An item which indicates wind direction and speed from intelligence transmitted by associated transmitters.

FSC Information

6660	Meteorological Instruments and Apparatus

Colloquial Information

No Colloquials assigned to this Approve Item Name at this time

Change List

ISAC Reply 3AEE added to MRC BNHZ.

ISAC Reply 3EPT added to MRC BNHZ.

ISAC Reply 3EPY added to MRC BNHZ.

ISAC Reply 3HOU added to MRC BNHZ.

ISAC Reply 2AA deleted from MRC BNHZ.

ISAC Reply 2AB deleted from MRC BNHZ.

ISAC Reply 2AC deleted from MRC BNHZ.

ISAC Reply 2AD deleted from MRC BNHZ.

ISAC Reply 2AX deleted from MRC BNHZ.

ISAC Reply 2AY deleted from MRC BNHZ.

ISAC Reply 2BA deleted from MRC BNHZ.

ISAC Reply 2BB deleted from MRC BNHZ.

ISAC Reply 2BC deleted from MRC BNHZ.

ISAC Reply 2BD deleted from MRC BNHZ.

ISAC Reply 2BX deleted from MRC BNHZ.

ISAC Reply 2BY deleted from MRC BNHZ.

ISAC Reply 2CA deleted from MRC BNHZ.

ISAC Reply 2CB deleted from MRC BNHZ.

ISAC Reply 2CC deleted from MRC BNHZ.

ISAC Reply 2CD deleted from MRC BNHZ.

ISAC Reply 2CX deleted from MRC BNHZ.

ISAC Reply 2CY deleted from MRC BNHZ.

ISAC Reply 2DA deleted from MRC BNHZ.

ISAC Reply 2DB deleted from MRC BNHZ.

ISAC Reply 2DC deleted from MRC BNHZ.

ISAC Reply 2DD deleted from MRC BNHZ.

ISAC Reply 2DX deleted from MRC BNHZ.

ISAC Reply 2DY deleted from MRC BNHZ.

ISAC Reply 3AEE added to MRC APSK.

ISAC Reply 3EPS added to MRC APSK.

ISAC Reply 3EPT added to MRC APSK.

ISAC Reply 3EPU added to MRC APSK.

ISAC Reply 3EPY added to MRC APSK.

ISAC Reply 3HOU added to MRC APSK.

ISAC Reply 2AA deleted from MRC APSK.

ISAC Reply 2AB deleted from MRC APSK.

ISAC Reply 2AC deleted from MRC APSK.

ISAC Reply 2AD deleted from MRC APSK.

ISAC Reply 2AX deleted from MRC APSK.

ISAC Reply 2AY deleted from MRC APSK.

ISAC Reply 2BA deleted from MRC APSK.

ISAC Reply 2BB deleted from MRC APSK.

ISAC Reply 2BC deleted from MRC APSK.

ISAC Reply 2BD deleted from MRC APSK.

ISAC Reply 2BX deleted from MRC APSK.

ISAC Reply 2BY deleted from MRC APSK.

ISAC Reply 2CA deleted from MRC APSK.

ISAC Reply 2CB deleted from MRC APSK.

ISAC Reply 2CC deleted from MRC APSK.

ISAC Reply 2CD deleted from MRC APSK.

ISAC Reply 2CX deleted from MRC APSK.

ISAC Reply 2CY deleted from MRC APSK.

ISAC Reply 2DA deleted from MRC APSK.

ISAC Reply 2DB deleted from MRC APSK.

ISAC Reply 2DC deleted from MRC APSK.

ISAC Reply 2DD deleted from MRC APSK.

ISAC Reply 2DX deleted from MRC APSK.

ISAC Reply 2DY deleted from MRC APSK.

ISAC Reply 3AEE added to MRC ASST.

ISAC Reply 3EQH added to MRC ASST.

ISAC Reply 3EQI added to MRC ASST.

ISAC Reply 3EQK added to MRC ASST.

ISAC Reply 3HOU added to MRC ASST.

ISAC Reply 1A deleted from MRC ASST.

ISAC Reply 1B deleted from MRC ASST.

ISAC Reply 1C deleted from MRC ASST.

ISAC Reply 1D deleted from MRC ASST.

ISAC Reply 1F deleted from MRC ASST.

ISAC Reply 1G deleted from MRC ASST.

ISAC Reply 1H deleted from MRC ASST.

ISAC Reply 1J deleted from MRC ASST.

MRC SCMA has been added

MRC SMTP has been added

MRC ABFN has been deleted

MRC HUES has been deleted

NAMEDITEM NAME

NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.

Enter the item name code.

(NAMED01829*)

MATT*DMATERIAL

THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.

Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2

(MATT3CEPDWDE000*;MATT3CEPDWDE000$DBND000*;MATT3CEPDWDE000$$DBND000*)

Table 1
	ISAC Field Indicator (5000)	Location
	3CEP	CASE
	3HOU	LOCATION NOT OTHERWISE SPECIFIED

Table 2
	Reply Code (MA01)	Reply
	ALA000	ALUMINUM
	ALB000	ALUMINUM ALLOY
	AL5052	ALUMINUM ALLOY 5052
	AL7075	ALUMINUM ALLOY 7075
	BND000	BRONZE
	BNAAAA	BRONZE CAST
	CLD000	CERAMIC
	CRA000	CHROMIUM
	CRB000	CHROMIUM ALLOY
	CUA000	COPPER
	CUB000	COPPER ALLOY
	CCA000	COTTON
	FBA000	FIBER
	FG0000	FIBERGLASS
	GSA000	GLASS
	GSB000	GLASS FIBER
	RBR000	HARD RUBBER
	FEA000	IRON
	FEB000	IRON CAST
	LRA000	LEATHER
	LRE000	LEATHER ARTIFICIAL
	MGB000	MAGNESIUM ALLOY
	AYA000	MICA
	NLA000	NICKEL
	NLB000	NICKEL ALLOY
	PPA000	PAPER
	PCA000	PLASTIC
	PCD000	PLASTIC ACRYLIC
	PCJ000	PLASTIC MELAMINE
	PCCB00	PLASTIC NYLON
	PCM000	PLASTIC PHENOL-FORMALDEHYDE
	PCN000	PLASTIC PHENOLIC
	PCP000	PLASTIC POLYAMIDE (NYLON)
	PCR000	PLASTIC POLYCARBONATE
	PCW000	PLASTIC POLYESTER
	PCX000	PLASTIC POLYETHYLENE
	PCAC00	PLASTIC POLYPROPYLENE
	PCAE00	PLASTIC POLYSULFONE
	PCAK00	PLASTIC SILICONE
	PCBC00	PLASTIC STYRENE
	CLB000	PORCELAIN
	STA000	STEEL
	ST0302	STEEL COMP 302
	ST0304	STEEL COMP 304
	ST0316	STEEL COMP 316
	STB000	STEEL CORROSION RESISTING
	AAA012	THERMOPLASTIC
	WDC000	WOOD
	WDL000	WOOD MAHOGANY
	WDR000	WOOD OAK
	WDE000	WOOD WALNUT
	ZNB000	ZINC
	ZNA000	ZINC ALLOY

ASKX*AELECTRICAL CONNECTION QUANTITY

THE NUMBER OF ELECTRICAL CONNECTIONS PROVIDED.

Enter the numeric reply with a minimum of one digit.

(ASKXA10*)

AMNL*DPRESENTATION TYPE

INDICATES THE TYPE OF PRESENTATION.

Enter the applicable reply code from the table below

(AMNLDBB*;AMNLDAN$$DBC*)

Table 1
	Reply Code (AJ15)	Reply
	AK	CATHODE RAY TUBE
	AM	COUNTER
	AN	DIAL
	BP	DIGITAL DISPLAY
	AQ	DRUM DIAL
	AS	ILLUMINATED WINDOW
	AT	INDICATOR LIGHT
	AX	METER
	BB	SYNCHRO MOTOR
	BC	WINDOW

BNHZ*JACCURACY RATING

AN INDICATION OF THE ACCURACY OF AN ITEM.

(BNHZ3AEEJAAH2.0*;BNHZ3AEEJAAH2.0$JAAH2.0*;BNHZ3AEEJAAH2.0$$JAAH2.1*)

Table 1
	ISAC Field Indicator (5000)	Location
	3AEE	OVERALL
	3EPT	FIRST INDICATOR ALL SCALES
	3EPY	SECOND INDICATOR ALL SCALES
	3HOU	LOCATION NOT OTHERWISE SPECIFIED

Table 2
	Reply Code (AJ40)	Reply
	BDH	ARC ANGLE IN DEGREES
	AAD	DEG CELSIUS
	AAE	DEG FAHRENHEIT
	BDK	DEGREE ANGULAR CALIBRATION RANGE
	BDL	DEGREE QUADRANTS
	ABD	FEET PER MINUTE
	BEM	KILOMETERS PER HOUR
	AAH	KNOTS
	AAJ	KNOTS PER HOUR
	BDW	MARKER
	BDX	MARKER DEGREE
	BEN	METERS PER SECOND
	BBF	MILES
	AAK	MILES PER HOUR
	AAM	PERCENT

APSK*JSCALE RANGE

AN INDICATION OF THE SCALE RANGE.

Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.

(APSK3EPUJHTM32.0/P50.0*;APSK3EPUJHTM32.0/P50.0$$JHT*;APSK3EPUJHTM32.0/P50.0$JHTM32.0/P50.0*)

Table 1
	ISAC Field Indicator (5000)	Location
	3AEE	OVERALL
	3EPS	FIRST INDICATOR SINGLE SCALE
	3EPT	FIRST INDICATOR ALL SCALES
	3EPU	FIRST INDICATOR FIRST SCALE
	3EPY	SECOND INDICATOR ALL SCALES
	3HOU	LOCATION NOT OTHERWISE SPECIFIED

Table 2
	Reply Code (AJ20)	Reply
	MG	COUNTER
	BM	DEG CELSIUS
	BN	DEG FAHRENHEIT
	AS	DEGREES
	HT	FEET PER MINUTE
	HX	FEET PER SECOND
	HN	KILOMETERS PER HOUR
	CS	KNOTS
	CT	KNOTS AIR SPEED
	CW	KNOTS PER HOUR
	DA	METERS
	JX	METERS PER SECOND
	DC	MILES
	DD	MILES PER HOUR
	DE	MILES PER HOUR AIR SPEED
	AX	PERCENT
	DW	PRESSURE
	NS	TEMPERATURE
	EC	UNITS

ASST*DPOINTER TYPE

INDICATES THE TYPE OF POINTER PROVIDED.

Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2

(ASST3EQHDAAM*;ASST3EQHDAAM$DAAB*;ASST3EQHDAAM$$DAAB*)

Table 1
	ISAC Field Indicator (5000)	Location
	3AEE	OVERALL
	3EQH	SINGLE POINTER
	3EQI	ALL POINTERS
	3EQK	SECOND POINTER
	3HOU	LOCATION NOT OTHERWISE SPECIFIED

Table 2
	Reply Code (AL97)	Reply
	AAB	CLOCK-HAND
	AAL	INDICATING
	AAM	REFERENCE

ASSR*GPOINTER PURPOSE

THE FUNCTION FOR WHICH THE POINTER IS INTENDED.

Enter clear text.

(ASSRGCLEARTEXT)

BFQN*DDISPLAY TYPE

INDICATES THE TYPE OF DISPLAY PROVIDED.

Enter the applicable reply code from the table below

(BFQNDFJW)

Table 1
	Reply Code (AK54)	Reply
	FJW	LIGHT EMITTING DIODE (L.E.D.).
	FJX	LIQUID CRYSTAL

BFQP*ADISPLAY DIGIT QUANTITY

THE NUMBER OF DIGITS DISPLAYED.

Enter the alpha-numeric reply with a minimum of one character.

(BFQPAG0)

ASKN*GINDIVIDUAL MARKING

AN INDICATION OF THE INDIVIDUAL MARKING ON THE ITEM.

Enter clear text.

(ASKNGCLEARTEXT)

ANBHDINFORMATION RECORDED

INDICATES THE TYPE OF INFORMATION THE ITEM WILL RECORD.

Enter the applicable reply code from the table below

(ANBHDAAA*;ANBHDAAM$$DAAN*)

Table 1
	Reply Code (AJ41)	Reply
	AAW	CROSS WIND-HEAD WIND
	AAA	TIME/DATE
	AAM	WIND DIRECTION
	AAN	WIND SPEED

IF STYLE/REPLY CODE(s) C WERE ENTERED FOR MRC ACDC, YOU MUST ANSWER MRC (ACYR)

IF STYLE/REPLY CODE(s) D WERE ENTERED FOR MRC ACDC, YOU MUST ANSWER MRC (ACYR and ACYN and FAAZ and ACZB)

IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC ACDC, YOU MUST ANSWER MRC (ACYN and FAAZ and ACZB)

ACDC*DCURRENT TYPE

INDICATES THE TYPE OF CURRENT WHETHER ALTERNATING,DIRECT,OR BOTH.

Enter the applicable reply code from the table below

(ACDCDB)

Table 1
	Reply Code (AB62)	Reply
	B	AC
	D	AC/DC
	C	DC

ACYR*JDC VOLTAGE RATING

THE VALUE,OR RANGE OF VALUES,OF DIRECT CURRENT POTENTIAL FOR WHICH THE ITEM IS RATED.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ACYRJVB2.0*;ACYRJVB2.0$$JVB2.1*)

Table 1
	Reply Code (AB63)	Reply
	K	KILOVOLTS
	L	MILLIVOLTS
	V	VOLTS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ACYN*JAC VOLTAGE RATING

THE VALUE,OR RANGE OF VALUES,OF ROOT MEAN SQUARE POTENTIAL FOR WHICH THE ITEM IS RATED.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ACYNJKA2.0*;ACYNJKA2.0$$JKA2.1*)

Table 1
	Reply Code (AB63)	Reply
	K	KILOVOLTS
	L	MILLIVOLTS
	V	VOLTS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

FAAZ*DPHASE

THE NUMBER OF ALTERNATING CURRENT PHASES.

Enter the applicable reply code from the table below

(FAAZDC*;FAAZDB$DA*)

Table 1
	Reply Code (AD02)	Reply
	A	SINGLE
	C	THREE
	B	TWO

ACZB*JFREQUENCY RATING

THE NUMBER OF COMPLETE CYCLIC CHANGES,PER UNIT OF TIME,FOR WHICH AN ITEM IS RATED.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ACZBJKB2.0*;ACZBJKB2.0$$JKB2.1*)

Table 1
	Reply Code (AC32)	Reply
	E	HERTZ
	K	KILOHERTZ

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

BDFT*JCOIL DC RESISTANCE

THE OPPOSITION THAT THE COIL OFFERS TO THE FLOW OF DIRECT CURRENT.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BDFTJQB2.0*;BDFTJQB2.0$$JQB2.1*)

Table 1
	Reply Code (AA57)	Reply
	Q	OHMS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

IF STYLE/REPLY CODE(s) ACQ WERE ENTERED FOR MRC AXHR, YOU MUST ANSWER MRC (ABTB)

AXHR*JMOUNTING FACILITY TYPE AND QUANTITY

INDICATES THE TYPE AND NUMBER OF FACILITIES BY WHICH THE ITEM IS MOUNTED.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.

(AXHRJBJY2*;AXHRJBJY2$$JBJY3*)

Table 1
	Reply Code (AM39)	Reply
	APY	BENCH
	BJY	BULKHEAD
	ABF	CASE
	BMW	CONSOLE
	AED	PANEL
	ASL	PEDESTAL
	ABR	RACK
	BYC	SHOCK MOUNT
	BCX	SLOTTED HOLE
	AKY	THREADED BEZEL
	ACQ	UNTHREADED HOLE

ABTB*JMOUNTING HOLE DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A MOUNTING HOLE,AND TERMINATES AT THE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABTBJAB2.0*;ABTBJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

IF STYLE/REPLY CODE(s) 1 WERE ENTERED FOR MRC ANRL, YOU MUST ANSWER MRC (AEJN)

IF STYLE/REPLY CODE(s) 2 WERE ENTERED FOR MRC ANRL, YOU MUST ANSWER MRC (ABKR and ABKQ and AFDT)

IF STYLE/REPLY CODE(s) 3, 8 OR 9 WERE ENTERED FOR MRC ANRL, YOU MUST ANSWER MRC (ABKR and ABKQ)

IF STYLE/REPLY CODE(s) 4 WERE ENTERED FOR MRC ANRL, YOU MUST ANSWER MRC (ABKR and ABKQ)

IF STYLE/REPLY CODE(s) 4 WERE ENTERED FOR MRC ANRL, YOU MUST ANSWER MRC (ABKR and ABKQ and AFDW)

IF STYLE/REPLY CODE(s) 5, 6 OR 7 WERE ENTERED FOR MRC ANRL, YOU MUST ANSWER MRC (AFFL)

ANRL*LMOUNTING ARRANGEMENT STYLE

THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE ARRANGEMENT OF THE MOUNTING.

Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.

(ANRLL3)

Table 1
Physical Drawing ID	Reply Code (STYL)	Reply
AAD1272	1	TWO HOLE/STUD
AAD1273	2	THREE HOLE/STUD TRIANGULAR
AAD1274	3	FOUR HOLE/STUD RECTANGULAR/SQUARE
AAD1275	4	SIX HOLE/STUD RECTANGULAR/SQUARE
AAD1276	5	THREE HOLE/STUD BOLT CIRCLE
AAD1277	6	FOUR HOLE/STUD BOLT CIRCLE
AAD1278	7	SIX HOLE/STUD BOLT CIRCLE
AAD1279	8	FOUR SLOT RECTANGULAR/SQUARE OPEN ENDS
AAD1280	9	FOUR SLOT RECTANGULAR/SQUARE

ABKQ*JCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH

THE DISTANCE BETWEEN THE CENTER OF ONE MOUNTING FACILITY AND THE CENTER OF THE ADJACENT MOUNTING FACILITY PARALLEL TO THE LENGTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABKQJAB2.0*;ABKQJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABKR*JCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH

THE DISTANCE BETWEEN THE CENTER OF ONE MOUNTING FACILITY AND THE CENTER OF THE ADJACENT MOUNTING FACILITY PARALLEL TO THE WIDTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABKRJAC2.0*;ABKRJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AEJN*JDISTANCE BETWEEN MOUNTING FACILITY CENTERS

THE DISTANCE BETWEEN MOUNTING FACILITY CENTERS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AEJNJAB2.0*;AEJNJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AFDT*JSHORTEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS

THE SHORTEST DISTANCE BETWEEN MOUNTING CENTERS PARALLEL TO THE HORIZONTAL PLANE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AFDTJAB2.0*;AFDTJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AFDW*JSHORTEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS

THE SHORTEST DISTANCE BETWEEN MOUNTING CENTERS PARALLEL TO THE VERTICAL PLANE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AFDWJAC2.0*;AFDWJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AFFL*JMOUNTING BOLT CIRCLE DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A MOUNTING BOLT CIRCLE,AND TERMINATES AT THE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AFFLJAB2.0*;AFFLJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABRY*JLENGTH

A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABRYJAC2.0*;ABRYJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABGL*JWIDTH

A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABGLJAB2.0*;ABGLJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABMZ*JDIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABMZJAC2.0*;ABMZJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

HGTH*JHEIGHT

A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN OBJECT,IN DISTINCTION FROM DEPTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(HGTHJAB2.0*;HGTHJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AEJZ*JDEPTH

A LINEAR MEASUREMENT FROM THE SURFACE TO A SPECIFIED INNER POINT ON AN ITEM,IN DISTINCTION FROM HEIGHT.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AEJZJAC2.0*;AEJZJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CXQH*JDIAL OUTSIDE DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE DIAL,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CXQHJAA2.0*;CXQHJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

FEAT*GSPECIAL FEATURES

THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.

Enter the reply in clear text. Separate multiple replies with a semicolon.

(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	Reply Code (AN62)	Reply
	V	FEDERAL MOTOR VEHICLE SAFETY STANDARD
	F	FLAMMABILITY STANDARD
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	U	INTERNATIONAL STD/SPEC
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	B	NATIONAL STD/SPEC
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	BE	ANNEALED
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BF	BOND
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CF	CIRCUMFERENCE
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	AV	CONFIGURATION
	CS	CONSTRUCTION
	BG	CORE CONDITION
	CB	CUT OFF
	AM	DELAY CLASS
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	DU	DUPLEX
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	AK	FILE NUMBER
	FN	FINISH
	FB	FLAVOR
	BH	FLUX PERCENTAGE
	FM	FORM
	FA	FORMULA
	AJ	GAGE STOCK NUMBER
	GR	GRADE
	GA	GRADUATION
	AX	GRANULES
	AY	GRIT
	GB	GROUND
	GP	GROUP
	HA	HEAVY DUTY
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LV	LEVEL
	LT	LIMIT
	MK	MARK
	AA	MARKER
	AD	MASK APERTURE
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	TA	MEDIUM TEMPER
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	AQ	NATURAL
	AU	NON-DELAY CLASS
	NR	NUMBER
	BL	OUTFIT NUMBER
	PA	PARAGRAPH
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	PD	POLISHED
	PB	PRESSURE RATING
	QA	QUALITY
	QB	QUENCHED
	RN	RANGE
	AE	RAPID
	RT	RATING
	RF	REFERENCE NUMBER
	RA	REGULAR DUTY
	BJ	RMA FLUX
	SJ	SALIENT CHARACTERISTICS
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	BD	SERIALIZED
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	AG	SLOW
	TC	SOFT TEMPER
	SK	SOURCE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	AW	STANDARD
	SR	STRAIGHT
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	BK	SUPPORT
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	AZ	UNSERIALIZED
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH