A light specifically designed to be mounted on, near, or through a panel, switchboard, bulletin board, cowl, dashboard, and the like, and specifically designed to provide direct or indirect illumination thereon. It must include a shade, reflector, or other special device to direct illumination or to provide for the direction of illumination through the inherent design of the item, as in lights for edge lighted panels. It may include filters, dimming features, switches, and/or flexible gooseneck. For aircraft installed items prviding illumination for map reading or general utility illumination, in addition to panel illumination, see LIGHT (1), COCKPIT, AIRCRAFT. For items conforming to this basic definition with the additional feature of providing illuminated indication of a specific nature concerning the circuit in which it is inserted, see LIGHT (1), INDICATOR.
ISAC Reply 3AAT added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3AWI added to MRC MATT.
ISAC Reply 3BKL added to MRC MATT.
ISAC Reply 3BKM added to MRC MATT.
ISAC Reply 3BKN added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 1A deleted from MRC MATT.
ISAC Reply 1B deleted from MRC MATT.
ISAC Reply 1C deleted from MRC MATT.
ISAC Reply 1D deleted from MRC MATT.
ISAC Reply 1E deleted from MRC MATT.
ISAC Reply 3AAT added to MRC SFTT.
ISAC Reply 3AEE added to MRC SFTT.
ISAC Reply 3BKL added to MRC SFTT.
ISAC Reply 3BKM added to MRC SFTT.
ISAC Reply 3HOU added to MRC SFTT.
ISAC Reply 1A deleted from MRC SFTT.
ISAC Reply 1B deleted from MRC SFTT.
ISAC Reply 1C deleted from MRC SFTT.
ISAC Reply 1D deleted from MRC SFTT.
ISAC Reply 1E deleted from MRC SFTT.
ISAC Reply 3AEE added to MRC CRQG.
ISAC Reply 3BKS added to MRC CRQG.
ISAC Reply 3BKU added to MRC CRQG.
ISAC Reply 3BNZ added to MRC CRQG.
ISAC Reply 3BOA added to MRC CRQG.
ISAC Reply 3BOD added to MRC CRQG.
ISAC Reply 3BOK added to MRC CRQG.
ISAC Reply 3BOL added to MRC CRQG.
ISAC Reply 3HOU added to MRC CRQG.
ISAC Reply 1A deleted from MRC CRQG.
ISAC Reply 1B deleted from MRC CRQG.
ISAC Reply 1C deleted from MRC CRQG.
ISAC Reply 1D deleted from MRC CRQG.
ISAC Reply 1E deleted from MRC CRQG.
ISAC Reply 1F deleted from MRC CRQG.
ISAC Reply 1G deleted from MRC CRQG.
ISAC Reply 1H deleted from MRC CRQG.
ISAC Reply 1J deleted from MRC CRQG.
ISAC Reply 1K deleted from MRC CRQG.
ISAC Reply 1L deleted from MRC CRQG.
ISAC Reply 1M deleted from MRC CRQG.
ISAC Reply 1X deleted from MRC CRQG.
ISAC Reply 1Z deleted from MRC CRQG.
ISAC Reply 1A deleted from MRC CRQG.
ISAC Reply 1B deleted from MRC CRQG.
ISAC Reply 1C deleted from MRC CRQG.
ISAC Reply 1D deleted from MRC CRQG.
ISAC Reply 1E deleted from MRC CRQG.
ISAC Reply 1F deleted from MRC CRQG.
ISAC Reply 1G deleted from MRC CRQG.
ISAC Reply 1H deleted from MRC CRQG.
ISAC Reply 1J deleted from MRC CRQG.
ISAC Reply 1K deleted from MRC CRQG.
ISAC Reply 1L deleted from MRC CRQG.
ISAC Reply 1M deleted from MRC CRQG.
ISAC Reply 1N deleted from MRC CRQG.
ISAC Reply 1P deleted from MRC CRQG.
ISAC Reply 1Q deleted from MRC CRQG.
ISAC Reply 1R deleted from MRC CRQG.
ISAC Reply 1S deleted from MRC CRQG.
ISAC Reply 1T deleted from MRC CRQG.
ISAC Reply 1U deleted from MRC CRQG.
ISAC Reply 1V deleted from MRC CRQG.
ISAC Reply 1W deleted from MRC CRQG.
ISAC Reply 1X deleted from MRC CRQG.
ISAC Reply 1Y deleted from MRC CRQG.
ISAC Reply 1Z deleted from MRC CRQG.
ISAC Reply 3AEE added to MRC CSKH.
ISAC Reply 3BKS added to MRC CSKH.
ISAC Reply 3BKU added to MRC CSKH.
ISAC Reply 3BLI added to MRC CSKH.
ISAC Reply 3BNZ added to MRC CSKH.
ISAC Reply 3BOA added to MRC CSKH.
ISAC Reply 3BOK added to MRC CSKH.
ISAC Reply 3HOU added to MRC CSKH.
ISAC Reply 1A deleted from MRC CSKH.
ISAC Reply 1B deleted from MRC CSKH.
ISAC Reply 1C deleted from MRC CSKH.
ISAC Reply 1D deleted from MRC CSKH.
ISAC Reply 1E deleted from MRC CSKH.
ISAC Reply 1F deleted from MRC CSKH.
ISAC Reply 1G deleted from MRC CSKH.
ISAC Reply 1H deleted from MRC CSKH.
ISAC Reply 1J deleted from MRC CSKH.
ISAC Reply 1K deleted from MRC CSKH.
ISAC Reply 1L deleted from MRC CSKH.
ISAC Reply 1M deleted from MRC CSKH.
ISAC Reply 1X deleted from MRC CSKH.
ISAC Reply 1Z deleted from MRC CSKH.
ISAC Reply 1A deleted from MRC CSKH.
ISAC Reply 1B deleted from MRC CSKH.
ISAC Reply 1C deleted from MRC CSKH.
ISAC Reply 1D deleted from MRC CSKH.
ISAC Reply 1E deleted from MRC CSKH.
ISAC Reply 1F deleted from MRC CSKH.
ISAC Reply 1G deleted from MRC CSKH.
ISAC Reply 1H deleted from MRC CSKH.
ISAC Reply 1J deleted from MRC CSKH.
ISAC Reply 1K deleted from MRC CSKH.
ISAC Reply 1L deleted from MRC CSKH.
ISAC Reply 1M deleted from MRC CSKH.
ISAC Reply 1N deleted from MRC CSKH.
ISAC Reply 1P deleted from MRC CSKH.
ISAC Reply 1Q deleted from MRC CSKH.
ISAC Reply 1R deleted from MRC CSKH.
ISAC Reply 1S deleted from MRC CSKH.
ISAC Reply 1T deleted from MRC CSKH.
ISAC Reply 1U deleted from MRC CSKH.
ISAC Reply 1V deleted from MRC CSKH.
ISAC Reply 1W deleted from MRC CSKH.
ISAC Reply 1X deleted from MRC CSKH.
ISAC Reply 1Y deleted from MRC CSKH.
ISAC Reply 1Z deleted from MRC CSKH.
ISAC Reply 3AEE added to MRC CWJJ.
ISAC Reply 3BLI added to MRC CWJJ.
ISAC Reply 3BNZ added to MRC CWJJ.
ISAC Reply 3BOA added to MRC CWJJ.
ISAC Reply 3HOU added to MRC CWJJ.
ISAC Reply 1A deleted from MRC CWJJ.
ISAC Reply 1B deleted from MRC CWJJ.
ISAC Reply 1C deleted from MRC CWJJ.
ISAC Reply 1D deleted from MRC CWJJ.
ISAC Reply 1E deleted from MRC CWJJ.
ISAC Reply 1F deleted from MRC CWJJ.
ISAC Reply 1G deleted from MRC CWJJ.
ISAC Reply 1H deleted from MRC CWJJ.
ISAC Reply 1J deleted from MRC CWJJ.
ISAC Reply 1K deleted from MRC CWJJ.
ISAC Reply 1L deleted from MRC CWJJ.
ISAC Reply 1M deleted from MRC CWJJ.
ISAC Reply 1X deleted from MRC CWJJ.
ISAC Reply 1Z deleted from MRC CWJJ.
ISAC Reply 1A deleted from MRC CWJJ.
ISAC Reply 1B deleted from MRC CWJJ.
ISAC Reply 1C deleted from MRC CWJJ.
ISAC Reply 1D deleted from MRC CWJJ.
ISAC Reply 1E deleted from MRC CWJJ.
ISAC Reply 1F deleted from MRC CWJJ.
ISAC Reply 1G deleted from MRC CWJJ.
ISAC Reply 1H deleted from MRC CWJJ.
ISAC Reply 1J deleted from MRC CWJJ.
ISAC Reply 1K deleted from MRC CWJJ.
ISAC Reply 1L deleted from MRC CWJJ.
ISAC Reply 1M deleted from MRC CWJJ.
ISAC Reply 1N deleted from MRC CWJJ.
ISAC Reply 1P deleted from MRC CWJJ.
ISAC Reply 1Q deleted from MRC CWJJ.
ISAC Reply 1R deleted from MRC CWJJ.
ISAC Reply 1S deleted from MRC CWJJ.
ISAC Reply 1T deleted from MRC CWJJ.
ISAC Reply 1U deleted from MRC CWJJ.
ISAC Reply 1V deleted from MRC CWJJ.
ISAC Reply 1W deleted from MRC CWJJ.
ISAC Reply 1X deleted from MRC CWJJ.
ISAC Reply 1Y deleted from MRC CWJJ.
ISAC Reply 1Z deleted from MRC CWJJ.
ISAC Reply 3AEE added to MRC CTRM.
ISAC Reply 3BNZ added to MRC CTRM.
ISAC Reply 3HOU added to MRC CTRM.
ISAC Reply 1A deleted from MRC CTRM.
ISAC Reply 1B deleted from MRC CTRM.
ISAC Reply 1C deleted from MRC CTRM.
ISAC Reply 1D deleted from MRC CTRM.
ISAC Reply 1E deleted from MRC CTRM.
ISAC Reply 1F deleted from MRC CTRM.
ISAC Reply 1G deleted from MRC CTRM.
ISAC Reply 1H deleted from MRC CTRM.
ISAC Reply 1J deleted from MRC CTRM.
ISAC Reply 1K deleted from MRC CTRM.
ISAC Reply 1L deleted from MRC CTRM.
ISAC Reply 1M deleted from MRC CTRM.
ISAC Reply 1X deleted from MRC CTRM.
ISAC Reply 1Z deleted from MRC CTRM.
ISAC Reply 1A deleted from MRC CTRM.
ISAC Reply 1B deleted from MRC CTRM.
ISAC Reply 1C deleted from MRC CTRM.
ISAC Reply 1D deleted from MRC CTRM.
ISAC Reply 1E deleted from MRC CTRM.
ISAC Reply 1F deleted from MRC CTRM.
ISAC Reply 1G deleted from MRC CTRM.
ISAC Reply 1H deleted from MRC CTRM.
ISAC Reply 1J deleted from MRC CTRM.
ISAC Reply 1K deleted from MRC CTRM.
ISAC Reply 1L deleted from MRC CTRM.
ISAC Reply 1M deleted from MRC CTRM.
ISAC Reply 1N deleted from MRC CTRM.
ISAC Reply 1P deleted from MRC CTRM.
ISAC Reply 1Q deleted from MRC CTRM.
ISAC Reply 1R deleted from MRC CTRM.
ISAC Reply 1S deleted from MRC CTRM.
ISAC Reply 1T deleted from MRC CTRM.
ISAC Reply 1U deleted from MRC CTRM.
ISAC Reply 1V deleted from MRC CTRM.
ISAC Reply 1W deleted from MRC CTRM.
ISAC Reply 1X deleted from MRC CTRM.
ISAC Reply 1Y deleted from MRC CTRM.
ISAC Reply 1Z deleted from MRC CTRM.
ISAC Reply 3AEE added to MRC AEXD.
ISAC Reply 3BKS added to MRC AEXD.
ISAC Reply 3BKT added to MRC AEXD.
ISAC Reply 3BKU added to MRC AEXD.
ISAC Reply 3BLG added to MRC AEXD.
ISAC Reply 3BLI added to MRC AEXD.
ISAC Reply 3BNX added to MRC AEXD.
ISAC Reply 3BNZ added to MRC AEXD.
ISAC Reply 3BOA added to MRC AEXD.
ISAC Reply 3BOC added to MRC AEXD.
ISAC Reply 3BOK added to MRC AEXD.
ISAC Reply 3BOL added to MRC AEXD.
ISAC Reply 3BOU added to MRC AEXD.
ISAC Reply 3HOU added to MRC AEXD.
ISAC Reply 1A deleted from MRC AEXD.
ISAC Reply 1B deleted from MRC AEXD.
ISAC Reply 1C deleted from MRC AEXD.
ISAC Reply 1D deleted from MRC AEXD.
ISAC Reply 1E deleted from MRC AEXD.
ISAC Reply 1F deleted from MRC AEXD.
ISAC Reply 1G deleted from MRC AEXD.
ISAC Reply 1H deleted from MRC AEXD.
ISAC Reply 1J deleted from MRC AEXD.
ISAC Reply 1K deleted from MRC AEXD.
ISAC Reply 1L deleted from MRC AEXD.
ISAC Reply 1M deleted from MRC AEXD.
ISAC Reply 1X deleted from MRC AEXD.
ISAC Reply 1Z deleted from MRC AEXD.
ISAC Reply 1A deleted from MRC AEXD.
ISAC Reply 1B deleted from MRC AEXD.
ISAC Reply 1C deleted from MRC AEXD.
ISAC Reply 1D deleted from MRC AEXD.
ISAC Reply 1E deleted from MRC AEXD.
ISAC Reply 1F deleted from MRC AEXD.
ISAC Reply 1G deleted from MRC AEXD.
ISAC Reply 1H deleted from MRC AEXD.
ISAC Reply 1J deleted from MRC AEXD.
ISAC Reply 1K deleted from MRC AEXD.
ISAC Reply 1L deleted from MRC AEXD.
ISAC Reply 1M deleted from MRC AEXD.
ISAC Reply 1N deleted from MRC AEXD.
ISAC Reply 1P deleted from MRC AEXD.
ISAC Reply 1Q deleted from MRC AEXD.
ISAC Reply 1R deleted from MRC AEXD.
ISAC Reply 1S deleted from MRC AEXD.
ISAC Reply 1T deleted from MRC AEXD.
ISAC Reply 1U deleted from MRC AEXD.
ISAC Reply 1V deleted from MRC AEXD.
ISAC Reply 1W deleted from MRC AEXD.
ISAC Reply 1X deleted from MRC AEXD.
ISAC Reply 1Y deleted from MRC AEXD.
ISAC Reply 1Z deleted from MRC AEXD.
ISAC Reply 3AEE added to MRC CTDS.
ISAC Reply 3BPG added to MRC CTDS.
ISAC Reply 3BPI added to MRC CTDS.
ISAC Reply 3BPO added to MRC CTDS.
ISAC Reply 3BRY added to MRC CTDS.
ISAC Reply 3BZC added to MRC CTDS.
ISAC Reply 3BZD added to MRC CTDS.
ISAC Reply 3BZP added to MRC CTDS.
ISAC Reply 3BZU added to MRC CTDS.
ISAC Reply 3CBI added to MRC CTDS.
ISAC Reply 3HOU added to MRC CTDS.
ISAC Reply 1A deleted from MRC CTDS.
ISAC Reply 1B deleted from MRC CTDS.
ISAC Reply 1C deleted from MRC CTDS.
ISAC Reply 1D deleted from MRC CTDS.
ISAC Reply 1E deleted from MRC CTDS.
ISAC Reply 1F deleted from MRC CTDS.
ISAC Reply 1G deleted from MRC CTDS.
ISAC Reply 1H deleted from MRC CTDS.
ISAC Reply 1J deleted from MRC CTDS.
ISAC Reply 1K deleted from MRC CTDS.
ISAC Reply 1L deleted from MRC CTDS.
ISAC Reply 1M deleted from MRC CTDS.
ISAC Reply 1N deleted from MRC CTDS.
ISAC Reply 1P deleted from MRC CTDS.
ISAC Reply 1Q deleted from MRC CTDS.
ISAC Reply 1R deleted from MRC CTDS.
ISAC Reply 1S deleted from MRC CTDS.
ISAC Reply 1T deleted from MRC CTDS.
ISAC Reply 1U deleted from MRC CTDS.
ISAC Reply 1V deleted from MRC CTDS.
ISAC Reply 1W deleted from MRC CTDS.
ISAC Reply 1X deleted from MRC CTDS.
ISAC Reply 1Y deleted from MRC CTDS.
ISAC Reply 1Z deleted from MRC CTDS.
ISAC Reply 1A deleted from MRC CTDS.
ISAC Reply 1B deleted from MRC CTDS.
ISAC Reply 1C deleted from MRC CTDS.
ISAC Reply 1D deleted from MRC CTDS.
ISAC Reply 1E deleted from MRC CTDS.
ISAC Reply 1F deleted from MRC CTDS.
ISAC Reply 1G deleted from MRC CTDS.
ISAC Reply 1H deleted from MRC CTDS.
ISAC Reply 1J deleted from MRC CTDS.
ISAC Reply 1K deleted from MRC CTDS.
ISAC Reply 1L deleted from MRC CTDS.
ISAC Reply 1M deleted from MRC CTDS.
ISAC Reply 1N deleted from MRC CTDS.
ISAC Reply 1P deleted from MRC CTDS.
ISAC Reply 1Q deleted from MRC CTDS.
ISAC Reply 1R deleted from MRC CTDS.
ISAC Reply 1S deleted from MRC CTDS.
ISAC Reply 1T deleted from MRC CTDS.
ISAC Reply 1U deleted from MRC CTDS.
ISAC Reply 1V deleted from MRC CTDS.
ISAC Reply 1W deleted from MRC CTDS.
ISAC Reply 1Y deleted from MRC CTDS.
ISAC Reply 1Z deleted from MRC CTDS.
ISAC Reply 1A deleted from MRC CTDS.
ISAC Reply 1B deleted from MRC CTDS.
ISAC Reply 1C deleted from MRC CTDS.
ISAC Reply 1D deleted from MRC CTDS.
ISAC Reply 1E deleted from MRC CTDS.
ISAC Reply 1F deleted from MRC CTDS.
ISAC Reply 1G deleted from MRC CTDS.
ISAC Reply 1H deleted from MRC CTDS.
ISAC Reply 1J deleted from MRC CTDS.
ISAC Reply 1K deleted from MRC CTDS.
ISAC Reply 1L deleted from MRC CTDS.
ISAC Reply 1M deleted from MRC CTDS.
ISAC Reply 1N deleted from MRC CTDS.
ISAC Reply 1P deleted from MRC CTDS.
ISAC Reply 1Q deleted from MRC CTDS.
ISAC Reply 1R deleted from MRC CTDS.
ISAC Reply 1S deleted from MRC CTDS.
ISAC Reply 1T deleted from MRC CTDS.
ISAC Reply 1U deleted from MRC CTDS.
ISAC Reply 1V deleted from MRC CTDS.
ISAC Reply 1W deleted from MRC CTDS.
ISAC Reply 1X deleted from MRC CTDS.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED00119*)
IF STYLE/REPLY CODE(s) A1, A2, A3 OR A4 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAV and ABHP)
IF STYLE/REPLY CODE(s) A5, A6, A7, A8 OR A9 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ABMK and ABKW)
IF STYLE/REPLY CODE(s) A10, A11, A12, A13, A14, A15 OR A1A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ABMK and ABKW)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLA6)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAM1312 | A1 | ROUND FRAME, ROUND LENS TYPE |
| AAM1321 | A10 | PARTIAL FIXTURE POST TYPE |
| AAM1322 | A11 | HALF FIXTURE POST TYPE |
| AAM1323 | A12 | FULL FIXTURE POST TYPE |
| AAM1324 | A13 | SINGLE STRIP TYPE |
| AAM1325 | A14 | MULTIPLE STRIP TYPE |
| AAM1326 | A15 | MULTIPLE STRIP TYPE |
| AAM1327 | A1A | ROUND FRAME, RECTANGULAR LENS TYPE |
| AAM1313 | A2 | SHELL FRAME TYPE |
| AAM1314 | A3 | TRAP TYPE |
| AAM1315 | A4 | SLOT TYPE |
| AAM1316 | A5 | INSTRUMENT POST TYPE |
| AAM1317 | A6 | VARIABLE APERTURE POST TYPE |
| AAM1318 | A7 | SPECIAL POST TYPE |
| AAM1319 | A8 | HALF FIXTURE EYEBROW TYPE |
| AAM1320 | A9 | RECTANGULAR FRAME TYPE |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAA2.0*;ABHPJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAA2.0*;ABKWJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAA2.0*;ABMKJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAA2.0*;ADAVJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3BKLDCU0098*;MATT3BKLDCU0098$DPCZ000*;MATT3BKLDCU0098$$DPCZ000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3AWI | LENS |
| 3BKL | ILLUMINATION DIRECTING DEVICE |
| 3BKM | REFLECTOR |
| 3BKN | LENS HOLDER |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL2011 | ALUMINUM ALLOY 2011 |
| AL2017 | ALUMINUM ALLOY 2017 |
| AL0181 | ALUMINUM ALLOY 2017A |
| AL2024 | ALUMINUM ALLOY 2024 |
| AL3003 | ALUMINUM ALLOY 3003 |
| AL0045 | ALUMINUM ALLOY 355.0 |
| AL0046 | ALUMINUM ALLOY 356.0 |
| AL5052 | ALUMINUM ALLOY 5052 |
| AL6061 | ALUMINUM ALLOY 6061 |
| CUB000 | COPPER ALLOY |
| CU0074 | COPPER ALLOY 230 |
| CU0076 | COPPER ALLOY 240 |
| CU0079 | COPPER ALLOY 260 |
| CU0304 | COPPER ALLOY 262 |
| CU0080 | COPPER ALLOY 268 |
| CU0081 | COPPER ALLOY 270 |
| CU0272 | COPPER ALLOY 272 |
| CU0274 | COPPER ALLOY 274 |
| CU0302 | COPPER ALLOY 280 |
| CU0330 | COPPER ALLOY 330 |
| CU0305 | COPPER ALLOY 331 |
| CU0332 | COPPER ALLOY 332 |
| CU0335 | COPPER ALLOY 335 |
| CU0340 | COPPER ALLOY 340 |
| CU0088 | COPPER ALLOY 342 |
| CU0306 | COPPER ALLOY 344 |
| CU0307 | COPPER ALLOY 345 |
| CU0308 | COPPER ALLOY 347 |
| CU0309 | COPPER ALLOY 348 |
| CU0310 | COPPER ALLOY 350 |
| CU0089 | COPPER ALLOY 353 |
| CU0090 | COPPER ALLOY 356 |
| CU0091 | COPPER ALLOY 360 |
| CU0370 | COPPER ALLOY 370 |
| CU0092 | COPPER ALLOY 377 |
| CU0098 | COPPER ALLOY 462 |
| CU0099 | COPPER ALLOY 464 |
| CU0465 | COPPER ALLOY 465 |
| CU0466 | COPPER ALLOY 466 |
| CU0467 | COPPER ALLOY 467 |
| CU0100 | COPPER ALLOY 482 |
| CU0101 | COPPER ALLOY 485 |
| GSA000 | GLASS |
| GSD000 | GLASS CRYSTAL |
| GSB000 | GLASS FIBER |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| PDA000 | PALLADIUM |
| PPA000 | PAPER |
| PCA000 | PLASTIC |
| PCD000 | PLASTIC ACRYLIC |
| PCAX00 | PLASTIC ACRYLONITRILE |
| PCH000 | PLASTIC EPOXY |
| PCM000 | PLASTIC PHENOL-FORMALDEHYDE |
| PCN000 | PLASTIC PHENOLIC |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCR000 | PLASTIC POLYCARBONATE |
| PCZ000 | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE |
| PCAD00 | PLASTIC POLYSTYRENE |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| RCA000 | RUBBER NATURAL |
| RCB000 | RUBBER SYNTHETIC |
| STA000 | STEEL |
| ST1052 | STEEL COMP 1052 |
| ST0302 | STEEL COMP 302 |
| ST0303 | STEEL COMP 303 |
| ST0304 | STEEL COMP 304 |
| STB000 | STEEL CORROSION RESISTING |
| ZNB000 | ZINC |
| ZNA000 | ZINC ALLOY |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3BKMDANA000*;SFTT3BKMDANA000$DZNA000*;SFTT3BKMDANA000$$DZNA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3BKL | ILLUMINATION DIRECTING DEVICE |
| 3BKM | REFLECTOR |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (SF01) | Reply |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CMA000 | CHROMATE |
| CRA000 | CHROMIUM |
| CUA000 | COPPER |
| DCA000 | DICHROMATE |
| AUA000 | GOLD |
| GFA000 | GRAPHITE |
| IRA000 | IRIDIUM |
| LQA000 | LACQUER |
| PBA000 | LEAD |
| NLA000 | NICKEL |
| XXB000 | OXIDE |
| XXA000 | OXIDE FILM |
| PNA000 | PAINT |
| PDA000 | PALLADIUM |
| PSA000 | PASSIVATE |
| PHA000 | PHOSPHATE |
| PTA000 | PLATINUM |
| PRA000 | PRIMER |
| RHA000 | RHODIUM |
| RCA000 | RUBBER |
| AGA000 | SILVER |
| SNA000 | TIN |
| VAA000 | VARNISH |
| ZNA000 | ZINC |
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
CRHXJLAMP TYPE ACCOMMODATED AND QUANTITY
INDICATES THE TYPE AND NUMBER OF LAMPS THAT THE ITEM CAN ACCOMMODATE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(CRHXJAF2*;CRHXJAF2$$JAF3*)
| Table 1 |
| Reply Code (AD48) | Reply |
| CR | GLEAM |
| AF | INCANDESCENT |
| CJ | INCANDESCENT LAMP CARTRIDGE |
| CH | LIGHT EMITTING DIODE |
| CK | LIGHT EMITTING DIODE LAMP CARTRIDGE |
| AK | NEON |
| CL | NEON LAMP CARTRIDGE |
AFAX*ALAMP INDUSTRY NUMBER
THE MEANS ESTABLISHED TO IDENTIFY THE LAMP BY AN INDUSTRY STANDARD NUMBER.
Enter the alpha-numeric reply with a minimum of one character.
(AFAXAS4)
AEWU*ALAMP BULB SIZE DESIGNATOR
THE DESIGNATION THAT DESCRIBES THE SIZE AND CONFIGURATION OF A LAMP BULB.
Enter the alpha-numeric reply with a minimum of one character.
(AEWUAS4)
AEUJ*DLAMP BASE TYPE ACCOMMODATED
INDICATES THE TYPE OF LAMP BASE THE ITEM WILL ACCOMMODATE.
Enter the applicable reply code from the table below
(AEUJDCE*;AEUJDBW$DAR*;AEUJDBW$$DAR*)
| Table 1 |
| Reply Code (AD36) | Reply |
| AA | ADMEDIUM SCREW |
| AB | ADMEDIUM SCREW SKIRTED |
| AE | BRASS FERRULE |
| AF | CANDELABRA SCREW |
| AG | CANDELABRA SCREW SKIRTED |
| AH | CARTRIDGE TWO PIN POLARIZED |
| AP | DOUBLE CONTACT BAYONET CANDELABRA |
| AQ | DOUBLE CONTACT BAYONET CANDELABRA EXPORT |
| AR | DOUBLE CONTACT BAYONET CANDELABRA INDEXING |
| AT | DOUBLE CONTACT BAYONET PINLESS |
| AU | DOUBLE CONTACT CANDELABRA PREFOCUS |
| AW | DOUBLE CONTACT MEDIUM RING |
| AX | DOUBLE CONTACT MINATURE FLANGED |
| BD | FLEXIBLE WIRE LEADS |
| BL | INTERMEDIATE SCREW |
| BM | INTERMEDIATE SCREW EXPORT |
| BN | KNURLED SCREW |
| BU | MEDIUM PREFOCUS |
| BV | MEDIUM SCREW |
| BW | MEDIUM SCREW EXPORT |
| BX | MEDIUM SCREW SKIRTED |
| BZ | METAL SLEEVE WITH FLEXIBLE WIRE LEADS |
| CA | MIDGET FLANGED |
| CB | MIDGET GROOVED |
| CC | MIDGET SCREW |
| CD | MINIATURE BAYONET |
| CE | MINIATURE BAYONET PINLESS |
| CH | MINIATURE CANDELABRA SCREW |
| CM | MINIATURE SCREW |
| CN | MINIATURE TWO PIN |
| CT | MOGUL PREFOCUS |
| CU | MOGUL SCREW |
| CV | MOGUL SCREW EXPORT |
| DC | RECESSED SINGLE CONTACT |
| DE | SINGLE CONTACT BAYONET CANDELABRA |
| DF | SINGLE CONTACT BAYONET CANDELABRA EXPORT |
| DG | SINGLE CONTACT BAYONET CANDELABRA INDEXING |
| FH | SINGLE CONTACT BAYONET PINLESS |
| DJ | SINGLE CONTACT CANDELABRA PINLESS |
| DK | SINGLE CONTACT CANDELABRA PREFOCUS |
| DM | SINGLE CONTACT MINIATURE FLANGED |
| DQ | SPADE SINGLE CONTACT TERMINAL |
| DS | SPECIAL MINIATURE, ONE AND ONE-HALF TURN THREAD |
| DU | SPECIAL NO.10-64 THREAD |
| DX | SUBMIDGET FLANGED |
| DY | SUBMINIATURE TWO PIN |
| EE | TELEPHONE SLIDE NO.ONE |
| EF | TELEPHONE SLIDE NO.TWO |
| EG | TELEPHONE SLIDE SPECIAL |
| EJ | THREE CONTACT MEDIUM BAYONET |
| EK | THREE CONTACT MEDIUM SCREW |
| EL | THREE CONTACT MOGUL SCREW |
| EU | UNTHREADED CYLINDER W/SCREW TERMINAL |
| EW | WEDGE |
| EX | WIRE TERMINALS, DOWN |
Reference NotesRefer to Reference Drawings for assitance in answering this MRC.
AEXC*ALENS QUANTITY
THE NUMBER OF LENSES INCLUDED WITH THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AEXCA10*)
ATAS*DLENS MOUNTING METHOD
THE MEANS BY WHICH THE LENS IS MOUNTED TO AN ITEM.
Enter the applicable reply code from the table below
(ATASDAFR)
| Table 1 |
| Reply Code (AB89) | Reply |
| AFZ | BAYONET |
| ACH | BRACKET |
| ADA | FLANGE |
| AGA | FRICTION |
| ALB | PUSH IN |
| AFR | PUSH ON |
| ALC | SCREW IN |
| ALD | SCREW ON |
CRQG*DLENS TYPE
INDICATES THE TYPE OF LENS PROVIDED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CRQG3BOADBN*;CRQG3BOADBN$DAF*;CRQG3BOADBN$$DAF*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BKS | FIRST ROW FIRST POSITION HORIZONTAL |
| 3BKU | FIRST ROW SECOND POSITION HORIZONTAL |
| 3BNZ | SINGLE LIGHT FIRST POSITION HORIZONTAL |
| 3BOA | SINGLE LIGHT FIRST POSITION VERTICAL |
| 3BOD | SINGLE LIGHT THIRD POSITION HORIZONTAL |
| 3BOK | SINGLE ROW FIRST POSITION HORIZONTAL |
| 3BOL | SINGLE ROW FIRST POSITION VERTICAL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP19) | Reply |
| AD | CONVEX, KNURLED |
| AE | CONVEX, KNURLED, THREADED SHANK |
| AF | CONVEX, LARGE BUBBLE |
| AJ | CONVEX, SMALL BUBBLE |
| AK | CONVEX, SNAP |
| AP | CYLINDRICAL |
| AQ | CYLINDRICAL, EXTERNAL THREAD |
| AR | CYLINDRICAL, KNURLED |
| AW | DISPLAY SCREEN |
| BB | DOME, KNURLED, INTERNAL THREAD |
| BA | DOME, KNURLED, THREADED SHANK |
| DF | DOME, SQUARE END CAP |
| BK | FLAT, EDGE |
| BL | FLAT, EDGE W/BOOT |
| BN | FLAT, KNURLED |
| BP | FLAT, KNURLED, EXTERNAL THREAD |
| BQ | FLAT, KNURLED, THREADED SHANK |
| BR | FLAT, NARROW |
| BX | FLAT, RECTANGULAR |
| BY | FLAT, RECTANGULAR, FRAMED |
| CB | FLAT, ROUND |
| CC | FLAT, ROUND SHANK |
| CD | FLAT, SNAP |
| DG | FLAT, SQUARE END CAP |
| CG | FLAT, SQUARE SHANK |
| CH | FLAT, THREADED SHANK |
| CL | ROUND, SEGMENTED |
| CM | ROUND, SHOULDERED |
| CQ | STOVEPIPE, EXTERNAL THREAD |
| CS | STOVEPIPE, KNURLED |
| CT | STOVEPIPE, KNURLED, THREADED SHANK |
| CW | STOVEPIPE, LONG SHANK |
| CX | STOVEPIPE, PLAIN |
| CY | STOVEPIPE, SHORT SHANK |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
CSKH*DLENS LIGHT TRANSMISSION CHARACTERISTIC
AN INDICATION OF THE LIGHT TRANSMISSION CHARACTERISTIC OF THE LENS.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CSKH3BKUDAJ*;CSKH3BKUDAJ$DAE*;CSKH3BKUDAJ$$DAE*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BKS | FIRST ROW FIRST POSITION HORIZONTAL |
| 3BKU | FIRST ROW SECOND POSITION HORIZONTAL |
| 3BLI | FIRST ROW ELEVENTH POSITION VERTICAL |
| 3BNZ | SINGLE LIGHT FIRST POSITION HORIZONTAL |
| 3BOA | SINGLE LIGHT FIRST POSITION VERTICAL |
| 3BOK | SINGLE ROW FIRST POSITION HORIZONTAL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AF93) | Reply |
| AE | OPAQUE |
| AH | TRANSLUCENT |
| AJ | TRANSPARENT |
CWJJ*DLENS FACE SURFACE CONDITION
THE CONDITION OF THE LENS FACE WITH RESPECT TO THE TEXTURE OF THE SURFACE.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CWJJ3BLIDPB*;CWJJ3BLIDPB$DSD*;CWJJ3BLIDPB$$DSD*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BLI | FIRST ROW ELEVENTH POSITION VERTICAL |
| 3BNZ | SINGLE LIGHT FIRST POSITION HORIZONTAL |
| 3BOA | SINGLE LIGHT FIRST POSITION VERTICAL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN72) | Reply |
| AE | ACID ETCHED |
| AS | ASYMMETRICAL |
| CC | CONCENTRIC RINGS |
| CH | CROSS HATCHED |
| DG | DIVERGENCE |
| EC | ETCHED |
| FS | FACETED |
| FL | FLUTED |
| FZ | FRESNEL |
| FR | FROSTED |
| GD | GROOVED |
| HM | HAMMERED |
| HC | HONEYCOMB |
| MT | MATTED |
| LS | OPALESCENT |
| PN | PAINTED |
| PB | PEBBLED |
| PM | PRISMATIC |
| SM | SMOOTH |
| SD | STIPPLED |
| SY | SYMMETRICAL |
CTRM*DLENS BACK SURFACE CONDITION
INDICATES THE SURFACE CONDITION OF THE LENS BACK.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CTRM3BNZDSD*;CTRM3BNZDSD$DFL*;CTRM3BNZDSD$$DFL*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BNZ | SINGLE LIGHT FIRST POSITION HORIZONTAL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN72) | Reply |
| AE | ACID ETCHED |
| AS | ASYMMETRICAL |
| CC | CONCENTRIC RINGS |
| CH | CROSS HATCHED |
| DG | DIVERGENCE |
| EC | ETCHED |
| FS | FACETED |
| FL | FLUTED |
| FZ | FRESNEL |
| FR | FROSTED |
| GD | GROOVED |
| HM | HAMMERED |
| HC | HONEYCOMB |
| MT | MATTED |
| LS | OPALESCENT |
| PN | PAINTED |
| PB | PEBBLED |
| PM | PRISMATIC |
| SM | SMOOTH |
| SD | STIPPLED |
| SY | SYMMETRICAL |
AEXD*DLENS COLOR
THE HUE OR TINT OF THE LENS.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AEXD3AEEDGR0069*;AEXD3AEEDGR0069$DBL0053*;AEXD3AEEDGR0069$$DBL0053*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BKS | FIRST ROW FIRST POSITION HORIZONTAL |
| 3BKT | FIRST ROW FIRST POSITION VERTICAL |
| 3BKU | FIRST ROW SECOND POSITION HORIZONTAL |
| 3BLG | FIRST ROW NINTH POSITION VERTICAL |
| 3BLI | FIRST ROW ELEVENTH POSITION VERTICAL |
| 3BNX | ELEVENTH ROW FIRST POSITION HORIZONTAL |
| 3BNZ | SINGLE LIGHT FIRST POSITION HORIZONTAL |
| 3BOA | SINGLE LIGHT FIRST POSITION VERTICAL |
| 3BOC | SINGLE LIGHT SECOND POSITION VERTICAL |
| 3BOK | SINGLE ROW FIRST POSITION HORIZONTAL |
| 3BOL | SINGLE ROW FIRST POSITION VERTICAL |
| 3BOU | SINGLE ROW SIXTH POSITION HORIZONTAL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD06) | Reply |
| AL0000 | ALUMINUM |
| AM0000 | AMBER |
| AM0004 | AMBER, TRANSLUCENT |
| AV0000 | AVOCADO |
| BE0000 | BEIGE |
| BL0000 | BLACK |
| BL0036 | BLACK, DULL |
| BL0033 | BLACK, FED STD 595, 37038 |
| BL0039 | BLACK, LUSTERLESS |
| BL0004 | BLACK, OPAQUE |
| BL0053 | BLACK, TRANSLUCENT |
| BU0000 | BLUE |
| BU0055 | BLUE GREEN |
| BU0001 | BLUE, AVIATION, MIL-C-25050 TYPE 1 |
| BU0017 | BLUE, COBALT |
| BU0002 | BLUE, DAYLIGHT |
| BU0152 | BLUE, FED STD 595, 15080 |
| BU0026 | BLUE, LIGHT |
| BU0004 | BLUE-WHITE |
| BR0000 | BROWN |
| CL0001 | COLORLESS |
| CT0001 | COPPER |
| CR0000 | CREAM |
| MS0001 | DAYLIGHT |
| GY0029 | GRAY, FED STD 595, 36231 |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0069 | GREEN, AVIATION |
| GR0001 | GREEN, AVIATION, MIL-C-25050 TYPE 1 |
| GR0154 | GREEN, FED STD 3, CATEGORY 1 |
| GR0155 | GREEN, IDENTIFICATION |
| GR0002 | GREEN, IDENTIFICATION, MIL-C-25050 TYPE 2 |
| GR0032 | GREEN, LIGHT |
| GR0466 | GREEN, MIL-STD-3009, NVIS TYPE I, CLASS A |
| GR0473 | GREEN, MIL-STD-3009, NVIS TYPE I, CLASS B |
| GR0474 | GREEN, MIL-STD-3009, NVIS TYPE II, CLASS A |
| GR0475 | GREEN, MIL-STD-3009, NVIS TYPE II, CLASS B |
| GR0034 | GREEN, NILE |
| GR0042 | GREEN, YELLOW |
| GR0153 | GREEN-YELLOW, TENNESSEE EASTMAN COMPANY, 14686 |
| VY0000 | IVORY |
| LD0000 | OLIVE DRAB |
| RG0000 | ORANGE |
| PU0000 | PURPLE |
| RE0000 | RED |
| RE0081 | RED, AVIATION |
| RE0002 | RED, AVIATION, MIL-C-25050 TYPE 1 |
| RE0118 | RED, FED STD 3, CATEGORY 1 |
| RE0119 | RED, IDENTIFICATION |
| RE0003 | RED, IDENTIFICATION, MIL-C-25050 TYPE 2 |
| RE0117 | RED, INSTRUMENT |
| RE0004 | RED, INSTRUMENT AND PANEL LIGHTING, MIL-C-25050, TYPE 1 |
| RE0272 | RED, MIL-STD-3009, NVIS TYPE I, CLASS A |
| RE0274 | RED, MIL-STD-3009, NVIS TYPE I, CLASS B |
| RE0275 | RED, MIL-STD-3009, NVIS TYPE II, CLASS A |
| RE0276 | RED, MIL-STD-3009, NVIS TYPE II, CLASS B |
| RE0020 | RUBY |
| UV0000 | ULTRAVIOLET |
| WH0000 | WHITE |
| WH0061 | WHITE, AVIATION |
| WH0002 | WHITE, AVIATION, MIL-C-25050 TYPE 1 |
| WH0003 | WHITE, CHALK |
| WH0060 | WHITE, INSTRUMENT |
| WH0004 | WHITE, LUNAR |
| WH0001 | WHITE, LUNAR IDENTIFICATION, MIL-C-25050 TYPE 2 |
| WH0042 | WHITE, MILK |
| WH0039 | WHITE, OPALESCENT |
| WH0019 | WHITE, OPAQUE |
| WH0062 | WHITE, ROHM AND HAAS, 122125 |
| WH0012 | WHITE, TRANSLUCENT |
| WH0021 | WHITE, TRANSPARENT |
| YE0000 | YELLOW |
| YE0094 | YELLOW, AVIATION |
| YE0002 | YELLOW, AVIATION, MIL-C-25050 TYPE 1 |
| YE0095 | YELLOW, FED STD 3, CATEGORY 1 |
| YE0096 | YELLOW, FED STD 3, CATEGORY 2 |
| YE0003 | YELLOW, IDENTIFICATION, MIL-C-25050 TYPE 2 |
| YE0018 | YELLOW, LIGHT |
| YE0207 | YELLOW, MIL-STD-3009, NVIS TYPE I, CLASS A |
| YE0208 | YELLOW, MIL-STD-3009, NVIS TYPE I, CLASS B |
| YE0209 | YELLOW, MIL-STD-3009, NVIS TYPE II, CLASS A |
| YE0210 | YELLOW, MIL-STD-3009, NVIS TYPE II, CLASS B |
| YE0009 | YELLOW, PALE |
CTDS*DTRANSMITTED LIGHT COLOR
THE HUE OR TINT OF THE TRANSMITTED LIGHT.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CTDS3BPODBL0036*;CTDS3BPODBL0036$DRE0272*;CTDS3BPODBL0036$$DRE0272*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BPG | FIRST ROW FIRST POSITION HORIZONTAL VERTICAL SPLIT DISPLAY DIVISION A |
| 3BPI | FIRST ROW FIRST POSITION HORIZONTAL HORIZONTAL SPLIT DISPLAY DIVISION A |
| 3BPO | FIRST ROW FIRST POSITION HORIZONTAL 4WAY SPLIT DISPLAY DIVISION A |
| 3BRY | SECOND ROW SECOND POSITION HORIZONTAL HORIZONTAL SPLIT DISPLAY DIVISION B |
| 3BZC | SINGLE LIGHT FIRST POSITION HORIZONTAL HORIZONTAL SPLIT DISPLAY DIVISION A |
| 3BZD | SINGLE LIGHT FIRST POSITION HORIZONTAL HORIZONTAL SPLIT DISPLAY DIVISION B |
| 3BZP | SINGLE LIGHT FIRST POSITION HORIZONTAL FULL DISPLAY DIVISION A |
| 3BZU | SINGLE LIGHT FIRST POSITION VERTICAL FULL DISPLAY DIVISION A |
| 3CBI | SINGLE ROW FIRST POSITION VERTICAL FULL DISPLAY DIVISION A |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD06) | Reply |
| AL0000 | ALUMINUM |
| AM0000 | AMBER |
| AM0004 | AMBER, TRANSLUCENT |
| AV0000 | AVOCADO |
| BE0000 | BEIGE |
| BL0000 | BLACK |
| BL0036 | BLACK, DULL |
| BL0033 | BLACK, FED STD 595, 37038 |
| BL0039 | BLACK, LUSTERLESS |
| BL0004 | BLACK, OPAQUE |
| BL0053 | BLACK, TRANSLUCENT |
| BU0000 | BLUE |
| BU0055 | BLUE GREEN |
| BU0001 | BLUE, AVIATION, MIL-C-25050 TYPE 1 |
| BU0017 | BLUE, COBALT |
| BU0002 | BLUE, DAYLIGHT |
| BU0152 | BLUE, FED STD 595, 15080 |
| BU0026 | BLUE, LIGHT |
| BU0004 | BLUE-WHITE |
| BR0000 | BROWN |
| CL0001 | COLORLESS |
| CT0001 | COPPER |
| CR0000 | CREAM |
| MS0001 | DAYLIGHT |
| GY0029 | GRAY, FED STD 595, 36231 |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0069 | GREEN, AVIATION |
| GR0001 | GREEN, AVIATION, MIL-C-25050 TYPE 1 |
| GR0154 | GREEN, FED STD 3, CATEGORY 1 |
| GR0155 | GREEN, IDENTIFICATION |
| GR0002 | GREEN, IDENTIFICATION, MIL-C-25050 TYPE 2 |
| GR0032 | GREEN, LIGHT |
| GR0466 | GREEN, MIL-STD-3009, NVIS TYPE I, CLASS A |
| GR0473 | GREEN, MIL-STD-3009, NVIS TYPE I, CLASS B |
| GR0474 | GREEN, MIL-STD-3009, NVIS TYPE II, CLASS A |
| GR0475 | GREEN, MIL-STD-3009, NVIS TYPE II, CLASS B |
| GR0034 | GREEN, NILE |
| GR0042 | GREEN, YELLOW |
| GR0153 | GREEN-YELLOW, TENNESSEE EASTMAN COMPANY, 14686 |
| VY0000 | IVORY |
| LD0000 | OLIVE DRAB |
| RG0000 | ORANGE |
| PU0000 | PURPLE |
| RE0000 | RED |
| RE0081 | RED, AVIATION |
| RE0002 | RED, AVIATION, MIL-C-25050 TYPE 1 |
| RE0118 | RED, FED STD 3, CATEGORY 1 |
| RE0119 | RED, IDENTIFICATION |
| RE0003 | RED, IDENTIFICATION, MIL-C-25050 TYPE 2 |
| RE0117 | RED, INSTRUMENT |
| RE0004 | RED, INSTRUMENT AND PANEL LIGHTING, MIL-C-25050, TYPE 1 |
| RE0272 | RED, MIL-STD-3009, NVIS TYPE I, CLASS A |
| RE0274 | RED, MIL-STD-3009, NVIS TYPE I, CLASS B |
| RE0275 | RED, MIL-STD-3009, NVIS TYPE II, CLASS A |
| RE0276 | RED, MIL-STD-3009, NVIS TYPE II, CLASS B |
| RE0020 | RUBY |
| UV0000 | ULTRAVIOLET |
| WH0000 | WHITE |
| WH0061 | WHITE, AVIATION |
| WH0002 | WHITE, AVIATION, MIL-C-25050 TYPE 1 |
| WH0003 | WHITE, CHALK |
| WH0060 | WHITE, INSTRUMENT |
| WH0004 | WHITE, LUNAR |
| WH0001 | WHITE, LUNAR IDENTIFICATION, MIL-C-25050 TYPE 2 |
| WH0042 | WHITE, MILK |
| WH0039 | WHITE, OPALESCENT |
| WH0019 | WHITE, OPAQUE |
| WH0062 | WHITE, ROHM AND HAAS, 122125 |
| WH0012 | WHITE, TRANSLUCENT |
| WH0021 | WHITE, TRANSPARENT |
| YE0000 | YELLOW |
| YE0094 | YELLOW, AVIATION |
| YE0002 | YELLOW, AVIATION, MIL-C-25050 TYPE 1 |
| YE0095 | YELLOW, FED STD 3, CATEGORY 1 |
| YE0096 | YELLOW, FED STD 3, CATEGORY 2 |
| YE0003 | YELLOW, IDENTIFICATION, MIL-C-25050 TYPE 2 |
| YE0018 | YELLOW, LIGHT |
| YE0207 | YELLOW, MIL-STD-3009, NVIS TYPE I, CLASS A |
| YE0208 | YELLOW, MIL-STD-3009, NVIS TYPE I, CLASS B |
| YE0209 | YELLOW, MIL-STD-3009, NVIS TYPE II, CLASS A |
| YE0210 | YELLOW, MIL-STD-3009, NVIS TYPE II, CLASS B |
| YE0009 | YELLOW, PALE |
AXGYDMOUNTING METHOD
THE MEANS OF ATTACHING THE ITEM.
Enter the applicable reply code from the table below
(AXGYDAAC*;AXGYDACB$DAGQ*;AXGYDACB$$DAGQ*)
| Table 1 |
| Reply Code (AM39) | Reply |
| AAC | BOLT |
| ABC | BRACKET |
| BJY | BULKHEAD |
| ABH | CLAMP |
| AFL | CLIP |
| AEM | COMPRESSION |
| BJZ | DECK |
| ACR | FLANGE |
| AGQ | FLUSH |
| ABL | FRICTION |
| AFZ | GLAND NUT |
| AGJ | INTEGRAL THREADED NUT |
| AED | PANEL |
| AEE | PLATE |
| ABR | RACK |
| AHT | RING |
| AHW | SAFETY PIN |
| ABW | SCREW |
| AKC | SLEEVE |
| ADF | SNAP-IN |
| ACB | STRAP |
| AAE | STUD |
| BCZ | SWAGE |
| AFA | THREADED BUSHING |
| AHF | THREADED HOLE |
| BPH | THREADED HUB |
| AKF | TRIPOD |
| ACQ | UNTHREADED HOLE |
AEXZ*JPANEL ACCOMMODATION HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE ACCOMMODATION FOR THE PANEL OPENING FOR WHICH THE ITEM IS DESIGNED,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEXZJAA2.0*;AEXZJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BZWG*JPANEL THICKNESS FOR WHICH DESIGNED
A MEASUREMENT OF THE SMALLEST DIMENSION OF THE PANEL FOR WHICH THE ITEM IS DESIGNED,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BZWGJAA2.0*;BZWGJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
TTQYJTERMINAL TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF TERMINALS FOR PROVIDING ELECTRICAL CONNECTION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(TTQYJAFF2*;TTQYJAFF2$$JAFF3*)
| Table 1 |
| Reply Code (AN89) | Reply |
| AEQ | BAYONET PLUG, DOUBLE CONTACT |
| AER | BAYONET PLUG, SINGLE CONTACT |
| ADB | CLIP |
| AES | CLIP, COMPRESSION |
| AET | CLIP, COMPRESSION, FLAT SPRING |
| ACN | CONNECTOR, PLUG |
| AAF | CONNECTOR, RECEPTACLE |
| AFL | CRIMP |
| AAJ | FLANGE |
| ADA | QUICK DISCONNECT, FEMALE |
| ACZ | QUICK DISCONNECT, MALE |
| ABQ | SCREW |
| ACY | SOCKET |
| AFF | SOLDER LUG |
| AFY | SOLDER LUG W/SCREW |
| AAS | SOLDER STUD |
| ABB | TAB, SOLDER LUG |
| ACB | TURRET |
| ACC | WIRE LEAD |
| AFM | WIRE WRAP |
ABFE*DHAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION
THE SPECIFIC COMMERCIAL RATING WHICH CLASSES THE ITEM AS TO WHAT DEGREE THE ITEM WILL WITHSTAND ENVIRONMENTAL ELEMENTS AND/OR HAZARDOUS LOCATIONS.
Enter the applicable reply code from the table below
(ABFEDCD*;ABFEDEJ$$DAN*)
| Table 1 |
| Reply Code (AB27) | Reply |
| FF | ABRASION RESISTANT |
| AA | ACID RESISTANT |
| GD | COLD RESISTANT |
| DJ | CORROSION RESISTANT |
| CG | DRIPPROOF |
| FS | DRIPTIGHT |
| AC | DRIPTIGHT-NEMA TYPE 2 |
| EF | DUST RESISTANT |
| CF | DUSTPROOF |
| AD | DUSTPROOF-NEMA TYPE 13 |
| DY | DUSTTIGHT |
| FC | ELECTROMAGNETIC RADIATION SUPPRESSIVE |
| CE | EXPLOSION PROOF |
| AF | EXPLOSION PROOF NEC CL.I, GP.ABCD;CL.II, GP.EFG;CL.III |
| AJ | EXPLOSION PROOF NEC CL.I, GP.CD;CL.II, GP.EFG;CL.III |
| AK | EXPLOSION PROOF NEC CL.I, GP.D;CL.II, GP.EFG;CL.III |
| AN | EXPLOSION PROOF NEC CL.II, GP.EFG;CL.III |
| CH | FUNGUS RESISTANT |
| AT | GASTIGHT |
| AP | GENERAL PURPOSE-NEMA TYPE 1 |
| DR | HEAT RESISTANT |
| GE | HUMIDITY RESISTANT |
| GM | IMPACT RESISTANT |
| DV | MOISTURE PROOF |
| BR | MOISTURE RESISTANT |
| CJ | OILTIGHT |
| AQ | OILTIGHT-NEMA TYPE 11 |
| CD | OZONE RESISTANT |
| BL | RADIO FREQUENCY INTERFERENCE |
| GC | SALT SPRAY PROOF |
| FZ | SALT SPRAY RESISTANT |
| DT | SALT WATER RESISTANT |
| FY | SAND PROOF |
| CV | SAND RESISTANT |
| EN | SANDTIGHT |
| DU | SHATTER RESISTANT |
| EJ | SHOCK PROOF |
| EP | SHOCK RESISTANT |
| BT | SPLASHPROOF |
| CL | SPRAYTIGHT |
| EK | VAPOR PROOF |
| ES | VAPORTIGHT |
| GB | VIBRATION RESISTANT |
| CM | WATERPROOF |
| CN | WATERTIGHT |
| EW | WATERTIGHT, MIL-E-2036 |
| AU | WATERTIGHT-NEMA TYPE 4 |
| DX | WEATHERPROOF |
| AV | WEATHERPROOF-NEMA TYPE 3 |
TMQY*JFURNISHED ITEMS AND QUANTITY
THE NAME AND NUMBER OF THOSE PARTS FURNISHED WITH THE ITEM OF SUPPLY THAT HAVE NOT BEEN SPECIFIED ELSEWHERE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(TMQYJABW2*;TMQYJABW2$$JABW3*)
| Table 1 |
| Reply Code (AB28) | Reply |
| ASN | BULB BOOT |
| AWK | CLEAR PLASTIC DIFFUSER |
| ABD | COLOR FILTER |
| AXG | DUMMY PLUG |
| BNE | FLANGE |
| ACA | FLAT WASHER |
| ACN | GASKET |
| ASP | HEXAGON NUT |
| ATP | INSULATOR |
| BGJ | KNURLED FLANGE RING |
| AWM | KNURLED NUT |
| ASA | LAMP |
| ACB | LOCK WASHER |
| AWH | MOUNTING SLEEVE |
| ABW | NUT |
| AXZ | O-RING |
| BGG | RETAINER |
| AMX | SCREW |
| AFH | SEAL |
| ATD | SPACER |
| ASQ | SPANNER NUT |
| ASR | SPEED CLIP |
| ABH | SWITCH |
| AST | TWIST LOCK PLUG CONNECTOR |
| AJW | WASHER |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDBEX*;CBBLDAJE$$DAJC*)
| Table 1 |
| Reply Code (AN47) | Reply |
| AJB | BLACKOUT DEGREE, COMPLETE |
| AJC | BLACKOUT DEGREE, PARTIAL |
| AJE | DIMMING DEVICE |
| BET | LAMP PROTECTION DEVICE |
| BEW | LENS PROTECTION DEVICE |
| AJH | LIGHT ADJUSTMENT LOCKING DEVICE |
| AJK | NONTURN FEATURE |
| AEG | PRESS TO TEST |
| AJN | REFLECTIVE LENS |
| BEX | REFLECTOR |
| AJP | REMOVABLE LIGHT FILTER |
| AJX | TRANSFORMER |
| BEZ | TRANSISTOR |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCF2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
| CD | CUBIC DECIMETERS |
| CF | CUBIC FEET |
| CN | CUBIC INCHES |
| CM | CUBIC METERS |
AFJN*DFRAGILITY FACTOR
THE MEASURE OF SENSITIVITY OF THE ITEM TO BE PACKAGED. A FACTOR USED BY PACKAGING ENGINEERS IN DEVISING PROPER CUSHIONING IN A PACKAGE.
Enter the applicable reply code from the table below
(AFJNDB)
| Table 1 |
| Reply Code (AD40) | Reply |
| D | DELICATE |
| B | EXTREMELY FRAGILE |
| E | MODERATELY DELICATE |
| F | MODERATELY RUGGED |
| G | RUGGED |
| C | VERY DELICATE |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDAGA000*;PRMTDRTA000$$DPDA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJPDA000R2.0*;PMWTJPDA000R2.0$$JPDA000R2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJAUA0002.0*;PMLCJAUA0002.0$$JAUA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAV6)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAV6)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.
(NTRDA80-05-28*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)