An item consisting of a conductor or a system of conductors specifically designed to radiate and/or receive electromagnetic waves in free space. May include beam-forming devices, drive motors, synchros, radome, and associated mechanical structure.
ISAC Reply 3AEE added to MRC CSCF.
ISAC Reply 3DDV added to MRC CSCF.
ISAC Reply 3DDW added to MRC CSCF.
ISAC Reply 3DDX added to MRC CSCF.
ISAC Reply 3DDY added to MRC CSCF.
ISAC Reply 3DDZ added to MRC CSCF.
ISAC Reply 3DEA added to MRC CSCF.
ISAC Reply 3DEB added to MRC CSCF.
ISAC Reply 3DEC added to MRC CSCF.
ISAC Reply 3DED added to MRC CSCF.
ISAC Reply 3DEG added to MRC CSCF.
ISAC Reply 3DEJ added to MRC CSCF.
ISAC Reply 3DEL added to MRC CSCF.
ISAC Reply 3DEM added to MRC CSCF.
ISAC Reply 3HOU added to MRC CSCF.
ISAC Reply 1A deleted from MRC CSCF.
ISAC Reply 1B deleted from MRC CSCF.
ISAC Reply 1C deleted from MRC CSCF.
ISAC Reply 1D deleted from MRC CSCF.
ISAC Reply 1E deleted from MRC CSCF.
ISAC Reply 1F deleted from MRC CSCF.
ISAC Reply 1G deleted from MRC CSCF.
ISAC Reply 1H deleted from MRC CSCF.
ISAC Reply 1J deleted from MRC CSCF.
ISAC Reply 1K deleted from MRC CSCF.
ISAC Reply 1L deleted from MRC CSCF.
ISAC Reply 1M deleted from MRC CSCF.
ISAC Reply 1N deleted from MRC CSCF.
ISAC Reply 1P deleted from MRC CSCF.
ISAC Reply 1Q deleted from MRC CSCF.
ISAC Reply 1R deleted from MRC CSCF.
ISAC Reply 1S deleted from MRC CSCF.
ISAC Reply 1T deleted from MRC CSCF.
ISAC Reply 1X deleted from MRC CSCF.
ISAC Reply 1Z deleted from MRC CSCF.
ISAC Reply 3AEE added to MRC AJCV.
ISAC Reply 3DDV added to MRC AJCV.
ISAC Reply 3DEL added to MRC AJCV.
ISAC Reply 3DEM added to MRC AJCV.
ISAC Reply 3HOU added to MRC AJCV.
ISAC Reply 1A deleted from MRC AJCV.
ISAC Reply 1B deleted from MRC AJCV.
ISAC Reply 1C deleted from MRC AJCV.
ISAC Reply 1D deleted from MRC AJCV.
ISAC Reply 1E deleted from MRC AJCV.
ISAC Reply 1F deleted from MRC AJCV.
ISAC Reply 1G deleted from MRC AJCV.
ISAC Reply 1H deleted from MRC AJCV.
ISAC Reply 1J deleted from MRC AJCV.
ISAC Reply 1K deleted from MRC AJCV.
ISAC Reply 1L deleted from MRC AJCV.
ISAC Reply 1M deleted from MRC AJCV.
ISAC Reply 1N deleted from MRC AJCV.
ISAC Reply 1P deleted from MRC AJCV.
ISAC Reply 1Q deleted from MRC AJCV.
ISAC Reply 1R deleted from MRC AJCV.
ISAC Reply 1S deleted from MRC AJCV.
ISAC Reply 1T deleted from MRC AJCV.
ISAC Reply 1X deleted from MRC AJCV.
ISAC Reply 1Z deleted from MRC AJCV.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED00749*)
APGFDDESIGN TYPE
INDICATES THE DESIGN TYPE OF THE ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(APGF3DDWDFQF*;APGF3DDWDFQF$DFPC*;APGF3DDWDFQF$$DFPC*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DDV | FIRST ANTENNA |
| 3DDW | SECOND ANTENNA |
| 3DDX | THIRD ANTENNA |
| 3DDY | FOURTH ANTENNA |
| 3DDZ | FIFTH ANTENNA |
| 3DEA | SIXTH ANTENNA |
| 3DEB | SEVENTH ANTENNA |
| 3DEC | EIGHTH ANTENNA |
| 3DED | NINTH ANTENNA |
| 3DEG | TWELFTH ANTENNA |
| 3DEI | FOURTEENTH ANTENNA |
| 3DEJ | FIFTEENTH ANTENNA |
| 3DEL | ALL ANTENNAS |
| 3DEM | SINGLE ANTENNA ELEMENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AK54) | Reply |
| FMG | ADCOCK |
| FMH | AIRFOIL |
| FMJ | ANNULAR SLOT |
| FMK | ARRAY |
| FML | BALANCED LOOP |
| FMM | BEDSPRING ARRAY |
| FMN | BICONICAL |
| FMP | BILLBOARD |
| BBW | BLADE |
| FMQ | BOW TIE |
| CLC | BROADBAND |
| FMR | BROADSIDE ARRAY |
| ADS | CAGE |
| FMS | CASSEGRAIN |
| FMT | CAVITY SPIRAL |
| FMW | CHIREIX |
| FMX | CIRCULAR ARRAY |
| BUF | CIRCULAR FLAT PLATE |
| DTB | CLOVERLEAF |
| FMY | COAXIAL |
| FMZ | COAXIAL STUB |
| FNA | COLLINEAR |
| FNB | COLLINEAR ARRAY |
| ACQ | CONICAL |
| FNC | CONICAL HELIX |
| FND | CONICAL LOG SPIRAL |
| FNE | CONICAL SPIRAL |
| FNF | CORNER REFLECTOR |
| FNG | CROSSED LOOP |
| FNH | CROSSED PLANAR |
| FNJ | CYCLOID |
| FTA | CYLINDRICAL T-SHAPED |
| FNK | DIPOLE |
| FNL | DIPOLE ARRAY |
| FNM | DISCAGE |
| FNN | DISCONE |
| FRD | DOUBLE DOUBLET |
| FRE | DOUBLET |
| FRF | END FED WIRE |
| FNS | FOLDED COAXIAL |
| FNT | FOLDED DIPOLE |
| FNW | GLIDE SLOPE |
| FNX | GREGORIAN |
| FNY | GROUND PLANE |
| FNZ | HELICAL |
| FPA | HELICONE |
| FPB | HELIPOLE |
| FPC | HELIX |
| EFB | HORN |
| FPD | HORN W/LENS |
| AHK | HOURGLASS |
| FPE | HOURGLASS ARRAY |
| FPF | INVERTED HORN |
| FPG | KOOMAN |
| BKL | LENS |
| FPH | LINDERBLAD |
| FPJ | LINEAR ARRAY |
| FPK | LOG PERIODIC |
| EZE | LOOP |
| FPL | LOOP ARRAY |
| FPM | LOOP STICK |
| FPN | LUNEBURG LENS |
| FPP | MAST |
| FPQ | MONOPOLE |
| FPR | MONOPOLE BLADE |
| FPS | MULTIPLE HELIX |
| EYJ | NOTCH |
| FPT | PANCAKE LOOP |
| FPW | PARABOLIC |
| FPX | PARABOLIC REFLECTOR HORN |
| FPY | PARABOLOID |
| FPZ | PERIODIC |
| FQA | PILLBOX |
| FQB | PLANAR ARRAY |
| FQC | RHOMBIC |
| BKH | RING |
| FQD | RING DIPOLE |
| FQE | ROBINSON |
| FQF | SCIMITAR |
| DKJ | SKIN |
| FQG | SLEEVE |
| FQH | SLEEVE STUD |
| BSA | SLOTTED |
| FQJ | SLOTTED ARRAY |
| FQK | SLOTTED BLADE |
| FQL | SPHERICAL ARRAY |
| DXK | SPIRAL |
| FQM | STACKED ARRAY |
| FQN | STACKED DIPOLE |
| FQP | STACKED RING |
| AMN | STRAIGHT |
| DCR | STUB |
| BZW | TAPERED |
| FQQ | TORUS |
| FQR | TRAVELING WAVE |
| FQS | TRUNCATED PARABOLOID |
| FQT | TURNSTILE |
| FQW | UDA ARRAY |
| FQX | UMBRELLA |
| ASD | VERTICAL |
| FQY | VOLUMETRIC ARRAY |
| FQZ | WHIP |
| BLW | WIRE |
| FRA | WIRE ARRAY |
| FRB | WULLENWEBER |
| FRC | YAGI ARRAY |
IF STYLE/REPLY CODE(s) C WERE ENTERED FOR MRC AJCU, YOU MUST ANSWER MRC (AJCV)
AJCUDRADIATION PATTERN
THE GRAPHICAL REPRESENTATION OF THE RADIATION PATTERN OF THE DEVICE AS A FUNCTION OF DIRECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AJCU3DEBDG*;AJCU3DEBDG$DC*;AJCU3DEBDG$$DC*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DDV | FIRST ANTENNA |
| 3DDW | SECOND ANTENNA |
| 3DDX | THIRD ANTENNA |
| 3DDY | FOURTH ANTENNA |
| 3DDZ | FIFTH ANTENNA |
| 3DEA | SIXTH ANTENNA |
| 3DEB | SEVENTH ANTENNA |
| 3DEC | EIGHTH ANTENNA |
| 3DED | NINTH ANTENNA |
| 3DEG | TWELFTH ANTENNA |
| 3DEI | FOURTEENTH ANTENNA |
| 3DEJ | FIFTEENTH ANTENNA |
| 3DEL | ALL ANTENNAS |
| 3DEM | SINGLE ANTENNA ELEMENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AE78) | Reply |
| D | BIDIRECTIONAL |
| A | DIRECTIONAL |
| B | OMNIDIRECTIONAL |
| G | REVERSIBLE |
| H | SLEWABLE |
| J | SWITCHABLE |
| C | UNIDIRECTIONAL |
AJDHDBEAM SCANNING METHOD
THE MEANS USED TO DIRECT A BEAM/S/ OF ENERGY SUCCESSIVELY OVER A GIVEN REGION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AJDH3DDWDC*;AJDH3DDWDC$DJ*;AJDH3DDWDC$$DJ*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DDV | FIRST ANTENNA |
| 3DDW | SECOND ANTENNA |
| 3DDX | THIRD ANTENNA |
| 3DDY | FOURTH ANTENNA |
| 3DDZ | FIFTH ANTENNA |
| 3DEA | SIXTH ANTENNA |
| 3DEB | SEVENTH ANTENNA |
| 3DEC | EIGHTH ANTENNA |
| 3DED | NINTH ANTENNA |
| 3DEG | TWELFTH ANTENNA |
| 3DEI | FOURTEENTH ANTENNA |
| 3DEJ | FIFTEENTH ANTENNA |
| 3DEL | ALL ANTENNAS |
| 3DEM | SINGLE ANTENNA ELEMENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD55) | Reply |
| B | FIXED |
| C | OSCILLATING |
| D | ROTATING |
| J | TILTING |
AXGYDMOUNTING METHOD
THE MEANS OF ATTACHING THE ITEM.
Enter the applicable reply code from the table below
(AXGYDAHN*;AXGYDAES$DBWP*;AXGYDAES$$DBWP*)
| Table 1 |
| Reply Code (AM39) | Reply |
| BWL | BALL AND SOCKET |
| ABB | BASE |
| AAC | BOLT |
| ABC | BRACKET(S) |
| BWM | BUMPER CHAIN |
| ABH | CLAMP |
| AFL | CLIP |
| AFQ | CONNECTOR |
| BTX | COUPLING NUT |
| BSC | FERRULE |
| ACR | FLANGE |
| ABL | FRICTION |
| BWN | GUY WIRE |
| AGC | HINGE |
| AGG | HOOK |
| AHN | MAGNETIC |
| AAJ | MOUNTING CLAMPS |
| AEE | PLATE |
| ABP | PLUG-IN |
| BWP | REEL |
| AQZ | SHACKLE |
| ABY | SLOT |
| BWQ | SUCTION |
| ACD | TERMINAL |
| ACE | THREADED BASE |
| AES | THREADED BODY |
| AFA | THREADED BUSHING |
| AHF | THREADED HOLE(S) |
| AET | THREADED STUD(S) |
| BDB | U-BOLT |
| ACQ | UNTHREADED HOLE(S) |
| AEW | UNTHREADED STUD |
| ARF | WAVEGUIDE |
IF STYLE/REPLY CODE(s) ACQ WERE ENTERED FOR MRC CSCF, YOU MUST ANSWER MRC (AHUC and AHUD)
CSCFDTERMINAL TYPE
INDICATES THE TYPE OF TERMINAL FOR PROVIDING ELECTRICAL CONNECTION TO THE ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CSCF3DDXDABQ*;CSCF3DDXDABQ$DACX*;CSCF3DDXDABQ$$DACX*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DDV | FIRST ANTENNA |
| 3DDW | SECOND ANTENNA |
| 3DDX | THIRD ANTENNA |
| 3DDY | FOURTH ANTENNA |
| 3DDZ | FIFTH ANTENNA |
| 3DEA | SIXTH ANTENNA |
| 3DEB | SEVENTH ANTENNA |
| 3DEC | EIGHTH ANTENNA |
| 3DED | NINTH ANTENNA |
| 3DEG | TWELFTH ANTENNA |
| 3DEJ | FIFTEENTH ANTENNA |
| 3DEL | ALL ANTENNAS |
| 3DEM | SINGLE ANTENNA ELEMENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN89) | Reply |
| AGB | BUSHING |
| AEP | CABLE W/CONNECTOR |
| ACX | CIRCULAR FLANGE |
| ADB | CLIP |
| AGC | COLLAR/RING |
| AAF | CONNECTOR, RECEPTACLE |
| AAH | FERRULE |
| ACQ | RECEPTACLE, COAXIAL |
| ACW | RECTANGULAR FLANGE |
| ABQ | SCREW |
| AAS | SOLDER STUD |
| AEK | SOLDERLESS LUG |
| AQL | SUBMINIATURE CONNECTOR |
| ABX | TAB W/SCREW |
| ABB | TAB, SOLDER LUG |
| AGX | TERMINAL BLOCK W/SCREWS |
| ABC | THREADED HOLE |
| ABD | THREADED STUD |
| ACB | TURRET |
| ABH | UNTHREADED HOLE |
| ACM | WIRE HOOK |
| ACC | WIRE LEAD |
| ACD | WIRE LOOP |
AJCT*DELECTROMAGNETIC POLARIZATION TYPE
THE ORIENTATION OF THE ELECTRICAL VECTOR OF ENERGY RADIATED FROM THE ITEM RELATIVE TO THE LINE OF PROPAGATION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AJCT3DEMDAP*;AJCT3DEMDAP$DAB*;AJCT3DEMDAP$$DAB*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DDV | FIRST ANTENNA |
| 3DDW | SECOND ANTENNA |
| 3DDX | THIRD ANTENNA |
| 3DDY | FOURTH ANTENNA |
| 3DEC | EIGHTH ANTENNA |
| 3DEG | TWELFTH ANTENNA |
| 3DEI | FOURTEENTH ANTENNA |
| 3DEL | ALL ANTENNAS |
| 3DEM | SINGLE ANTENNA ELEMENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AF63) | Reply |
| FB | 45 DEG LEFT CIRCULAR |
| FC | 45 DEG LEFT ELLIPTICAL |
| FD | 45 DEG RIGHT CIRCULAR |
| FE | 45 DEG RIGHT ELLIPTICAL |
| AH | CIRCULAR |
| AN | ELLIPTICAL |
| AC | HORIZONTAL |
| AK | LEFT CIRCULAR |
| AQ | LEFT ELLIPTICAL |
| AG | LINEAR |
| FF | ORTHOGONAL |
| AJ | RIGHT CIRCULAR |
| AP | RIGHT ELLIPTICAL |
| AD | SLANT LINEAR |
| AB | VERTICAL |
AJCV*DUNIDIRECTIONAL BEAM TYPE
INDICATES THE TYPE OF BEAM PATTERN OF RECEIVED SIGNALS FROM AN ITEM WITH UNIDIRECTIONAL RADIATION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AJCV3DELDB*;AJCV3DELDB$DC*;AJCV3DELDB$$DC*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DDV | FIRST ANTENNA |
| 3DEL | ALL ANTENNAS |
| 3DEM | SINGLE ANTENNA ELEMENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AF64) | Reply |
| G | CARDIOID |
| D | COSECANT SQUARED |
| B | FLARE |
| H | HELICAL |
| C | PENCIL |
| E | SHAPED |
| F | SINGLE BROAD LOBE |
ACZB*JFREQUENCY RATING
THE NUMBER OF COMPLETE CYCLIC CHANGES,PER UNIT OF TIME,FOR WHICH AN ITEM IS RATED.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACZB3HOUJMA2.0*;ACZB3HOUJMA2.0$JMA2.0*;ACZB3HOUJMA2.0$$JMA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DDV | FIRST ANTENNA |
| 3DDW | SECOND ANTENNA |
| 3DDX | THIRD ANTENNA |
| 3DDY | FOURTH ANTENNA |
| 3DDZ | FIFTH ANTENNA |
| 3DEA | SIXTH ANTENNA |
| 3DEB | SEVENTH ANTENNA |
| 3DEC | EIGHTH ANTENNA |
| 3DED | NINTH ANTENNA |
| 3DEE | TENTH ANTENNA |
| 3DEF | ELEVENTH ANTENNA |
| 3DEG | TWELFTH ANTENNA |
| 3DEH | THIRTEENTH ANTENNA |
| 3DEI | FOURTEENTH ANTENNA |
| 3DEJ | FIFTEENTH ANTENNA |
| 3DEK | SEVENTEENTH ANTENNA |
| 3DEL | ALL ANTENNAS |
| 3DEM | SINGLE ANTENNA ELEMENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3ILM | EIGHTEENTH ANTENNA |
| Table 2 |
| Reply Code (AC32) | Reply |
| G | GIGAHERTZ |
| E | HERTZ |
| K | KILOHERTZ |
| M | MEGAHERTZ |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJDB*JPOWER RATING
THE AMOUNT OF ELECTRICAL ENERGY THAT CAN BE DISSIPATED.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJDB3DEIJCD2.0*;AJDB3DEIJCD2.0$JCD2.0*;AJDB3DEIJCD2.0$$JCD2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DDV | FIRST ANTENNA |
| 3DDW | SECOND ANTENNA |
| 3DDX | THIRD ANTENNA |
| 3DDY | FOURTH ANTENNA |
| 3DDZ | FIFTH ANTENNA |
| 3DEA | SIXTH ANTENNA |
| 3DEB | SEVENTH ANTENNA |
| 3DEC | EIGHTH ANTENNA |
| 3DED | NINTH ANTENNA |
| 3DEE | TENTH ANTENNA |
| 3DEF | ELEVENTH ANTENNA |
| 3DEG | TWELFTH ANTENNA |
| 3DEH | THIRTEENTH ANTENNA |
| 3DEI | FOURTEENTH ANTENNA |
| 3DEL | ALL ANTENNAS |
| 3DEM | SINGLE ANTENNA ELEMENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC33) | Reply |
| L | KILOWATTS |
| R | MEGAWATTS |
| C | MICROWATTS |
| M | MILLIWATTS |
| W | WATTS |
| Table 3 |
| Reply Code (AF65) | Reply |
| D | AVERAGE |
| B | CW |
| C | PEAK |
| E | PULSE POWER |
CTMN*BPOWER GAIN IN DECIBELS
THE RATIO OF THE SIGNAL INTENSITY OF AN ITEM RADIATED IN A SPECIFIC DIRECTION TO THE SIGNAL INTENSITY RADIATED IN THE SAME DIRECTION BY A STANDARD DEVICE,EXPRESSED IN DECIBELS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(CTMN3DDVB2.0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DDV | FIRST ANTENNA |
| 3DDW | SECOND ANTENNA |
| 3DDX | THIRD ANTENNA |
| 3DDY | FOURTH ANTENNA |
| 3DDZ | FIFTH ANTENNA |
| 3DEG | TWELFTH ANTENNA |
| 3DEI | FOURTEENTH ANTENNA |
| 3DEL | ALL ANTENNAS |
| 3DEM | SINGLE ANTENNA ELEMENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AJDD*BCHARACTERISTIC IMPEDANCE IN OHMS
THE REACTANCE-RESISTANCE COMPLEX VALUE WHICH MUST BE MATCHED BY THE TRANSMISSION LINE AND TERMINATION TO ACHIEVE LOWEST STANDING WAVE RATIO,EXPRESSED IN OHMS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(AJDD3DELB2.0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DDV | FIRST ANTENNA |
| 3DDW | SECOND ANTENNA |
| 3DDX | THIRD ANTENNA |
| 3DDZ | FIFTH ANTENNA |
| 3DEA | SIXTH ANTENNA |
| 3DEB | SEVENTH ANTENNA |
| 3DEC | EIGHTH ANTENNA |
| 3DEG | TWELFTH ANTENNA |
| 3DEI | FOURTEENTH ANTENNA |
| 3DEL | ALL ANTENNAS |
| 3DEM | SINGLE ANTENNA ELEMENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AHUC*DCOAXIAL CONNECTOR SERIES DESIGNATION
A LETTER OR GROUP OF LETTERS USED TO DESIGNATE THE PARTICULAR COAXIAL CONNECTOR SERIES.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AHUC3DEBDCM*;AHUC3DEBDCM$DAP*;AHUC3DEBDCM$$DAP*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DDV | FIRST ANTENNA |
| 3DDW | SECOND ANTENNA |
| 3DDX | THIRD ANTENNA |
| 3DDY | FOURTH ANTENNA |
| 3DDZ | FIFTH ANTENNA |
| 3DEA | SIXTH ANTENNA |
| 3DEB | SEVENTH ANTENNA |
| 3DEC | EIGHTH ANTENNA |
| 3DEL | ALL ANTENNAS |
| 3DEM | SINGLE ANTENNA ELEMENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AF42) | Reply |
| AH | BN |
| AB | BNC |
| BB | BRM |
| BZ | BRMM |
| CA | BRN |
| BG | BSM |
| AC | C |
| CB | CUB |
| CC | DC |
| CD | DM |
| BS | EIA |
| AD | HN |
| AE | LC |
| AQ | LN |
| AF | LT |
| AR | MB |
| AS | MC |
| CE | MDS |
| BM | MFM |
| CF | MHB |
| AT | MHV |
| CG | MLC |
| CH | MLT |
| CJ | MPC |
| AJ | N |
| CK | NDC |
| BN | NPM |
| BC | OSM |
| BD | OSSM |
| BE | PULSE |
| AV | QC |
| AK | QDL |
| AL | QDS |
| AX | QL |
| AW | QM |
| CL | QNC |
| CM | QSC |
| BH | RF |
| BA | SC |
| AY | SKL |
| AP | SM |
| BP | SMA |
| BJ | SPECIAL |
| BL | TM |
| AG | TNC |
| AZ | TND |
| AM | TPS |
| BF | TWIN |
| BT | UG |
| AN | UHF |
| BK | UHP |
| BQ | WPM |
| BR | WPN |
AHUD*DCONNECTOR END DESIGN
THE DESIGN OF THE CONNECTOR END.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AHUD3DDWDE*;AHUD3DDWDE$DD*;AHUD3DDWDE$$DD*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DDV | FIRST ANTENNA |
| 3DDW | SECOND ANTENNA |
| 3DDX | THIRD ANTENNA |
| 3DEC | EIGHTH ANTENNA |
| 3DEL | ALL ANTENNAS |
| 3DEM | SINGLE ANTENNA ELEMENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB60) | Reply |
| D | PIN |
| E | SOCKET |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJFA2.0*;ABHPJFA2.0$$JFA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAA2.0*;ABKWJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJFB2.0*;ABMKJFB2.0$$JFB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJFC2.0*;ADAVJFC2.0$$JFC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABTJ*AMOUNTING HOLE QUANTITY
THE NUMBER OF MOUNTING HOLES PROVIDED.
Enter the numeric reply with a minimum of one digit.
(ABTJA10*)
ABTB*JMOUNTING HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A MOUNTING HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABTBJAB2.0*;ABTBJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABFF*DFURNISHED ITEMS
ITEMS FURNISHED AS ACCESSORIES WHICH ARE NOT SPECIFIED ELSEWHERE.
Enter the applicable reply code from the table below
(ABFFDBAM*;ABFFDAYX$$DBBK*)
| Table 1 |
| Reply Code (AB28) | Reply |
| AYA | ABSORBER |
| AYB | ACTUATOR |
| ACH | ADAPTER |
| AYC | ANCHOR |
| AYD | ANCHOR KIT |
| AYE | ATTENUATOR |
| AYF | BASE |
| AYG | BLOCK |
| AYH | BRACE |
| ABS | BRACKET |
| AEL | CAP |
| AGC | CARRYING CASE |
| CAU | CD ROM |
| AMM | CHAIN |
| AYJ | CHAIN MOUNT BUMPER |
| AYK | CHANNEL |
| AMN | CLAMP |
| AYL | CLEVIS ROD |
| AYM | COMPENSATOR |
| AXQ | CONNECTOR |
| AYN | CONTROL |
| AYP | CORONA BALL |
| AYQ | COUPLER |
| AKG | COVER |
| AYR | CURTAIN KIT |
| AYS | DIPLEXER |
| CAW | DIRECT CURRENT POWER CABLE |
| AYT | DRIVE MOTOR |
| AYW | ELECTRICAL CABLE |
| AYX | ELECTRICAL CABLE ASSEMBLY |
| AYY | ERECTION KIT |
| AYZ | FEED |
| AZA | FILTER |
| AZB | FLEXIBLE RADOME |
| ARX | FUSE |
| ACN | GASKET |
| AZC | GONIOMETER |
| AZD | GROUND CONDUCTOR |
| AZE | GROUND ROD |
| AZF | GROUND SCREEN |
| AZG | GROUND SCREEN KIT |
| AZH | GROUNDING KIT |
| AGS | GUY LINE |
| AZJ | GUY LINE SET |
| AZK | GUY ROD |
| AZL | HALYARD |
| AQF | HANDLE |
| ALP | HEATER |
| AZM | INSTALLATION HARDWARE |
| ATP | INSULATOR |
| ABF | JUNCTION BOX |
| AZN | LENS |
| AZP | LIGHT |
| AZQ | LIGHT ASSEMBLY |
| AZR | LIGHT KIT |
| AZS | LIGHTNING ARRESTOR |
| AZT | LIGHTNING ROD |
| AZW | LOADING COIL |
| AZX | MARKER |
| AZY | MAST |
| AZZ | MAST HEAD |
| BAA | MAST LAUNCHER |
| BAB | MAST SECTION |
| BAC | MATCHING NETWORK |
| BAD | MOUNTING HARDWARE |
| BAE | MOUNTING KIT |
| BAF | MULTICOUPLER |
| BAG | PEDESTAL |
| BAH | PHASE SHIFTER |
| ATB | PLATE |
| BAJ | POLARIZER |
| BAK | POWER DIVIDER |
| BAL | RADOME |
| BAM | REEL |
| BAN | REEL ASSEMBLY |
| BAP | REFLECTOR |
| CAV | RF CABLES |
| BAQ | RIGID RADOME |
| AQW | RING |
| AFH | SEAL |
| ABZ | SHIELD |
| BAR | SPARE PARTS KIT |
| BAS | SPLICE ASSEMBLY |
| BAT | SPOOL |
| AMY | SPRING |
| ABJ | STORAGE CASE |
| BAW | SUPPORT |
| ABH | SWITCH |
| BAX | TEST PROBE |
| BAY | TOOL KIT |
| BAZ | TOWER |
| BBA | TOWER KIT |
| BBB | TOWER SECTION |
| BBC | TRANSFORMER |
| BBD | TRANSMISSION LINE |
| CAT | TRANSPORT CASE |
| BBE | TRIPOD |
| BBF | TUNING UNIT |
| BBG | VACUUM CUP |
| BBH | WAVEGUIDE ASSEMBLY |
| BBJ | WAVEGUIDE HANGER |
| BBK | WAVEGUIDE HORN |
| BBL | WAVEGUIDE ROTARY JOINT |
| BBM | WINCH |
ADZC*DENVIRONMENTAL PROTECTION
THE ENVIRONMENTAL ELEMENTS OR CONDITIONS THAT AN ITEM IS DESIGNED OR PROTECTED TO RESIST OR WITHSTAND SATISFACTORILY.
Enter the applicable reply code from the table below
(ADZCDAAF*;ADZCDABN$$DADB*)
| Table 1 |
| Reply Code (AA65) | Reply |
| ACB | COLD RESISTANT |
| ACY | CORROSION PROOF |
| AAF | DUST RESISTANT |
| AAE | DUSTPROOF |
| AAG | EXPLOSION PROOF |
| AAJ | FIRE RESISTANT |
| AAH | FIREPROOF |
| AAM | FUNGUS PROOF |
| AAN | FUNGUS RESISTANT |
| AAP | HEAT RESISTANT |
| ADB | HERMETIC |
| AFE | HIGH WIND RESISTANT |
| ABP | HUMIDITY PROOF |
| AAR | HUMIDITY RESISTANT |
| AEP | ICE RESISTANT |
| AFF | ICEPROOF |
| AAT | MOISTURE PROOF |
| AAW | MOISTURE RESISTANT |
| ADK | RAIN TIGHT |
| ADL | SALT SPRAY PROOF |
| ABQ | SALT SPRAY RESISTANT |
| ABA | SALT WATER RESISTANT |
| ABB | SAND PROOF |
| ABC | SAND RESISTANT |
| ABD | SHOCK PROOF |
| ABE | SHOCK RESISTANT |
| ABW | SUBMERSIBLE |
| ABG | THERMAL SHOCK RESISTANT |
| ABH | VIBRATION PROOF |
| ABJ | VIBRATION RESISTANT |
| ABK | WATERPROOF |
| ABL | WATERTIGHT |
| ABN | WEATHER RESISTANT |
| ABM | WEATHERPROOF |
| ADD | WINDPROOF |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDCEN*;CBBLDCER$$DCED*)
| Table 1 |
| Reply Code (AN47) | Reply |
| ASQ | ADJUSTABLE |
| CEC | COLLAPSIBLE |
| CED | ELECTRICALLY STEERABLE |
| CEE | FAIL-SAFE FEATURE |
| CEF | FOCUSABLE |
| CEG | HANDHELD |
| ATL | HIGH GAIN |
| CEH | INFLATABLE |
| CEJ | INTERCHANGEABLE ELEMENT |
| CEK | MOBILE |
| CEL | PRESSURIZED |
| CEM | RETRACTABLE |
| FNY | ROHS DIRECTIVE COMPLIANCE |
| CEN | RUGGEDIZED |
| BAY | SPRING LOADED |
| CEP | TELESCOPIC |
| CEQ | TRANSPORTABLE |
| CES | W/FOLDING JOINT |
| CET | W/PROVISION FOR MOUNTING DEICER |
| CEW | W/PROVISION FOR MOUNTING HEATER |
| CEX | W/PROVISION FOR MOUNTING OBSTRUCTION LIGHT |
| CER | WARNING FEATURE |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
CTLS*JBEAM WIDTH ANGLE
THE ANGLE BETWEEN TWO OPPOSITE HALF-POWER (THREE DECIBEL (3 DB)) POINTS OF THE BEAM.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTLS3DEBJDA2.0*;CTLS3DEBJDA2.0$JDA2.0*;CTLS3DEBJDA2.0$$JDA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DDV | FIRST ANTENNA |
| 3DDW | SECOND ANTENNA |
| 3DDX | THIRD ANTENNA |
| 3DDY | FOURTH ANTENNA |
| 3DDZ | FIFTH ANTENNA |
| 3DEA | SIXTH ANTENNA |
| 3DEB | SEVENTH ANTENNA |
| 3DEC | EIGHTH ANTENNA |
| 3DED | NINTH ANTENNA |
| 3DEL | ALL ANTENNAS |
| 3DEM | SINGLE ANTENNA ELEMENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP38) | Reply |
| D | DEGREES |
| R | RADIANS |
| Table 3 |
| Reply Code (AA99) | Reply |
| A | HORIZONTAL |
| B | VERTICAL |
AFGA*JOPERATING TEMP RANGE
THE MINIMUM AND MAXIMUM LIMITS OF TEMPERATURE AT WHICH THE ITEM IS RATED FOR OPERATION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFGAJFM32.0/P50.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
AJDF*ATERMINATION IDENTIFICATION
THE SPECIFICATION,STANDARD,OR THE NUMBER OR SYMBOL OF THE MANUFACTURER USED TO IDENTIFY THE TERMINATION.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(AJDF3DELAR5)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DDV | FIRST ANTENNA |
| 3DEL | ALL ANTENNAS |
| 3DEM | SINGLE ANTENNA ELEMENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AJDG*ATERMINATION MANUFACTURER CODE
THE IDENTIFYING NUMERIC CODE OF THE ORIGINATOR THAT CONTROLS OR MANUFACTURES THE TERMINATION.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with five character(s) exactly.
(AJDG3AEEAA3N3X)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DDV | FIRST ANTENNA |
| 3DEM | SINGLE ANTENNA ELEMENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AJDJ*DPOSITIONING DEVICE TYPE
INDICATES THE TYPE OF DEVICE USED TO EFFECT POSITIONING OR TO VARY POSITIONS (AS IN SCANNING) OF THE ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AJDJ3AEEDAB*;AJDJ3AEEDAB$DD*;AJDJ3AEEDAB$$DD*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DDV | FIRST ANTENNA |
| 3DEL | ALL ANTENNAS |
| 3DEM | SINGLE ANTENNA ELEMENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AE34) | Reply |
| F | DRIVE MOTOR |
| AB | HYDRAULIC |
| AC | MECHANICAL |
| D | SYNCHRO |
AKRE*JVOLTAGE RATING IN VOLTS
THE VOLTAGE RATING AT WHICH THE ITEM IS DESIGNED TO OPERATE,EXPRESSED IN VOLTS.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKRE3DDWJB2.0*;AKRE3DDWJB2.0$JB2.0*;AKRE3DDWJB2.0$$JB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DDV | FIRST ANTENNA |
| 3DDW | SECOND ANTENNA |
| 3DDX | THIRD ANTENNA |
| 3DEL | ALL ANTENNAS |
| 3DEM | SINGLE ANTENNA ELEMENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB62) | Reply |
| B | AC |
| C | DC |
AEJN*JDISTANCE BETWEEN MOUNTING FACILITY CENTERS
THE DISTANCE BETWEEN MOUNTING FACILITY CENTERS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEJNJFB2.0*;AEJNJFB2.0$$JFB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDAUA000*;PRMTDAGA000$DPDA000*;PRMTDAGA000$$DPDA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJPDA000E2.0*;PMWTJPDA000E2.0$JPDA000E2.0*;PMWTJPDA000E2.0$$JPDA000E2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| C | CARAT |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJAZA0002.0*;PMLCJAZA0002.0$JAZA0002.0*;PMLCJAZA0002.0$$JAZA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCN2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
| CF | CUBIC FEET |
| CN | CUBIC INCHES |
| CM | CUBIC METERS |
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAP6)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAH3)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.
(NTRDA80-05-28*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information