A man-carrying parachute attached to the person, which has the pack placed at the wearer's chest, and is opened at will after the jump has been initiated.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED00974*)
ALCFDCANOPY COLOR
THE HUE OR TINT OF THE CANOPY.
Enter the applicable reply code from the table below
(ALCFDBU0081*;ALCFDGR0283$DMS0021*;ALCFDGR0283$$DMS0021*)
| Table 1 |
| Reply Code (AD06) | Reply |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BU0082 | BLUE, 1157 |
| BU0081 | BLUE, 157 |
| BU0026 | BLUE, LIGHT |
| MS0066 | CAMOUFLAGE |
| MS0021 | ECRU |
| MS0067 | FOLIAGE |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0011 | GREEN, OLIVE |
| GR0062 | GREEN, OLIVE, 106 |
| GR0063 | GREEN, OLIVE, 107 |
| GR0007 | GREEN, SAGE |
| GR0064 | GREEN, SAGE, 1531 |
| GR0283 | GREEN, SAGE, 1535 |
| GR0038 | GREEN, SEA |
| NA0000 | NATURAL |
| NE0000 | NEUTRAL |
| LD0000 | OLIVE DRAB |
| LD0009 | OLIVE DRAB, 107 |
| LD0010 | OLIVE DRAB, 613 |
| LD0012 | OLIVE DRAB, US ARMY, 7 |
| RG0000 | ORANGE |
| MS0265 | ORANGE ON WHITE |
| RG0009 | ORANGE, INTERNATIONAL |
| RG0001 | ORANGE-RED |
| RG0002 | ORANGE-YELLOW |
| RE0000 | RED |
| MS0049 | SAND |
| MS0062 | SAND, DESERT |
| RE0022 | SCARLET |
| TA0000 | TAN |
| WH0000 | WHITE |
| WH0023 | WHITE, NATURAL |
| YE0000 | YELLOW |
| YE0034 | YELLOW, 1365 |
ALCKACANOPY QUANTITY
THE NUMBER OF CANOPIES INCLUDED.
Enter the numeric reply with a minimum of one digit.
(ALCKA10*)
ALCLDCANOPY SHAPE
THE PHYSICAL CONFIGURATION OF THE CANOPY.
Enter the applicable reply code from the table below
(ALCLDCZ)
| Table 1 |
| Reply Code (AD07) | Reply |
| BHY | BI-CONICAL |
| CR | CIRCULAR |
| CM | CIRCULAR RIBBON TYPE |
| CN | CONICAL |
| CP | CONICAL RING SLOT |
| AN | CYLINDRICAL |
| FL | FLAT |
| CX | FLAT CIRCULAR |
| CZ | FLAT CIRCULAR RING SLOT |
| CQ | FLAT OCTAGONAL |
| CS | FLAT POLYGON |
| BB | FLATTED ROUND |
| CT | OCTAGONAL |
| PA | PARABOLIC |
| CW | POLYGON |
| RT | RECTANGULAR |
| SQ | SQUARE |
ALCNDCANOPY OPENING METHOD
THE MEANS EMPLOYED FOR OPENING THE CANOPY.
Enter the applicable reply code from the table below
(ALCNDAZ*;ALCNDAN$DAJ*;ALCNDAN$$DAJ*)
| Table 1 |
| Reply Code (AH25) | Reply |
| AB | AIR RESISTANCE |
| AC | AIR TURBULENCE |
| AD | ANEROID RELEASE OF PILOT CHUTE |
| AE | ANEROID RELEASE OF RIPCORD |
| AK | AUTOMATIC RELEASE |
| AF | AUTOMATICALLY BY CABLE ASSEMBLY |
| AG | AUTOMATICALLY BY DEPLOYMENT GUN |
| BN | AUTOMATICALLY BY FUEL CONSUMPTION |
| AH | AUTOMATICALLY BY RIPCORD |
| AJ | AUTOMATICALLY BY STATIC LINE |
| AL | BALLISTICALLY DEPLOYED |
| AM | BREAKING TYPE STATIC LINE |
| BQ | BRIDLE |
| BR | BUNGEE |
| AN | BURSTING OF SOUND BALLOON BELOW |
| AP | DEPLOYMENT WEIGHT |
| AQ | EXTRACTION CHUTE |
| AR | EXTRACTION FORCE TRANSFER |
| AS | EXTRACTION PARACHUTE ASSEMBLY MECHANICAL RELEASE |
| AT | FALLING OUT INTO AIRCRAFT SLIPSTREAM |
| AX | MANUAL RIPCORD OVERRIDE |
| AW | MANUALLY BY RIPCORD |
| AY | PENDULUM EXTRACTION SYSTEM |
| AZ | PILOT CHUTE |
| BP | RADIO CONTROL |
| BA | RIPCORD |
| BB | SMALLER PARACHUTE |
| BC | SPRING LOADED BUNGEE |
| BD | STATIC LINE |
ALCPDPACK COLOR
THE HUE OR TINT OF THE PACK.
Enter the applicable reply code from the table below
(ALCPDRG0002*;ALCPDRE0022$DMS0049*;ALCPDRE0022$$DMS0049*)
| Table 1 |
| Reply Code (AD06) | Reply |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BU0082 | BLUE, 1157 |
| BU0081 | BLUE, 157 |
| BU0026 | BLUE, LIGHT |
| MS0066 | CAMOUFLAGE |
| MS0021 | ECRU |
| MS0067 | FOLIAGE |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0011 | GREEN, OLIVE |
| GR0062 | GREEN, OLIVE, 106 |
| GR0063 | GREEN, OLIVE, 107 |
| GR0007 | GREEN, SAGE |
| GR0064 | GREEN, SAGE, 1531 |
| GR0283 | GREEN, SAGE, 1535 |
| GR0038 | GREEN, SEA |
| NA0000 | NATURAL |
| NE0000 | NEUTRAL |
| LD0000 | OLIVE DRAB |
| LD0009 | OLIVE DRAB, 107 |
| LD0010 | OLIVE DRAB, 613 |
| LD0012 | OLIVE DRAB, US ARMY, 7 |
| RG0000 | ORANGE |
| RG0009 | ORANGE, INTERNATIONAL |
| RG0001 | ORANGE-RED |
| RG0002 | ORANGE-YELLOW |
| RE0000 | RED |
| MS0049 | SAND |
| MS0062 | SAND, DESERT |
| RE0022 | SCARLET |
| TA0000 | TAN |
| WH0000 | WHITE |
| WH0023 | WHITE, NATURAL |
| YE0000 | YELLOW |
| YE0034 | YELLOW, 1365 |
ALCRDPACK TYPE
INDICATES TYE TYPE OF ENCLOSURE IN WHICH THE ITEM IS PACKED.
Enter the applicable reply code from the table below
(ALCRDAZ)
| Table 1 |
| Reply Code (AH26) | Reply |
| AB | ATTACHABLE BACK |
| AC | ATTACHABLE CHEST |
| AD | ATTACHABLE SEAT |
| AE | ATTACHED BACK |
| AF | ATTACHED CHEST |
| AG | ATTACHED SEAT |
| AH | BACK |
| AJ | BACK INTEGRATED |
| AK | CHEST |
| AL | DUAL CANOPY RELEASE |
| AM | ESCAPE CAPSULE SYSTEM, AIRCRAFT |
| AN | INTEGRATED |
| AP | QUICK ATTACHABLE CHEST |
| AQ | QUICK FIT |
| AR | QUICK RELEASE |
| AS | SEAT |
| AT | SPECIAL BACK |
| AW | SPECIAL CHEST |
| AX | SPECIAL SEAT |
| AY | STANDARD |
| AZ | STANDARD BACK |
| BA | STANDARD CHEST |
| BB | STANDARD RELEASE ASSEMBLY |
| BC | STANDARD SEAT |
ALEP*JCANOPY DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CANOPY HAVING A SHAPE OTHER THAN RECTANGULAR OR SQUARE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ALEPJFB2.0*;ALEPJFB2.0$$JFB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| M | METERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ALER*JCANOPY LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF A CANOPY,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ALERJFB2.0*;ALERJFB2.0$$JFB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| M | METERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ALEQ*JCANOPY WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF A CANOPY,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ALEQJFC2.0*;ALEQJFC2.0$$JFC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| M | METERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3HDFDPCP000*;MATT3HDFDPCP000$DCCA000*;MATT3HDFDPCP000$$DCCA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HDD | CANOPY |
| 3HDE | HARNESS |
| 3HDF | PACK |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| CCA000 | COTTON |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
ABRY*JLENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRYJAA2.0*;ABRYJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGL*JWIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGLJAA2.0*;ABGLJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMZ*JDIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMZJAA2.0*;ABMZJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
HGTH*JHEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN OBJECT,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(HGTHJAB2.0*;HGTHJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ALDADHARNESS COLOR
THE HUE OR TINT OF THE HARNESS.
Enter the applicable reply code from the table below
(ALDADBU0082*;ALDADMS0067$DYE0034*)
| Table 1 |
| Reply Code (AD06) | Reply |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BU0082 | BLUE, 1157 |
| BU0081 | BLUE, 157 |
| BU0026 | BLUE, LIGHT |
| MS0066 | CAMOUFLAGE |
| MS0021 | ECRU |
| MS0067 | FOLIAGE |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0011 | GREEN, OLIVE |
| GR0062 | GREEN, OLIVE, 106 |
| GR0063 | GREEN, OLIVE, 107 |
| GR0007 | GREEN, SAGE |
| GR0064 | GREEN, SAGE, 1531 |
| GR0283 | GREEN, SAGE, 1535 |
| GR0038 | GREEN, SEA |
| NA0000 | NATURAL |
| NE0000 | NEUTRAL |
| LD0000 | OLIVE DRAB |
| LD0009 | OLIVE DRAB, 107 |
| LD0010 | OLIVE DRAB, 613 |
| LD0012 | OLIVE DRAB, US ARMY, 7 |
| RG0000 | ORANGE |
| RG0009 | ORANGE, INTERNATIONAL |
| RG0001 | ORANGE-RED |
| RG0002 | ORANGE-YELLOW |
| RE0000 | RED |
| MS0049 | SAND |
| MS0062 | SAND, DESERT |
| RE0022 | SCARLET |
| TA0000 | TAN |
| WH0000 | WHITE |
| WH0023 | WHITE, NATURAL |
| YE0000 | YELLOW |
| YE0034 | YELLOW, 1365 |
ALDBDHARNESS TYPE
INDICATES THE TYPE OF HARNESS FURNISHED.
Enter the applicable reply code from the table below
(ALDBDAE)
| Table 1 |
| Reply Code (AH26) | Reply |
| AB | ATTACHABLE BACK |
| AC | ATTACHABLE CHEST |
| AD | ATTACHABLE SEAT |
| AE | ATTACHED BACK |
| AF | ATTACHED CHEST |
| AG | ATTACHED SEAT |
| AH | BACK |
| AJ | BACK INTEGRATED |
| AK | CHEST |
| AL | DUAL CANOPY RELEASE |
| AM | ESCAPE CAPSULE SYSTEM, AIRCRAFT |
| AN | INTEGRATED |
| AP | QUICK ATTACHABLE CHEST |
| AQ | QUICK FIT |
| AR | QUICK RELEASE |
| AS | SEAT |
| AT | SPECIAL BACK |
| AW | SPECIAL CHEST |
| AX | SPECIAL SEAT |
| AY | STANDARD |
| AZ | STANDARD BACK |
| BA | STANDARD CHEST |
| BB | STANDARD RELEASE ASSEMBLY |
| BC | STANDARD SEAT |
ALDCAHARNESS MANUFACTURER CODE
THE IDENTIFYING NUMERIC CODE OF THE ORIGINATOR THAT CONTROLS OR MANUFACTURES THE HARNESS.
Enter the alpha-numeric reply with a minimum of one character.
(ALDCAM6)
ALDEAHARNESS MANUFACTURER PART NUMBER
THE IDENTIFYING PART NUMBER ASSIGNED TO THE HARNESS BY THE MANUFACTURER.
Enter the alpha-numeric reply with a minimum of one character.
(ALDEAE4)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
ALCD*GUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter clear text.
(ALCDGCLEARTEXT)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAO6)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAG5)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.
(NTRDA80-05-28*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information