, SHADE 96702 |
| TA0068 | TAN, SHADE 96704 |
| TA0069 | TAN, SHADE 96705 |
| TA0070 | TAN, SHADE 96707 |
| TA0071 | TAN, SHADE 96714 |
| TA0016 | TAN, US AIR FORCE, 1505 |
| TA0029 | TAN, US ARMY, 125-OBSOLETE |
| TA0039 | TAN, US ARMY, 379 |
| TA0040 | TAN, US ARMY, 380 |
| TA0034 | TAN, US ARMY, 443 |
| TA0032 | TAN, US ARMY, 445 |
| TA0054 | TAN, US ARMY, 448 |
| TA0096 | TAN, US ARMY, 492 |
| TA0035 | TAN, US NAVY, 3726 |
| MS0054 | TAUPE |
| MS0315 | TAUPE, US ARMY, 121-OBSOLETE |
| MS0388 | VANILLA, FRENCH |
| MS0380 | WHISKEY |
| WH0000 | WHITE |
| WH0113 | WHITE, SHADE 91304 |
| WH0118 | WHITE, SHADE 91316 |
| WH0090 | WHITE, US MARINE CORPS, 2412 |
| WH0100 | WHITE, US NAVY, 3005-OBSOLETE |
| WH0047 | WHITE, US NAVY, 3006 |
| WH0091 | WHITE, US NAVY, 3013 |
| WH0092 | WHITE, US NAVY, 3024 |
| WH0101 | WHITE, US NAVY, 3025-OBSOLETE |
| WH0094 | WHITE, US NAVY, 3026-OBSOLETE |
| WH0095 | WHITE, US NAVY, 3034-OBSOLETE |
| WH0083 | WHITE, US NAVY, 3053 |
| YE0000 | YELLOW |
| YE0013 | YELLOW, EARTH |
| YE0161 | YELLOW, MAIZE |
| YE0162 | YELLOW, MUSTARD |
| YE0176 | YELLOW, US NAVY, 3511 |
AJMXDGARMENT SIZE
A DESIGNATION INDICATING ONE OF A SERIES OF GRADUATED CLASSIFICATIONS OF MANUFACTURED CLOTHING ITEMS IDENTIFIED BY NUMBER,LETTER,AND/OR WORD,EACH REPRESENTING A DIMENSION OR SET OF DIMENSIONS.
Enter the applicable reply code from the table below
(AJMXDECH*;AJMXDFKH$DFFT*)
| Table 1 |
| Reply Code (AF81) | Reply |
| BGW | 0 |
| AAB | 1 |
| ABQ | 10 |
| KDX | 10 JUNIOR PETITE |
| KDY | 10 JUNIOR REGULAR |
| KDZ | 10 JUNIOR TALL |
| ENY | 10 LARGE |
| ABR | 10 LONG |
| EQE | 10 LONG-AVERAGE |
| EQF | 10 LONG-PLUS |
| KEA | 10 MISSES PETITE |
| KFV | 10 MISSES REGULAR |
| KEB | 10 MISSES TALL |
| ABT | 10 REGULAR |
| EQG | 10 REGULAR-AVERAGE |
| EQH | 10 REGULAR-MINUS |
| ABU | 10 REGULAR-PLUS |
| ABV | 10 SHORT |
| EQJ | 10 SHORT-AVERAGE |
| EQK | 10 SHORT-MINUS |
| ABW | 10 SHORT-PLUS |
| JLX | 10 TO 12 SMALL |
| KEC | 10 WOMENS PETITE |
| KED | 10 WOMENS REGULAR |
| KEE | 10 WOMENS TALL |
| EQL | 10 X-LONG |
| ABX | 10 X-SHORT |
| EQM | 10 X-SHORT-AVERAGE |
| EQN | 10 X-SHORT-PLUS |
| CZC | 100 |
| KCN | 100 LONG |
| KCM | 100 REGULAR |
| KCL | 100 SHORT |
| KCP | 100 X-LONG |
| KCK | 100 X-SHORT |
| JYY | 101 LONG |
| JYZ | 101 PORTLY |
| JZA | 101 REGULAR |
| ABY | 10-1/2 |
| GNL | 102 CORPULENT |
| GNM | 102 LONG |
| GNN | 102 PORTLY |
| GNP | 102 REGULAR |
| GNQ | 102 SHORT |
| FXQ | 102 SLIM |
| GNR | 102 STOUT |
| ENC | 104 |
| GNT | 104 LONG |
| GNW | 104 PORTLY |
| FWE | 104 REGULAR |
| GNX | 104 SHORT |
| KCR | 104 X-LONG |
| KCQ | 104 X-SHORT |
| GPA | 105 |
| KLC | 105 TO 115 |
| JZB | 106 LONG |
| JZC | 106 PORTLY |
| JZD | 106 REGULAR |
| GPB | 107 CORPULENT |
| GPC | 107 LONG |
| GPD | 107 PORTLY |
| GPE | 107 REGULAR |
| GPF | 107 SHORT |
| GPG | 107 SLIM |
| GPH | 107 STOUT |
| KCS | 108 |
| KCW | 108 LONG |
| KCV | 108 REGULAR |
| KCU | 108 SHORT |
| KCX | 108 X-LONG |
| KCT | 108 X-SHORT |
| GWB | 10X27 SHORT |
| GWC | 10X28 REGULAR |
| GWD | 10X28 SHORT |
| GWE | 10X29 LONG |
| GWF | 10X29 REGULAR |
| GWG | 10X29 SHORT |
| GWH | 10X30 LONG |
| GWJ | 10X30 REGULAR |
| GWK | 10X31 LONG |
| JNT | 10X33 X-LONG |
| ABZ | 11 |
| ACB | 11 LONG |
| JQJ | 11 LONG-PLUS |
| HBS | 11 PETITE |
| ACC | 11 REGULAR |
| JQK | 11 REGULAR-PLUS |
| ACD | 11 SHORT |
| JQL | 11 SHORT-PLUS |
| GPR | 110 |
| CNS | 110 LONG |
| FWF | 110 REGULAR |
| CNQ | 110 SHORT |
| JZE | 111 LONG |
| JZF | 111 PORTLY |
| JZG | 111 REGULAR |
| KBT | 112 |
| GPS | 112 CORPULENT |
| GPT | 112 LONG |
| GPW | 112 PORTLY |
| GPX | 112 REGULAR |
| GPY | 112 SHORT |
| GPZ | 112 SLIM |
| GQA | 112 STOUT |
| KCZ | 112 X-LONG |
| KCY | 112 X-SHORT |
| GQJ | 115 |
| JLF | 116 |
| KDC | 116 LONG |
| FWG | 116 REGULAR |
| KDB | 116 SHORT |
| KDD | 116 X-LONG |
| KDA | 116 X-SHORT |
| GQK | 117 CORPULENT |
| GQL | 117 LONG |
| GQM | 117 PORTLY |
| GQN | 117 REGULAR |
| GQP | 117 SHORT |
| GQQ | 117 SLIM |
| GQR | 117 STOUT |
| ACG | 12 |
| KEF | 12 JUNIOR PETITE |
| KEG | 12 JUNIOR REGULAR |
| KEH | 12 JUNIOR TALL |
| ACH | 12 LONG |
| EQP | 12 LONG-AVERAGE |
| EQQ | 12 LONG-MINUS |
| EQR | 12 LONG-PLUS |
| KEJ | 12 MISSES PETITE |
| KFW | 12 MISSES REGULAR |
| KEK | 12 MISSES TALL |
| ACK | 12 REGULAR |
| EQS | 12 REGULAR-AVERAGE |
| EQT | 12 REGULAR-MINUS |
| ACL | 12 REGULAR-PLUS |
| ACM | 12 SHORT |
| EQW | 12 SHORT-AVERAGE |
| EQX | 12 SHORT-MINUS |
| ACN | 12 SHORT-PLUS |
| EQY | 12 SMALL |
| HBY | 12 TALL |
| HSF | 12 TO 14 MEDIUM LONG |
| HSG | 12 TO 14 MEDIUM REGULAR |
| HSH | 12 TO 14 MEDIUM SHORT |
| KBF | 12 TO 16 SMALL |
| KEL | 12 WOMENS PETITE |
| KEM | 12 WOMENS REGULAR |
| KEN | 12 WOMENS TALL |
| EQZ | 12 X-LONG |
| ACP | 12 X-SHORT |
| GWL | 12 X-SHORT-AVERAGE |
| ERA | 12 X-SHORT-MINUS |
| ERB | 12 X-SHORT-PLUS |
| CZD | 120 |
| KDH | 120 LONG |
| KDG | 120 REGULAR |
| KDF | 120 SHORT |
| KDJ | 120 X-LONG |
| KDE | 120 X-SHORT |
| GRB | 122 CORPULENT |
| GRC | 122 LONG |
| GRD | 122 PORTLY |
| FWH | 122 REGULAR |
| GRE | 122 SHORT |
| GRF | 122 SLIM |
| GRG | 122 STOUT |
| GRJ | 124 LONG |
| CPH | 124 MEDIUM |
| CPJ | 124 X-LONG |
| GRQ | 125 |
| GRR | 127 CORPULENT |
| GRS | 127 LONG |
| GRT | 127 PORTLY |
| GRW | 127 REGULAR |
| GRX | 127 SHORT |
| GRY | 127 SLIM |
| GRZ | 127 STOUT |
| GWM | 12X27 SHORT |
| GWN | 12X28 REGULAR |
| GWP | 12X28 SHORT |
| GWQ | 12X29 LONG |
| GWR | 12X29 REGULAR |
| GWS | 12X29 SHORT |
| GWT | 12X30 LONG |
| GWW | 12X30 REGULAR |
| GWX | 12X31 LONG |
| JNC | 12X33 X-LONG |
| ACX | 13 |
| ACZ | 13 LONG |
| JQN | 13 LONG-PLUS |
| JLY | 13 PETITE |
| ADA | 13 REGULAR |
| JQP | 13 REGULAR-PLUS |
| ADB | 13 SHORT |
| JQQ | 13 SHORT-PLUS |
| GSH | 132 CORPULENT |
| GSJ | 132 LONG |
| GSK | 132 PORTLY |
| GSL | 132 REGULAR |
| GSM | 132 SHORT |
| GSN | 132 SLIM |
| GSP | 132 STOUT |
| ADF | 14 |
| KEP | 14 JUNIOR PETITE |
| KEQ | 14 JUNIOR REGULAR |
| KER | 14 JUNIOR TALL |
| CPN | 14 LARGE |
| ADG | 14 LONG |
| ERC | 14 LONG-AVERAGE |
| ERD | 14 LONG-MINUS |
| ERE | 14 LONG-PLUS |
| KES | 14 MISSES PETITE |
| KFX | 14 MISSES REGULAR |
| KET | 14 MISSES TALL |
| ADJ | 14 REGULAR |
| ERF | 14 REGULAR-AVERAGE |
| ERG | 14 REGULAR-MINUS |
| ADK | 14 REGULAR-PLUS |
| ADL | 14 SHORT |
| ERH | 14 SHORT-AVERAGE |
| ERJ | 14 SHORT-MINUS |
| ADM | 14 SHORT-PLUS |
| JLZ | 14 TO 16 MEDIUM |
| KEU | 14 WOMENS PETITE |
| KEV | 14 WOMENS REGULAR |
| KEW | 14 WOMENS TALL |
| ERK | 14 X-LONG |
| ADN | 14 X-SHORT |
| ERL | 14 X-SHORT-AVERAGE |
| ERM | 14 X-SHORT-MINUS |
| ERN | 14 X-SHORT-PLUS |
| GWY | 14X28 SHORT |
| GWZ | 14X29 REGULAR |
| GXA | 14X29 SHORT |
| GXB | 14X30 LONG |
| GXC | 14X30 REGULAR |
| GXD | 14X30 SHORT |
| GXE | 14X31 LONG |
| GXF | 14X31 REGULAR |
| GXG | 14X32 LONG |
| JND | 14X33 X-LONG |
| JNE | 14X35 X-LONG |
| ADX | 15 LONG |
| JSK | 15 LONG-PLUS |
| JMA | 15 PETITE |
| ADY | 15 REGULAR |
| JQS | 15 REGULAR-PLUS |
| ADZ | 15 SHORT |
| JQT | 15 SHORT-PLUS |
| AEB | 16 |
| KEX | 16 JUNIOR PETITE |
| KEY | 16 JUNIOR REGULAR |
| KEZ | 16 JUNIOR TALL |
| AEC | 16 LONG |
| ERP | 16 LONG-AVERAGE |
| ERQ | 16 LONG-MINUS |
| ERR | 16 LONG-PLUS |
| ERS | 16 MEDIUM |
| KFA | 16 MISSES PETITE |
| KFY | 16 MISSES REGULAR |
| KFB | 16 MISSES TALL |
| AEE | 16 REGULAR |
| ERT | 16 REGULAR-AVERAGE |
| ERW | 16 REGULAR-MINUS |
| AEF | 16 REGULAR-PLUS |
| AEG | 16 SHORT |
| ERX | 16 SHORT-AVERAGE |
| ERY | 16 SHORT-MINUS |
| AEH | 16 SHORT-PLUS |
| HSJ | 16 TO 18 LARGE LONG |
| HSK | 16 TO 18 LARGE REGULAR |
| HSL | 16 TO 18 LARGE SHORT |
| KFC | 16 WOMENS PETITE |
| KFD | 16 WOMENS REGULAR |
| KFE | 16 WOMENS TALL |
| ERZ | 16 X-LONG |
| AEJ | 16 X-SHORT |
| ESA | 16 X-SHORT-AVERAGE |
| ESB | 16 X-SHORT-MINUS |
| ESC | 16 X-SHORT-PLUS |
| GXH | 16X28 SHORT |
| GXJ | 16X29 REGULAR |
| GXK | 16X29 SHORT |
| GXL | 16X30 LONG |
| GXM | 16X30 REGULAR |
| GXN | 16X30 SHORT |
| GXP | 16X31 LONG |
| GXQ | 16X31 REGULAR |
| GXR | 16X32 LONG |
| JNF | 16X33 X-LONG |
| JNG | 16X35 X-LONG |
| AES | 17 LONG |
| JSL | 17 LONG-PLUS |
| AET | 17 REGULAR |
| JSM | 17 REGULAR-PLUS |
| AEV | 17 SHORT |
| JQV | 17 SHORT-PLUS |
| AEX | 18 |
| CPP | 18 LARGE |
| AEY | 18 LONG |
| ESD | 18 LONG-AVERAGE |
| ESE | 18 LONG-MINUS |
| ESF | 18 LONG-PLUS |
| KFF | 18 MISSES PETITE |
| KFZ | 18 MISSES REGULAR |
| KFG | 18 MISSES TALL |
| AFA | 18 REGULAR |
| ESG | 18 REGULAR-AVERAGE |
| ESH | 18 REGULAR-MINUS |
| AFB | 18 REGULAR-PLUS |
| AFC | 18 SHORT |
| ESJ | 18 SHORT-AVERAGE |
| ESK | 18 SHORT-MINUS |
| AFD | 18 SHORT-PLUS |
| JMB | 18 TO 20 LARGE |
| KBG | 18 TO 20 MEDIUM |
| KFH | 18 WOMENS PETITE |
| KFJ | 18 WOMENS REGULAR |
| KFK | 18 WOMENS TALL |
| ESL | 18 X-LONG |
| AFE | 18 X-SHORT |
| ESM | 18 X-SHORT-AVERAGE |
| ESN | 18 X-SHORT-MINUS |
| ESP | 18 X-SHORT-PLUS |
| GXS | 18X29 SHORT |
| GXT | 18X30 REGULAR |
| GXW | 18X30 SHORT |
| GXX | 18X31 LONG |
| GXY | 18X31 REGULAR |
| GXZ | 18X32 LONG |
| JNH | 18X33 X-LONG |
| JNJ | 18X35 X-LONG |
| AAC | 2 |
| AWS | 20 |
| ESQ | 20 LARGE |
| AFM | 20 LONG |
| ESR | 20 LONG-AVERAGE |
| ESS | 20 LONG-MINUS |
| KFL | 20 MISSES PETITE |
| KGA | 20 MISSES REGULAR |
| KFM | 20 MISSES TALL |
| AFP | 20 REGULAR |
| EST | 20 REGULAR-AVERAGE |
| ESW | 20 REGULAR-MINUS |
| ESX | 20 REGULAR-PLUS |
| AFQ | 20 SHORT |
| JRA | 20 SHORT-PLUS |
| HSM | 20 TO 22 X-LARGE LONG |
| HSN | 20 TO 22 X-LARGE REGULAR |
| HSP | 20 TO 22 X-LARGE SHORT |
| ESY | 20 X-LONG |
| AFR | 20 X-SHORT |
| GYA | 20X29 SHORT |
| GYB | 20X30 REGULAR |
| GYC | 20X30 SHORT |
| GYD | 20X31 LONG |
| GYE | 20X31 REGULAR |
| GYF | 20X32 LONG |
| JNK | 20X33 X-LONG |
| JNL | 20X35 X-LONG |
| AFZ | 22 |
| CPQ | 22 LARGE |
| AGA | 22 LONG |
| AGB | 22 REGULAR |
| ESZ | 22 REGULAR-AVERAGE |
| ETA | 22 REGULAR-MINUS |
| AGC | 22 SHORT |
| ETB | 22 X-LONG |
| AGD | 22 X-SHORT |
| GYG | 22X30 SHORT |
| GYH | 22X31 REGULAR |
| GYJ | 22X31 SHORT |
| GYK | 22X32 LONG |
| GYL | 22X32 REGULAR |
| GYM | 22X33 LONG |
| JNM | 22X33 X-LONG |
| JNN | 22X35 X-LONG |
| AWW | 23 |
| ETC | 23 REGULAR |
| HAH | 23 TO 26 X-SMALL |
| GYT | 23X24 |
| HSQ | 23X34 REGULAR |
| AGL | 24 |
| AGM | 24 LONG |
| AGN | 24 REGULAR |
| AGP | 24 SHORT |
| ETE | 24 TO 26 X-SMALL |
| ETD | 24 X-LONG |
| AGQ | 24 X-SHORT |
| HSR | 24X27 |
| HSS | 24X29 |
| GYW | 24X34 |
| GYX | 24X36 |
| AWY | 25 |
| ETF | 25 LONG |
| ETG | 25 REGULAR |
| GDW | 25 SHORT |
| ETH | 25 X-SHORT |
| ETJ | 25X27 |
| ETK | 25X27 X-SHORT |
| ETL | 25X29 |
| ETM | 25X29 X-SHORT |
| ETN | 25X31 |
| ETP | 25X31 REGULAR |
| GYY | 25X34 |
| HST | 25X34 REGULAR |
| GYZ | 25X36 |
| HSW | 25X36 LONG |
| CST | 26 |
| ETQ | 26 LONG |
| ETR | 26 REGULAR |
| HND | 26 SHORT |
| BDM | 26 TO 28 |
| CSA | 26 TO 28 X-SMALL |
| ETT | 26 X-LONG |
| ETW | 26 X-SHORT |
| ETX | 26 X-SMALL |
| ETY | 26X25 |
| ETZ | 26X27 |
| EWA | 26X27 X-SHORT |
| EWB | 26X28 |
| EWC | 26X28 X-SHORT |
| EWD | 26X29 |
| EWE | 26X29 SHORT |
| EWF | 26X30 |
| EWG | 26X30 SHORT |
| EWH | 26X31 |
| EWJ | 26X31 REGULAR |
| EWK | 26X32 |
| EWL | 26X32 REGULAR |
| EWM | 26X33 |
| EWN | 26X33 LONG |
| HSX | 26X33 SHORT |
| EWP | 26X34 |
| EWQ | 26X34 LONG |
| EWR | 26X35 |
| HSY | 26X35 REGULAR |
| EWS | 26X35 X-LONG |
| ELR | 27 |
| JNS | 27 1/4 |
| EWT | 27 LONG |
| EWW | 27 REGULAR |
| EWX | 27 SHORT |
| CSB | 27 TO 30 SMALL |
| EWY | 27 X-LONG |
| EWZ | 27 X-SHORT |
| FSA | 27-1/2 X-SMALL |
| EXA | 27X25 |
| EXB | 27X27 |
| EXC | 27X27 X-SHORT |
| EXD | 27X28 |
| EXE | 27X28 X-SHORT |
| EXF | 27X29 |
| EXG | 27X29 X-SHORT |
| EXH | 27X30 |
| EXJ | 27X30 SHORT |
| HSZ | 27X30 X-SHORT |
| EXK | 27X31 |
| EXL | 27X31 REGULAR |
| EXM | 27X32 |
| EXN | 27X32 REGULAR |
| HTA | 27X32 SHORT |
| GZA | 27X33 |
| EXP | 27X33 LONG |
| EXQ | 27X34 |
| EXR | 27X34 LONG |
| HTB | 27X34 REGULAR |
| EXS | 27X35 |
| EXT | 27X35 X-LONG |
| GZB | 27X36 |
| HTC | 27X36 LONG |
| GZC | 27X37 |
| GZD | 27X38 |
| HTD | 27X38 X-LONG |
| GZE | 27X40 |
| AGY | 28 |
| AGZ | 28 LONG |
| AHA | 28 REGULAR |
| AHB | 28 SHORT |
| EXX | 28 TO 29 |
| EXY | 28 TO 30 SMALL |
| EXZ | 28 TO 31 SMALL |
| EXW | 28 X-LONG |
| AHC | 28 X-SHORT |
| FSB | 28-1/2 SMALL |
| EYA | 28X25 |
| EYB | 28X27 |
| EYC | 28X27 X-SHORT |
| EYD | 28X28 |
| EYE | 28X28 X-SHORT |
| EYF | 28X29 |
| EYG | 28X29 SHORT |
| EYH | 28X30 |
| EYJ | 28X30 SHORT |
| EYK | 28X31 |
| EYL | 28X31 REGULAR |
| EYM | 28X32 |
| EYN | 28X32 REGULAR |
| EYP | 28X33 |
| EYQ | 28X33 LONG |
| HTE | 28X33 SHORT |
| EYR | 28X34 |
| EYS | 28X34 LONG |
| EYT | 28X35 |
| HTF | 28X35 REGULAR |
| EYW | 28X35 X-LONG |
| EYX | 28X36 |
| GZF | 28X37 |
| HTG | 28X37 LONG |
| EYY | 28X38 |
| GZG | 28X39 |
| HTH | 28X39 X-LONG |
| AHD | 29 |
| FSC | 29 LARGE |
| AHE | 29 LONG |
| FSD | 29 MEDIUM |
| AHF | 29 REGULAR |
| AHG | 29 SHORT |
| FSE | 29 SMALL |
| FSF | 29 X-LARGE |
| EYZ | 29 X-LONG |
| AHH | 29 X-SHORT |
| FSG | 29-1/2 LARGE |
| FSH | 29-1/2 MEDIUM |
| EZA | 29X25 |
| EZB | 29X27 |
| EZC | 29X27 X-SHORT |
| EZD | 29X28 |
| EZE | 29X28 X-SHORT |
| EZF | 29X29 |
| EZG | 29X29 SHORT |
| EZH | 29X30 |
| EZJ | 29X30 SHORT |
| HTJ | 29X30 X-SHORT |
| EZK | 29X31 |
| EZL | 29X31 REGULAR |
| EZM | 29X32 |
| EZN | 29X32 REGULAR |
| HTK | 29X32 SHORT |
| EZP | 29X33 |
| EZQ | 29X33 LONG |
| EZR | 29X34 |
| EZS | 29X34 LONG |
| HTL | 29X34 REGULAR |
| EZT | 29X35 |
| EZW | 29X35 X-LONG |
| EZX | 29X36 |
| HTM | 29X36 LONG |
| GZH | 29X37 |
| EZY | 29X38 |
| HTN | 29X38 X-LONG |
| AAD | 3 |
| JPV | 3 LONG |
| JSG | 3 LONG-PLUS |
| HYS | 3 REGULAR |
| JPW | 3 REGULAR-PLUS |
| JPX | 3 SHORT |
| JSH | 3 SHORT-PLUS |
| AHJ | 30 |
| FSJ | 30 LARGE |
| AHK | 30 LONG |
| FSK | 30 MEDIUM |
| AHL | 30 REGULAR |
| AHM | 30 SHORT |
| EZZ | 30 SMALL |
| BDN | 30 TO 32 |
| FAN | 30 TO 32 SMALL |
| CSC | 30 TO 32 X-SMALL |
| FAR | 30 TO 33 SMALL |
| FSL | 30 X-LARGE |
| FAA | 30 X-LONG |
| AHN | 30 X-SHORT |
| FSM | 30-1/2 X-LARGE |
| FAB | 30X25 |
| FAC | 30X27 |
| FAD | 30X27 X-SHORT |
| FAE | 30X28 |
| FAF | 30X28 X-SHORT |
| FAG | 30X29 |
| FAH | 30X29 SHORT |
| FAJ | 30X30 |
| FAK | 30X30 SHORT |
| FAL | 30X31 |
| FAM | 30X31 REGULAR |
| FAP | 30X32 |
| FAQ | 30X32 REGULAR |
| FAS | 30X33 |
| FAT | 30X33 LONG |
| HTP | 30X33 SHORT |
| FAW | 30X34 |
| FAX | 30X34 LONG |
| FAY | 30X35 |
| HTQ | 30X35 REGULAR |
| FAZ | 30X35 X-LONG |
| FBA | 30X36 |
| FBB | 30X36 XX-LONG |
| FBC | 30X37 |
| HTR | 30X37 LONG |
| FBD | 30X37 XX-LONG |
| FBE | 30X38 |
| GZJ | 30X39 |
| HTS | 30X39 X-LONG |
| AHP | 31 |
| FSN | 31 LARGE |
| AHQ | 31 LONG |
| FSP | 31 MEDIUM |
| AHR | 31 REGULAR |
| AHS | 31 SHORT |
| FSQ | 31 SMALL |
| FBG | 31 TO 32 |
| FBH | 31 TO 33 MEDIUM |
| CSD | 31 TO 34 MEDIUM |
| FSR | 31 X-LARGE |
| FBF | 31 X-LONG |
| AHT | 31 X-SHORT |
| FBJ | 31X25 |
| FBK | 31X27 |
| FBL | 31X27 X-SHORT |
| FBM | 31X28 |
| FBN | 31X28 X-SHORT |
| FBP | 31X29 |
| FBQ | 31X29 SHORT |
| FBR | 31X30 |
| FBS | 31X30 SHORT |
| HTT | 31X30 X-SHORT |
| FBT | 31X31 |
| FBW | 31X31 REGULAR |
| FBX | 31X32 |
| FBY | 31X32 REGULAR |
| HTW | 31X32 SHORT |
| FBZ | 31X33 |
| FCA | 31X33 LONG |
| FCB | 31X34 |
| FCC | 31X34 LONG |
| HTX | 31X34 REGULAR |
| FCD | 31X35 |
| FCE | 31X35 LONG |
| FCF | 31X36 |
| HTY | 31X36 LONG |
| GZK | 31X37 |
| FCG | 31X38 |
| HTZ | 31X38 X-LONG |
| AHV | 32 |
| FSS | 32 LARGE |
| AHW | 32 LONG |
| FST | 32 MEDIUM |
| AHX | 32 REGULAR |
| AHY | 32 SHORT |
| FCH | 32 SMALL |
| FCJ | 32 TO 34 MEDIUM |
| ELY | 32 TO 34 X-SMALL |
| FCK | 32 TO 35 MEDIUM |
| AHZ | 32 X-LARGE |
| AJA | 32 X-LONG |
| AJB | 32 X-SHORT |
| FCL | 32X25 |
| FCM | 32X27 |
| FCN | 32X27 X-SHORT |
| FCP | 32X28 |
| FCQ | 32X28 X-SHORT |
| FCR | 32X29 |
| FCS | 32X29 SHORT |
| FCT | 32X30 |
| FCW | 32X30 SHORT |
| FCX | 32X31 |
| FCY | 32X31 REGULAR |
| FCZ | 32X32 |
| FDA | 32X32 REGULAR |
| FDB | 32X33 |
| FDC | 32X33 LONG |
| HWA | 32X33 SHORT |
| FDD | 32X34 |
| FDE | 32X34 LONG |
| FDF | 32X35 |
| HWB | 32X35 REGULAR |
| FDG | 32X35 X-LONG |
| FDH | 32X36 |
| FDJ | 32X36 XX-LONG |
| FDK | 32X37 |
| HWC | 32X37 LONG |
| FDL | 32X37 XX-LONG |
| FDM | 32X38 |
| GZL | 32X39 |
| HWD | 32X39 X-LONG |
| CPD | 32XL/40 |
| CPE | 32XL/40-LONG |
| AJC | 33 |
| AJD | 33 LONG |
| AJJ | 33 REGULAR |
| AJK | 33 SHORT |
| FDN | 33 TO 34 |
| AJM | 33 X-LONG |
| AJN | 33 X-SHORT |
| FDP | 33X25 |
| FDQ | 33X27 |
| FDR | 33X27 X-SHORT |
| FDS | 33X28 |
| FDT | 33X28 X-SHORT |
| FDW | 33X29 |
| FDX | 33X29 SHORT |
| FDY | 33X30 |
| FDZ | 33X30 SHORT |
| HWE | 33X30 X-SHORT |
| FFD | 33X31 |
| FFE | 33X31 REGULAR |
| FFF | 33X32 |
| FFG | 33X32 REGULAR |
| HWF | 33X32 SHORT |
| FFH | 33X33 |
| FFJ | 33X33 LONG |
| FFK | 33X34 |
| FFL | 33X34 LONG |
| HWG | 33X34 REGULAR |
| FFM | 33X35 |
| FFN | 33X35 X-LONG |
| FFP | 33X36 |
| HWH | 33X36 LONG |
| GZM | 33X37 |
| FFQ | 33X38 |
| HWJ | 33X38 X-LONG |
| AJP | 34 |
| FSW | 34 LARGE |
| AJQ | 34 LONG |
| FFR | 34 MEDIUM |
| AJW | 34 REGULAR |
| AJX | 34 SHORT |
| EMA | 34 SMALL |
| BDP | 34 TO 36 |
| FFS | 34 TO 36 LARGE |
| FFT | 34 TO 36 MEDIUM |
| HWK | 34 TO 36 SHORT |
| CSE | 34 TO 36 SMALL |
| HWL | 34 TO 36 SMALL LONG |
| HWM | 34 TO 36 SMALL REGULAR |
| FFW | 34 TO 37 MEDIUM |
| JMR | 34 TO 43 SMALL-MEDIUM |
| AJY | 34 X-LARGE |
| AJZ | 34 X-LONG |
| AKA | 34 X-SHORT |
| FFX | 34X25 |
| FFY | 34X27 |
| FFZ | 34X27 X-SHORT |
| FGA | 34X28 |
| FGB | 34X28 X-SHORT |
| FGC | 34X29 |
| FGD | 34X29 SHORT |
| FGE | 34X30 |
| FGF | 34X30 SHORT |
| FGG | 34X31 |
| FGH | 34X31 REGULAR |
| FGJ | 34X32 |
| FGK | 34X32 REGULAR |
| FGL | 34X33 |
| FGM | 34X33 LONG |
| HWN | 34X33 SHORT |
| FGN | 34X34 |
| FGP | 34X34 LONG |
| FGQ | 34X35 |
| HWP | 34X35 REGULAR |
| FGR | 34X35 X-LONG |
| FGS | 34X36 |
| FGT | 34X36 XX-LONG |
| FGW | 34X37 |
| HWQ | 34X37 LONG |
| FGX | 34X37 XX-LONG |
| FGY | 34X38 |
| GZN | 34X39 |
| HWR | 34X39 X-LONG |
| AKB | 35 |
| AKC | 35 LONG |
| AKH | 35 REGULAR |
| AKJ | 35 SHORT |
| FGZ | 35 TO 36 |
| CSF | 35 TO 38 LARGE |
| AKL | 35 X-LONG |
| AKM | 35 X-SHORT |
| FHA | 35X25 |
| FHB | 35X27 |
| FHC | 35X27 X-SHORT |
| FHD | 35X28 |
| FHE | 35X28 X-SHORT |
| FHF | 35X29 |
| FHG | 35X29 SHORT |
| FHH | 35X30 |
| FHJ | 35X30 SHORT |
| HWS | 35X30 X-SHORT |
| FHK | 35X31 |
| FHL | 35X31 REGULAR |
| FHM | 35X32 |
| FHN | 35X32 REGULAR |
| HWT | 35X32 SHORT |
| FHP | 35X33 |
| FHQ | 35X33 LONG |
| FHR | 35X34 |
| FHS | 35X34 LONG |
| HWW | 35X34 REGULAR |
| FHT | 35X35 |
| FHW | 35X35 X-LONG |
| GZP | 35X36 |
| HWX | 35X36 LONG |
| GZQ | 35X37 |
| GZR | 35X38 |
| HWY | 35X38 X-LONG |
| AKN | 36 |
| AKP | 36 LONG |
| CXM | 36 MEDIUM |
| AKV | 36 REGULAR |
| AKW | 36 SHORT |
| FHX | 36 TO 38 LARGE |
| EMC | 36 TO 38 SMALL |
| FHY | 36 TO 39 LARGE |
| FHZ | 36 TO 40 LARGE |
| FJA | 36 TO 40 MEDIUM |
| AKX | 36 X-LARGE |
| AKY | 36 X-LONG |
| AKZ | 36 X-SHORT |
| FJB | 36X25 |
| FJC | 36X27 |
| FJD | 36X27 X-SHORT |
| FJE | 36X28 |
| FJF | 36X28 X-SHORT |
| FJG | 36X29 |
| FJH | 36X29 SHORT |
| FJJ | 36X30 |
| FJK | 36X30 SHORT |
| FJL | 36X31 |
| FJM | 36X31 REGULAR |
| FJN | 36X32 |
| FJP | 36X32 REGULAR |
| FJQ | 36X33 |
| FJR | 36X33 LONG |
| HWZ | 36X33 SHORT |
| FJS | 36X34 |
| FJT | 36X34 LONG |
| FJW | 36X35 |
| HXA | 36X35 REGULAR |
| FJX | 36X35 X-LONG |
| FJY | 36X36 |
| FJZ | 36X36 XX-LONG |
| FKA | 36X37 |
| HXB | 36X37 LONG |
| FKB | 36X37 XX-LONG |
| FKC | 36X38 |
| GZS | 36X39 |
| HXC | 36X39 X-LONG |
| ALA | 37 |
| ALB | 37 LONG |
| ALH | 37 REGULAR |
| ALJ | 37 SHORT |
| FKD | 37 TO 38 |
| FKE | 37 TO 39 X-LARGE |
| HXD | 37 TO 41 MEDIUM |
| JTH | 37 TO 41 SMALL MEDIUM |
| ALN | 37 X-LONG |
| ALP | 37 X-SHORT |
| JME | 37X25 |
| FKF | 37X27 |
| FKG | 37X27 X-SHORT |
| FKH | 37X28 |
| FKJ | 37X28 X-SHORT |
| FKK | 37X29 |
| FKL | 37X29 SHORT |
| FKM | 37X30 |
| FKN | 37X30 SHORT |
| HXE | 37X30 X-SHORT |
| FKP | 37X31 |
| FKQ | 37X31 REGULAR |
| FKR | 37X32 |
| FKS | 37X32 REGULAR |
| HXF | 37X32 SHORT |
| FKT | 37X33 |
| FKW | 37X33 LONG |
| FKX | 37X34 |
| FKY | 37X34 LONG |
| HXG | 37X34 REGULAR |
| FKZ | 37X35 |
| FLA | 37X35 X-LONG |
| GZT | 37X36 |
| HXH | 37X36 LONG |
| GZW | 37X37 |
| GYN | 37X38 |
| HXJ | 37X38 X-LONG |
| GZX | 37X40 |
| ALQ | 38 |
| FLB | 38 LARGE |
| ALR | 38 LONG |
| ALX | 38 REGULAR |
| ALY | 38 SHORT |
| BDQ | 38 TO 40 |
| FLC | 38 TO 40 LARGE |
| CSG | 38 TO 40 MEDIUM |
| HXK | 38 TO 40 MEDIUM LONG |
| HXL | 38 TO 40 MEDIUM REGULAR |
| HXM | 38 TO 40 MEDIUM SHORT |
| FLD | 38 TO 41 LARGE |
| FLE | 38 TO 44 LARGE |
| AMA | 38 X-LONG |
| AMB | 38 X-SHORT |
| FLF | 38X25 |
| FLG | 38X27 |
| FLH | 38X27 X-SHORT |
| FLJ | 38X28 |
| FLK | 38X28 X-SHORT |
| FLL | 38X29 |
| FLM | 38X29 SHORT |
| FLN | 38X30 |
| FLP | 38X30 SHORT |
| FLQ | 38X31 |
| FLR | 38X31 REGULAR |
| FLS | 38X32 |
| FLT | 38X32 REGULAR |
| FLW | 38X33 |
| FLX | 38X33 LONG |
| HXN | 38X33 SHORT |
| FLY | 38X34 |
| FLZ | 38X34 LONG |
| FMA | 38X35 |
| HXP | 38X35 REGULAR |
| FMB | 38X35 X-LONG |
| FMC | 38X36 |
| FMD | 38X36 XX-LONG |
| FME | 38X37 |
| HXQ | 38X37 LONG |
| FMF | 38X37 XX-LONG |
| FMG | 38X38 |
| GZY | 38X39 |
| HXR | 38X39 X-LONG |
| AMC | 39 |
| AMD | 39 LONG |
| AMK | 39 REGULAR |
| AML | 39 SHORT |
| CSH | 39 TO 42 X-LARGE |
| AMN | 39 X-LONG |
| AMQ | 39 X-SHORT |
| JMF | 39X25 |
| FMH | 39X27 |
| FMJ | 39X27 X-SHORT |
| FMK | 39X28 |
| FML | 39X28 X-SHORT |
| FMM | 39X29 |
| FMN | 39X29 SHORT |
| FMP | 39X30 |
| FMQ | 39X30 SHORT |
| HXS | 39X30 X-SHORT |
| FMR | 39X31 |
| FMS | 39X31 REGULAR |
| FMT | 39X32 |
| FMW | 39X32 REGULAR |
| HXT | 39X32 SHORT |
| FMX | 39X33 |
| FMY | 39X33 LONG |
| FMZ | 39X34 |
| HXW | 39X34 REGULAR |
| FNA | 39X35 |
| FNB | 39X35 X-LONG |
| GZZ | 39X36 |
| HXX | 39X36 LONG |
| HAA | 39X38 |
| AAE | 4 |
| KDK | 4 MISSES PETITE |
| KFS | 4 MISSES REGULAR |
| KDL | 4 MISSES TALL |
| BJR | 4 REGULAR |
| JPK | 4 SHORT |
| AMR | 40 |
| AMS | 40 LONG |
| AMZ | 40 REGULAR |
| ANA | 40 SHORT |
| EMD | 40 TO 42 MEDIUM |
| FNC | 40 TO 42 X-LARGE |
| FND | 40 TO 42 XX-LARGE |
| FNE | 40 TO 43 X-LARGE |
| FNF | 40 TO 48 X-LARGE |
| ANC | 40 X-LONG |
| ANE | 40 X-SHORT |
| JMG | 40X25 |
| FNG | 40X27 |
| FNH | 40X27 X-SHORT |
| FNJ | 40X28 |
| FNK | 40X28 X-SHORT |
| FNL | 40X29 |
| FNM | 40X29 SHORT |
| FNN | 40X30 |
| FNP | 40X30 SHORT |
| FNQ | 40X31 |
| FNR | 40X31 REGULAR |
| FNS | 40X32 |
| FNT | 40X32 REGULAR |
| FNW | 40X33 |
| FNX | 40X33 LONG |
| FNY | 40X34 |
| FNZ | 40X34 LONG |
| FPA | 40X35 |
| HXY | 40X35 REGULAR |
| FPB | 40X35 X-LONG |
| FPC | 40X36 |
| FPD | 40X36 XX-LONG |
| FPE | 40X37 |
| HXZ | 40X37 LONG |
| FPF | 40X37 XX-LONG |
| FPG | 40X38 |
| ANF | 41 |
| ANG | 41 LONG |
| ANM | 41 REGULAR |
| ANP | 41 SHORT |
| ANR | 41 X-LONG |
| ANS | 41 X-SHORT |
| FPH | 41X27 |
| FPJ | 41X29 |
| HAB | 41X30 |
| HYA | 41X30 X-SHORT |
| FPK | 41X31 |
| HAC | 41X32 |
| HYB | 41X32 SHORT |
| FPL | 41X33 |
| JPC | 41X35 |
| ANV | 42 |
| CXT | 42 LARGE |
| ANW | 42 LONG |
| APC | 42 REGULAR |
| APD | 42 SHORT |
| EHR | 42 SMALL |
| BDR | 42 TO 44 |
| CSJ | 42 TO 44 LARGE |
| HYC | 42 TO 44 LARGE LONG |
| HYD | 42 TO 44 LARGE REGULAR |
| HYE | 42 TO 44 LARGE SHORT |
| FPM | 42 TO 44 X-LARGE |
| FPN | 42 TO 45 X-LARGE |
| HYF | 42 TO 46 LARGE X-LARGE |
| APF | 42 X-LARGE |
| APG | 42 X-LONG |
| APH | 42 X-SHORT |
| FPP | 42X27 |
| FPQ | 42X28 |
| FPR | 42X29 |
| FPS | 42X29 SHORT |
| FPT | 42X30 |
| FPW | 42X30 SHORT |
| FPX | 42X31 |
| FPY | 42X31 REGULAR |
| FPZ | 42X32 |
| FQA | 42X32 REGULAR |
| FQB | 42X33 |
| FQC | 42X33 LONG |
| FQD | 42X34 |
| FQE | 42X34 LONG |
| FQF | 42X35 |
| HYG | 42X35 REGULAR |
| FQG | 42X35 X-LONG |
| FQH | 42X36 |
| FQJ | 42X36 XX-LONG |
| FQK | 42X37 |
| FQL | 42X37 XX-LONG |
| FQM | 42X38 |
| APJ | 43 |
| APK | 43 LONG |
| APP | 43 REGULAR |
| APQ | 43 SHORT |
| FQN | 43 TO 46 XX-LARGE |
| APS | 43 X-LONG |
| APV | 43 X-SHORT |
| JMH | 43X27 |
| FQP | 43X29 |
| FQQ | 43X31 |
| JMJ | 43X33 |
| APW | 44 |
| APX | 44 LONG |
| AQB | 44 REGULAR |
| AQC | 44 SHORT |
| EME | 44 TO 46 LARGE |
| FQR | 44 TO 47 XX-LARGE |
| HYH | 44 TO 48 LARGE X-LARGE |
| AQE | 44 X-LONG |
| AQF | 44 X-SHORT |
| FQS | 44 XX-LARGE |
| JPE | 44X25 |
| JMK | 44X27 |
| FQT | 44X28 |
| FQW | 44X29 |
| FQX | 44X30 |
| FQY | 44X31 |
| FQZ | 44X31 REGULAR |
| FRA | 44X32 |
| FRB | 44X32 REGULAR |
| FRC | 44X33 |
| FRD | 44X33 LONG |
| FRE | 44X34 |
| FRF | 44X34 LONG |
| FRG | 44X35 |
| HYJ | 44X35 REGULAR |
| FRH | 44X35 X-LONG |
| FRJ | 44X36 |
| FRK | 44X36 XX-LONG |
| FRL | 44X37 |
| FRM | 44X37 XX-LONG |
| FRN | 44X38 |
| AZH | 45 |
| AZJ | 45 LONG |
| AZN | 45 REGULAR |
| AZP | 45 SHORT |
| CSK | 45 TO 48 |
| AZR | 45 X-LONG |
| AZS | 45 X-SHORT |
| JML | 45X29 |
| JMM | 45X31 |
| JMN | 45X33 |
| AQG | 46 |
| AQH | 46 LONG |
| CWK | 46 MEDIUM |
| AQM | 46 REGULAR |
| AQN | 46 SHORT |
| BDS | 46 TO 48 |
| CSL | 46 TO 48 X-LARGE |
| FRP | 46 TO 48 XX-LARGE |
| HYK | 46 TO 50 LARGE |
| HYL | 46 X-LARGE LONG |
| HYM | 46 X-LARGE REGULAR |
| HYN | 46 X-LARGE SHORT |
| AQQ | 46 X-LONG |
| AQR | 46 X-SHORT |
| FRQ | 46 XX-LARGE |
| JPD | 46X27 |
| JNP | 46X29 |
| HAD | 46X31 |
| FRR | 46X33 |
| FRS | 46X33 LONG |
| FRT | 46X34 |
| FRW | 46X34 LONG |
| FRX | 46X35 |
| FRY | 46X35 X-LONG |
| HAE | 46X37 |
| GYP | 46X38 |
| AQS | 47 |
| FRZ | 47 TO 48 |
| JNQ | 47X29 |
| JNR | 47X31 |
| JMP | 47X33 |
| AQV | 48 |
| AQW | 48 LONG |
| ARA | 48 REGULAR |
| ARB | 48 SHORT |
| ARH | 48 TO 49 |
| EMF | 48 TO 50 X-LARGE |
| ARF | 48 X-LONG |
| ARG | 48 X-SHORT |
| FSX | 48 XX-LARGE |
| FSY | 48X28 |
| FSZ | 48X29 |
| FTA | 48X30 |
| FTB | 48X31 |
| FTC | 48X32 |
| FTD | 48X33 |
| FTE | 48X33 LONG |
| FTF | 48X34 |
| FTG | 48X34 LONG |
| FTH | 48X36 |
| HAF | 48X37 |
| FTJ | 48X38 |
| FTK | 49 |
| FTL | 49-1/2 |
| AAF | 5 |
| AAG | 5 JUNIOR |
| AAH | 5 LONG |
| JSJ | 5 LONG-PLUS |
| JLR | 5 PETITE |
| AAJ | 5 REGULAR |
| JPY | 5 REGULAR-PLUS |
| AAK | 5 SHORT |
| JPZ | 5 SHORT-PLUS |
| AAL | 5 X-SHORT |
| ARJ | 50 |
| EHS | 50 LARGE |
| ARL | 50 LONG |
| ARR | 50 REGULAR |
| ARS | 50 SHORT |
| FTM | 50 TO 52 XXX-LARGE |
| ARW | 50 X-LONG |
| JPF | 50X29 |
| GYQ | 50X33 |
| HAG | 50X37 |
| GYR | 50X38 |
| ARX | 52 |
| ARY | 52 LONG |
| ASC | 52 REGULAR |
| ASD | 52 SHORT |
| ASG | 52 TO 53 |
| ASF | 52 X-LONG |
| ASJ | 54 |
| ASV | 54 X-LARGE |
| EHT | 58 XX-LARGE |
| AAM | 6 |
| AAN | 6 LONG |
| EPM | 6 LONG-AVERAGE |
| EPN | 6 LONG-REGULAR |
| AAP | 6 MISSES |
| KDM | 6 MISSES PETITE |
| KFT | 6 MISSES REGULAR |
| KDN | 6 MISSES TALL |
| AAQ | 6 REGULAR |
| EPP | 6 REGULAR-AVERAGE |
| EPQ | 6 REGULAR-PLUS |
| AAR | 6 SHORT |
| EPR | 6 SHORT-AVERAGE |
| EPS | 6 SHORT-PLUS |
| KBE | 6 TO 10 X-SMALL |
| KDP | 6 WOMENS PETITE |
| KDQ | 6 WOMENS REGULAR |
| KDR | 6 WOMENS TALL |
| EPT | 6 X-LONG |
| AAS | 6 X-SHORT |
| EPW | 6 X-SHORT AVERAGE |
| EPX | 6 X-SHORT MINUS |
| AVQ | 6-1/2 |
| KKV | 65 TO 75 |
| FFB | 68 |
| KBW | 68 LONG |
| KBV | 68 REGULAR |
| KBU | 68 SHORT |
| GTJ | 6X26 SHORT |
| GTK | 6X27 REGULAR |
| GTL | 6X27 SHORT |
| GTM | 6X28 LONG |
| GTN | 6X28 REGULAR |
| GTP | 6X29 LONG |
| AAT | 7 |
| AAU | 7 JUNIOR |
| AAV | 7 LONG |
| JQA | 7 LONG-PLUS |
| JLT | 7 PETITE |
| AAW | 7 REGULAR |
| JQB | 7 REGULAR-PLUS |
| AAX | 7 SHORT |
| JQC | 7 SHORT-PLUS |
| AAY | 7 X-SHORT |
| FFC | 71 |
| KBX | 72 |
| KKW | 75 TO 85 |
| JVH | 76 |
| KBZ | 76 LONG |
| JZT | 76 REGULAR |
| KBY | 76 SHORT |
| CPG | 78 MEDIUM |
| CPF | 78 SHORT |
| AAZ | 8 |
| ABA | 8 LONG |
| EPY | 8 LONG-AVERAGE |
| JQD | 8 LONG-PLUS |
| KDS | 8 MISSES PETITE |
| KFU | 8 MISSES REGULAR |
| KDT | 8 MISSES TALL |
| ABC | 8 REGULAR |
| EPZ | 8 REGULAR-AVERAGE |
| ABD | 8 REGULAR-PLUS |
| ABE | 8 SHORT |
| EQA | 8 SHORT-AVERAGE |
| ABF | 8 SHORT-PLUS |
| HSC | 8 TO 10 SMALL LONG |
| HSD | 8 TO 10 SMALL REGULAR |
| HSE | 8 TO 10 SMALL SHORT |
| KDU | 8 WOMENS PETITE |
| KDV | 8 WOMENS REGULAR |
| KDW | 8 WOMENS TALL |
| EQB | 8 X-LONG |
| ABG | 8 X-SHORT |
| EQC | 8 X-SHORT AVERAGE |
| EQD | 8 X-SMALL |
| KCB | 80 LONG |
| FWA | 80 REGULAR |
| KCA | 80 SHORT |
| KKX | 80 TO 90 |
| ABH | 8-1/2 |
| JWB | 84 |
| GLM | 84 SHORT |
| KKY | 85 TO 95 |
| CNR | 86 SHORT |
| JFF | 88 |
| KCF | 88 LONG |
| KCE | 88 REGULAR |
| KCD | 88 SHORT |
| KCG | 88 X-LONG |
| KCC | 88 X-SHORT |
| GTQ | 8X26 SHORT |
| GTR | 8X27 REGULAR |
| GTS | 8X27 SHORT |
| GTT | 8X28 LONG |
| GTW | 8X28 REGULAR |
| GTX | 8X28 SHORT |
| GTY | 8X29 LONG |
| GTZ | 8X29 REGULAR |
| GWA | 8X30 LONG |
| JNA | 8X31 X-LONG |
| ABL | 9 LONG |
| JQE | 9 LONG-PLUS |
| JLW | 9 PETITE |
| ABM | 9 REGULAR |
| JQF | 9 REGULAR-PLUS |
| ABN | 9 SHORT |
| JQG | 9 SHORT-PLUS |
| KKZ | 90 TO 100 |
| KLB | 90 TO 110 |
| JKP | 92 |
| KCJ | 92 X-LONG |
| KCH | 92 X-SHORT |
| GMT | 95 |
| KLA | 95 TO 105 |
| JVM | 96 |
| JYV | 96 LONG |
| JYW | 96 PORTLY |
| JYX | 96 REGULAR |
| JZY | 96 SHORT |
| JZZ | 96 X-LONG |
| KAA | 96 X-SHORT |
| GMW | 97 CORPULENT |
| GMX | 97 LONG |
| GMY | 97 PORTLY |
| GMZ | 97 REGULAR |
| GNA | 97 SHORT |
| GNB | 97 SLIM |
| GNC | 97 STOUT |
| JKW | 98 |
| CNL | 98 LONG |
| FWD | 98 REGULAR |
| CNK | 98 SHORT |
| CNM | 98 X-LONG |
| GNE | 99 LONG |
| GNF | 99 PORTLY |
| GNG | 99 REGULAR |
| A | ANY ACCEPTABLE |
| ATJ | LARGE |
| ATK | LARGE LONG |
| ATL | LARGE REGULAR |
| ATM | LARGE SHORT |
| FTN | LARGE SHORT REGULAR |
| ECB | LARGE X-LONG |
| FTP | LARGE X-SHORT |
| HYP | LARGE XX-LONG |
| AXC | LONG |
| ATN | MEDIUM |
| ATP | MEDIUM LONG |
| ATQ | MEDIUM REGULAR |
| ATR | MEDIUM SHORT |
| FTQ | MEDIUM SHORT REGULAR |
| ECC | MEDIUM X-LONG |
| FTR | MEDIUM X-SHORT |
| CPS | MEDIUM XX-LONG |
| AXD | REGULAR |
| HYQ | REGULAR XX-LONG |
| AXF | SHORT |
| FTS | SHORT REGULAR |
| ATS | SMALL |
| ATT | SMALL LONG |
| ATV | SMALL REGULAR |
| ATW | SMALL SHORT |
| FTT | SMALL SHORT REGULAR |
| ECD | SMALL X-LONG |
| FTW | SMALL X-SHORT |
| CPR | SMALL XX-LONG |
| ATX | UNIVERSAL |
| ATY | X-LARGE |
| ATZ | X-LARGE LONG |
| AVB | X-LARGE REGULAR |
| AVC | X-LARGE SHORT |
| FTX | X-LARGE SHORT REGULAR |
| ECE | X-LARGE X-LONG |
| CPT | X-LARGE X-SHORT |
| EJX | X-LARGE XX-LONG |
| BCN | X-LONG |
| CKM | X-SHORT |
| AVD | X-SMALL |
| AVF | X-SMALL LONG |
| AVG | X-SMALL REGULAR |
| AVH | X-SMALL SHORT |
| FTY | X-SMALL SHORT REGULAR |
| ECF | X-SMALL X-LONG |
| FTZ | X-SMALL X-SHORT |
| CQB | X-SMALL XX-LONG |
| AVJ | XX-LARGE |
| AZT | XX-LARGE LONG |
| ECG | XX-LARGE REGULAR |
| ECH | XX-LARGE SHORT |
| ECJ | XX-LARGE X-LONG |
| CPU | XX-LARGE X-SHORT |
| CPV | XX-LARGE XX-LONG |
| AVK | XX-LONG |
| AVL | XX-SHORT |
| BCP | XX-SMALL |
| BCQ | XXX-LARGE |
| JMC | XXX-SMALL |
AJNN*DGARMENT CLOSING METHOD
THE MEANS BY WHICH THE PRINCIPAL OPENING OF THE GARMENT IS CLOSED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AJNN3CMFDAM*;AJNN3CMFDAM$DAE*;AJNN3CMFDAM$$DAE*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AUA | FRONT |
| 3CMF | WAIST |
| 3CUD | CENTER FRONT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AF69) | Reply |
| KL | ADHESIVE STRIP |
| A | ANY ACCEPTABLE |
| KM | BALL-SOCKET |
| AB | BUCKLE |
| AC | BUTTON |
| AD | DRAWCORD |
| LL | D-RING |
| AE | ELASTIC |
| BX | ELASTIC DRAWCORD |
| AF | ELASTIC INSERTS |
| AH | HOOK-EYE |
| AG | HOOK-PILE FASTENER TAPE |
| AJ | KNITTED |
| AK | LACING |
| BM | LOOP |
| AL | SLIDE FASTENER |
| AM | SLIDE FASTENER, QUICK RELEASE |
| AN | SNAP FASTENER |
| AP | SNAP HOOK-DEE RING |
| AQ | STRAP |
| NJ | TAB |
| BJ | TAB-BUTTON |
| AR | TIE BELT |
| AS | TIE TAPE |
AREG*DADJUSTMENT METHOD
THE MEANS PROVIDED TO ADJUST AN ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AREG3CMFDAFN*;AREG3CMFDAFN$DAFR*;AREG3CMFDAFN$$DAFR*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AUA | FRONT |
| 3CMF | WAIST |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AL41) | Reply |
| AFH | ADHESIVE STRIP |
| A | ANY ACCEPTABLE |
| AFJ | BALL-SOCKET |
| AFK | BUCKLE |
| AFZ | BUTTON |
| AFN | DRAWCORD |
| AEC | D-RING |
| AFP | ELASTIC |
| AFQ | ELASTIC DRAWCORD |
| AEW | ELASTIC INSERT |
| AFR | HOOK-EYE |
| AEN | HOOK-PILE FASTENER TAPE |
| AEL | LACING CORD |
| ABS | LOOP |
| AFY | RING |
| AEP | SLIDE FASTENER |
| AFL | SNAP FASTENER |
| AFS | STRAP |
| AFT | TAB-BUTTON |
| AFW | TIE-BELT |
| AFX | TIE-TAPE |
AJPL*DPOCKET TYPE
INDICATES THE TYPE OF POCKET BY THE STYLE OR DESIGN.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AJPL3CUEDAC*;AJPL3CUEDAC$DAE*;AJPL3CUEDAC$$DAE*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AUK | LEFT SIDE |
| 3AVB | RIGHT SIDE |
| 3CJP | RIGHT FRONT |
| 3CMJ | LEFT HIP |
| 3CMO | RIGHT HIP |
| 3CUE | LEFT THIGH |
| 3CUH | RIGHT THIGH |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AF87) | Reply |
| A | ANY ACCEPTABLE |
| AB | CARGO |
| AC | PATCH |
| AD | SIMULATED |
| AE | SLASH |
Reference NotesRefer to Reference Drawings for assitance in answering this MRC.
ADZC*DENVIRONMENTAL PROTECTION
THE ENVIRONMENTAL ELEMENTS OR CONDITIONS THAT AN ITEM IS DESIGNED OR PROTECTED TO RESIST OR WITHSTAND SATISFACTORILY.
Enter the applicable reply code from the table below
(ADZCDADF*;ADZCDAAP$$DACD*)
| Table 1 |
| Reply Code (AA65) | Reply |
| ABX | ABRASION RESISTANT |
| ABY | ACID RESISTANT |
| ABZ | ALCOHOL RESISTANT |
| ACA | AROMATIC HYDROCARBON FLUID RESISTANT |
| AAB | CHEMICAL RESISTANT |
| ACB | COLD RESISTANT |
| AAJ | FIRE RESISTANT |
| AAP | HEAT RESISTANT |
| ACC | MILDEW RESISTANT |
| ADP | MOTH RESISTANT |
| ACD | MOTHPROOF |
| AAX | OIL RESISTANT |
| ACE | SOIL RESISTANT |
| ADF | STATIC FREE |
| ACF | TOXICOLOGICAL AGENTS RESISTANT |
| ACG | VESICANT GAS RESISTANT |
| ACH | WATER REPELLENT |
| ABK | WATERPROOF |
| ABN | WEATHER RESISTANT |
| ACJ | WRINKLE RESISTANT |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDBDZ*;CBBLDCRR$$DBRE*)
| Table 1 |
| Reply Code (AN47) | Reply |
| BRJ | AIR DUMP VALVE |
| BDW | ATHLETIC SUPPORTER |
| BQH | BELL BOTTOM |
| BNA | BELT |
| BNB | BELT LOOPS |
| BRK | BLADDER |
| BQQ | BOOTS |
| BDX | BROADFALL FRONT |
| BQR | BUOYANCY CHAMBER |
| BQS | DETACHABLE POCKETS |
| BQT | DROP SEATS |
| BQW | ELBOW PADS |
| DLW | ELBOW PATCHES |
| EUT | FACE PIECE |
| BDY | FLARED |
| AEA | FLUORESCENT FEATURE |
| CEZ | FLY FRONT |
| BQX | FULL PROTECTION |
| BQY | GLOVES |
| BQJ | GOLD BRAID W/RED CENTER STRIPE |
| DLX | HIGH BACK RISER HORIZONTALLY QUILTED |
| BDZ | HIP PADS |
| BQZ | HOOD |
| BEA | INFRARED REFLECTANCE |
| BEB | KIDNEY PADS |
| BEC | KNEE PADS |
| BED | KNEE PATCHES |
| BRA | KNIT WRISTLETS |
| BRB | LEG SEALS |
| BRC | LIMITED PROTECTION |
| AEL | LINER |
| AET | LINT FREE |
| BRD | MITTENS |
| CRP | PERMANENT PRESS |
| BBY | POCKET FLAP |
| BEE | POCKET TIE TAPES |
| AEM | PROTECTIVE FLAP |
| BRE | RETRIEVAL STRAP |
| BRF | SAFETY BELT |
| BEF | SEAT PATCHES |
| CRQ | SHOULDER TAB |
| BEG | SIDE PASS THROUGH |
| CRR | SLEEVE TAB |
| CZH | SNAP-ON |
| BRG | SOCKS |
| AEE | STATIC ELECTRICITY REDUCING FEATURE |
| CJB | STRAIGHT LEGS |
| BEH | SUSPENDERS |
| BEJ | THIGH PADS |
| BEK | THIGH PASS THROUGH |
| DLY | V-NOTCH LEG SEAM |
| BQL | W/GOLD BRAID |
| AXE | W/OPEN COLLECTOR OUTPUTS |
| BRH | WRIST SEALS |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
PGCD*APROCUREMENT GROUP CODE
A FIVE DIGIT NUMERIC CODE USED TO GROUP INDIVIDUAL SIZES OF A STANDARD GENERIC ITEM.
Enter the numeric reply with five digit(s) exactly.
(PGCDA11111)
SSEQ*ASIZE SEQUENCE INDICATOR
A THREE DIGIT NUMERIC CODE USED FOR SEQUENCING ITEMS IN ASCENDING SIZE ORDER FROM SMALLEST TO LARGEST SIZE. - MRC WAS CANCELED BECAUSE THE MRC DOES NOT MAKE SENSE, IT WAS NOT REPLACED AS NO ONE UNDERSTANDS THIS MRC AND WHAT THE CODED REPLIES EQUATE TO.
Enter the numeric reply with three digit(s) exactly.
(SSEQA111)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCN2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
| CF | CUBIC FEET |
| CN | CUBIC INCHES |
| CM | CUBIC METERS |
AJAF*JUNPACKAGED UNIT LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING, IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAFJAB2.0*;AJAFJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJAG*JUNPACKAGED UNIT WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAGJAB2.0*;AJAGJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJAH*JUNPACKAGED UNIT HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAHJAC2.0*;AJAHJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAA2.0*;ABMKJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAA2.0*;ABHPJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAC2.0*;ABKWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJQA*DGARMENT WEIGHT DESIGNATOR
A DESIGNATION INDICATING THE HEAVINESS OF THE GARMENT. PLEASE USE MRC APWG WITH USE OF ISAC IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable reply code from the table below
(AJQADAAG*;AJQADAAF$DN*)
| Table 1 |
| Reply Code (AF07) | Reply |
| AAF | HEAVY |
| AAG | LIGHT |
| AAH | MEDIUM |
| N | NOT RATED |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDRTA000*;PRMTDAGA000$DIRA000*;PRMTDAGA000$$DIRA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJAZA000R2.0*;PMWTJAZA000R2.0$$JAZA000R2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJRTA0002.0*;PMLCJRTA0002.0$JRTA0002.0*;PMLCJRTA0002.0$$JRTA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ042*;HZRDDHAZ003$$DHAZ042*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ003 | ALUMINUM POWDER |
| HAZ042 | ASBESTOS |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)