An item which is rigid or semi-rigid, generally flat and smooth designed to be attached to an item and provides data such as name/nomenclature, weight, tire pressure, dimensional data and the like. See also MARKER,IDENTIFICATION; PLATE,DESIGNATION; PLATE,INSTRUCTION; PLATE SET,IDENTIFICATION; and TAG,MARKER. Excludes:LABEL.
ISAC Reply 3AEE added to MRC AYBM.
ISAC Reply 3AFG added to MRC AYBM.
ISAC Reply 3AIV added to MRC AYBM.
ISAC Reply 3AIW added to MRC AYBM.
ISAC Reply 3AIX added to MRC AYBM.
ISAC Reply 3AIY added to MRC AYBM.
ISAC Reply 3AIZ added to MRC AYBM.
ISAC Reply 3AJA added to MRC AYBM.
ISAC Reply 3AJB added to MRC AYBM.
ISAC Reply 3AJC added to MRC AYBM.
ISAC Reply 3AJD added to MRC AYBM.
ISAC Reply 3AJE added to MRC AYBM.
ISAC Reply 3AJF added to MRC AYBM.
ISAC Reply 3AJG added to MRC AYBM.
ISAC Reply 3AJH added to MRC AYBM.
ISAC Reply 3AJI added to MRC AYBM.
ISAC Reply 3AJJ added to MRC AYBM.
ISAC Reply 3AJK added to MRC AYBM.
ISAC Reply 3AJL added to MRC AYBM.
ISAC Reply 3AJM added to MRC AYBM.
ISAC Reply 3AJN added to MRC AYBM.
ISAC Reply 3AJO added to MRC AYBM.
ISAC Reply 3AJP added to MRC AYBM.
ISAC Reply 3HOU added to MRC AYBM.
ISAC Reply 1A deleted from MRC AYBM.
ISAC Reply 1B deleted from MRC AYBM.
ISAC Reply 1Z deleted from MRC AYBM.
ISAC Reply 3AEE added to MRC ALFP.
ISAC Reply 3AFG added to MRC ALFP.
ISAC Reply 3AIV added to MRC ALFP.
ISAC Reply 3AIW added to MRC ALFP.
ISAC Reply 3AIZ added to MRC ALFP.
ISAC Reply 3AJA added to MRC ALFP.
ISAC Reply 3AJB added to MRC ALFP.
ISAC Reply 3AJC added to MRC ALFP.
ISAC Reply 3AJD added to MRC ALFP.
ISAC Reply 3AJE added to MRC ALFP.
ISAC Reply 3AJF added to MRC ALFP.
ISAC Reply 3AJG added to MRC ALFP.
ISAC Reply 3AJJ added to MRC ALFP.
ISAC Reply 3AJK added to MRC ALFP.
ISAC Reply 3AJL added to MRC ALFP.
ISAC Reply 3AJM added to MRC ALFP.
ISAC Reply 3AJN added to MRC ALFP.
ISAC Reply 3AJO added to MRC ALFP.
ISAC Reply 3HOU added to MRC ALFP.
ISAC Reply 1A deleted from MRC ALFP.
ISAC Reply 1B deleted from MRC ALFP.
ISAC Reply 1Z deleted from MRC ALFP.
Reply WH0035 added to MRC HUES.
ISAC Reply 3ABE added to MRC HUES.
ISAC Reply 3AEE added to MRC HUES.
ISAC Reply 3AWI added to MRC HUES.
ISAC Reply 3AWM added to MRC HUES.
ISAC Reply 3AWN added to MRC HUES.
ISAC Reply 3AWO added to MRC HUES.
ISAC Reply 3AWP added to MRC HUES.
ISAC Reply 3AWQ added to MRC HUES.
ISAC Reply 3AWR added to MRC HUES.
ISAC Reply 3AWS added to MRC HUES.
ISAC Reply 3AWT added to MRC HUES.
ISAC Reply 3AWU added to MRC HUES.
ISAC Reply 3AWV added to MRC HUES.
ISAC Reply 3AWW added to MRC HUES.
ISAC Reply 3AWX added to MRC HUES.
ISAC Reply 3AWY added to MRC HUES.
ISAC Reply 3AWZ added to MRC HUES.
ISAC Reply 3AXA added to MRC HUES.
ISAC Reply 3AXB added to MRC HUES.
ISAC Reply 3AXC added to MRC HUES.
ISAC Reply 3HOU added to MRC HUES.
ISAC Reply 2AA deleted from MRC HUES.
ISAC Reply 2AB deleted from MRC HUES.
ISAC Reply 2AC deleted from MRC HUES.
ISAC Reply 2AD deleted from MRC HUES.
ISAC Reply 2BA deleted from MRC HUES.
ISAC Reply 2BB deleted from MRC HUES.
ISAC Reply 2BC deleted from MRC HUES.
ISAC Reply 2BD deleted from MRC HUES.
ISAC Reply 2XA deleted from MRC HUES.
ISAC Reply 2XB deleted from MRC HUES.
ISAC Reply 2XC deleted from MRC HUES.
ISAC Reply 2XD deleted from MRC HUES.
ISAC Reply 2XX deleted from MRC HUES.
ISAC Reply 3ABE added to MRC HDCL.
ISAC Reply 3AEE added to MRC HDCL.
ISAC Reply 3AWI added to MRC HDCL.
ISAC Reply 3AWM added to MRC HDCL.
ISAC Reply 3AWN added to MRC HDCL.
ISAC Reply 3AWO added to MRC HDCL.
ISAC Reply 3AWP added to MRC HDCL.
ISAC Reply 3AWQ added to MRC HDCL.
ISAC Reply 3AWR added to MRC HDCL.
ISAC Reply 3AWS added to MRC HDCL.
ISAC Reply 3AWT added to MRC HDCL.
ISAC Reply 3AWU added to MRC HDCL.
ISAC Reply 3AWV added to MRC HDCL.
ISAC Reply 3AWW added to MRC HDCL.
ISAC Reply 3AWX added to MRC HDCL.
ISAC Reply 3AWY added to MRC HDCL.
ISAC Reply 3AWZ added to MRC HDCL.
ISAC Reply 3AXA added to MRC HDCL.
ISAC Reply 3AXB added to MRC HDCL.
ISAC Reply 3AXC added to MRC HDCL.
ISAC Reply 3HOU added to MRC HDCL.
ISAC Reply 2AA deleted from MRC HDCL.
ISAC Reply 2AB deleted from MRC HDCL.
ISAC Reply 2AC deleted from MRC HDCL.
ISAC Reply 2AD deleted from MRC HDCL.
ISAC Reply 2BA deleted from MRC HDCL.
ISAC Reply 2BB deleted from MRC HDCL.
ISAC Reply 2BC deleted from MRC HDCL.
ISAC Reply 2BD deleted from MRC HDCL.
ISAC Reply 2XA deleted from MRC HDCL.
ISAC Reply 2XB deleted from MRC HDCL.
ISAC Reply 2XC deleted from MRC HDCL.
ISAC Reply 2XD deleted from MRC HDCL.
ISAC Reply 2XX deleted from MRC HDCL.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED00155*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDPCBN00*;MATTDPCN000$DAL1060*;MATTDPCN000$$DAL1060*)
| Table 1 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL1060 | ALUMINUM ALLOY 1060 |
| AL1100 | ALUMINUM ALLOY 1100 |
| AL5052 | ALUMINUM ALLOY 5052 |
| ZSU000 | ALUMINUM ALLOY 5059 |
| AL5083 | ALUMINUM ALLOY 5083 |
| AL5086 | ALUMINUM ALLOY 5086 |
| AL6061 | ALUMINUM ALLOY 6061 |
| CNA000 | CARBON |
| PPC000 | CARDBOARD |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| FBA000 | FIBER |
| GSA000 | GLASS |
| GSB000 | GLASS FIBER |
| MGB000 | MAGNESIUM ALLOY |
| NLA000 | NICKEL |
| PPA000 | PAPER |
| PCA000 | PLASTIC |
| PCD000 | PLASTIC ACRYLIC |
| PCCK00 | PLASTIC CELLULOSE |
| PCBN00 | PLASTIC CELLULOSE ACETATE BUTYRATE |
| PCH000 | PLASTIC EPOXY |
| PCJ000 | PLASTIC MELAMINE |
| PCK000 | PLASTIC METHYL METHACRYLATE |
| PCM000 | PLASTIC PHENOL-FORMALDEHYDE |
| PCN000 | PLASTIC PHENOLIC |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCR000 | PLASTIC POLYCARBONATE |
| PCW000 | PLASTIC POLYESTER |
| PCY000 | PLASTIC POLYETHYLENE TEREPHTHALATE |
| PCAB00 | PLASTIC POLYOLEFIN |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| PCAP00 | PLASTIC VINYL |
| PCBD00 | PLASTIC VINYL CHLORIDE |
| PCAT00 | PLASTIC VINYLIDENE CHLORIDE |
| RCE000 | RUBBER |
| RCB000 | RUBBER SYNTHETIC |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
| ZNB000 | ZINC |
| ZNA000 | ZINC ALLOY |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
IF STYLE/REPLY CODE(s) A1, A2, A3, A4, A5, A6, A7, A8 OR A9 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABRY and ABNM and ABGL)
IF STYLE/REPLY CODE(s) A1A WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABRY and ABNM and ABGL)
IF STYLE/REPLY CODE(s) A10, A11, A12, A18, A19, A20, A21, A23, A30, A31 OR A26 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABRY and ABGL and ABNM)
IF STYLE/REPLY CODE(s) A13 OR A14 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ALHL and ABGL and ABNM)
IF STYLE/REPLY CODE(s) A16 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABNM and ASDB)
IF STYLE/REPLY CODE(s) A17 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ALHL and ABNM)
IF STYLE/REPLY CODE(s) A22 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABMZ and ABNM)
IF STYLE/REPLY CODE(s) A28 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (AEJZ and ABGL and ABRY)
IF STYLE/REPLY CODE(s) A29 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABMH and ALHQ and ALHP and ALKD and ALKE)
IF STYLE/REPLY CODE(s) A15 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABNM and ASDB)
IF STYLE/REPLY CODE(s) A32 OR A33 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABGL and ABNM and ABRY and ADNU)
AGTALBASIC SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE BASIC APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AGTALA21)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAB1064 | A1 | SQUARE |
| AAB1073 | A10 | RECTANGULAR W/CONCAVE BOTTOM |
| AAB1074 | A11 | RECTANGULAR W/NOTCHED CORNERS |
| AAB1075 | A12 | RECTANGULAR W/ROUNDED TOP |
| AAB1076 | A13 | TRIANGULAR |
| AAB1077 | A14 | INVERTED TRIANGULAR |
| AAB1078 | A15 | HEXAGONAL |
| AAB1079 | A16 | OCTAGONAL |
| AAB1080 | A17 | DIAMOND |
| AAB1081 | A18 | TRAPEZOIDAL |
| AAB1082 | A19 | SECTOR |
| AAB1083 | A1A | SQUARE W/ROUNDED CORNERS |
| AAB1065 | A2 | RECTANGULAR |
| AAB1084 | A20 | SEMICIRCULAR |
| AAB1085 | A21 | OVAL ELLIPTICAL |
| AAB1086 | A22 | ROUND |
| AAB1087 | A23 | CRESCENT W/POINTED ENDS |
| AAB1090 | A26 | CRESCENT W/POINTED ENDS |
| AAB1092 | A28 | RECTANGULAR BOX |
| AAB1093 | A29 | RECTANGULAR BOX W/FRAME |
| AAB1066 | A3 | RECTANGULAR W/SLIT TAB |
| AAB1094 | A30 | SHIELD |
| AAB1095 | A31 | H |
| DR11371 | A32 | RECTANGULAR W ROUNDED CORNERS |
| DR11372 | A33 | RECTANGULAR W ROUNDED CORNERS |
| AAB1067 | A4 | RECTANGULAR W/TAB AT ONE END |
| AAB1068 | A5 | RECTANGULAR W/TAB AT EACH END |
| AAB1069 | A6 | RECTANGULAR W/POINTED END |
| AAB1070 | A7 | RECTANGULAR W/ROUNDED END |
| AAB1071 | A8 | RECTANGULAR W/ROUNDED ENDS |
| AAB1072 | A9 | RECTANGULAR W/CONCAVE TOP |
ABGL*JWIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGLJLB2.0*;ABGLJLB2.0$$JLB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMH*JRECESS DEPTH
A MEASUREMENT BETWEEN SPECIFIED POINTS ON THE RECESS,IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMHJLB2.0*;ABMHJLB2.0$$JLB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMZ*JDIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMZJLB2.0*;ABMZJLB2.0$$JLB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABNM*JTHICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF AN ITEM,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABNMJLB2.0*;ABNMJLB2.0$$JLB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABRY*JLENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRYJLB2.0*;ABRYJLB2.0$$JLB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEJZ*JDEPTH
A LINEAR MEASUREMENT FROM THE SURFACE TO A SPECIFIED INNER POINT ON AN ITEM,IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEJZJLB2.0*;AEJZJLB2.0$$JLB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ALHL*JSIDE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE SIDE,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ALHLJLB2.0*;ALHLJLB2.0$$JLB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ALHP*JBOX LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF A BOX,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ALHPJLB2.0*;ALHPJLB2.0$$JLB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ALHQ*JBOX WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF A BOX,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ALHQJLB2.0*;ALHQJLB2.0$$JLB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ALKD*JFRAME LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE FRAME,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ALKDJAB2.0*;ALKDJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ALKE*JFRAME WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE FRAME,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ALKEJAB2.0*;ALKEJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADNU*JCORNER RADIUS
A MEASUREMENT OF A STRAIGHT LINE FROM THE MIDPOINT OF A ROUNDED CORNER TO ITS PERIPHERY.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADNUJAB2.0*;ADNUJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABTB*JMOUNTING HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A MOUNTING HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABTBJAC2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABTJ*AMOUNTING HOLE QUANTITY
THE NUMBER OF MOUNTING HOLES PROVIDED.
Enter the numeric reply with a minimum of one digit.
(ABTJA10*)
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(SFTTDCUA000*;SFTTDPHD000$DCMB000*;SFTTDPHD000$$DCMB000*)
| Table 1 |
| Reply Code (SF01) | Reply |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CMA000 | CHROMATE |
| CMB000 | CHROMATE ZINC |
| CRA000 | CHROMIUM |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| DCD000 | DICHROMATE SODIUM |
| ENA000 | ENAMEL |
| END000 | ENAMEL BAKED |
| CLD000 | ENAMEL PORCELAIN |
| MSD000 | EPOXY |
| IRA000 | IRIDIUM |
| LQA000 | LACQUER |
| NLA000 | NICKEL |
| XXB000 | OXIDE |
| XXA000 | OXIDE FILM |
| PNA000 | PAINT |
| PSA000 | PASSIVATE |
| PHA000 | PHOSPHATE |
| PHD000 | PHOSPHATE ZINC |
| PCA000 | PLASTIC |
| PCH000 | PLASTIC VINYL |
| PRC000 | PRIMER ZINC CHROMATE |
| VAA000 | VARNISH |
| ZNA000 | ZINC |
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
AYBM*GINSCRIPTION
THE LETTERING OR DESIGN ON THE ITEM,OR THAT IS THE ITEM.
Enter the applicable ISAC from the table below, followed by the Mode Code and the clear text reply.
(AYBM3AEEGCLEARTEXT)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AFG | BOTH SIDES |
| 3AIV | FIRST SIDE |
| 3AIW | SECOND SIDE |
| 3AIX | THIRD SIDE |
| 3AIY | FOURTH SIDE |
| 3AIZ | SINGLE SIDE |
| 3AJA | FIRST SIDE FIRST INSCRIPTION |
| 3AJB | FIRST SIDE SECOND INSCRIPTION |
| 3AJC | FIRST SIDE THIRD INSCRIPTION |
| 3AJD | FIRST SIDE FOURTH INSCRIPTION |
| 3AJE | FIRST SIDE FIFTH INSCRIPTION |
| 3AJF | SECOND SIDE FIRST INSCRIPTION |
| 3AJG | SECOND SIDE SECOND INSCRIPTION |
| 3AJH | SECOND SIDE THIRD INSCRIPTION |
| 3AJI | SECOND SIDE FOURTH INSCRIPTION |
| 3AJJ | THIRD SIDE FIRST INSCRIPTION |
| 3AJK | THIRD SIDE SECOND INSCRIPTION |
| 3AJL | THIRD SIDE THIRD INSCRIPTION |
| 3AJM | FOURTH SIDE FIRST INSCRIPTION |
| 3AJN | FOURTH SIDE SECOND INSCRIPTION |
| 3AJO | FOURTH SIDE THIRD INSCRIPTION |
| 3AJP | FIRST SIDE FIRST INSCRIPTION FIRST COLOR |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
ALFP*DMARKING DESIGNATION
A DESIGNATION OF THE MARKING(S) ON THE ITEM OR THAT IS THE ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ALFP3AJCDAD*;ALFP3AJCDAD$DAC*;ALFP3AJCDAD$$DAC*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AFG | BOTH SIDES |
| 3AIV | FIRST SIDE |
| 3AIW | SECOND SIDE |
| 3AIZ | SINGLE SIDE |
| 3AJA | FIRST SIDE FIRST INSCRIPTION |
| 3AJB | FIRST SIDE SECOND INSCRIPTION |
| 3AJC | FIRST SIDE THIRD INSCRIPTION |
| 3AJD | FIRST SIDE FOURTH INSCRIPTION |
| 3AJE | FIRST SIDE FIFTH INSCRIPTION |
| 3AJF | SECOND SIDE FIRST INSCRIPTION |
| 3AJG | SECOND SIDE SECOND INSCRIPTION |
| 3AJJ | THIRD SIDE FIRST INSCRIPTION |
| 3AJK | THIRD SIDE SECOND INSCRIPTION |
| 3AJL | THIRD SIDE THIRD INSCRIPTION |
| 3AJM | FOURTH SIDE FIRST INSCRIPTION |
| 3AJN | FOURTH SIDE SECOND INSCRIPTION |
| 3AJO | FOURTH SIDE THIRD INSCRIPTION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AF91) | Reply |
| AJ | DESIGN |
| AL | INSIGNIA |
| AM | LEGEND |
| AC | LETTERING |
| AN | SILHOUETTE |
| AD | STRIPES |
| AP | SYMBOL |
CZNF*ACOLOR CHIP NUMBER
THE IDENTIFYING NUMBER FOR THE COLOR CHIP.
Enter the alpha-numeric reply with a minimum of one character.
(CZNFAK3)
CBGR*DGLOSS DESIGNATION
THE DESIGNATOR OR TERM USED TO IDENTIFY THE GLOSS.
Enter the applicable reply code from the table below
(CBGRDABC*;CBGRDAAE$DBBB*;CBGRDAAE$$DBBB*)
| Table 1 |
| Reply Code (AK39) | Reply |
| ABJ | CHROME |
| BCJ | DULL |
| AAE | FLAT |
| ABE | FLOURESCENT |
| AAW | FROSTED |
| BAR | GLOSS |
| ABG | LUMINOUS |
| BDL | LUSTERLESS |
| BBB | MATTE |
| ABF | OPAQUE |
| AAX | POLISHED |
| ABC | SATIN |
| BCX | SEMIGLOSS |
| ABH | TRANSLUCENT |
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(HUES3AWPDNA0000*;HUES3AWPDNA0000$DSL0000*;HUES3AWPDNA0000$$DSL0000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABE | BASE |
| 3AEE | OVERALL |
| 3AWI | LENS |
| 3AWM | INSCRIPTION |
| 3AWN | INSCRIPTION BACKGROUND |
| 3AWO | SURFACE |
| 3AWP | BORDER |
| 3AWQ | FIRST SIDE BORDER |
| 3AWR | FIRST SIDE INSCRIPTION |
| 3AWS | FIRST SIDE INSCRIPTION BACKGROUND |
| 3AWT | FIRST SIDE SURFACE |
| 3AWU | SECOND SIDE BORDER |
| 3AWV | SECOND SIDE INSCRIPTION |
| 3AWW | SECOND SIDE INSCRIPTION BACKGROUND |
| 3AWX | SECOND SIDE SURFACE |
| 3AWY | SINGLE SIDE BORDER |
| 3AWZ | SINGLE SIDE INSCRIPTION |
| 3AXA | SINGLE SIDE INSCRIPTION BACKGROUND |
| 3AXB | SINGLE SIDE SURFACE |
| 3AXC | SINGLE SIDE OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD06) | Reply |
| AL0000 | ALUMINUM |
| AM0000 | AMBER |
| BE0000 | BEIGE |
| BL0000 | BLACK |
| BL0001 | BLACK, FED STD 595, 17038 |
| BL0032 | BLACK, FED STD 595, 27038 |
| BL0033 | BLACK, FED STD 595, 37038 |
| BU0000 | BLUE |
| BU0005 | BLUE, DARK |
| MS0012 | BRASS |
| BR0000 | BROWN |
| MS0013 | BUFF |
| MS0207 | BUFF, LIGHT |
| MS0073 | CHROME |
| CL0000 | CLEAR |
| CT0001 | COPPER |
| MS0096 | FROSTED |
| GL0000 | GOLD |
| GY0005 | GRAY, ALUMINUM |
| GY0012 | GRAY, HEATHER |
| GY0002 | GRAY, LIGHT |
| GY0015 | GRAY, NICKEL |
| GY0019 | GRAY, SILVER |
| GY0125 | GRAY, SKY |
| GY0021 | GRAY, STEEL |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0494 | GREEN, 383 |
| GR0032 | GREEN, LIGHT |
| GR0042 | GREEN, YELLOW |
| MS0034 | MAGENTA |
| MA0000 | MAROON |
| NA0000 | NATURAL |
| MS0038 | NICKEL |
| LD0000 | OLIVE DRAB |
| RG0000 | ORANGE |
| RG0001 | ORANGE-RED |
| RG0002 | ORANGE-YELLOW |
| PK0000 | PINK |
| PU0000 | PURPLE |
| RE0000 | RED |
| RE0009 | RED, BRIGHT |
| RE0035 | RED, DARK |
| RE0112 | RED, MUNSELL |
| SL0000 | SILVER |
| TA0000 | TAN |
| TA0099 | TAN, 686A |
| RE0063 | VERMILLION |
| VL0000 | VIOLET |
| WA0000 | WALNUT |
| WH0000 | WHITE |
| WH0027 | WHITE, FED STD 595, 37875 |
| WH0035 | WHITE, LUSTERLESS |
| WH0037 | WHITE, SILVER |
| YE0000 | YELLOW |
| YE0006 | YELLOW, CANARY |
IF YOU ANSWER MRC HDCL, YOU MUST ANSWER MRC (HUES)
HDCL*JCOLOR DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,MANUFACTURERS REFERENCE,OR INDEX SYSTEM AND THE CLASIFICATION DESIGNATION, USED TO IDENTIFY COLOR, COLOR SELECTION, COLOR MATCHING AND QUALITY CONTROL OF A SPECIFIC COLOR.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(HDCLJEATEXT1234*;HDCLJEATEXT1234$$JEATEXT1234*;HDCLJEATEXT1234$JEATEXT1234*;HDCL1BJEATEXT1234*;HDCL1BJEATEXT1234$$JEATEXT1234*;HDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABE | BASE |
| 3AEE | OVERALL |
| 3AWI | LENS |
| 3AWM | INSCRIPTION |
| 3AWN | INSCRIPTION BACKGROUND |
| 3AWO | SURFACE |
| 3AWP | BORDER |
| 3AWQ | FIRST SIDE BORDER |
| 3AWR | FIRST SIDE INSCRIPTION |
| 3AWS | FIRST SIDE INSCRIPTION BACKGROUND |
| 3AWT | FIRST SIDE SURFACE |
| 3AWU | SECOND SIDE BORDER |
| 3AWV | SECOND SIDE INSCRIPTION |
| 3AWW | SECOND SIDE INSCRIPTION BACKGROUND |
| 3AWX | SECOND SIDE SURFACE |
| 3AWY | SINGLE SIDE BORDER |
| 3AWZ | SINGLE SIDE INSCRIPTION |
| 3AXA | SINGLE SIDE INSCRIPTION BACKGROUND |
| 3AXB | SINGLE SIDE SURFACE |
| 3AXC | SINGLE SIDE OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP93) | Reply |
| M | 10TH COLOR RESPONSE |
| N | 11TH COLOR RESPONSE |
| P | 12TH COLOR RESPONSE |
| Q | 13TH COLOR RESPONSE |
| R | 14TH COLOR RESPONSE |
| S | 15TH COLOR RESPONSE |
| T | 16TH COLOR RESPONSE |
| U | 17TH COLOR RESPONSE |
| W | 18TH COLOR RESPONSE |
| X | 19TH COLOR RESPONSE |
| B | 1ST COLOR RESPONSE |
| Y | 20TH COLOR RESPONSE |
| Z | 21ST COLOR RESPONSE |
| V | 22ND COLOR RESPONSE |
| C | 2ND COLOR RESPONSE |
| D | 3RD COLOR RESPONSE |
| E | 4TH COLOR RESPONSE |
| F | 5TH COLOR RESPONSE |
| H | 6TH COLOR RESPONSE |
| J | 7TH COLOR RESPONSE |
| K | 8TH COLOR RESPONSE |
| L | 9TH COLOR RESPONSE |
| G | ALL COLOR RESPONSE |
| A | SINGLE COLOR RESPONSE |
ABSX*DATTACHMENT METHOD
THE MEANS USED TO ATTACH THE ITEM.
Enter the applicable reply code from the table below
(ABSXDCN*;ABSXDCP$DCM*;ABSXDCP$$DCM*)
| Table 1 |
| Reply Code (AB47) | Reply |
| CK | ADHESIVE |
| LC | ADHESIVE TAPE |
| CB | BONDED |
| SL | BRACKET MOUNTED |
| AA | CEMENTED |
| YD | CHAIN |
| AB | CLAMP |
| CM | CLIP |
| FX | CRIMP |
| CN | DOUBLE FLANGE |
| SF | HINGE |
| CP | HOLE |
| TT | INSERT |
| CQ | MAGNETIC |
| CR | RING |
| BK | RIVETED |
| MQ | SCREW |
| CS | SEWED |
| CT | SLITTED TAB |
| CJ | SLOT |
| CC | SOLDERED |
| KL | STRAP |
| TB | TAB |
| CX | TWINE |
| CY | WIRE |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDFHW*;CBBLDGJX$$DBZU*)
| Table 1 |
| Reply Code (AN47) | Reply |
| FGT | HEAT SENSITIVE ADHESIVE |
| DCR | MOUNTING DEVICE |
| APZ | OBSERVATION FACILITY |
| GJX | PHOTO SENSITIVE |
| BZU | PRESSURE SENSITIVE ADHESIVE TAPE |
| FHS | REFLECTIVE SURFACE |
| FHC | REMOVEABLE PROTECTIVE BACKING |
| FHV | SOLVENT ACTIVATED ADHESIVE TAPE |
| FHW | WATER ACTIVATED ADHESIVE TAPE |
ADZC*DENVIRONMENTAL PROTECTION
THE ENVIRONMENTAL ELEMENTS OR CONDITIONS THAT AN ITEM IS DESIGNED OR PROTECTED TO RESIST OR WITHSTAND SATISFACTORILY.
Enter the applicable reply code from the table below
(ADZCDAAR*;ADZCDACK$DAEF*;ADZCDACK$$DAEF*)
| Table 1 |
| Reply Code (AA65) | Reply |
| ABX | ABRASION RESISTANT |
| ABU | ACCELERATED LIGHT |
| ABV | ACCELERATED OXYGEN |
| ABY | ACID RESISTANT |
| ABZ | ALCOHOL RESISTANT |
| ACK | ALKALI RESISTANT |
| ACU | ALTITUDE |
| ADU | CARBON TETRACHLORIDE |
| ACV | CLEANING RESISTANT |
| ACB | COLD RESISTANT |
| AAC | CORROSION RESISTANT |
| ADV | CYCLIC EXPOSURE |
| AAF | DUST RESISTANT |
| AEU | FADE |
| ACQ | GREASE RESISTANT |
| AEK | HEAT |
| AAR | HUMIDITY RESISTANT |
| AEL | HYDRAULIC FLUID |
| AAV | HYDROCARBON FUEL |
| ADX | LUBRICATING OIL RESISTANT |
| ACC | MILDEW RESISTANT |
| AEV | MINERAL RESISTANT |
| AAW | MOISTURE RESISTANT |
| AHU | NONPHENOLIC GREASE SOLVENT |
| AAX | OIL RESISTANT |
| ABQ | SALT SPRAY RESISTANT |
| ABF | SOLVENT RESISTANT |
| AEF | STAIN RESISTANT |
| AHM | SYNTHETIC OIL RESISTANT |
| AHN | TEMPERATURE RESISTANT |
| ABG | THERMAL SHOCK RESISTANT |
| ACM | WATER RESISTANT |
| ABN | WEATHER RESISTANT |
ADHV*JCENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH
A MEASUREMENT OF THE CENTER TO CENTER DISTANCE BETWEEN THE MOUNTING HOLES ALONG THE LENGTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADHVJL2.0*;ADHVJL2.0$$JL2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
ADHW*JCENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH
A MEASUREMENT OF THE CENTER TO CENTER DISTANCE BETWEEN THE MOUNTING HOLES ALONG THE WIDTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADHWJL2.0*;ADHWJL2.0$$JL2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
HEAT*DHEAT TREATMENT
A COMBINATION OF TIMED HEATING AND COOLING OPERATIONS APPLIED FOR THE PURPOSE OF ANNEALING OR HARDENING THE ITEM.
Enter the applicable reply code from the table below
(HEATDTQ)
| Table 1 |
| Reply Code (AD05) | Reply |
| CX | COLD ROLLED |
| TH | COLD WORKED H14 |
| CU | EXTRUDED |
| TP | H-24 STRAIN HARDENED, PARTIALLY ANNEALED TO 1/2 HARD |
| TQ | H-32 STRAIN HARDENED, STABILIZED TO 1/4 HARD |
| QP | H-321 STRAIN HARDENED |
| LL | H-323 STRAIN HARDENED AND STABILIZED |
| CY | HARDENED |
| CT | HOT ROLLED |
| EN | QUENCHED |
| DZ | T-52 COOLED STRESS RELIEVED AND ARTIFICALLY AGED |
| TC | T-52 SOLUTION HEAT TREATED |
| TW | T-6 SOLUTION HEAT TREATED, ARTIFICALLY AGED |
| RX | T-651 SOLUTION HEAT TREATED, ARTIFICALLY AGED, AND STRESS RELIEVED BY STRETCHING |
| RK | T-6510 SOLUTION HEAT TREATED |
| RL | T-6511 SOLUTION HEAT TREATED |
| QL | T-86 SOLUTION HEAT TREATED |
| EP | TEMPERED |
CYHX*AVEHICLE DESIGN CONTROL ACTIVITY
THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE GOVERNMENT AGENCY,INDUSTRIAL ORGANIZATION,OR OTHER ENTITY,WHICH CONTROLS THE DESIGN OF THE VEHICLE.
Enter the alpha-numeric reply with five character(s) exactly.
(CYHXAC7Q8Q)
CYHY*AVEHICLE IDENTIFICATION DESIGNATOR
THE NAME OR COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH IDENTIFY THE SPECIFIC VEHICLE.
Enter the alpha-numeric reply with a minimum of one character.
(CYHYAF0)
ALDY*JINSCRIPTION HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF THE INSCRIPTION,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ALDYJLB2.0*;ALDYJLB2.0$$JLB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Enter the word CAGE immediately followed by a colon, followed by a space then the 5 position Commercial and Government Entity (CAGE) Code, followed by a space and the letters PN immediately followed by a colon, a space and the part/model/reference number.
AVMF*AADDITIVE MANUFACTURING CAGE AND PART/MODEL NUMBER
THE ADDITIVE MANUFACTURER'S FIVE-DIGIT CAGE DESIGNATION AND THE PART/MODEL NUMBER.
CAGE: XXXXX PN: XXXXXXXXX
CAGE: XXXXX PN: XXXXXXXXX AND CAGE: XXXXX PN: XXXXXXXXX
(AVMFACAGE: 30003 PN: 4866113-485-AM*;AVMFACAGE: 30003 PN: 4866113-485-AM$$CAGE: 30003 PN: 5977224-120-AM)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDE3)
| Table 1 |
| Reply Code (EN02) | Reply |
| E3 | COMPREHENSIVE PROCUREMENT GUIDELINE - NON-PAPER OFFICE PRODUCTS - PLASTIC DESKTOP ACCESSORIES |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ASDB*JWIDTH ACROSS FLATS
THE SHORTEST STRAIGHT LINE BETWEEN FLATS,PERPENDICULAR TO THE HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ASDBJLC2.0*;ASDBJLC2.0$JLC2.0*;ASDBJLC2.0$$JLC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information